! Started logfile: J1728-0350_X_1997_05_07_yyk_uvs.log on Mon Jan 8 07:23:26 2007 obs J1728-0350_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1728-0350_X_1997_05_07_yyk_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.785134 visibilities/baseline/integration-bin. ! Found source: J1728-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 20492 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1728-0350_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.28192 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7342 mas, bmaj=1.801 mas, bpa=2.504 degrees ! Estimated noise=1345.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.180295 Jy ! Component: 100 - total flux cleaned = 0.220044 Jy ! Total flux subtracted in 100 components = 0.220044 Jy ! Clean residual min=-0.008527 max=0.011861 Jy/beam ! Clean residual mean=-0.000012 rms=0.002233 Jy/beam ! Combined flux in latest and established models = 0.220044 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.220044 Jy ! ! Correcting IF 1. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.175326Jy sigma=0.001242 ! Fit after self-cal, rms=0.175208Jy sigma=0.001241 ! Inverting map and beam ! Estimated beam: bmin=0.7342 mas, bmaj=1.801 mas, bpa=2.504 degrees ! Estimated noise=1345.98 mJy/beam. ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161585 Jy ! Component: 100 - total flux cleaned = 0.0236341 Jy ! Total flux subtracted in 100 components = 0.0236341 Jy ! Clean residual min=-0.006498 max=0.007308 Jy/beam ! Clean residual mean=-0.000009 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 0.243678 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 23 components and 0.243678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173853Jy sigma=0.001230 ! Fit after self-cal, rms=0.173839Jy sigma=0.001229 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9382 mas, bmaj=2.194 mas, bpa=-1.138 degrees ! Estimated noise=682.691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669172 Jy ! Component: 100 - total flux cleaned = 0.00929767 Jy ! Component: 150 - total flux cleaned = 0.0105277 Jy ! Component: 200 - total flux cleaned = 0.0108171 Jy ! Total flux subtracted in 200 components = 0.0108171 Jy ! Clean residual min=-0.004938 max=0.007189 Jy/beam ! Clean residual mean=-0.000008 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.254495 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 50 components and 0.254495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173708Jy sigma=0.001228 ! Fit after self-cal, rms=0.173705Jy sigma=0.001228 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9382 x 2.194 at -1.138 degrees (North through East) ! Clean map min=-0.0047877 max=0.21731 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.995123 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.00* KP 1.03 ! LA 0.99 MK 1.02 NL 1.09 OV 1.00 ! PT 0.97 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01065 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.00* KP 1.01 ! LA 1.00 MK 0.95 NL 1.03 OV 1.05 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.993799 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.00* KP 1.01 ! LA 0.99 MK 0.99 NL 1.01 OV 1.02 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.993516 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.00* KP 0.99 ! LA 0.99 MK 1.00 NL 1.04 OV 1.01 ! PT 0.99 SC 1.01 ! ! ! Fit before self-cal, rms=0.173705Jy sigma=0.001228 ! Fit after self-cal, rms=0.173766Jy sigma=0.001226 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173766Jy sigma=0.001226 ! Fit after self-cal, rms=0.173767Jy sigma=0.001226 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9377 mas, bmaj=2.201 mas, bpa=-1.373 degrees ! Estimated noise=679.928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.6, -3.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00877374 Jy ! Component: 100 - total flux cleaned = 0.0117927 Jy ! Component: 150 - total flux cleaned = 0.0122606 Jy ! Component: 200 - total flux cleaned = 0.0123881 Jy ! Total flux subtracted in 200 components = 0.0123881 Jy ! Clean residual min=-0.003717 max=0.003683 Jy/beam ! Clean residual mean=-0.000002 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.266883 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 78 components and 0.266883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173490Jy sigma=0.001224 ! Fit after self-cal, rms=0.173482Jy sigma=0.001224 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173482Jy sigma=0.001224 ! Fit after self-cal, rms=0.170132Jy sigma=0.001202 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, -1.