! Started logfile: J1728-0350_S_1997_05_07_yyk_uvs.log on Sun Jan 7 19:14:50 2007 obs J1728-0350_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1728-0350_S_1997_05_07_yyk_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.785134 visibilities/baseline/integration-bin. ! Found source: J1728-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 20492 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1728-0350_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.31555 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=6.993 mas, bpa=2.116 degrees ! Estimated noise=2024.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.135146 Jy ! Component: 100 - total flux cleaned = 0.17227 Jy ! Total flux subtracted in 100 components = 0.17227 Jy ! Clean residual min=-0.012653 max=0.019983 Jy/beam ! Clean residual mean=0.000116 rms=0.003718 Jy/beam ! Combined flux in latest and established models = 0.17227 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.17227 Jy ! ! Correcting IF 1. ! A total of 306 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.269431Jy sigma=0.001207 ! Fit after self-cal, rms=0.269090Jy sigma=0.001206 ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=6.993 mas, bpa=2.116 degrees ! Estimated noise=2024.98 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=8.501 mas, bpa=-1.794 degrees ! Estimated noise=1036.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -4.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247494 Jy ! Component: 100 - total flux cleaned = 0.0314377 Jy ! Component: 150 - total flux cleaned = 0.0328994 Jy ! Component: 200 - total flux cleaned = 0.0342721 Jy ! Total flux subtracted in 200 components = 0.0342721 Jy ! Clean residual min=-0.006324 max=0.008339 Jy/beam ! Clean residual mean=0.000100 rms=0.002149 Jy/beam ! Combined flux in latest and established models = 0.206542 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.206542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267420Jy sigma=0.001197 ! Fit after self-cal, rms=0.267251Jy sigma=0.001197 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.768 x 8.501 at -1.794 degrees (North through East) ! Clean map min=-0.0058073 max=0.14852 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02418 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.00* KP 0.94 ! LA 1.05 MK 0.97 NL 1.00* OV 1.08 ! PT 0.90 SC 0.88 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01049 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.14 HN 1.00* KP 0.98 ! LA 0.90 MK 0.86 NL 1.10 OV 1.07 ! PT 0.87 SC 1.01 ! ! ! Fit before self-cal, rms=0.267251Jy sigma=0.001197 ! Fit after self-cal, rms=0.264870Jy sigma=0.001195 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264870Jy sigma=0.001195 ! Fit after self-cal, rms=0.264870Jy sigma=0.001195 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.677 mas, bmaj=8.39 mas, bpa=-2.425 degrees ! Estimated noise=1033.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533797 Jy ! Component: 100 - total flux cleaned = 0.00598777 Jy ! Component: 150 - total flux cleaned = 0.00608665 Jy ! Component: 200 - total flux cleaned = 0.00634928 Jy ! Total flux subtracted in 200 components = 0.00634928 Jy ! Clean residual min=-0.004573 max=0.005448 Jy/beam ! Clean residual mean=0.000013 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.212891 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.212891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264732Jy sigma=0.001195 ! Fit after self-cal, rms=0.264704Jy sigma=0.001195 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264704Jy sigma=0.001195 ! Fit after self-cal, rms=0.263986Jy sigma=0.001191 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159646 Jy ! Component: 100 - total flux cleaned = 0.00199926 Jy ! Component: 150 - total flux cleaned = 0.00231594 Jy ! Component: 200 - total flux cleaned = 0.00245494 Jy ! Total flux subtracted in 200 components = 0.00245494 Jy ! Clean residual min=-0.004560 max=0.005425 Jy/beam ! Clean residual mean=0.000000 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.215346 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 90 components and 0.215346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263908Jy sigma=0.001191 ! Fit after self-cal, rms=0.263821Jy sigma=0.001190 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.677 x 8.39 at -2.425 degrees (North through East) ! Clean map min=-0.0044508 max=0.14716 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263821Jy sigma=0.001190 ! Fit after self-cal, rms=0.260641Jy