! Started logfile: J1733-1304_S_1997_05_07_yyk_uvs.log on Sun Jan  7 19:15:11 2007
obs J1733-1304_S_1997_05_07_yyk_uva.fits
! Reading UV FITS file: J1733-1304_S_1997_05_07_yyk_uva.fits
! AN table 1: 134 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.8801 visibilities/baseline/integration-bin.
! Found source: J1733-1304
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22447e+09        8e+06          1        8e+06
!  02        2  2.23447e+09        8e+06          1        8e+06
!  03        3  2.29447e+09        8e+06          1        8e+06
!  04        4  2.32447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 614 lines of history.
! 
! Reading 21228 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1733-1304_S_1997_05_07_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 4.40855 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.853 mas, bmaj=7.008 mas, bpa=-3.397 degrees
! Estimated noise=1685.29 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 3.52531 Jy
! Component: 100  -  total flux cleaned = 4.37629 Jy
! Total flux subtracted in 100 components = 4.37629 Jy
! Clean residual min=-0.163810 max=0.338140 Jy/beam
! Clean residual mean=0.007662 rms=0.057429 Jy/beam
! Combined flux in latest and established models = 4.37629 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 4.37629 Jy
! 
! Correcting IF 1.
!  A total of 221 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.044714Jy  sigma=0.004582
! Fit after  self-cal, rms=1.041805Jy  sigma=0.004565
! Inverting map and beam 
! Estimated beam: bmin=2.853 mas, bmaj=7.008 mas, bpa=-3.397 degrees
! Estimated noise=1685.33 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.542 mas, bmaj=8.668 mas, bpa=-5.248 degrees
! Estimated noise=1105.78 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.436511 Jy
! Component: 100  -  total flux cleaned = 0.620496 Jy
! Component: 150  -  total flux cleaned = 0.710829 Jy
! Component: 200  -  total flux cleaned = 0.747599 Jy
! Total flux subtracted in 200 components = 0.747599 Jy
! Clean residual min=-0.169514 max=0.435612 Jy/beam
! Clean residual mean=0.009921 rms=0.075547 Jy/beam
! Combined flux in latest and established models = 5.12389 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 43 components and 5.12389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.890611Jy  sigma=0.003973
! Fit after  self-cal, rms=0.889703Jy  sigma=0.003964
! Inverting map 
! Added new window around map position (-1.5, 20.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.494596 Jy
! Component: 100  -  total flux cleaned = 0.687947 Jy
! Component: 150  -  total flux cleaned = 0.792221 Jy
! Component: 200  -  total flux cleaned = 0.835561 Jy
! Total flux subtracted in 200 components = 0.835561 Jy
! Clean residual min=-0.131499 max=0.189607 Jy/beam
! Clean residual mean=0.005650 rms=0.043145 Jy/beam
! Combined flux in latest and established models = 5.95945 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 72 model components to the UV plane model.
