! Started logfile: J2000-1748_S_1997_08_27_yyk_uvs.log on Sun Jan 7 19:44:56 2007 obs J2000-1748_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J2000-1748_S_1997_08_27_yyk_uva.fits ! AN table 1: 53 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.607547 visibilities/baseline/integration-bin. ! Found source: J2000-1748 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 5796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2000-1748_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.717515 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.496 mas, bmaj=6.628 mas, bpa=1.176 degrees ! Estimated noise=3126.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.538599 Jy ! Component: 100 - total flux cleaned = 0.60775 Jy ! Total flux subtracted in 100 components = 0.60775 Jy ! Clean residual min=-0.027399 max=0.035886 Jy/beam ! Clean residual mean=0.000016 rms=0.007808 Jy/beam ! Combined flux in latest and established models = 0.60775 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.60775 Jy ! ! Correcting IF 1. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.335267Jy sigma=0.001207 ! Fit after self-cal, rms=0.335208Jy sigma=0.001207 ! Inverting map and beam ! Estimated beam: bmin=2.496 mas, bmaj=6.628 mas, bpa=1.176 degrees ! Estimated noise=3126.77 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=7.662 mas, bpa=-1.749 degrees ! Estimated noise=2439.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00471232 Jy ! Component: 100 - total flux cleaned = -0.00529151 Jy ! Component: 150 - total flux cleaned = -0.00487446 Jy ! Component: 200 - total flux cleaned = -0.00418741 Jy ! Total flux subtracted in 200 components = -0.00418741 Jy ! Clean residual min=-0.018900 max=0.032865 Jy/beam ! Clean residual mean=0.000002 rms=0.007266 Jy/beam ! Combined flux in latest and established models = 0.603562 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 20 components and 0.603562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333544Jy sigma=0.001201 ! Fit after self-cal, rms=0.333509Jy sigma=0.001201 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.056 x 7.662 at -1.749 degrees (North through East) ! Clean map min=-0.019455 max=0.60311 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00944 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.09 HN 1.00* KP 0.92 ! LA 1.00 MK 1.00 NL 1.00* OV 1.07 ! PT 1.00* SC 0.85 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.983115 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.16 HN 1.00* KP 0.98 ! LA 1.06 MK 1.05 NL 0.96 OV 0.97 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0564 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 HN 1.00* KP 0.89 ! LA 0.81 MK 0.91 NL 0.91 OV 0.96 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0028 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.13 HN 1.00* KP 0.94 ! LA 0.89 MK 1.03 NL 1.06 OV 0.94 ! PT 1.00* SC 0.98 ! ! ! Fit before self-cal, rms=0.333509Jy sigma=0.001201 ! Fit after self-cal, rms=0.316445Jy sigma=0.001175 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316445Jy sigma=0.001175 ! Fit after self-cal, rms=0.316430Jy sigma=0.001175 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=7.543 mas, bpa=-0.8619 degrees ! Estimated noise=2466.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127671 Jy ! Component: 100 - total flux cleaned = 0.0146262 Jy ! Component: 150 - total flux cleaned = 0.0146286 Jy ! Component: 200 - total flux cleaned = 0.01463 Jy ! Total flux subtracted in 200 components = 0.01463 Jy ! Clean residual min=-0.009759 max=0.010332 Jy/beam ! Clean residual mean=0.000040 rms=0.003181 Jy/beam ! Combined flux in latest and established models = 0.618192 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.618192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315905Jy sigma=0.001173 ! Fit after self-cal, rms=0.315895Jy sigma=0.001173 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315895Jy sigma=0.001173 ! Fit after self-cal, rms=0.315030Jy sigma=0.001170 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153148 Jy ! Component: 100 - total flux cleaned = -0.000138714 Jy ! Component: 150 - total flux cleaned = -0.000226821 Jy ! Component: 200 - total flux cleaned = -0.000305837 Jy ! Total flux subtracted in 200 components = -0.000305837 Jy ! Clean residual min=-0.009474 max=0.010215 Jy/beam ! Clean residual mean=0.000039 rms=0.003143 Jy/beam ! Combined flux in latest and established models = 0.617886 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.617886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314971Jy sigma=0.001170 ! Fit after self-cal, rms=0.314881Jy sigma=0.001169 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.032 