sigma=0.001189 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260641Jy sigma=0.001189 ! Fit after self-cal, rms=0.260640Jy sigma=0.001189 ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=8.317 mas, bpa=-2.176 degrees ! Estimated noise=1027.41 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140376 Jy ! Component: 100 - total flux cleaned = 0.00140684 Jy ! Component: 150 - total flux cleaned = 0.00140894 Jy ! Component: 200 - total flux cleaned = 0.00136477 Jy ! Total flux subtracted in 200 components = 0.00136477 Jy ! Clean residual min=-0.004645 max=0.004846 Jy/beam ! Clean residual mean=-0.000010 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.216711 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 0.216711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260608Jy sigma=0.001189 ! Fit after self-cal, rms=0.260612Jy sigma=0.001189 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260612Jy sigma=0.001189 ! Fit after self-cal, rms=0.260935Jy sigma=0.001189 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260935Jy sigma=0.001189 ! Fit after self-cal, rms=0.260944Jy sigma=0.001189 ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=8.286 mas, bpa=-1.802 degrees ! Estimated noise=1030.84 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012258 Jy ! Component: 100 - total flux cleaned = 0.00103974 Jy ! Component: 150 - total flux cleaned = 0.000942033 Jy ! Component: 200 - total flux cleaned = 0.000897945 Jy ! Total flux subtracted in 200 components = 0.000897945 Jy ! Clean residual min=-0.004477 max=0.004824 Jy/beam ! Clean residual mean=-0.000047 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.217609 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 118 components and 0.217609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260908Jy sigma=0.001189 ! Fit after self-cal, rms=0.260913Jy sigma=0.001189 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.245 mas, bmaj=14.07 mas, bpa=9.221 degrees ! Estimated noise=1259.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236188 Jy ! Component: 100 - total flux cleaned = 0.000137386 Jy ! Component: 150 - total flux cleaned = 5.4477e-05 Jy ! Component: 200 - total flux cleaned = -1.55523e-05 Jy ! Total flux subtracted in 200 components = -1.55523e-05 Jy ! Clean residual min=-0.005021 max=0.005666 Jy/beam ! Clean residual mean=-0.000088 rms=0.001718 Jy/beam ! Combined flux in latest and established models = 0.217593 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 133 components and 0.217593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260912Jy sigma=0.001189 ! Fit after self-cal, rms=0.260914Jy sigma=0.001189 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.806 mas, bmaj=6.932 mas, bpa=2.184 degrees ! Estimated noise=1992.41 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.135714 Jy ! Component: 100 - total flux cleaned = 0.17914 Jy ! Component: 150 - total flux cleaned = 0.19861 Jy ! Component: 200 - total flux cleaned = 0.204987 Jy ! Total flux subtracted in 200 components = 0.204987 Jy ! Clean residual min=-0.007187 max=0.008246 Jy/beam ! Clean residual mean=0.000017 rms=0.002284 Jy/beam ! Combined flux in latest and established models = 0.204987 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.204987 Jy ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=8.286 mas, bpa=-1.802 degrees ! Estimated noise=1030.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00755487 Jy ! Component: 100 - total flux cleaned = 0.0087802 Jy ! Component: 150 - total flux cleaned = 0.00991191 Jy ! Component: 200 - total flux cleaned = 0.0105843 Jy ! Total flux subtracted in 200 components = 0.0105843 Jy ! Clean residual min=-0.004596 max=0.004820 Jy/beam ! Clean residual mean=-0.000036 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.215572 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 62 components and 0.215572 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.245 mas, bmaj=14.07 mas, bpa=9.221 degrees ! Estimated noise=1259.