! Started logfile: J1924-2914_X_1996_03_13_yyk_uvs.log on Mon Jan  8 09:42:41 2007
obs J1924-2914_X_1996_03_13_yyk_uva.fits
! Reading UV FITS file: J1924-2914_X_1996_03_13_yyk_uva.fits
! AN table 1: 132 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.454209 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1924-2914
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15049e+09        4e+06          1        4e+06
!  02        2  8.23236e+09        4e+06          1        4e+06
!  03        3  8.41236e+09        4e+06          1        4e+06
!  04        4  8.55236e+09        4e+06          1        4e+06
! 
! Polarization(s): RR
! 
! Read 655 lines of history.
! 
! Reading 10792 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1924-2914_X_1996_03_13_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 12.0764 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6755 mas, bmaj=1.73 mas, bpa=-7.253 degrees
! Estimated noise=1951.6 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 9.2684 Jy
! Component: 100  -  total flux cleaned = 11.5265 Jy
! Total flux subtracted in 100 components = 11.5265 Jy
! Clean residual min=-0.485931 max=0.781862 Jy/beam
! Clean residual mean=-0.009055 rms=0.162553 Jy/beam
! Combined flux in latest and established models = 11.5265 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 11.5265 Jy
! 
! Correcting IF 1.
!  A total of 466 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 466 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 466 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 466 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=4.060007Jy  sigma=0.022901
! Fit after  self-cal, rms=4.049961Jy  sigma=0.022853
! Inverting map and beam 
! Estimated beam: bmin=0.6755 mas, bmaj=1.73 mas, bpa=-7.252 degrees
! Estimated noise=1951.93 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.91 mas, bmaj=2.289 mas, bpa=-4.973 degrees
! Estimated noise=1207.55 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.53844 Jy
! Component: 100  -  total flux cleaned = 2.06729 Jy
! Component: 150  -  total flux cleaned = 2.28192 Jy
! Component: 200  -  total flux cleaned = 2.34761 Jy
! Total flux subtracted in 200 components = 2.34761 Jy
! Clean residual min=-0.431742 max=0.680363 Jy/beam
! Clean residual mean=-0.007245 rms=0.157360 Jy/beam
! Combined flux in latest and established models = 13.8741 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 48 components and 13.8741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=3.862711Jy  sigma=0.020690
! Fit after  self-cal, rms=3.861493Jy  sigma=0.020686
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.91 x 2.289 at -4.973 degrees (North through East)
! Clean map  min=-0.41455  max=11.266 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.990264
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.91     HN        1.09     KP        1.18     
!   LA        0.99     MK        0.99     NL        1.07     OV        1.00*    
!   PT        0.94     SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.995125
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.90     HN        1.08     KP        1.20     
!   LA        0.97     MK        0.97     NL        1.04     OV        1.00*    
!   PT        0.92     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.984692
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.91     HN        1.07     KP        1.18     
!   LA        0.98     MK        1.02     NL        1.03     OV        1.00*    
!   PT        0.90     SC        1.06     
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.972742
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        1.11     KP        1.20     
!   LA        0.98     MK        1.01     NL        1.06     OV        1.00*    
!   PT        0.93     SC        1.06     
! 
! 
! Fit before self-cal, rms=3.861493Jy  sigma=0.020686
! Fit after  self-cal, rms=4.069711Jy  sigma=0.019495
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=4.069711Jy  sigma=0.019495
! Fit after  self-cal, rms=4.071150Jy  sigma=0.019494
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9251 mas, bmaj=2.323 mas, bpa=-5.6 degrees
! Estimated noise=1177.23 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.345589 Jy
! Component: 100  -  total flux cleaned = -0.446372 Jy
! Component: 150  -  total flux cleaned = -0.458106 Jy
! Component: 200  -  total flux cleaned = -0.460188 Jy
! Total flux subtracted in 200 components = -0.460188 Jy
! Clean residual min=-0.303490 max=0.376773 Jy/beam
! Clean residual mean=-0.001525 rms=0.085746 Jy/beam
! Combined flux in latest and established models = 13.4139 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 54 components and 13.4139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=4.043468Jy  sigma=0.019361
! Fit after  self-cal, rms=4.041476Jy  sigma=0.019358
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=4.041476Jy  sigma=0.019358
! Fit after  self-cal, rms=3.011579Jy  sigma=0.014163
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.218777 Jy
! Component: 100  -  total flux cleaned = 0.246208 Jy
! Component: 150  -  total flux cleaned = 0.254478 Jy
! Component: 200  -  total flux cleaned = 0.256759 Jy
! Total flux subtracted in 200 components = 0.256759 Jy
! Clean residual min=-0.327813 max=0.340819 Jy/beam
! Clean residual mean=0.000148 rms=0.090062 Jy/beam
! Combined flux in latest and established models = 13.6706 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 59 components and 13.6706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.999434Jy  sigma=0.014081
! Fit after  self-cal, rms=2.861661Jy  sigma=0.013356
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9251 x 2.323 at -5.6 degrees (North through East)
! Clean map  min=-0.32145  max=11.314 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.861661Jy  sigma=0.013356
! Fit after  self-cal, rms=2.716727Jy  sigma=0.012235
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.716727Jy  sigma=0.012235
! Fit after  self-cal, rms=2.711217Jy  sigma=0.012185
! Inverting map and beam 
! Estimated beam: bmin=0.9228 mas, bmaj=2.303 mas, bpa=-4.486 degrees
! Estimated noise=1168.6 mJy/beam.
