! Started logfile: J2131-1207_S_1996_01_02_yyk_uvs.log on Sun Jan 7 19:59:25 2007 obs J2131-1207_S_1996_01_02_yyk_uva.fits ! Reading UV FITS file: J2131-1207_S_1996_01_02_yyk_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.924691 visibilities/baseline/integration-bin. ! Found source: J2131-1207 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 623 lines of history. ! ! Reading 11984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2131-1207_S_1996_01_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.7663 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.835 mas, bmaj=7.212 mas, bpa=1.387 degrees ! Estimated noise=2157.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.35289 Jy ! Component: 100 - total flux cleaned = 1.67226 Jy ! Total flux subtracted in 100 components = 1.67226 Jy ! Clean residual min=-0.106193 max=0.165147 Jy/beam ! Clean residual mean=0.001185 rms=0.036161 Jy/beam ! Combined flux in latest and established models = 1.67226 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.67226 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.696670Jy sigma=0.002496 ! Fit after self-cal, rms=0.696201Jy sigma=0.002493 ! Inverting map and beam ! Estimated beam: bmin=2.835 mas, bmaj=7.212 mas, bpa=1.387 degrees ! Estimated noise=2157.87 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.492 mas, bmaj=9.27 mas, bpa=-2.742 degrees ! Estimated noise=1579.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.103372 Jy ! Component: 100 - total flux cleaned = 0.115059 Jy ! Component: 150 - total flux cleaned = 0.120957 Jy ! Component: 200 - total flux cleaned = 0.126157 Jy ! Total flux subtracted in 200 components = 0.126157 Jy ! Clean residual min=-0.087917 max=0.107831 Jy/beam ! Clean residual mean=0.000006 rms=0.028856 Jy/beam ! Combined flux in latest and established models = 1.79842 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 15 components and 1.79842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.677671Jy sigma=0.002429 ! Fit after self-cal, rms=0.677635Jy sigma=0.002428 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.492 x 9.27 at -2.742 degrees (North through East) ! Clean map min=-0.089159 max=1.4481 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00799 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.41 KP 0.81 ! LA 1.09 MK 0.95 NL 0.86 OV 1.00 ! PT 0.94 SC 0.84 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.958874 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.11 HN 1.53 KP 0.86 ! LA 1.19 MK 1.00 NL 0.90 OV 0.98 ! PT 0.90 SC 0.88 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00891 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 1.34 KP 0.83 ! LA 0.90 MK 0.87 NL 0.95 OV 0.90 ! PT 1.07 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.954336 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.11 HN 1.49 KP 0.90 ! LA 1.00 MK 1.01 NL 1.05 OV 0.88 ! PT 1.06 SC 0.92 ! ! ! Fit before self-cal, rms=0.677635Jy sigma=0.002428 ! Fit after self-cal, rms=0.609711Jy sigma=0.002168 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.609711Jy sigma=0.002168 ! Fit after self-cal, rms=0.609805Jy sigma=0.002168 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=8.868 mas, bpa=-1.461 degrees ! Estimated noise=1481.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0568109 Jy ! Component: 100 - total flux cleaned = -0.0731138 Jy ! Component: 150 - total flux cleaned = -0.0766668 Jy ! Component: 200 - total flux cleaned = -0.0778479 Jy ! Total flux subtracted in 200 components = -0.0778479 Jy ! Clean residual min=-0.022589 max=0.046792 Jy/beam ! Clean residual mean=0.000843 rms=0.009574 Jy/beam ! Combined flux in latest and established models = 1.72057 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 1.72057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.606776Jy sigma=0.002149 ! Fit after self-cal, rms=0.606764Jy sigma=0.002148 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.606764Jy sigma=0.002148 ! Fit after self-cal, rms=0.558703Jy sigma=0.001959 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, -17). