! Started logfile: J1625-2527_X_1997_08_27_yyk_uvs.log on Mon Jan  8 07:00:48 2007
obs J1625-2527_X_1997_08_27_yyk_uva.fits
! Reading UV FITS file: J1625-2527_X_1997_08_27_yyk_uva.fits
! AN table 1: 146 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.812177 visibilities/baseline/integration-bin.
! Found source: J1625-2527
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 701 lines of history.
! 
! Reading 21344 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1625-2527_X_1997_08_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.3859 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7201 mas, bmaj=1.627 mas, bpa=-16.04 degrees
! Estimated noise=1496.78 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.994736 Jy
! Component: 100  -  total flux cleaned = 1.27663 Jy
! Total flux subtracted in 100 components = 1.27663 Jy
! Clean residual min=-0.138196 max=0.174562 Jy/beam
! Clean residual mean=0.000042 rms=0.030871 Jy/beam
! Combined flux in latest and established models = 1.27663 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 1.27663 Jy
! 
! Correcting IF 1.
!  A total of 160 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 160 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 160 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 160 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.643252Jy  sigma=0.003456
! Fit after  self-cal, rms=0.641705Jy  sigma=0.003447
! Inverting map and beam 
! Estimated beam: bmin=0.7201 mas, bmaj=1.627 mas, bpa=-16.04 degrees
! Estimated noise=1497.32 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8578 mas, bmaj=1.901 mas, bpa=-14.86 degrees
! Estimated noise=869.928 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.2, 14).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.190601 Jy
! Component: 100  -  total flux cleaned = 0.241892 Jy
! Component: 150  -  total flux cleaned = 0.262545 Jy
! Component: 200  -  total flux cleaned = 0.269949 Jy
! Total flux subtracted in 200 components = 0.269949 Jy
! Clean residual min=-0.084809 max=0.118262 Jy/beam
! Clean residual mean=-0.000196 rms=0.020655 Jy/beam
! Combined flux in latest and established models = 1.54658 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 31 components and 1.54658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.601533Jy  sigma=0.003184
! Fit after  self-cal, rms=0.597679Jy  sigma=0.003160
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8578 x 1.901 at -14.86 degrees (North through East)
! Clean map  min=-0.077645  max=1.0973 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.99177
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.29     FD        1.02     HN        0.95     KP        1.00     
!   LA        0.95     MK        0.99     NL        0.97     OV        1.00     
!   PT        1.01     SC        0.92     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.999542
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.29     FD        1.01     HN        0.91     KP        1.00     
!   LA        0.92     MK        0.94     NL        0.96     OV        1.04     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00382
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.31     FD        0.93     HN        0.94     KP        0.97     
!   LA        0.93     MK        0.97     NL        0.96     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00315
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.35     FD        0.89     HN        0.95     KP        0.96     
!   LA        0.93     MK        0.95     NL        0.96     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.597679Jy  sigma=0.003160
! Fit after  self-cal, rms=0.604795Jy  sigma=0.003058
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.604795Jy  sigma=0.003058
! Fit after  self-cal, rms=0.604809Jy  sigma=0.003058
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8397 mas, bmaj=1.906 mas, bpa=-15.51 degrees
! Estimated noise=837.513 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0034977 Jy
! Component: 100  -  total flux cleaned = 0.00717845 Jy
! Component: 150  -  total flux cleaned = 0.0103928 Jy
! Component: 200  -  total flux cleaned = 0.0132495 Jy
! Total flux subtracted in 200 components = 0.0132495 Jy
! Clean residual min=-0.068632 max=0.049558 Jy/beam
! Clean residual mean=-0.000080 rms=0.015048 Jy/beam
! Combined flux in latest and established models = 1.55983 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 44 components and 1.55983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.596647Jy  sigma=0.003014
! Fit after  self-cal, rms=0.596495Jy  sigma=0.003013
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.596495Jy  sigma=0.003013
! Fit after  self-cal, rms=0.526741Jy  sigma=0.002563
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0299774 Jy
! Component: 100  -  total flux cleaned = 0.035081 Jy
! Component: 150  -  total flux cleaned = 0.0373152 Jy
! Component: 200  -  total flux cleaned = 0.0383414 Jy
! Total flux subtracted in 200 components = 0.0383414 Jy
! Clean residual min=-0.061838 max=0.049548 Jy/beam
! Clean residual mean=-0.000071 rms=0.014736 Jy/beam
! Combined flux in latest and established models = 1.59817 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 52 components and 1.59817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.522047Jy  sigma=0.002535
! Fit after  self-cal, rms=0.507835Jy  sigma=0.002445
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8397 x 1.906 at -15.51 degrees (North through East)
! Clean map  min=-0.055536  max=1.0644 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.507835Jy  sigma=0.002445
! Fit after  self-cal, rms=15.217909Jy  sigma=0.001905