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354041 Jy ! Component: 100 - total flux cleaned = 0.00355435 Jy ! Component: 150 - total flux cleaned = 0.00365095 Jy ! Component: 200 - total flux cleaned = 0.00372281 Jy ! Total flux subtracted in 200 components = 0.00372281 Jy ! Clean residual min=-0.003599 max=0.002947 Jy/beam ! Clean residual mean=-0.000001 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.270606 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.270606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169998Jy sigma=0.001201 ! Fit after self-cal, rms=0.169630Jy sigma=0.001199 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9377 x 2.201 at -1.373 degrees (North through East) ! Clean map min=-0.0032005 max=0.22034 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169630Jy sigma=0.001199 ! Fit after self-cal, rms=0.168396Jy sigma=0.001198 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168396Jy sigma=0.001198 ! Fit after self-cal, rms=0.168324Jy sigma=0.001197 ! Inverting map and beam ! Estimated beam: bmin=0.9263 mas, bmaj=2.186 mas, bpa=-0.7829 degrees ! Estimated noise=674.967 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186818 Jy ! Component: 100 - total flux cleaned = 0.00192664 Jy ! Component: 150 - total flux cleaned = 0.00182963 Jy ! Component: 200 - total flux cleaned = 0.00178572 Jy ! Total flux subtracted in 200 components = 0.00178572 Jy ! Clean residual min=-0.003075 max=0.002471 Jy/beam ! Clean residual mean=0.000002 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.272391 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 109 components and 0.272391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168289Jy sigma=0.001197 ! Fit after self-cal, rms=0.168264Jy sigma=0.001197 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168264Jy sigma=0.001197 ! Fit after self-cal, rms=0.168189Jy sigma=0.001195 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168189Jy sigma=0.001195 ! Fit after self-cal, rms=0.168184Jy sigma=0.001195 ! Inverting map and beam ! Estimated beam: bmin=0.9247 mas, bmaj=2.184 mas, bpa=-0.5946 degrees ! Estimated noise=674.577 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000800477 Jy ! Component: 100 - total flux cleaned = 0.000543032 Jy ! Component: 150 - total flux cleaned = 0.000468756 Jy ! Component: 200 - total flux cleaned = 0.000401711 Jy ! Total flux subtracted in 200 components = 0.000401711 Jy ! Clean residual min=-0.002908 max=0.002476 Jy/beam ! Clean residual mean=0.000001 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.272793 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 126 components and 0.272793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168168Jy sigma=0.001195 ! Fit after self-cal, rms=0.168167Jy sigma=0.001195 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.54 mas, bmaj=3.955 mas, bpa=4.015 degrees ! Estimated noise=854.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693024 Jy ! Component: 100 - total flux cleaned = 0.000588974 Jy ! Component: 150 - total flux cleaned = 0.000472017 Jy ! Component: 200 - total flux cleaned = 0.000498054 Jy ! Total flux subtracted in 200 components = 0.000498054 Jy ! Clean residual min=-0.003180 max=0.002575 Jy/beam ! Clean residual mean=0.000000 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.273291 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 141 components and 0.273291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168167Jy sigma=0.001195 ! Fit after self-cal, rms=0.168167Jy sigma=0.001195 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.728 mas, bmaj=1.803 mas, bpa=2.716 degrees ! Estimated noise=1330.85 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.182806 Jy ! Component: 100 - total flux cleaned = 0.222398 Jy ! Component: 150 - total flux cleaned = 0.238824 Jy ! Component: 200 - total flux cleaned = 0.248515 Jy ! Total flux subtracted in 200 components = 0.248515 Jy ! Clean residual min=-0.005430 max=0.005234 Jy/beam ! Clean residual mean=-0.000004 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.248515 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.248515 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9247 mas, bmaj=2.184 mas, bpa=-0.5946 degrees ! Estimated noise=674.577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00952415 Jy ! Component: 100 - total flux cleaned = 0.0151199 Jy ! Component: 150 - total flux cleaned = 0.0188111 Jy ! Component: 200 - total flux cleaned = 0.0213597 Jy ! Total flux subtracted in 200 components = 0.0213597 Jy ! Clean residual min=-0.003419 max=0.002612 Jy/beam ! Clean residual mean=-0.000000 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.269875 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 57 components and 0.269875 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.54 mas, bmaj=3.955 mas, bpa=4.015 degrees ! Estimated noise=854.