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446214 Jy ! Component: 100 - total flux cleaned = 0.0422771 Jy ! Component: 150 - total flux cleaned = 0.0397905 Jy ! Component: 200 - total flux cleaned = 0.0392452 Jy ! Total flux subtracted in 200 components = 0.0392452 Jy ! Clean residual min=-0.020948 max=0.033040 Jy/beam ! Clean residual mean=0.000675 rms=0.007521 Jy/beam ! Combined flux in latest and established models = 1.75982 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 1.75982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554612Jy sigma=0.001943 ! Fit after self-cal, rms=0.545317Jy sigma=0.001908 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.441 x 8.868 at -1.461 degrees (North through East) ! Clean map min=-0.024777 max=1.3934 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.545317Jy sigma=0.001908 ! Fit after self-cal, rms=0.523176Jy sigma=0.001869 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.523176Jy sigma=0.001869 ! Fit after self-cal, rms=0.521407Jy sigma=0.001862 ! Inverting map and beam ! Estimated beam: bmin=3.398 mas, bmaj=8.759 mas, bpa=-1.413 degrees ! Estimated noise=1468.91 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265361 Jy ! Component: 100 - total flux cleaned = 0.0298209 Jy ! Component: 150 - total flux cleaned = 0.0302799 Jy ! Component: 200 - total flux cleaned = 0.0300043 Jy ! Total flux subtracted in 200 components = 0.0300044 Jy ! Clean residual min=-0.016743 max=0.025369 Jy/beam ! Clean residual mean=0.000434 rms=0.005908 Jy/beam ! Combined flux in latest and established models = 1.78982 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 77 components and 1.78982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.520084Jy sigma=0.001857 ! Fit after self-cal, rms=0.519436Jy sigma=0.001855 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.519436Jy sigma=0.001855 ! Fit after self-cal, rms=0.515388Jy sigma=0.001850 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.515388Jy sigma=0.001850 ! Fit after self-cal, rms=0.515287Jy sigma=0.001850 ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=8.728 mas, bpa=-1.486 degrees ! Estimated noise=1466.48 mJy/beam. ! Added new window around map position (-20, -31.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282771 Jy ! Component: 100 - total flux cleaned = 0.0430294 Jy ! Component: 150 - total flux cleaned = 0.0512112 Jy ! Component: 200 - total flux cleaned = 0.0542117 Jy ! Total flux subtracted in 200 components = 0.0542117 Jy ! Clean residual min=-0.012092 max=0.016350 Jy/beam ! Clean residual mean=0.000307 rms=0.003816 Jy/beam ! Combined flux in latest and established models = 1.84403 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 108 components and 1.84403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.514278Jy sigma=0.001844 ! Fit after self-cal, rms=0.514099Jy sigma=0.001843 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.458 mas, bmaj=17.19 mas, bpa=8.453 degrees ! Estimated noise=1826.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00497152 Jy ! Component: 100 - total flux cleaned = 0.00689934 Jy ! Component: 150 - total flux cleaned = 0.00731252 Jy ! Component: 200 - total flux cleaned = 0.00748681 Jy ! Total flux subtracted in 200 components = 0.00748681 Jy ! Clean residual min=-0.012467 max=0.014406 Jy/beam ! Clean residual mean=0.000502 rms=0.004464 Jy/beam ! Combined flux in latest and established models = 1.85152 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 132 components and 1.85152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513965Jy sigma=0.001842 ! Fit after self-cal, rms=0.513887Jy sigma=0.001842 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=6.977 mas, bpa=2.664 degrees ! Estimated noise=2018.93 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.29134 Jy ! Component: 100 - total flux cleaned = 1.59412 Jy ! Component: 150 - total flux cleaned = 1.70184 Jy ! Component: 200 - total flux cleaned = 1.75147 Jy ! Total flux subtracted in 200 components = 1.75147 Jy ! Clean residual min=-0.020351 max=0.023163 Jy/beam ! Clean residual mean=0.000730 rms=0.006195 Jy/beam ! Combined flux in latest and established models = 1.75147 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 1.75147 Jy ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=8.728 mas, bpa=-1.486 degrees ! Estimated noise=1466.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0372797 Jy ! Component: 100 - total flux cleaned = 0.059425 Jy ! Component: 150 - total flux cleaned = 0.0730069 Jy ! Component: 200 - total flux cleaned = 0.0791465 Jy ! Total flux subtracted in 200 components = 0.0791465 Jy ! Clean residual min=-0.012319 max=0.013055 Jy/beam ! Clean residual mean=0.000403 rms=0.003886 Jy/beam ! Combined flux in latest and established models = 1.83061 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 76 components and 1.83061 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.458 mas, bmaj=17.19 mas, bpa=8.453 degrees ! Estimated noise=1826.