! The established model now contains 113 components and 5.95946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.713024Jy  sigma=0.003034
! Fit after  self-cal, rms=0.675397Jy  sigma=0.002850
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.542 x 8.668 at -5.248 degrees (North through East)
! Clean map  min=-0.092391  max=3.9133 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01302
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        0.95     KP        0.90     
!   LA        1.00     MK        1.02     NL        1.00*    OV        1.11     
!   PT        0.94     SC        0.87     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.968751
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.13     HN        1.06     KP        0.99     
!   LA        1.10     MK        1.07     NL        0.99     OV        1.05     
!   PT        0.93     SC        0.94     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.04829
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        0.92     KP        0.91     
!   LA        0.81     MK        0.86     NL        0.95     OV        0.96     
!   PT        1.06     SC        1.05     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.996787
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.12     HN        1.03     KP        0.94     
!   LA        0.90     MK        1.00     NL        1.04     OV        1.10     
!   PT        0.90     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.675397Jy  sigma=0.002850
! Fit after  self-cal, rms=0.510439Jy  sigma=0.002158
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.510439Jy  sigma=0.002158
! Fit after  self-cal, rms=0.510397Jy  sigma=0.002158
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.507 mas, bmaj=8.596 mas, bpa=-5.054 degrees
! Estimated noise=1112.1 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.138245 Jy
! Component: 100  -  total flux cleaned = 0.149019 Jy
! Component: 150  -  total flux cleaned = 0.152528 Jy
! Component: 200  -  total flux cleaned = 0.153985 Jy
! Total flux subtracted in 200 components = 0.153985 Jy
! Clean residual min=-0.043895 max=0.069276 Jy/beam
! Clean residual mean=0.001852 rms=0.014240 Jy/beam
! Combined flux in latest and established models = 6.11344 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 138 components and 6.11344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.482399Jy  sigma=0.002024
! Fit after  self-cal, rms=0.476343Jy  sigma=0.001997
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.476343Jy  sigma=0.001997
! Fit after  self-cal, rms=0.446933Jy  sigma=0.001897
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0446731 Jy
! Component: 100  -  total flux cleaned = 0.0475657 Jy
! Component: 150  -  total flux cleaned = 0.0475084 Jy
! Component: 200  -  total flux cleaned = 0.0475091 Jy
! Total flux subtracted in 200 components = 0.0475091 Jy
! Clean residual min=-0.037802 max=0.053690 Jy/beam
! Clean residual mean=0.001536 rms=0.011611 Jy/beam
! Combined flux in latest and established models = 6.16095 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 153 components and 6.16095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.437994Jy  sigma=0.001858
! Fit after  self-cal, rms=0.430542Jy  sigma=0.001834
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.507 x 8.596 at -5.054 degrees (North through East)
! Clean map  min=-0.037009  max=3.9341 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.430542Jy  sigma=0.001834
! Fit after  self-cal, rms=0.334360Jy  sigma=0.001397
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.334360Jy  sigma=0.001397
! Fit after  self-cal, rms=0.332125Jy  sigma=0.001391
! Inverting map and beam 
! Estimated beam: bmin=3.495 mas, bmaj=8.588 mas, bpa=-5.223 degrees
! Estimated noise=1106.83 mJy/beam.
! Added new window around map position (-2.5, 39.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0540772 Jy
! Component: 100  -  total flux cleaned = 0.0689574 Jy
! Component: 150  -  total flux cleaned = 0.078284 Jy
! Component: 200  -  total flux cleaned = 0.0823106 Jy
! Total flux subtracted in 200 components = 0.0823106 Jy
! Clean residual min=-0.026786 max=0.029481 Jy/beam
! Clean residual mean=0.000543 rms=0.007703 Jy/beam
! Combined flux in latest and established models = 6.24326 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 175 components and 6.24326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.321888Jy  sigma=0.001345
! Fit after  self-cal, rms=0.320570Jy  sigma=0.001340
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.320570Jy  sigma=0.001340
! Fit after  self-cal, rms=0.319852Jy  sigma=0.001337
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.319852Jy  sigma=0.001337
! Fit after  self-cal, rms=0.319441Jy  sigma=0.001335
! Inverting map and beam 
! Estimated beam: bmin=3.496 mas, bmaj=8.581 mas, bpa=-5.205 degrees
! Estimated noise=1106.16 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0044632 Jy
! Component: 100  -  total flux cleaned = 0.00540843 Jy
! Component: 150  -  total flux cleaned = 0.00627578 Jy
! Component: 200  -  total flux cleaned = 0.00709891 Jy
! Total flux subtracted in 200 components = 0.00709891 Jy
! Clean residual min=-0.024164 max=0.025380 Jy/beam
! Clean residual mean=0.000406 rms=0.006779 Jy/beam
! Combined flux in latest and established models = 6.25036 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 185 components and 6.25036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.314689Jy  sigma=0.001318
! Fit after  self-cal, rms=0.314245Jy  sigma=0.001316
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.509 mas, bmaj=15.3 mas, bpa=1.868 degrees
! Estimated noise=1375.39 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00845743 Jy
! Component: 100  -  total flux cleaned = 0.0116915 Jy
! Component: 150  -  total flux cleaned = 0.0133399 Jy
! Component: 200  -  total flux cleaned = 0.0143365 Jy
! Total flux subtracted in 200 components = 0.0143365 Jy
! Clean residual min=-0.018245 max=0.024285 Jy/beam
! Clean residual mean=0.000552 rms=0.006870 Jy/beam
! Combined flux in latest and established models = 6.26469 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 201 components and 6.2647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.312572Jy  sigma=0.001309
! Fit after  self-cal, rms=0.312131Jy  sigma=0.001307
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.828 mas, bmaj=6.968 mas, bpa=-3.366 degrees
! Estimated noise=1672.78 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 3.51391 Jy
! Component: 100  -  total flux cleaned = 4.39905 Jy
! Component: 150  -  total flux cleaned = 4.83439 Jy
! Component: 200  -  total flux cleaned = 5.13162 Jy
! Total flux subtracted in 200 components = 5.13162 Jy
! Clean residual min=-0.058363 max=0.125580 Jy/beam
! Clean residual mean=0.003787 rms=0.028225 Jy/beam
! Combined flux in latest and established models = 5.13162 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 67 model components to the UV plane model.
