! Started logfile: J1833-210A_S_1997_07_02_yyk_uvs.log on Sun Jan 7 19:32:21 2007 obs J1833-210A_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1833-210A_S_1997_07_02_yyk_uva.fits ! AN table 1: 151 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.986608 visibilities/baseline/integration-bin. ! Found source: J1833-210A ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 755 lines of history. ! ! Reading 26816 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1833-210A_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.930009 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.585 mas, bmaj=6.773 mas, bpa=-2.517 degrees ! Estimated noise=2271.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.322854 Jy ! Component: 100 - total flux cleaned = 0.540805 Jy ! Total flux subtracted in 100 components = 0.540805 Jy ! Clean residual min=-0.058230 max=0.092784 Jy/beam ! Clean residual mean=0.006195 rms=0.030464 Jy/beam ! Combined flux in latest and established models = 0.540804 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 73 model components to the UV plane model. ! The established model now contains 73 components and 0.540804 Jy ! ! Correcting IF 1. ! A total of 222 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.779209Jy sigma=0.003249 ! Fit after self-cal, rms=0.778764Jy sigma=0.003246 ! Inverting map and beam ! Estimated beam: bmin=2.585 mas, bmaj=6.773 mas, bpa=-2.517 degrees ! Estimated noise=2271.53 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.424 mas, bmaj=9.024 mas, bpa=-4.338 degrees ! Estimated noise=1129.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.348439 Jy ! Component: 100 - total flux cleaned = 0.602409 Jy ! Component: 150 - total flux cleaned = 0.81031 Jy ! Component: 200 - total flux cleaned = 0.985874 Jy ! Total flux subtracted in 200 components = 0.985874 Jy ! Clean residual min=-0.065373 max=0.081246 Jy/beam ! Clean residual mean=0.015428 rms=0.042502 Jy/beam ! Combined flux in latest and established models = 1.52668 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 194 model components to the UV plane model. ! The established model now contains 252 components and 1.52668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.634523Jy sigma=0.002551 ! Fit after self-cal, rms=0.633685Jy sigma=0.002547 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.424 x 9.024 at -4.338 degrees (North through East) ! Clean map min=-0.06616 max=0.34203 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.94429 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.69 HN 1.22 KP 0.79 ! LA 0.83 MK 1.30 NL 1.00* OV 1.21 ! PT 0.57 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.839159 ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.60 HN 3.04 KP 0.82 ! LA 0.87 MK 0.69 NL 0.83 OV 1.22 ! PT 0.58 SC 1.03 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.824944 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.11 HN 3.14 KP 1.63 ! LA 0.48 MK 1.11 NL 1.00 OV 0.79 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.951419 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.24 HN 1.07 KP 1.53 ! LA 0.52 MK 1.11 NL 0.90 OV 0.99 ! PT 0.92 SC 1.24 ! ! ! Fit before self-cal, rms=0.633685Jy sigma=0.002547 ! Fit after self-cal, rms=0.579035Jy sigma=0.002297 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.579035Jy sigma=0.002297 ! Fit after self-cal, rms=0.580213Jy sigma=0.002281 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.61 mas, bmaj=9.417 mas, bpa=-6.49 degrees ! Estimated noise=749.045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.147759 Jy ! Component: 100 - total flux cleaned = -0.189187 Jy ! Component: 150 - total flux cleaned = -0.169661 Jy ! Component: 200 - total flux cleaned = -0.147014 Jy ! Total flux subtracted in 200 components = -0.147014 Jy ! Clean residual min=-0.018617 max=0.018761 Jy/beam ! Clean residual mean=0.001626 rms=0.009864 Jy/beam ! Combined flux in latest and established models = 1.37966 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 165 model components to the UV plane model. ! The established model now contains 398 components and 1.37966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568659Jy sigma=0.002013 ! Fit after self-cal, rms=0.568222Jy sigma=0.002011 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568222Jy sigma=0.002011 ! Fit after self-cal, rms=0.564571Jy sigma=0.001972 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0290925 Jy ! Component: 100 - total flux cleaned = 0.0554211 Jy ! Component: 150 - total flux cleaned = 0.0765078 Jy ! Component: 200 - total flux cleaned = 0.0967654 Jy ! Total flux subtracted in 200 components = 0.0967654 Jy ! Clean residual min=-0.012600 max=0.012766 Jy/beam ! Clean residual mean=0.001552 rms=0.006601 Jy/beam ! Combined flux in latest and established models = 1.47643 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 131 model components to the UV plane model. ! The established model now contains 521 components and 1.47643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561120Jy sigma=0.001934 ! Fit after self-cal, rms=0.559300Jy sigma=0.001926 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.61 x 9.417 at -6.49 degrees (North through East) ! Clean map min=-0.029637 max=0.21512 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.559300Jy sigma=0.001926 ! Fit after self-cal, rms=1.302873Jy sigma=0.001679 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.302873Jy sigma=0.001679 ! Fit after self-cal, rms=1.303175Jy sigma=0.001678 ! Inverting map and beam ! Estimated beam: bmin=3.684 mas, bmaj=8.967 mas, bpa=-3.159 degrees ! Estimated noise=720.543 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316936 Jy ! Component: 100 - total flux cleaned = 0.00282749 Jy ! Component: 150 - total flux cleaned = 0.00952676 Jy ! Component: 200 - total flux cleaned = 0.0150764 Jy ! Total flux subtracted in 200 components = 0.0150764 Jy ! Clean residual min=-0.006017 max=0.006049 Jy/beam ! Clean residual mean=0.000225 rms=0.002957 Jy/beam ! Combined flux in latest and established models = 1.49151 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 102 model components to the UV plane model. ! The established model now contains 622 components and 1.49151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.302363Jy