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102563 Jy ! Component: 100 - total flux cleaned = 0.0149016 Jy ! Component: 150 - total flux cleaned = 0.0175373 Jy ! Component: 200 - total flux cleaned = 0.0182273 Jy ! Total flux subtracted in 200 components = 0.0182273 Jy ! Clean residual min=-0.012968 max=0.012141 Jy/beam ! Clean residual mean=0.000557 rms=0.004254 Jy/beam ! Combined flux in latest and established models = 1.84884 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 1.84884 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=8.728 mas, bpa=-1.486 degrees ! Estimated noise=1466.48 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00243655 Jy ! Component: 100 - total flux cleaned = -0.00336301 Jy ! Component: 150 - total flux cleaned = -0.00336724 Jy ! Component: 200 - total flux cleaned = -0.00286537 Jy ! Total flux subtracted in 200 components = -0.00286537 Jy ! Clean residual min=-0.011306 max=0.012562 Jy/beam ! Clean residual mean=0.000309 rms=0.003457 Jy/beam ! Combined flux in latest and established models = 1.84598 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 120 components and 1.84598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.514069Jy sigma=0.001842 ! Fit after self-cal, rms=0.513934Jy sigma=0.001842 wmodel J2131-1207_S_1996_01_02_yyk\_map.mod ! Writing 120 model components to file: J2131-1207_S_1996_01_02_yyk_map.mod wobs J2131-1207_S_1996_01_02_yyk\_uvs.fits ! Writing UV FITS file: J2131-1207_S_1996_01_02_yyk_uvs.fits wwins J2131-1207_S_1996_01_02_yyk\_map.win ! wwins: Wrote 3 windows to J2131-1207_S_1996_01_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214013 Jy ! Component: 100 - total flux cleaned = 0.00156184 Jy ! Component: 150 - total flux cleaned = 0.0011975 Jy ! Component: 200 - total flux cleaned = 0.00103081 Jy ! Component: 250 - total flux cleaned = 0.000394843 Jy ! Component: 300 - total flux cleaned = 0.000242874 Jy ! Component: 350 - total flux cleaned = -0.000187184 Jy ! Component: 400 - total flux cleaned = -0.000184239 Jy ! Component: 450 - total flux cleaned = 7.50552e-05 Jy ! Component: 500 - total flux cleaned = 0.000318688 Jy ! Component: 550 - total flux cleaned = 0.000320052 Jy ! Component: 600 - total flux cleaned = 0.000997758 Jy ! Component: 650 - total flux cleaned = 0.00110235 Jy ! Component: 700 - total flux cleaned = 0.00142263 Jy ! Component: 750 - total flux cleaned = 0.00183562 Jy ! Component: 800 - total flux cleaned = 0.00183674 Jy ! Component: 850 - total flux cleaned = 0.00261727 Jy ! Component: 900 - total flux cleaned = 0.00309322 Jy ! Component: 950 - total flux cleaned = 0.00393115 Jy ! Component: 1000 - total flux cleaned = 0.004294 Jy ! Component: 1050 - total flux cleaned = 0.00500381 Jy ! Component: 1100 - total flux cleaned = 0.00543754 Jy ! Component: 1150 - total flux cleaned = 0.00595226 Jy ! Component: 1200 - total flux cleaned = 0.00654143 Jy ! Component: 1250 - total flux cleaned = 0.00703734 Jy ! Component: 1300 - total flux cleaned = 0.00777064 Jy ! Component: 1350 - total flux cleaned = 0.00865474 Jy ! Component: 1400 - total flux cleaned = 0.009367 Jy ! Component: 1450 - total flux cleaned = 0.00999203 Jy ! Component: 1500 - total flux cleaned = 0.010763 Jy ! Component: 1550 - total flux cleaned = 0.0114463 Jy ! Component: 1600 - total flux cleaned = 0.0124199 Jy ! Component: 1650 - total flux cleaned = 0.0130854 Jy ! Component: 1700 - total flux cleaned = 0.0138149 Jy ! Component: 1750 - total flux cleaned = 0.0144623 Jy ! Component: 1800 - total flux cleaned = 0.0153145 Jy ! Component: 1850 - total flux cleaned = 0.0158764 Jy ! Component: 1900 - total flux cleaned = 0.0167771 Jy ! Component: 1950 - total flux cleaned = 0.0175967 Jy ! Component: 2000 - total flux cleaned = 0.0183371 Jy ! Total flux subtracted in 2048 components = 0.0188695 Jy ! Clean residual min=-0.003875 max=0.004111 Jy/beam ! Clean residual mean=0.000173 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 1.86485 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 238 components and 1.86485 Jy ![Exited script file: muppet] wmap "J2131-1207_S_1996_01_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.381 x 8.728 at -1.486 degrees (North through East) ! Clean map min=-0.0089348 max=1.4065 Jy/beam ! Writing clean map to FITS file: J2131-1207_S_1996_01_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.40649 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00141011 device "J2131-1207_S_1996_01_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J2131-1207_S_1996_01_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.300771 0.300771 0.601542 1.20308 2.40617 4.81234 9.62467 19.2493 38.4987 76.9974 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0042 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.406 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.381 x 8.728 at -1.486 degrees (North through East) ! Clean map min=-0.0089348 max=1.4065 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2131-1207_S_1996_01_02_yyk\_map.gif/gif" ! Attempting to open device: 'J2131-1207_S_1996_01_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2131-1207_S_1996_01_02_yyk_uvs.log closed on Sun Jan 7 19:59:31 2007