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110093 Jy ! Component: 100 - total flux cleaned = 0.00200776 Jy ! Component: 150 - total flux cleaned = 0.00252477 Jy ! Component: 200 - total flux cleaned = 0.00271125 Jy ! Total flux subtracted in 200 components = 0.00271125 Jy ! Clean residual min=-0.003340 max=0.002630 Jy/beam ! Clean residual mean=-0.000000 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.272586 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 84 components and 0.272586 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9247 mas, bmaj=2.184 mas, bpa=-0.5946 degrees ! Estimated noise=674.577 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00030283 Jy ! Component: 100 - total flux cleaned = -0.000308869 Jy ! Component: 150 - total flux cleaned = -0.000266149 Jy ! Component: 200 - total flux cleaned = -0.00022753 Jy ! Total flux subtracted in 200 components = -0.00022753 Jy ! Clean residual min=-0.002820 max=0.002480 Jy/beam ! Clean residual mean=0.000000 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.272358 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 109 components and 0.272358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168177Jy sigma=0.001195 ! Fit after self-cal, rms=0.168176Jy sigma=0.001195 wmodel J1728-0350_X_1997_05_07_yyk\_map.mod ! Writing 109 model components to file: J1728-0350_X_1997_05_07_yyk_map.mod wobs J1728-0350_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1728-0350_X_1997_05_07_yyk_uvs.fits wwins J1728-0350_X_1997_05_07_yyk\_map.win ! wwins: Wrote 3 windows to J1728-0350_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104131 Jy ! Component: 100 - total flux cleaned = -0.00149228 Jy ! Component: 150 - total flux cleaned = -0.00190843 Jy ! Component: 200 - total flux cleaned = -0.00237848 Jy ! Component: 250 - total flux cleaned = -0.00252827 Jy ! Component: 300 - total flux cleaned = -0.00274077 Jy ! Component: 350 - total flux cleaned = -0.0028428 Jy ! Component: 400 - total flux cleaned = -0.00284309 Jy ! Component: 450 - total flux cleaned = -0.00284294 Jy ! Component: 500 - total flux cleaned = -0.00284295 Jy ! Component: 550 - total flux cleaned = -0.00284217 Jy ! Component: 600 - total flux cleaned = -0.00284235 Jy ! Component: 650 - total flux cleaned = -0.00284221 Jy ! Component: 700 - total flux cleaned = -0.00286966 Jy ! Component: 750 - total flux cleaned = -0.00278852 Jy ! Component: 800 - total flux cleaned = -0.002868 Jy ! Component: 850 - total flux cleaned = -0.00281598 Jy ! Component: 900 - total flux cleaned = -0.00279064 Jy ! Component: 950 - total flux cleaned = -0.00279012 Jy ! Component: 1000 - total flux cleaned = -0.00278997 Jy ! Component: 1050 - total flux cleaned = -0.00276577 Jy ! Component: 1100 - total flux cleaned = -0.00276587 Jy ! Component: 1150 - total flux cleaned = -0.00271956 Jy ! Component: 1200 - total flux cleaned = -0.00274292 Jy ! Component: 1250 - total flux cleaned = -0.0027431 Jy ! Component: 1300 - total flux cleaned = -0.00274337 Jy ! Component: 1350 - total flux cleaned = -0.00280861 Jy ! Component: 1400 - total flux cleaned = -0.00280813 Jy ! Component: 1450 - total flux cleaned = -0.00280784 Jy ! Component: 1500 - total flux cleaned = -0.00282873 Jy ! Component: 1550 - total flux cleaned = -0.00284917 Jy ! Component: 1600 - total flux cleaned = -0.00278844 Jy ! Component: 1650 - total flux cleaned = -0.00278869 Jy ! Component: 1700 - total flux cleaned = -0.00272995 Jy ! Component: 1750 - total flux cleaned = -0.00272997 Jy ! Component: 1800 - total flux cleaned = -0.00261494 Jy ! Component: 1850 - total flux cleaned = -0.0025964 Jy ! Component: 1900 - total flux cleaned = -0.00257756 Jy ! Component: 1950 - total flux cleaned = -0.00255895 Jy ! Component: 2000 - total flux cleaned = -0.00250406 Jy ! Total flux subtracted in 2048 components = -0.00245004 Jy ! Clean residual min=-0.001113 max=0.001316 Jy/beam ! Clean residual mean=0.000002 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.269908 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 240 components and 0.269908 Jy ![Exited script file: muppet] wmap "J1728-0350_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9247 x 2.184 at -0.5946 degrees (North through East) ! Clean map min=-0.0022054 max=0.21933 Jy/beam ! Writing clean map to FITS file: J1728-0350_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.219333 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000336375 device "J1728-0350_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1728-0350_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.460088 0.460088 0.920177 1.84035 3.68071 7.36142 14.7228 29.4457 58.8913 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.219 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9247 x 2.184 at -0.5946 degrees (North through East) ! Clean map min=-0.0022054 max=0.21933 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1728-0350_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1728-0350_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1728-0350_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 07:23:35 2007