sigma=0.001665 ! Fit after self-cal, rms=1.301907Jy sigma=0.001665 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.301907Jy sigma=0.001665 ! Fit after self-cal, rms=2.612361Jy sigma=0.001647 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.612361Jy sigma=0.001647 ! Fit after self-cal, rms=2.612526Jy sigma=0.001647 ! Inverting map and beam ! Estimated beam: bmin=3.572 mas, bmaj=8.802 mas, bpa=-2.143 degrees ! Estimated noise=698.294 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417152 Jy ! Component: 100 - total flux cleaned = 0.00792229 Jy ! Component: 150 - total flux cleaned = 0.0117933 Jy ! Component: 200 - total flux cleaned = 0.0137859 Jy ! Total flux subtracted in 200 components = 0.0137859 Jy ! Clean residual min=-0.004826 max=0.004842 Jy/beam ! Clean residual mean=0.000194 rms=0.002457 Jy/beam ! Combined flux in latest and established models = 1.50529 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 110 model components to the UV plane model. ! The established model now contains 709 components and 1.50529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.612279Jy sigma=0.001640 ! Fit after self-cal, rms=2.612214Jy sigma=0.001639 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.313 mas, bmaj=21.52 mas, bpa=5.959 degrees ! Estimated noise=846.993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00641447 Jy ! Component: 100 - total flux cleaned = 0.00978936 Jy ! Component: 150 - total flux cleaned = 0.0118738 Jy ! Component: 200 - total flux cleaned = 0.0128573 Jy ! Total flux subtracted in 200 components = 0.0128573 Jy ! Clean residual min=-0.005873 max=0.005886 Jy/beam ! Clean residual mean=0.000261 rms=0.003116 Jy/beam ! Combined flux in latest and established models = 1.51815 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 90 model components to the UV plane model. ! The established model now contains 788 components and 1.51815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.611852Jy sigma=0.001634 ! Fit after self-cal, rms=2.611375Jy sigma=0.001633 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.577 mas, bmaj=6.611 mas, bpa=-2.123 degrees ! Estimated noise=1648.58 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.230071 Jy ! Component: 100 - total flux cleaned = 0.380922 Jy ! Component: 150 - total flux cleaned = 0.494214 Jy ! Component: 200 - total flux cleaned = 0.585291 Jy ! Total flux subtracted in 200 components = 0.585291 Jy ! Clean residual min=-0.030890 max=0.041145 Jy/beam ! Clean residual mean=0.002944 rms=0.015834 Jy/beam ! Combined flux in latest and established models = 0.585291 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 126 model components to the UV plane model. ! The established model now contains 126 components and 0.585291 Jy ! Inverting map and beam ! Estimated beam: bmin=3.572 mas, bmaj=8.802 mas, bpa=-2.143 degrees ! Estimated noise=698.294 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.198416 Jy ! Component: 100 - total flux cleaned = 0.334369 Jy ! Component: 150 - total flux cleaned = 0.430597 Jy ! Component: 200 - total flux cleaned = 0.500566 Jy ! Total flux subtracted in 200 components = 0.500566 Jy ! Clean residual min=-0.029761 max=0.030333 Jy/beam ! Clean residual mean=0.005805 rms=0.015477 Jy/beam ! Combined flux in latest and established models = 1.08586 Jy ! Adding 183 model components to the UV plane model. ! The established model now contains 294 components and 1.08586 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.313 mas, bmaj=21.52 mas, bpa=5.959 degrees ! Estimated noise=846.993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.05269 Jy ! Component: 100 - total flux cleaned = 0.0765423 Jy ! Component: 150 - total flux cleaned = 0.102756 Jy ! Component: 200 - total flux cleaned = 0.127586 Jy ! Total flux subtracted in 200 components = 0.127586 Jy ! Clean residual min=-0.017857 max=0.017864 Jy/beam ! Clean residual mean=0.003869 rms=0.009551 Jy/beam ! Combined flux in latest and established models = 1.21344 Jy ! Adding 144 model components to the UV plane model. ! The established model now contains 428 components and 1.21344 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.572 mas, bmaj=8.802 mas, bpa=-2.143 degrees ! Estimated noise=698.294 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153055 Jy ! Component: 100 - total flux cleaned = 0.0304673 Jy ! Component: 150 - total flux cleaned = 0.0434044 Jy ! Component: 200 - total flux cleaned = 0.0559361 Jy ! Total flux subtracted in 200 components = 0.0559361 Jy ! Clean residual min=-0.008303 max=0.008380 Jy/beam ! Clean residual mean=0.001447 rms=0.004307 Jy/beam ! Combined flux in latest and established models = 1.26938 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 90 model components to the UV plane model. ! The established model now contains 516 components and 1.26938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.612342Jy sigma=0.001663 ! Fit after self-cal, rms=2.612216Jy sigma=0.001660 wmodel J1833-210A_S_1997_07_02_yyk\_map.mod ! Writing 516 model components to file: J1833-210A_S_1997_07_02_yyk_map.mod wobs J1833-210A_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1833-210A_S_1997_07_02_yyk_uvs.fits wwins J1833-210A_S_1997_07_02_yyk\_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1833-210A_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.572 x 8.802 at -2.143 degrees (North through East) ! Clean map min=-0.020271 max=0.2006 Jy/beam ! Writing clean map to FITS file: J1833-210A_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.200604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00424443 device "J1833-210A_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1833-210A_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.34748 6.34748 12.695 25.3899 50.7798 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0127 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.2 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.572 x 8.802 at -2.143 degrees (North through East) ! Clean map min=-0.020271 max=0.2006 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1833-210A_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1833-210A_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1833-210A_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 19:32:33 2007