! Added new window around map position (2.2, 5.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.318229 Jy
! Component: 100  -  total flux cleaned = 0.414234 Jy
! Component: 150  -  total flux cleaned = 0.436534 Jy
! Component: 200  -  total flux cleaned = 0.442079 Jy
! Total flux subtracted in 200 components = 0.442079 Jy
! Clean residual min=-0.103509 max=0.149036 Jy/beam
! Clean residual mean=0.000710 rms=0.037321 Jy/beam
! Combined flux in latest and established models = 14.1127 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 81 components and 14.1127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.686719Jy  sigma=0.011984
! Fit after  self-cal, rms=2.686475Jy  sigma=0.011974
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.686475Jy  sigma=0.011974
! Fit after  self-cal, rms=2.756228Jy  sigma=0.011824
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.756228Jy  sigma=0.011824
! Fit after  self-cal, rms=2.762027Jy  sigma=0.011837
! Inverting map and beam 
! Estimated beam: bmin=0.9167 mas, bmaj=2.289 mas, bpa=-4.66 degrees
! Estimated noise=1166.57 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.163212 Jy
! Component: 100  -  total flux cleaned = 0.223762 Jy
! Component: 150  -  total flux cleaned = 0.239048 Jy
! Component: 200  -  total flux cleaned = 0.247258 Jy
! Total flux subtracted in 200 components = 0.247258 Jy
! Clean residual min=-0.078104 max=0.107912 Jy/beam
! Clean residual mean=0.000384 rms=0.028438 Jy/beam
! Combined flux in latest and established models = 14.36 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 96 components and 14.36 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.756145Jy  sigma=0.011781
! Fit after  self-cal, rms=2.756003Jy  sigma=0.011776
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.435 mas, bmaj=6.133 mas, bpa=-1.181 degrees
! Estimated noise=1456.62 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0412692 Jy
! Component: 100  -  total flux cleaned = 0.0589919 Jy
! Component: 150  -  total flux cleaned = 0.0684878 Jy
! Component: 200  -  total flux cleaned = 0.0696348 Jy
! Total flux subtracted in 200 components = 0.0696348 Jy
! Clean residual min=-0.096709 max=0.112001 Jy/beam
! Clean residual mean=0.000872 rms=0.034570 Jy/beam
! Combined flux in latest and established models = 14.4296 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 106 components and 14.4296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.757092Jy  sigma=0.011771
! Fit after  self-cal, rms=2.755671Jy  sigma=0.011764
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6767 mas, bmaj=1.716 mas, bpa=-6.853 degrees
! Estimated noise=1929.71 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 9.37359 Jy
! Component: 100  -  total flux cleaned = 11.654 Jy
! Component: 150  -  total flux cleaned = 12.6457 Jy
! Component: 200  -  total flux cleaned = 13.1579 Jy
! Total flux subtracted in 200 components = 13.1579 Jy
! Clean residual min=-0.142123 max=0.214923 Jy/beam
! Clean residual mean=-0.001743 rms=0.044045 Jy/beam
! Combined flux in latest and established models = 13.1578 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 13.1578 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9167 mas, bmaj=2.289 mas, bpa=-4.66 degrees
! Estimated noise=1166.57 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 1).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.544013 Jy
! Component: 100  -  total flux cleaned = 0.839462 Jy
! Component: 150  -  total flux cleaned = 1.01801 Jy
! Component: 200  -  total flux cleaned = 1.12993 Jy
! Total flux subtracted in 200 components = 1.12993 Jy
! Clean residual min=-0.090071 max=0.087646 Jy/beam
! Clean residual mean=0.000014 rms=0.027193 Jy/beam
! Combined flux in latest and established models = 14.2878 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 86 components and 14.2878 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.435 mas, bmaj=6.133 mas, bpa=-1.181 degrees
! Estimated noise=1456.62 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0976992 Jy
! Component: 100  -  total flux cleaned = 0.114962 Jy
! Component: 150  -  total flux cleaned = 0.126355 Jy
! Component: 200  -  total flux cleaned = 0.133768 Jy
! Total flux subtracted in 200 components = 0.133768 Jy
! Clean residual min=-0.106921 max=0.102915 Jy/beam
! Clean residual mean=0.000724 rms=0.033917 Jy/beam
! Combined flux in latest and established models = 14.4216 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 118 components and 14.4216 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9167 mas, bmaj=2.289 mas, bpa=-4.66 degrees
! Estimated noise=1166.57 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101945 Jy