x 7.543 at -0.8619 degrees (North through East) ! Clean map min=-0.0092599 max=0.61597 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314881Jy sigma=0.001169 ! Fit after self-cal, rms=0.309988Jy sigma=0.001162 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309988Jy sigma=0.001162 ! Fit after self-cal, rms=0.309981Jy sigma=0.001162 ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=7.516 mas, bpa=-0.8407 degrees ! Estimated noise=2459.69 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185014 Jy ! Component: 100 - total flux cleaned = 0.00185173 Jy ! Component: 150 - total flux cleaned = 0.00168712 Jy ! Component: 200 - total flux cleaned = 0.00154519 Jy ! Total flux subtracted in 200 components = 0.00154519 Jy ! Clean residual min=-0.009414 max=0.010438 Jy/beam ! Clean residual mean=0.000057 rms=0.002916 Jy/beam ! Combined flux in latest and established models = 0.619432 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.619432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309935Jy sigma=0.001161 ! Fit after self-cal, rms=0.309938Jy sigma=0.001161 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309938Jy sigma=0.001161 ! Fit after self-cal, rms=0.309564Jy sigma=0.001160 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309564Jy sigma=0.001160 ! Fit after self-cal, rms=0.309567Jy sigma=0.001160 ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=7.493 mas, bpa=-0.8383 degrees ! Estimated noise=2462.16 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298969 Jy ! Component: 100 - total flux cleaned = 0.00320027 Jy ! Component: 150 - total flux cleaned = 0.00319934 Jy ! Component: 200 - total flux cleaned = 0.00319929 Jy ! Total flux subtracted in 200 components = 0.00319929 Jy ! Clean residual min=-0.009296 max=0.010392 Jy/beam ! Clean residual mean=0.000056 rms=0.002882 Jy/beam ! Combined flux in latest and established models = 0.622631 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.622631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309542Jy sigma=0.001160 ! Fit after self-cal, rms=0.309541Jy sigma=0.001160 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.053 mas, bmaj=16.62 mas, bpa=12.33 degrees ! Estimated noise=3212.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311831 Jy ! Component: 100 - total flux cleaned = 0.00310363 Jy ! Component: 150 - total flux cleaned = 0.00344269 Jy ! Component: 200 - total flux cleaned = 0.0036802 Jy ! Total flux subtracted in 200 components = 0.0036802 Jy ! Clean residual min=-0.009932 max=0.010006 Jy/beam ! Clean residual mean=0.000116 rms=0.003718 Jy/beam ! Combined flux in latest and established models = 0.626311 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.626311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309623Jy sigma=0.001160 ! Fit after self-cal, rms=0.309575Jy sigma=0.001160 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=6.577 mas, bpa=1.612 degrees ! Estimated noise=3087.08 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.5322 Jy ! Component: 100 - total flux cleaned = 0.606795 Jy ! Component: 150 - total flux cleaned = 0.615574 Jy ! Component: 200 - total flux cleaned = 0.615007 Jy ! Total flux subtracted in 200 components = 0.615007 Jy ! Clean residual min=-0.013901 max=0.011746 Jy/beam ! Clean residual mean=0.000010 rms=0.003415 Jy/beam ! Combined flux in latest and established models = 0.615007 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.615007 Jy ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=7.493 mas, bpa=-0.8383 degrees ! Estimated noise=2462.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400194 Jy ! Component: 100 - total flux cleaned = 0.00371177 Jy ! Component: 150 - total flux cleaned = 0.00369578 Jy ! Component: 200 - total flux cleaned = 0.00406561 Jy ! Total flux subtracted in 200 components = 0.00406561 Jy ! Clean residual min=-0.009837 max=0.011108 Jy/beam ! Clean residual mean=0.000066 rms=0.003074 Jy/beam ! Combined flux in latest and established models = 0.619073 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 26 components and 0.619073 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.053 mas, bmaj=16.62 mas, bpa=12.33 degrees ! Estimated noise=3212.