! Started logfile: J1713-2658_S_1997_08_27_yyk_uvs.log on Sun Jan 7 19:11:12 2007 obs J1713-2658_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1713-2658_S_1997_08_27_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.653666 visibilities/baseline/integration-bin. ! Found source: J1713-2658 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 17296 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1713-2658_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.918633 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=6.261 mas, bpa=-19.15 degrees ! Estimated noise=4147.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.475655 Jy ! Component: 100 - total flux cleaned = 0.63722 Jy ! Total flux subtracted in 100 components = 0.63722 Jy ! Clean residual min=-0.111696 max=0.103883 Jy/beam ! Clean residual mean=-0.001298 rms=0.027444 Jy/beam ! Combined flux in latest and established models = 0.63722 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.63722 Jy ! ! Correcting IF 1. ! A total of 473 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 289 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 289 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 289 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.623562Jy sigma=0.001891 ! Fit after self-cal, rms=0.578864Jy sigma=0.001786 ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=6.261 mas, bpa=-19.15 degrees ! Estimated noise=4147.99 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=7.855 mas, bpa=-13.69 degrees ! Estimated noise=1700.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.247006 Jy ! Component: 100 - total flux cleaned = 0.349024 Jy ! Component: 150 - total flux cleaned = 0.39804 Jy ! Component: 200 - total flux cleaned = 0.408602 Jy ! Total flux subtracted in 200 components = 0.408602 Jy ! Clean residual min=-0.050455 max=0.092337 Jy/beam ! Clean residual mean=-0.000655 rms=0.017222 Jy/beam ! Combined flux in latest and established models = 1.04582 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 43 components and 1.04582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.504369Jy sigma=0.001522 ! Fit after self-cal, rms=0.503851Jy sigma=0.001521 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.317 x 7.855 at -13.69 degrees (North through East) ! Clean map min=-0.048707 max=0.65113 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02957 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.13 HN 0.86 KP 0.89 ! LA 0.94 MK 0.99 NL 1.00* OV 1.10 ! PT 1.00* SC 0.86 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.977432 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.10 HN 1.02 KP 0.87 ! LA 0.99 MK 1.02 NL 1.14 OV 1.13 ! PT 0.95 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03725 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.90 KP 0.83 ! LA 0.74 MK 0.88 NL 1.08 OV 1.03 ! PT 1.11 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.989711 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 1.02 KP 0.85 ! LA 0.84 MK 1.01 NL 1.29 OV 1.03 ! PT 0.94 SC 1.04 ! ! ! Fit before self-cal, rms=0.503851Jy sigma=0.001521 ! Fit after self-cal, rms=0.476434Jy sigma=0.001469 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.476434Jy sigma=0.001469 ! Fit after self-cal, rms=0.476615Jy sigma=0.001469 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=7.861 mas, bpa=-13.58 degrees ! Estimated noise=1663.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000461567 Jy ! Component: 100 - total flux cleaned = 0.00125809 Jy ! Component: 150 - total flux cleaned = 0.00127758 Jy ! Component: 200 - total flux cleaned = 0.00197925 Jy ! Total flux subtracted in 200 components = 0.00197925 Jy ! Clean residual min=-0.048147 max=0.059164 Jy/beam ! Clean residual mean=-0.000440 rms=0.014425 Jy/beam ! Combined flux in latest and established models = 1.0478 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 1.0478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.474548Jy sigma=0.001463 ! Fit after self-cal, rms=0.474424Jy sigma=0.001463 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.474424Jy sigma=0.001463 ! Fit after self-cal, rms=0.458288Jy sigma=0.001417 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -1.