! The established model now contains 67 components and 5.13162 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.496 mas, bmaj=8.581 mas, bpa=-5.205 degrees
! Estimated noise=1106.16 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.369807 Jy
! Component: 100  -  total flux cleaned = 0.590075 Jy
! Component: 150  -  total flux cleaned = 0.731779 Jy
! Component: 200  -  total flux cleaned = 0.828719 Jy
! Total flux subtracted in 200 components = 0.828719 Jy
! Clean residual min=-0.035668 max=0.047424 Jy/beam
! Clean residual mean=0.002178 rms=0.014033 Jy/beam
! Combined flux in latest and established models = 5.96034 Jy
! Adding 96 model components to the UV plane model.
! The established model now contains 148 components and 5.96034 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.509 mas, bmaj=15.3 mas, bpa=1.868 degrees
! Estimated noise=1375.39 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.10228 Jy
! Component: 100  -  total flux cleaned = 0.162614 Jy
! Component: 150  -  total flux cleaned = 0.201659 Jy
! Component: 200  -  total flux cleaned = 0.228213 Jy
! Total flux subtracted in 200 components = 0.228213 Jy
! Clean residual min=-0.018120 max=0.022777 Jy/beam
! Clean residual mean=0.001378 rms=0.007676 Jy/beam
! Combined flux in latest and established models = 6.18855 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 231 components and 6.18855 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.496 mas, bmaj=8.581 mas, bpa=-5.205 degrees
! Estimated noise=1106.16 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0244939 Jy
! Component: 100  -  total flux cleaned = 0.0296476 Jy
! Component: 150  -  total flux cleaned = 0.0315534 Jy
! Component: 200  -  total flux cleaned = 0.0332528 Jy
! Total flux subtracted in 200 components = 0.0332529 Jy
! Clean residual min=-0.022400 max=0.023859 Jy/beam
! Clean residual mean=0.000571 rms=0.005938 Jy/beam
! Combined flux in latest and established models = 6.2218 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 247 components and 6.2218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.305031Jy  sigma=0.001288
! Fit after  self-cal, rms=0.303333Jy  sigma=0.001282
wmodel J1733-1304_S_1997_05_07_yyk\_map.mod
! Writing 247 model components to file: J1733-1304_S_1997_05_07_yyk_map.mod
wobs J1733-1304_S_1997_05_07_yyk\_uvs.fits
! Writing UV FITS file: J1733-1304_S_1997_05_07_yyk_uvs.fits
wwins J1733-1304_S_1997_05_07_yyk\_map.win
! wwins: Wrote 3 windows to J1733-1304_S_1997_05_07_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00692882 Jy
! Component: 100  -  total flux cleaned = 0.0116913 Jy
! Component: 150  -  total flux cleaned = 0.0156726 Jy
! Component: 200  -  total flux cleaned = 0.0188102 Jy
! Component: 250  -  total flux cleaned = 0.0212135 Jy
! Component: 300  -  total flux cleaned = 0.0235123 Jy
! Component: 350  -  total flux cleaned = 0.0251571 Jy
! Component: 400  -  total flux cleaned = 0.0262196 Jy
! Component: 450  -  total flux cleaned = 0.0280162 Jy
! Component: 500  -  total flux cleaned = 0.0292527 Jy
! Component: 550  -  total flux cleaned = 0.0302053 Jy
