! Started logfile: J1626-2951_S_1997_08_27_yyk_uvs.log on Sun Jan 7 18:58:55 2007 obs J1626-2951_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1626-2951_S_1997_08_27_yyk_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.77094 visibilities/baseline/integration-bin. ! Found source: J1626-2951 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 19844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1626-2951_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.32062 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=5.885 mas, bpa=-15.59 degrees ! Estimated noise=2666.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.769196 Jy ! Component: 100 - total flux cleaned = 1.03049 Jy ! Total flux subtracted in 100 components = 1.03049 Jy ! Clean residual min=-0.110857 max=0.190089 Jy/beam ! Clean residual mean=0.002376 rms=0.034885 Jy/beam ! Combined flux in latest and established models = 1.03049 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.03049 Jy ! ! Correcting IF 1. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.892110Jy sigma=0.002609 ! Fit after self-cal, rms=0.814901Jy sigma=0.002335 ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=5.885 mas, bpa=-15.59 degrees ! Estimated noise=2666.56 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.183 mas, bpa=-15.42 degrees ! Estimated noise=1686.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.344358 Jy ! Component: 100 - total flux cleaned = 0.495219 Jy ! Component: 150 - total flux cleaned = 0.568187 Jy ! Component: 200 - total flux cleaned = 0.59743 Jy ! Total flux subtracted in 200 components = 0.59743 Jy ! Clean residual min=-0.087903 max=0.142348 Jy/beam ! Clean residual mean=-0.002318 rms=0.026349 Jy/beam ! Combined flux in latest and established models = 1.62792 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 1.62792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.749420Jy sigma=0.001987 ! Fit after self-cal, rms=0.749516Jy sigma=0.001986 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.185 x 7.183 at -15.42 degrees (North through East) ! Clean map min=-0.08433 max=0.88827 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01497 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.01 HN 0.95 KP 0.88 ! LA 0.89 MK 0.98 NL 1.00* OV 1.22 ! PT 0.87 SC 0.88 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.950638 ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.12 HN 1.24 KP 0.93 ! LA 1.02 MK 0.97 NL 1.06 OV 1.09 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04822 ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.97 HN 0.95 KP 0.86 ! LA 0.75 MK 0.83 NL 1.05 OV 1.02 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.995227 ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.03 HN 1.12 KP 0.90 ! LA 0.83 MK 0.96 NL 1.17 OV 1.03 ! PT 0.83 SC 0.99 ! ! ! Fit before self-cal, rms=0.749516Jy sigma=0.001986 ! Fit after self-cal, rms=0.742577Jy sigma=0.001908 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.742577Jy sigma=0.001908 ! Fit after self-cal, rms=0.743294Jy sigma=0.001907 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=7.072 mas, bpa=-16.29 degrees ! Estimated noise=1639.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.5, 4.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.144583 Jy ! Component: 100 - total flux cleaned = 0.173358 Jy ! Component: 150 - total flux cleaned = 0.171589 Jy ! Component: 200 - total flux cleaned = 0.171535 Jy ! Total flux subtracted in 200 components = 0.171535 Jy ! Clean residual min=-0.066065 max=0.057738 Jy/beam ! Clean residual mean=-0.004697 rms=0.016149 Jy/beam ! Combined flux in latest and established models = 1.79945 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 64 components and 1.79945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.729982Jy sigma=0.001827 ! Fit after self-cal, rms=0.727461Jy sigma=0.001822 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.727461Jy sigma=0.001822 ! Fit after self-cal, rms=0.704453Jy sigma=0.001747 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245811 Jy ! Component: 100 - total flux cleaned = 0.0297107 Jy ! Component: 150 - total flux cleaned = 0.0319858 Jy ! Component: 200 - total flux cleaned = 0.0339676 Jy ! Total flux subtracted in 200 components = 0.0339676 Jy ! Clean residual min=-0.071577 max=0.060801 Jy/beam ! Clean residual mean=-0.005019 rms=0.015786 Jy/beam ! Combined flux in latest and established models = 1.83342 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 1.83342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.702002Jy sigma=0.001734 ! Fit after self-cal, rms=0.700308Jy sigma=0.001730 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.135 x 7.072 at -16.29 degrees (North through East) ! Clean map