! Component: 100  -  total flux cleaned = 0.0146613 Jy
! Component: 150  -  total flux cleaned = 0.0184258 Jy
! Component: 200  -  total flux cleaned = 0.0216817 Jy
! Total flux subtracted in 200 components = 0.0216817 Jy
! Clean residual min=-0.085659 max=0.078390 Jy/beam
! Clean residual mean=0.000459 rms=0.023771 Jy/beam
! Combined flux in latest and established models = 14.4432 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 131 components and 14.4432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.755539Jy  sigma=0.011750
! Fit after  self-cal, rms=2.754976Jy  sigma=0.011748
wmodel J1924-2914_X_1996_03_13_yyk\_map.mod
! Writing 131 model components to file: J1924-2914_X_1996_03_13_yyk_map.mod
wobs J1924-2914_X_1996_03_13_yyk\_uvs.fits
! Writing UV FITS file: J1924-2914_X_1996_03_13_yyk_uvs.fits
wwins J1924-2914_X_1996_03_13_yyk\_map.win
! wwins: Wrote 3 windows to J1924-2914_X_1996_03_13_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0261163 Jy
! Component: 100  -  total flux cleaned = -0.0248477 Jy
! Component: 150  -  total flux cleaned = -0.0160689 Jy
! Component: 200  -  total flux cleaned = -0.00911643 Jy
! Component: 250  -  total flux cleaned = -0.0047235 Jy
! Component: 300  -  total flux cleaned = -0.00572764 Jy
! Component: 350  -  total flux cleaned = -0.00768708 Jy
! Component: 400  -  total flux cleaned = -0.00958225 Jy
! Component: 450  -  total flux cleaned = -0.0123461 Jy
! Component: 500  -  total flux cleaned = -0.0167272 Jy
! Component: 550  -  total flux cleaned = -0.0209297 Jy
! Component: 600  -  total flux cleaned = -0.0209365 Jy
! Component: 650  -  total flux cleaned = -0.0209432 Jy
! Component: 700  -  total flux cleaned = -0.0209551 Jy
! Component: 750  -  total flux cleaned = -0.0194666 Jy
! Component: 800  -  total flux cleaned = -0.0194873 Jy
! Component: 850  -  total flux cleaned = -0.019475 Jy
! Component: 900  -  total flux cleaned = -0.0180944 Jy
! Component: 950  -  total flux cleaned = -0.0194575 Jy
! Component: 1000  -  total flux cleaned = -0.01879 Jy
! Component: 1050  -  total flux cleaned = -0.0174943 Jy
! Component: 1100  -  total flux cleaned = -0.0149729 Jy
! Component: 1150  -  total flux cleaned = -0.0137495 Jy
! Component: 1200  -  total flux cleaned = -0.0125525 Jy
! Component: 1250  -  total flux cleaned = -0.0119756 Jy
! Component: 1300  -  total flux cleaned = -0.0137106 Jy
! Component: 1350  -  total flux cleaned = -0.0114333 Jy
! Component: 1400  -  total flux cleaned = -0.0108759 Jy
! Component: 1450  -  total flux cleaned = -0.0108776 Jy
! Component: 1500  -  total flux cleaned = -0.0114057 Jy
! Component: 1550  -  total flux cleaned = -0.00927972 Jy
! Component: 1600  -  total flux cleaned = -0.00980729 Jy
! Component: 1650  -  total flux cleaned = -0.00929069 Jy
! Component: 1700  -  total flux cleaned = -0.00878086 Jy
! Component: 1750  -  total flux cleaned = -0.00878707 Jy
! Component: 1800  -  total flux cleaned = -0.00879242 Jy
! Component: 1850  -  total flux cleaned = -0.00928265 Jy
! Component: 1900  -  total flux cleaned = -0.00928584 Jy
! Component: 1950  -  total flux cleaned = -0.0102337 Jy
! Component: 2000  -  total flux cleaned = -0.0107011 Jy
! Total flux subtracted in 2048 components = -0.0111648 Jy
! Clean residual min=-0.025658 max=0.026493 Jy/beam
! Clean residual mean=0.000048 rms=0.010089 Jy/beam
! Combined flux in latest and established models = 14.4321 Jy
keep
! Adding 189 model components to the UV plane model.
! The established model now contains 320 components and 14.4321 Jy
![Exited script file: muppet]
wmap "J1924-2914_X_1996_03_13_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9167 x 2.289 at -4.66 degrees (North through East)
! Clean map  min=-0.059809  max=11.211 Jy/beam
! Writing clean map to FITS file: J1924-2914_X_1996_03_13_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 11.2115 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00976253 
device "J1924-2914_X_1996_03_13_yyk\_map.eps/VPS"
! Attempting to open device: 'J1924-2914_X_1996_03_13_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.261229 0.261229 0.522458 1.04492 2.08983 4.17967 8.35933 16.7187 33.4373 66.8747
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0292 
print "peak=",int(peak_flux*1000)/1000
! peak= 11.211 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9167 x 2.289 at -4.66 degrees (North through East)
! Clean map  min=-0.059809  max=11.211 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1924-2914_X_1996_03_13_yyk\_map.gif/gif"
! Attempting to open device: 'J1924-2914_X_1996_03_13_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1924-2914_X_1996_03_13_yyk_uvs.log closed on Mon Jan  8 09:42:48 2007