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514184 Jy ! Component: 100 - total flux cleaned = 0.0469259 Jy ! Component: 150 - total flux cleaned = 0.0431727 Jy ! Component: 200 - total flux cleaned = 0.039976 Jy ! Total flux subtracted in 200 components = 0.039976 Jy ! Clean residual min=-0.040390 max=0.046367 Jy/beam ! Clean residual mean=-0.000618 rms=0.011984 Jy/beam ! Combined flux in latest and established models = 1.08778 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 80 components and 1.08778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.446315Jy sigma=0.001383 ! Fit after self-cal, rms=0.443158Jy sigma=0.001375 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.306 x 7.861 at -13.58 degrees (North through East) ! Clean map min=-0.04178 max=0.64468 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.443158Jy sigma=0.001375 ! Fit after self-cal, rms=18.725197Jy sigma=0.001248 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.725197Jy sigma=0.001248 ! Fit after self-cal, rms=18.726435Jy sigma=0.001248 ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=9.254 mas, bpa=-10.88 degrees ! Estimated noise=1647.59 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365794 Jy ! Component: 100 - total flux cleaned = 0.0377518 Jy ! Component: 150 - total flux cleaned = 0.0370401 Jy ! Component: 200 - total flux cleaned = 0.0356351 Jy ! Total flux subtracted in 200 components = 0.0356351 Jy ! Clean residual min=-0.022913 max=0.027612 Jy/beam ! Clean residual mean=-0.000390 rms=0.006714 Jy/beam ! Combined flux in latest and established models = 1.12341 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 108 components and 1.12341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.726629Jy sigma=0.001228 ! Fit after self-cal, rms=18.725918Jy sigma=0.001225 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18.725918Jy sigma=0.001225 ! Fit after self-cal, rms=26.500015Jy sigma=0.001221 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=26.500015Jy sigma=0.001221 ! Fit after self-cal, rms=26.500181Jy sigma=0.001221 ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=9.283 mas, bpa=-10.79 degrees ! Estimated noise=1635.17 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214683 Jy ! Component: 100 - total flux cleaned = 0.0237531 Jy ! Component: 150 - total flux cleaned = 0.0237848 Jy ! Component: 200 - total flux cleaned = 0.0233191 Jy ! Total flux subtracted in 200 components = 0.0233191 Jy ! Clean residual min=-0.018188 max=0.018419 Jy/beam ! Clean residual mean=-0.000296 rms=0.005056 Jy/beam ! Combined flux in latest and established models = 1.14673 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 120 components and 1.14673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=26.500328Jy sigma=0.001213 ! Fit after self-cal, rms=26.499910Jy sigma=0.001211 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.348 mas, bmaj=17.17 mas, bpa=-7.727 degrees ! Estimated noise=2081.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697615 Jy ! Component: 100 - total flux cleaned = 0.00594157 Jy ! Component: 150 - total flux cleaned = 0.00471381 Jy ! Component: 200 - total flux cleaned = 0.00342221 Jy ! Total flux subtracted in 200 components = 0.00342221 Jy ! Clean residual min=-0.020409 max=0.019951 Jy/beam ! Clean residual mean=-0.000656 rms=0.006209 Jy/beam ! Combined flux in latest and established models = 1.15015 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 142 components and 1.15015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=26.500053Jy sigma=0.001210 ! Fit after self-cal, rms=26.499538Jy sigma=0.001209 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=7.192 mas, bpa=-12.4 degrees ! Estimated noise=5026.2 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.590803 Jy ! Component: 100 - total flux cleaned = 0.809943 Jy ! Component: 150 - total flux cleaned = 0.941067 Jy ! Component: 200 - total flux cleaned = 1.0246 Jy ! Total flux subtracted in 200 components = 1.0246 Jy ! Clean residual min=-0.030872 max=0.037643 Jy/beam ! Clean residual mean=0.000064 rms=0.009623 Jy/beam ! Combined flux in latest and established models = 1.0246 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 1.0246 Jy ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=9.283 mas, bpa=-10.79 degrees ! Estimated noise=1635.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0694822 Jy ! Component: 100 - total flux cleaned = 0.106176 Jy ! Component: 150 - total flux cleaned = 0.122566 Jy ! Component: 200 - total flux cleaned = 0.12647 Jy ! Total flux subtracted in 200 components = 0.12647 Jy ! Clean residual min=-0.018112 max=0.017569 Jy/beam ! Clean residual mean=-0.000354 rms=0.004548 Jy/beam ! Combined flux in latest and established models = 1.15107 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 95 components and 1.15106 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.348 mas, bmaj=17.17 mas, bpa=-7.727 degrees ! Estimated noise=2081.