min=-0.071066 max=0.88659 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.700308Jy sigma=0.001730 ! Fit after self-cal, rms=37.083069Jy sigma=0.001413 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=37.083069Jy sigma=0.001413 ! Fit after self-cal, rms=37.089325Jy sigma=0.001412 ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=9.06 mas, bpa=-8.801 degrees ! Estimated noise=1633.55 mJy/beam. ! Added new window around map position (-5, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.064218 Jy ! Component: 100 - total flux cleaned = 0.0743524 Jy ! Component: 150 - total flux cleaned = 0.0744068 Jy ! Component: 200 - total flux cleaned = 0.0769137 Jy ! Total flux subtracted in 200 components = 0.0769137 Jy ! Clean residual min=-0.031183 max=0.034531 Jy/beam ! Clean residual mean=-0.001125 rms=0.010027 Jy/beam ! Combined flux in latest and established models = 1.91033 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 111 components and 1.91033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=37.090530Jy sigma=0.001365 ! Fit after self-cal, rms=37.088413Jy sigma=0.001361 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=37.088413Jy sigma=0.001361 ! Fit after self-cal, rms=39.340954Jy sigma=0.001353 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=39.340954Jy sigma=0.001353 ! Fit after self-cal, rms=39.340099Jy sigma=0.001352 ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=9.099 mas, bpa=-8.443 degrees ! Estimated noise=1612.64 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328936 Jy ! Component: 100 - total flux cleaned = 0.0429192 Jy ! Component: 150 - total flux cleaned = 0.0429581 Jy ! Component: 200 - total flux cleaned = 0.0438256 Jy ! Total flux subtracted in 200 components = 0.0438256 Jy ! Clean residual min=-0.027446 max=0.026038 Jy/beam ! Clean residual mean=-0.000737 rms=0.007683 Jy/beam ! Combined flux in latest and established models = 1.95416 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 131 components and 1.95416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=39.340580Jy sigma=0.001335 ! Fit after self-cal, rms=39.339890Jy sigma=0.001334 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.492 mas, bmaj=18.32 mas, bpa=-3.85 degrees ! Estimated noise=2099.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000867725 Jy ! Component: 100 - total flux cleaned = 0.00178483 Jy ! Component: 150 - total flux cleaned = 0.000990539 Jy ! Component: 200 - total flux cleaned = 0.000323173 Jy ! Total flux subtracted in 200 components = 0.000323173 Jy ! Clean residual min=-0.029038 max=0.026633 Jy/beam ! Clean residual mean=-0.001539 rms=0.009462 Jy/beam ! Combined flux in latest and established models = 1.95448 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 144 components and 1.95448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=39.340153Jy sigma=0.001331 ! Fit after self-cal, rms=39.339462Jy sigma=0.001329 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.52 mas, bmaj=6.865 mas, bpa=-9.039 degrees ! Estimated noise=2918.53 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.872687 Jy ! Component: 100 - total flux cleaned = 1.17925 Jy ! Component: 150 - total flux cleaned = 1.37544 Jy ! Component: 200 - total flux cleaned = 1.51224 Jy ! Total flux subtracted in 200 components = 1.51224 Jy ! Clean residual min=-0.055388 max=0.069365 Jy/beam ! Clean residual mean=0.001617 rms=0.014890 Jy/beam ! Combined flux in latest and established models = 1.51224 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 1.51224 Jy ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=9.099 mas, bpa=-8.443 degrees ! Estimated noise=1612.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.154051 Jy ! Component: 100 - total flux cleaned = 0.250321 Jy ! Component: 150 - total flux cleaned = 0.31585 Jy ! Component: 200 - total flux cleaned = 0.360766 Jy ! Total flux subtracted in 200 components = 0.360766 Jy ! Clean residual min=-0.021699 max=0.026474 Jy/beam ! Clean residual mean=-0.000335 rms=0.007539 Jy/beam ! Combined flux in latest and established models = 1.87301 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 101 components and 1.87301 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.492 mas, bmaj=18.32 mas, bpa=-3.85 degrees ! Estimated noise=2099.