! Started logfile: J1833-210A_X_1997_07_02_yyk_uvs.log on Mon Jan 8 07:47:37 2007 obs J1833-210A_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1833-210A_X_1997_07_02_yyk_uva.fits ! AN table 1: 151 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.91273 visibilities/baseline/integration-bin. ! Found source: J1833-210A ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 24808 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1833-210A_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.35385 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6839 mas, bmaj=1.765 mas, bpa=-1.353 degrees ! Estimated noise=1430.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.706336 Jy ! Component: 100 - total flux cleaned = 1.0379 Jy ! Total flux subtracted in 100 components = 1.0379 Jy ! Clean residual min=-0.064293 max=0.130368 Jy/beam ! Clean residual mean=0.000888 rms=0.029945 Jy/beam ! Combined flux in latest and established models = 1.0379 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 1.0379 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.926890Jy sigma=0.006723 ! Fit after self-cal, rms=0.922286Jy sigma=0.006691 ! Inverting map and beam ! Estimated beam: bmin=0.6839 mas, bmaj=1.765 mas, bpa=-1.353 degrees ! Estimated noise=1430.43 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.862 mas, bmaj=2.233 mas, bpa=-3.881 degrees ! Estimated noise=692.192 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.358644 Jy ! Component: 100 - total flux cleaned = 0.51376 Jy ! Component: 150 - total flux cleaned = 0.58286 Jy ! Component: 200 - total flux cleaned = 0.6074 Jy ! Total flux subtracted in 200 components = 0.6074 Jy ! Clean residual min=-0.102032 max=0.169991 Jy/beam ! Clean residual mean=0.001396 rms=0.055078 Jy/beam ! Combined flux in latest and established models = 1.6453 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 64 components and 1.6453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.860161Jy sigma=0.006150 ! Fit after self-cal, rms=0.860402Jy sigma=0.006149 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.862 x 2.233 at -3.881 degrees (North through East) ! Clean map min=-0.10204 max=0.73304 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.799092 ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.78 HN 1.51 KP 0.81 ! LA 0.69 MK 1.55 NL 1.81 OV 1.25 ! PT 0.65 SC 1.26 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.836356 ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 1.51 HN 1.30 KP 1.19 ! LA 0.70 MK 1.29 NL 1.60 OV 1.15 ! PT 0.65 SC 1.25 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.916979 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.01 HN 1.14 KP 0.89 ! LA 1.23 MK 1.13 NL 1.26 OV 1.26 ! PT 0.87 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.796066 ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.29 HN 1.43 KP 1.62 ! LA 0.65 MK 1.22 NL 1.61 OV 1.76 ! PT 0.61 SC 1.09 ! ! ! Fit before self-cal, rms=0.860402Jy sigma=0.006149 ! Fit after self-cal, rms=0.831274Jy sigma=0.006662 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.831274Jy sigma=0.006662 ! Fit after self-cal, rms=0.850675Jy sigma=0.006599 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=2.571 mas, bpa=-1.042 degrees ! Estimated noise=492.509 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.377456 Jy ! Component: 100 - total flux cleaned = -0.483169 Jy ! Component: 150 - total flux cleaned = -0.516457 Jy ! Component: 200 - total flux cleaned = -0.524233 Jy ! Total flux subtracted in 200 components = -0.524233 Jy ! Clean residual min=-0.049136 max=0.066309 Jy/beam ! Clean residual mean=0.001336 rms=0.023344 Jy/beam ! Combined flux in latest and established models = 1.12107 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 49 model components to the UV plane model. ! The established model now contains 78 components and 1.12107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.830923Jy sigma=0.005383 ! Fit after self-cal, rms=0.830980Jy sigma=0.005382 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.830980Jy sigma=0.005382 ! Fit after self-cal, rms=0.813106Jy sigma=0.005157 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162466 Jy ! Component: 100 - total flux cleaned = 0.0154341 Jy ! Component: 150 - total flux cleaned = 0.014735 Jy ! Component: 200 - total flux cleaned = 0.0141265 Jy ! Total flux subtracted in 200 components = 0.0141265 Jy ! Clean residual min=-0.048656 max=0.062978 Jy/beam ! Clean residual mean=0.001261 rms=0.021877 Jy/beam ! Combined flux in latest and established models = 1.1352 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 78 components and 1.1352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.809833Jy sigma=0.005153 ! Fit after