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400965 Jy ! Component: 100 - total flux cleaned = 0.00350922 Jy ! Component: 150 - total flux cleaned = 0.00308383 Jy ! Component: 200 - total flux cleaned = 0.00307345 Jy ! Total flux subtracted in 200 components = 0.00307345 Jy ! Clean residual min=-0.019846 max=0.019338 Jy/beam ! Clean residual mean=-0.000713 rms=0.006040 Jy/beam ! Combined flux in latest and established models = 1.15414 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 112 components and 1.15414 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=9.283 mas, bpa=-10.79 degrees ! Estimated noise=1635.17 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162641 Jy ! Component: 100 - total flux cleaned = 0.000555894 Jy ! Component: 150 - total flux cleaned = 0.000879315 Jy ! Component: 200 - total flux cleaned = 0.00116081 Jy ! Total flux subtracted in 200 components = 0.00116081 Jy ! Clean residual min=-0.016387 max=0.013331 Jy/beam ! Clean residual mean=-0.000361 rms=0.003977 Jy/beam ! Combined flux in latest and established models = 1.1553 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 129 components and 1.1553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=26.499170Jy sigma=0.001207 ! Fit after self-cal, rms=26.499182Jy sigma=0.001207 wmodel J1713-2658_S_1997_08_27_yyk\_map.mod ! Writing 129 model components to file: J1713-2658_S_1997_08_27_yyk_map.mod wobs J1713-2658_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1713-2658_S_1997_08_27_yyk_uvs.fits wwins J1713-2658_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J1713-2658_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00696221 Jy ! Component: 100 - total flux cleaned = -0.00971191 Jy ! Component: 150 - total flux cleaned = -0.00973391 Jy ! Component: 200 - total flux cleaned = -0.00954037 Jy ! Component: 250 - total flux cleaned = -0.0104122 Jy ! Component: 300 - total flux cleaned = -0.0115696 Jy ! Component: 350 - total flux cleaned = -0.0123668 Jy ! Component: 400 - total flux cleaned = -0.012676 Jy ! Component: 450 - total flux cleaned = -0.0131199 Jy ! Component: 500 - total flux cleaned = -0.0134081 Jy ! Component: 550 - total flux cleaned = -0.0138283 Jy ! Component: 600 - total flux cleaned = -0.0142383 Jy ! Component: 650 - total flux cleaned = -0.0145025 Jy ! Component: 700 - total flux cleaned = -0.0150197 Jy ! Component: 750 - total flux cleaned = -0.0157728 Jy ! Component: 800 - total flux cleaned = -0.0162628 Jy ! Component: 850 - total flux cleaned = -0.0169831 Jy ! Component: 900 - total flux cleaned = -0.0175671 Jy ! Component: 950 - total flux cleaned = -0.0182531 Jy ! Component: 1000 - total flux cleaned = -0.0186985 Jy ! Component: 1050 - total flux cleaned = -0.0191347 Jy ! Component: 1100 - total flux cleaned = -0.0195598 Jy ! Component: 1150 - total flux cleaned = -0.0199789 Jy ! Component: 1200 - total flux cleaned = -0.0206946 Jy ! Component: 1250 - total flux cleaned = -0.021096 Jy ! Component: 1300 - total flux cleaned = -0.0215864 Jy ! Component: 1350 - total flux cleaned = -0.0218763 Jy ! Component: 1400 - total flux cleaned = -0.0223463 Jy ! Component: 1450 - total flux cleaned = -0.0227155 Jy ! Component: 1500 - total flux cleaned = -0.023351 Jy ! Component: 1550 - total flux cleaned = -0.0237969 Jy ! Component: 1600 - total flux cleaned = -0.0243217 Jy ! Component: 1650 - total flux cleaned = -0.0249245 Jy ! Component: 1700 - total flux cleaned = -0.0253477 Jy ! Component: 1750 - total flux cleaned = -0.0260947 Jy ! Component: 1800 - total flux cleaned = -0.0267472 Jy ! Component: 1850 - total flux cleaned = -0.0272291 Jy ! Component: 1900 - total flux cleaned = -0.0279396 Jy ! Component: 1950 - total flux cleaned = -0.0284061 Jy ! Component: 2000 - total flux cleaned = -0.0292494 Jy ! Total flux subtracted in 2048 components = -0.0298536 Jy ! Clean residual min=-0.004335 max=0.004557 Jy/beam ! Clean residual mean=-0.000234 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 1.12545 Jy keep ! Adding 146 model components to the UV plane model. ! The established model now contains 275 components and 1.12545 Jy ![Exited script file: muppet] wmap "J1713-2658_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.333 x 9.283 at -10.79 degrees (North through East) ! Clean map min=-0.014929 max=0.6909 Jy/beam ! Writing clean map to FITS file: J1713-2658_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.690896 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00157352 device "J1713-2658_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1713-2658_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.683253 0.683253 1.36651 2.73301 5.46603 10.9321 21.8641 43.7282 87.4564 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0047 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.69 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.333 x 9.283 at -10.79 degrees (North through East) ! Clean map min=-0.014929 max=0.6909 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1713-2658_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1713-2658_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1713-2658_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 19:11:19 2007