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012373 Jy ! Component: 100 - total flux cleaned = 0.0014376 Jy ! Component: 150 - total flux cleaned = 0.00155404 Jy ! Component: 200 - total flux cleaned = 0.00171324 Jy ! Total flux subtracted in 200 components = 0.00171324 Jy ! Clean residual min=-0.005027 max=0.005907 Jy/beam ! Clean residual mean=-0.000083 rms=0.001743 Jy/beam ! Combined flux in latest and established models = 0.217285 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.217285 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=8.286 mas, bpa=-1.802 degrees ! Estimated noise=1030.84 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000578808 Jy ! Component: 100 - total flux cleaned = -0.000504411 Jy ! Component: 150 - total flux cleaned = -0.00044115 Jy ! Component: 200 - total flux cleaned = -0.000438966 Jy ! Total flux subtracted in 200 components = -0.000438966 Jy ! Clean residual min=-0.004558 max=0.004830 Jy/beam ! Clean residual mean=-0.000042 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.216846 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.216846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260954Jy sigma=0.001189 ! Fit after self-cal, rms=0.260957Jy sigma=0.001189 wmodel J1728-0350_S_1997_05_07_yyk\_map.mod ! Writing 94 model components to file: J1728-0350_S_1997_05_07_yyk_map.mod wobs J1728-0350_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1728-0350_S_1997_05_07_yyk_uvs.fits wwins J1728-0350_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J1728-0350_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140792 Jy ! Component: 100 - total flux cleaned = 0.0024296 Jy ! Component: 150 - total flux cleaned = 0.00279615 Jy ! Component: 200 - total flux cleaned = 0.00335583 Jy ! Component: 250 - total flux cleaned = 0.00348956 Jy ! Component: 300 - total flux cleaned = 0.0034889 Jy ! Component: 350 - total flux cleaned = 0.003303 Jy ! Component: 400 - total flux cleaned = 0.00306004 Jy ! Component: 450 - total flux cleaned = 0.00282298 Jy ! Component: 500 - total flux cleaned = 0.00247715 Jy ! Component: 550 - total flux cleaned = 0.00214188 Jy ! Component: 600 - total flux cleaned = 0.00192452 Jy ! Component: 650 - total flux cleaned = 0.00176568 Jy ! Component: 700 - total flux cleaned = 0.00150768 Jy ! Component: 750 - total flux cleaned = 0.00120555 Jy ! Component: 800 - total flux cleaned = 0.000910591 Jy ! Component: 850 - total flux cleaned = 0.000574592 Jy ! Component: 900 - total flux cleaned = 0.000245718 Jy ! Component: 950 - total flux cleaned = -0.000169304 Jy ! Component: 1000 - total flux cleaned = -0.000440415 Jy ! Component: 1050 - total flux cleaned = -0.000574225 Jy ! Component: 1100 - total flux cleaned = -0.00083579 Jy ! Component: 1150 - total flux cleaned = -0.0010068 Jy ! Component: 1200 - total flux cleaned = -0.00117496 Jy ! Component: 1250 - total flux cleaned = -0.00142274 Jy ! Component: 1300 - total flux cleaned = -0.00154437 Jy ! Component: 1350 - total flux cleaned = -0.00174414 Jy ! Component: 1400 - total flux cleaned = -0.00194029 Jy ! Component: 1450 - total flux cleaned = -0.00205689 Jy ! Component: 1500 - total flux cleaned = -0.00224686 Jy ! Component: 1550 - total flux cleaned = -0.00224729 Jy ! Component: 1600 - total flux cleaned = -0.0022848 Jy ! Component: 1650 - total flux cleaned = -0.00239473 Jy ! Component: 1700 - total flux cleaned = -0.00239483 Jy ! Component: 1750 - total flux cleaned = -0.00246601 Jy ! Component: 1800 - total flux cleaned = -0.00253562 Jy ! Component: 1850 - total flux cleaned = -0.00250078 Jy ! Component: 1900 - total flux cleaned = -0.00250136 Jy ! Component: 1950 - total flux cleaned = -0.00260219 Jy ! Component: 2000 - total flux cleaned = -0.00250227 Jy ! Total flux subtracted in 2048 components = -0.00256858 Jy ! Clean residual min=-0.002616 max=0.002070 Jy/beam ! Clean residual mean=-0.000074 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.214277 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 212 components and 0.214277 Jy ![Exited script file: muppet] wmap "J1728-0350_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.605 x 8.286 at -1.802 degrees (North through East) ! Clean map min=-0.0036271 max=0.14649 Jy/beam ! Writing clean map to FITS file: J1728-0350_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.146493 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000681838 device "J1728-0350_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1728-0350_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.39632 1.39632 2.79264 5.58529 11.1706 22.3412 44.6823 89.3646 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.146 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.605 x 8.286 at -1.802 degrees (North through East) ! Clean map min=-0.0036271 max=0.14649 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1728-0350_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1728-0350_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1728-0350_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 19:14:57 2007