! Component: 600  -  total flux cleaned = 0.0311333 Jy
! Component: 650  -  total flux cleaned = 0.0320297 Jy
! Component: 700  -  total flux cleaned = 0.0331148 Jy
! Component: 750  -  total flux cleaned = 0.0341702 Jy
! Component: 800  -  total flux cleaned = 0.0353933 Jy
! Component: 850  -  total flux cleaned = 0.0367833 Jy
! Component: 900  -  total flux cleaned = 0.0379509 Jy
! Component: 950  -  total flux cleaned = 0.0400326 Jy
! Component: 1000  -  total flux cleaned = 0.0416934 Jy
! Component: 1050  -  total flux cleaned = 0.0427767 Jy
! Component: 1100  -  total flux cleaned = 0.0440144 Jy
! Component: 1150  -  total flux cleaned = 0.0454 Jy
! Component: 1200  -  total flux cleaned = 0.0462472 Jy
! Component: 1250  -  total flux cleaned = 0.0477365 Jy
! Component: 1300  -  total flux cleaned = 0.0485425 Jy
! Component: 1350  -  total flux cleaned = 0.0493343 Jy
! Component: 1400  -  total flux cleaned = 0.0501122 Jy
! Component: 1450  -  total flux cleaned = 0.0508715 Jy
! Component: 1500  -  total flux cleaned = 0.0511697 Jy
! Component: 1550  -  total flux cleaned = 0.0521941 Jy
! Component: 1600  -  total flux cleaned = 0.0529052 Jy
! Component: 1650  -  total flux cleaned = 0.0530442 Jy
! Component: 1700  -  total flux cleaned = 0.0537326 Jy
! Component: 1750  -  total flux cleaned = 0.053734 Jy
! Component: 1800  -  total flux cleaned = 0.0542698 Jy
! Component: 1850  -  total flux cleaned = 0.0545309 Jy
! Component: 1900  -  total flux cleaned = 0.0546607 Jy
! Component: 1950  -  total flux cleaned = 0.0550367 Jy
! Component: 2000  -  total flux cleaned = 0.0555281 Jy
! Total flux subtracted in 2048 components = 0.055527 Jy
! Clean residual min=-0.006573 max=0.006030 Jy/beam
! Clean residual mean=0.000130 rms=0.002428 Jy/beam
! Combined flux in latest and established models = 6.27733 Jy
keep
! Adding 111 model components to the UV plane model.
! The established model now contains 358 components and 6.27733 Jy
![Exited script file: muppet]
wmap "J1733-1304_S_1997_05_07_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.496 x 8.581 at -5.205 degrees (North through East)
! Clean map  min=-0.014052  max=3.9781 Jy/beam
! Writing clean map to FITS file: J1733-1304_S_1997_05_07_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 3.97805 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00241259 
device "J1733-1304_S_1997_05_07_yyk\_map.eps/VPS"
! Attempting to open device: 'J1733-1304_S_1997_05_07_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.181943 0.181943 0.363885 0.72777 1.45554 2.91108 5.82216 11.6443 23.2886 46.5773 93.1546
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0072 
print "peak=",int(peak_flux*1000)/1000
! peak= 3.978 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.496 x 8.581 at -5.205 degrees (North through East)
! Clean map  min=-0.014052  max=3.9781 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1733-1304_S_1997_05_07_yyk\_map.gif/gif"
! Attempting to open device: 'J1733-1304_S_1997_05_07_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1733-1304_S_1997_05_07_yyk_uvs.log closed on Sun Jan  7 19:15:20 2007