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0471828 Jy ! Component: 100 - total flux cleaned = 0.0611427 Jy ! Component: 150 - total flux cleaned = 0.0624798 Jy ! Component: 200 - total flux cleaned = 0.0630659 Jy ! Total flux subtracted in 200 components = 0.0630659 Jy ! Clean residual min=-0.028564 max=0.025303 Jy/beam ! Clean residual mean=-0.001290 rms=0.008781 Jy/beam ! Combined flux in latest and established models = 1.93607 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 136 components and 1.93607 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=9.099 mas, bpa=-8.443 degrees ! Estimated noise=1612.64 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498976 Jy ! Component: 100 - total flux cleaned = 0.00616439 Jy ! Component: 150 - total flux cleaned = 0.00668979 Jy ! Component: 200 - total flux cleaned = 0.00748949 Jy ! Total flux subtracted in 200 components = 0.00748949 Jy ! Clean residual min=-0.018011 max=0.021642 Jy/beam ! Clean residual mean=-0.000659 rms=0.005664 Jy/beam ! Combined flux in latest and established models = 1.94356 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 162 components and 1.94356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=39.341568Jy sigma=0.001318 ! Fit after self-cal, rms=39.340511Jy sigma=0.001315 wmodel J1626-2951_S_1997_08_27_yyk\_map.mod ! Writing 162 model components to file: J1626-2951_S_1997_08_27_yyk_map.mod wobs J1626-2951_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1626-2951_S_1997_08_27_yyk_uvs.fits wwins J1626-2951_S_1997_08_27_yyk\_map.win ! wwins: Wrote 3 windows to J1626-2951_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00057301 Jy ! Component: 100 - total flux cleaned = -0.000677309 Jy ! Component: 150 - total flux cleaned = -0.00209947 Jy ! Component: 200 - total flux cleaned = -0.00317048 Jy ! Component: 250 - total flux cleaned = -0.00419513 Jy ! Component: 300 - total flux cleaned = -0.00589298 Jy ! Component: 350 - total flux cleaned = -0.00728571 Jy ! Component: 400 - total flux cleaned = -0.00907002 Jy ! Component: 450 - total flux cleaned = -0.0114386 Jy ! Component: 500 - total flux cleaned = -0.0133158 Jy ! Component: 550 - total flux cleaned = -0.015138 Jy ! Component: 600 - total flux cleaned = -0.0170952 Jy ! Component: 650 - total flux cleaned = -0.0191849 Jy ! Component: 700 - total flux cleaned = -0.0212173 Jy ! Component: 750 - total flux cleaned = -0.0226581 Jy ! Component: 800 - total flux cleaned = -0.0245879 Jy ! Component: 850 - total flux cleaned = -0.0259556 Jy ! Component: 900 - total flux cleaned = -0.0271242 Jy ! Component: 950 - total flux cleaned = -0.0285887 Jy ! Component: 1000 - total flux cleaned = -0.0297015 Jy ! Component: 1050 - total flux cleaned = -0.0307893 Jy ! Component: 1100 - total flux cleaned = -0.0318581 Jy ! Component: 1150 - total flux cleaned = -0.0333516 Jy ! Component: 1200 - total flux cleaned = -0.0343738 Jy ! Component: 1250 - total flux cleaned = -0.035524 Jy ! Component: 1300 - total flux cleaned = -0.0367936 Jy ! Component: 1350 - total flux cleaned = -0.0374892 Jy ! Component: 1400 - total flux cleaned = -0.0387163 Jy ! Component: 1450 - total flux cleaned = -0.0396553 Jy ! Component: 1500 - total flux cleaned = -0.0407066 Jy ! Component: 1550 - total flux cleaned = -0.0417434 Jy ! Component: 1600 - total flux cleaned = -0.0428866 Jy ! Component: 1650 - total flux cleaned = -0.0441335 Jy ! Component: 1700 - total flux cleaned = -0.0449908 Jy ! Component: 1750 - total flux cleaned = -0.0457163 Jy ! Component: 1800 - total flux cleaned = -0.0469071 Jy ! Component: 1850 - total flux cleaned = -0.0478434 Jy ! Component: 1900 - total flux cleaned = -0.0491126 Jy ! Component: 1950 - total flux cleaned = -0.0499061 Jy ! Component: 2000 - total flux cleaned = -0.050579 Jy ! Total flux subtracted in 2048 components = -0.0516837 Jy ! Clean residual min=-0.006062 max=0.006499 Jy/beam ! Clean residual mean=-0.000342 rms=0.002407 Jy/beam ! Combined flux in latest and established models = 1.89188 Jy keep ! Adding 157 model components to the UV plane model. ! The established model now contains 318 components and 1.89188 Jy ![Exited script file: muppet] wmap "J1626-2951_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.135 x 9.099 at -8.443 degrees (North through East) ! Clean map min=-0.014535 max=1.0423 Jy/beam ! Writing clean map to FITS file: J1626-2951_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.04227 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00238512 device "J1626-2951_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1626-2951_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.686518 0.686518 1.37304 2.74607 5.49214 10.9843 21.9686 43.9371 87.8743 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0071 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.042 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.135 x 9.099 at -8.443 degrees (North through East) ! Clean map min=-0.014535 max=1.0423 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1626-2951_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1626-2951_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1626-2951_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 18:59:02 2007