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0061214 Jy ! Component: 100 - total flux cleaned = 0.00643317 Jy ! Component: 150 - total flux cleaned = 0.00671026 Jy ! Component: 200 - total flux cleaned = 0.00696024 Jy ! Total flux subtracted in 200 components = 0.00696024 Jy ! Clean residual min=-0.010048 max=0.010347 Jy/beam ! Clean residual mean=0.000126 rms=0.003803 Jy/beam ! Combined flux in latest and established models = 0.626033 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.626033 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=7.493 mas, bpa=-0.8383 degrees ! Estimated noise=2462.16 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00450095 Jy ! Component: 100 - total flux cleaned = -0.00470438 Jy ! Component: 150 - total flux cleaned = -0.00472198 Jy ! Component: 200 - total flux cleaned = -0.00473188 Jy ! Total flux subtracted in 200 components = -0.00473188 Jy ! Clean residual min=-0.009474 max=0.010460 Jy/beam ! Clean residual mean=0.000060 rms=0.002906 Jy/beam ! Combined flux in latest and established models = 0.621301 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.621301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309607Jy sigma=0.001160 ! Fit after self-cal, rms=0.309591Jy sigma=0.001160 wmodel J2000-1748_S_1997_08_27_yyk\_map.mod ! Writing 40 model components to file: J2000-1748_S_1997_08_27_yyk_map.mod wobs J2000-1748_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J2000-1748_S_1997_08_27_yyk_uvs.fits wwins J2000-1748_S_1997_08_27_yyk\_map.win ! wwins: Wrote 1 windows to J2000-1748_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302785 Jy ! Component: 100 - total flux cleaned = 0.00304913 Jy ! Component: 150 - total flux cleaned = 0.00218197 Jy ! Component: 200 - total flux cleaned = 0.00150899 Jy ! Component: 250 - total flux cleaned = 0.000754278 Jy ! Component: 300 - total flux cleaned = 0.000167577 Jy ! Component: 350 - total flux cleaned = -0.00039221 Jy ! Component: 400 - total flux cleaned = -0.00144891 Jy ! Component: 450 - total flux cleaned = -0.00215079 Jy ! Component: 500 - total flux cleaned = -0.00291649 Jy ! Component: 550 - total flux cleaned = -0.0030993 Jy ! Component: 600 - total flux cleaned = -0.00336183 Jy ! Component: 650 - total flux cleaned = -0.003197 Jy ! Component: 700 - total flux cleaned = -0.00352021 Jy ! Component: 750 - total flux cleaned = -0.00359364 Jy ! Component: 800 - total flux cleaned = -0.00336954 Jy ! Component: 850 - total flux cleaned = -0.0033701 Jy ! Component: 900 - total flux cleaned = -0.00323423 Jy ! Component: 950 - total flux cleaned = -0.00343433 Jy ! Component: 1000 - total flux cleaned = -0.00349752 Jy ! Component: 1050 - total flux cleaned = -0.00318422 Jy ! Component: 1100 - total flux cleaned = -0.00306294 Jy ! Component: 1150 - total flux cleaned = -0.00282698 Jy ! Component: 1200 - total flux cleaned = -0.00271252 Jy ! Component: 1250 - total flux cleaned = -0.00254693 Jy ! Component: 1300 - total flux cleaned = -0.00243968 Jy ! Component: 1350 - total flux cleaned = -0.00243819 Jy ! Component: 1400 - total flux cleaned = -0.00213278 Jy ! Component: 1450 - total flux cleaned = -0.00208348 Jy ! Component: 1500 - total flux cleaned = -0.00203523 Jy ! Component: 1550 - total flux cleaned = -0.00208277 Jy ! Component: 1600 - total flux cleaned = -0.00208271 Jy ! Component: 1650 - total flux cleaned = -0.00203627 Jy ! Component: 1700 - total flux cleaned = -0.00217237 Jy ! Component: 1750 - total flux cleaned = -0.00221708 Jy ! Component: 1800 - total flux cleaned = -0.00221688 Jy ! Component: 1850 - total flux cleaned = -0.00221618 Jy ! Component: 1900 - total flux cleaned = -0.00208685 Jy ! Component: 1950 - total flux cleaned = -0.00208699 Jy ! Component: 2000 - total flux cleaned = -0.00200274 Jy ! Total flux subtracted in 2048 components = -0.0018353 Jy ! Clean residual min=-0.002759 max=0.002903 Jy/beam ! Clean residual mean=0.000018 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.619466 Jy keep ! Adding 113 model components to the UV plane model. ! The established model now contains 153 components and 0.619466 Jy ![Exited script file: muppet] wmap "J2000-1748_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3 x 7.493 at -0.8383 degrees (North through East) ! Clean map min=-0.0066435 max=0.61472 Jy/beam ! Writing clean map to FITS file: J2000-1748_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.614724 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000833067 device "J2000-1748_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2000-1748_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.406556 0.406556 0.813113 1.62623 3.25245 6.5049 13.0098 26.0196 52.0392 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.614 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3 x 7.493 at -0.8383 degrees (North through East) ! Clean map min=-0.0066435 max=0.61472 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2000-1748_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2000-1748_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2000-1748_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 19:45:01 2007