self-cal, rms=0.806657Jy sigma=0.005115 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.04 x 2.571 at -1.042 degrees (North through East) ! Clean map min=-0.049046 max=0.62629 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.806657Jy sigma=0.005115 ! Fit after self-cal, rms=0.947581Jy sigma=0.004819 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.947581Jy sigma=0.004819 ! Fit after self-cal, rms=0.949155Jy sigma=0.004805 ! Inverting map and beam ! Estimated beam: bmin=1.011 mas, bmaj=2.63 mas, bpa=1.636 degrees ! Estimated noise=481.756 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156046 Jy ! Component: 100 - total flux cleaned = 0.0185646 Jy ! Component: 150 - total flux cleaned = 0.018699 Jy ! Component: 200 - total flux cleaned = 0.0186988 Jy ! Total flux subtracted in 200 components = 0.0186988 Jy ! Clean residual min=-0.036345 max=0.062874 Jy/beam ! Clean residual mean=0.001212 rms=0.017051 Jy/beam ! Combined flux in latest and established models = 1.15389 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 80 components and 1.1539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.947379Jy sigma=0.004802 ! Fit after self-cal, rms=0.947252Jy sigma=0.004797 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.947252Jy sigma=0.004797 ! Fit after self-cal, rms=1.338545Jy sigma=0.004504 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.338545Jy sigma=0.004504 ! Fit after self-cal, rms=1.344408Jy sigma=0.004503 ! Inverting map and beam ! Estimated beam: bmin=0.9951 mas, bmaj=2.608 mas, bpa=2.261 degrees ! Estimated noise=480.732 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221125 Jy ! Component: 100 - total flux cleaned = 0.0284361 Jy ! Component: 150 - total flux cleaned = 0.0287943 Jy ! Component: 200 - total flux cleaned = 0.028908 Jy ! Total flux subtracted in 200 components = 0.028908 Jy ! Clean residual min=-0.035907 max=0.059399 Jy/beam ! Clean residual mean=0.001072 rms=0.016009 Jy/beam ! Combined flux in latest and established models = 1.1828 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 1.1828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.342083Jy sigma=0.004497 ! Fit after self-cal, rms=1.337719Jy sigma=0.004491 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=6.908 mas, bpa=5.615 degrees ! Estimated noise=585.729 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050468 Jy ! Component: 100 - total flux cleaned = 0.00542639 Jy ! Component: 150 - total flux cleaned = 0.0055967 Jy ! Component: 200 - total flux cleaned = 0.00574958 Jy ! Total flux subtracted in 200 components = 0.00574958 Jy ! Clean residual min=-0.050467 max=0.079885 Jy/beam ! Clean residual mean=0.001762 rms=0.024256 Jy/beam ! Combined flux in latest and established models = 1.18855 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 81 components and 1.18855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.337511Jy sigma=0.004491 ! Fit after self-cal, rms=1.339688Jy sigma=0.004493 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.707 mas, bmaj=1.833 mas, bpa=2.204 degrees ! Estimated noise=1292.26 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.634591 Jy ! Component: 100 - total flux cleaned = 0.911483 Jy ! Component: 150 - total flux cleaned = 1.05476 Jy ! Component: 200 - total flux cleaned = 1.1335 Jy ! Total flux subtracted in 200 components = 1.1335 Jy ! Clean residual min=-0.042668 max=0.062410 Jy/beam ! Clean residual mean=0.000671 rms=0.014995 Jy/beam ! Combined flux in latest and established models = 1.1335 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 1.1335 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9951 mas, bmaj=2.608 mas, bpa=2.261 degrees ! Estimated noise=480.732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209524 Jy ! Component: 100 - total flux cleaned = 0.0244652 Jy ! Component: 150 - total flux cleaned = 0.0265362 Jy ! Component: 200 - total flux cleaned = 0.0288877 Jy ! Total flux subtracted in 200 components = 0.0288877 Jy ! Clean residual min=-0.039651 max=0.067026 Jy/beam ! Clean residual mean=0.001096 rms=0.017940 Jy/beam ! Combined flux in latest and established models = 1.16239 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 54 components and 1.16239 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=6.908 mas, bpa=5.615 degrees ! Estimated noise=585.729 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.014013 Jy ! Component: 100 - total flux cleaned = 0.014388 Jy ! Component: 150 - total flux cleaned = 0.0150887 Jy ! Component: 200 - total flux cleaned = 0.0154423 Jy ! Total flux subtracted in 200 components = 0.0154423 Jy ! Clean residual min=-0.052660 max=0.084836 Jy/beam ! Clean residual mean=0.001788 rms=0.025856 Jy/beam ! Combined flux in latest and established models = 1.17783 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 55 components and 1.17783 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9951 mas, bmaj=2.608 mas, bpa=2.261 degrees ! Estimated noise=480.732 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00741844 Jy ! Component: 100 - total flux cleaned = -0.00738469 Jy ! Component: 150 - total flux cleaned = -0.00738384 Jy ! Component: 200 - total flux cleaned = -0.00709462 Jy ! Total flux subtracted in 200 components = -0.00709462 Jy ! Clean residual min=-0.037854 max=0.064514 Jy/beam ! Clean residual mean=0.001087 rms=0.017148 Jy/beam ! Combined flux in latest and established models = 1.17073 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 1.17073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.337737Jy sigma=0.004502 ! Fit after self-cal, rms=1.340919Jy sigma=0.004505 wmodel J1833-210A_X_1997_07_02_yyk\_map.mod ! Writing 62 model components to file: J1833-210A_X_1997_07_02_yyk_map.mod wobs J1833-210A_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1833-210A_X_1997_07_02_yyk_uvs.fits wwins J1833-210A_X_1997_07_02_yyk\_map.win ! wwins: Wrote 1 windows to J1833-210A_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263583 Jy ! Component: 100 - total flux cleaned = 0.046138 Jy ! Component: 150 - total flux cleaned = 0.062955 Jy ! Component: 200 - total flux cleaned = 0.0772971 Jy ! Component: 250 - total flux cleaned = 0.0882143 Jy ! Component: 300 - total flux cleaned = 0.0994722 Jy ! Component: 350 - total flux cleaned = 0.109639 Jy ! Component: 400 - total flux cleaned = 0.119731 Jy ! Component: 450 - total flux cleaned = 0.128946 Jy ! Component: 500 - total flux cleaned = 0.136555 Jy ! Component: 550 - total flux cleaned = 0.144702 Jy ! Component: 600 - total flux cleaned = 0.152172 Jy ! Component: 650 - total flux cleaned = 0.159429 Jy ! Component: 700 - total flux cleaned = 0.166491 Jy ! Component: 750 - total flux cleaned = 0.174102 Jy ! Component: 800 - total flux cleaned = 0.180817 Jy ! Component: 850 - total flux cleaned = 0.188056 Jy ! Component: 900 - total flux cleaned = 0.195119 Jy ! Component: 950 - total flux cleaned = 0.202014 Jy ! Component: 1000 - total flux cleaned = 0.208432 Jy ! Component: 1050 - total flux cleaned = 0.214084 Jy ! Component: 1100 - total flux cleaned = 0.219307 Jy ! Component: 1150 - total flux cleaned = 0.224124 Jy ! Component: 1200 - total flux cleaned = 0.228846 Jy ! Component: 1250 - total flux cleaned = 0.233193 Jy ! Component: 1300 - total flux cleaned = 0.237744 Jy ! Component: 1350 - total flux cleaned = 0.241939 Jy ! Component: 1400 - total flux cleaned = 0.246338 Jy ! Component: 1450 - total flux cleaned = 0.250397 Jy ! Component: 1500 - total flux cleaned = 0.253597 Jy ! Component: 1550 - total flux cleaned = 0.257273 Jy ! Component: 1600 - total flux cleaned = 0.260379 Jy ! Component: 1650 - total flux cleaned = 0.264456 Jy ! Component: 1700 - total flux cleaned = 0.267469 Jy ! Component: 1750 - total flux cleaned = 0.271178 Jy ! Component: 1800 - total flux cleaned = 0.274588 Jy ! Component: 1850 - total flux cleaned = 0.27675 Jy ! Component: 1900 - total flux cleaned = 0.280071 Jy ! Component: 1950 - total flux cleaned = 0.283108 Jy ! Component: 2000 - total flux cleaned = 0.285644 Jy ! Total flux subtracted in 2048 components = 0.28747 Jy ! Clean residual min=-0.012386 max=0.011663 Jy/beam ! Clean residual mean=0.000290 rms=0.005047 Jy/beam ! Combined flux in latest and established models = 1.45821 Jy keep ! Adding 194 model components to the UV plane model. ! The established model now contains 256 components and 1.45821 Jy ![Exited script file: muppet] wmap "J1833-210A_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9951 x 2.608 at 2.261 degrees (North through East) ! Clean map min=-0.020607 max=0.67814 Jy/beam ! Writing clean map to FITS file: J1833-210A_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.678136 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00522585 device "J1833-210A_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1833-210A_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.31186 2.31186 4.62371 9.24743 18.4949 36.9897 73.9794 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0156 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.678 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9951 x 2.608 at 2.261 degrees (North through East) ! Clean map min=-0.020607 max=0.67814 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1833-210A_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1833-210A_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1833-210A_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 07:47:47 2007