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=15.217909Jy  sigma=0.001905
! Fit after  self-cal, rms=15.217874Jy  sigma=0.001866
! Inverting map and beam 
! Estimated beam: bmin=0.848 mas, bmaj=2.401 mas, bpa=-7.116 degrees
! Estimated noise=864.52 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0109255 Jy
! Component: 100  -  total flux cleaned = -0.0149456 Jy
! Component: 150  -  total flux cleaned = -0.0172568 Jy
! Component: 200  -  total flux cleaned = -0.0182681 Jy
! Total flux subtracted in 200 components = -0.0182681 Jy
! Clean residual min=-0.038235 max=0.028321 Jy/beam
! Clean residual mean=-0.000002 rms=0.007616 Jy/beam
! Combined flux in latest and established models = 1.5799 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 69 components and 1.5799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=15.217444Jy  sigma=0.001829
! Fit after  self-cal, rms=15.217390Jy  sigma=0.001807
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=15.217390Jy  sigma=0.001807
! Fit after  self-cal, rms=21.648279Jy  sigma=0.001719
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=21.648279Jy  sigma=0.001719
! Fit after  self-cal, rms=21.648529Jy  sigma=0.001708
! Inverting map and beam 
! Estimated beam: bmin=0.8469 mas, bmaj=2.4 mas, bpa=-6.85 degrees
! Estimated noise=862.765 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00827279 Jy
! Component: 100  -  total flux cleaned = -0.0113543 Jy
! Component: 150  -  total flux cleaned = -0.0141108 Jy
! Component: 200  -  total flux cleaned = -0.0149537 Jy
! Total flux subtracted in 200 components = -0.0149537 Jy
! Clean residual min=-0.034977 max=0.025439 Jy/beam
! Clean residual mean=0.000026 rms=0.006470 Jy/beam
! Combined flux in latest and established models = 1.56495 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 78 components and 1.56495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=21.648516Jy  sigma=0.001682
! Fit after  self-cal, rms=21.648565Jy  sigma=0.001671
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.081 mas, bmaj=4.72 mas, bpa=-5.208 degrees
! Estimated noise=1137.99 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00643515 Jy
! Component: 100  -  total flux cleaned = -0.0057035 Jy
! Component: 150  -  total flux cleaned = -0.00541775 Jy
! Component: 200  -  total flux cleaned = -0.00543818 Jy
! Total flux subtracted in 200 components = -0.00543818 Jy
! Clean residual min=-0.029077 max=0.024814 Jy/beam
! Clean residual mean=0.000136 rms=0.007394 Jy/beam
! Combined flux in latest and established models = 1.55951 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 85 components and 1.55951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=21.648540Jy  sigma=0.001665
! Fit after  self-cal, rms=21.648647Jy  sigma=0.001657
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7091 mas, bmaj=1.991 mas, bpa=-7.234 degrees
! Estimated noise=1757.95 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.11267 Jy
! Component: 100  -  total flux cleaned = 1.31177 Jy
! Component: 150  -  total flux cleaned = 1.39989 Jy
! Component: 200  -  total flux cleaned = 1.4544 Jy
! Total flux subtracted in 200 components = 1.4544 Jy
! Clean residual min=-0.025904 max=0.024594 Jy/beam
! Clean residual mean=0.000047 rms=0.006214 Jy/beam
! Combined flux in latest and established models = 1.4544 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 1.4544 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8469 mas, bmaj=2.4 mas, bpa=-6.85 degrees
! Estimated noise=862.765 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, 2.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0432815 Jy
! Component: 100  -  total flux cleaned = 0.0682283 Jy
! Component: 150  -  total flux cleaned = 0.0829097 Jy
! Component: 200  -  total flux cleaned = 0.0885297 Jy
! Total flux subtracted in 200 components = 0.0885297 Jy
! Clean residual min=-0.019872 max=0.013711 Jy/beam
! Clean residual mean=0.000052 rms=0.003801 Jy/beam
! Combined flux in latest and established models = 1.54293 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 54 components and 1.54293 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.081 mas, bmaj=4.72 mas, bpa=-5.208 degrees
! Estimated noise=1137.99 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121679 Jy
! Component: 100  -  total flux cleaned = 0.0138335 Jy
! Component: 150  -  total flux cleaned = 0.0140441 Jy
! Component: 200  -  total flux cleaned = 0.0142412 Jy
! Total flux subtracted in 200 components = 0.0142412 Jy
! Clean residual min=-0.022273 max=0.018690 Jy/beam
! Clean residual mean=0.000132 rms=0.006063 Jy/beam
! Combined flux in latest and established models = 1.55717 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 74 components and 1.55717 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8469 mas, bmaj=2.4 mas, bpa=-6.85 degrees
! Estimated noise=862.765 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00146999 Jy
! Component: 100  -  total flux cleaned = -0.0011688 Jy
! Component: 150  -  total flux cleaned = -0.00118342 Jy
! Component: 200  -  total flux cleaned = -0.000957109 Jy
! Total flux subtracted in 200 components = -0.000957109 Jy
! Clean residual min=-0.018464 max=0.012489 Jy/beam
! Clean residual mean=0.000054 rms=0.003534 Jy/beam
! Combined flux in latest and established models = 1.55622 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 92 components and 1.55622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=21.652878Jy  sigma=0.001621
! Fit after  self-cal, rms=21.649475Jy  sigma=0.001612
wmodel J1625-2527_X_1997_08_27_yyk\_map.mod
! Writing 92 model components to file: J1625-2527_X_1997_08_27_yyk_map.mod
wobs J1625-2527_X_1997_08_27_yyk\_uvs.fits
! Writing UV FITS file: J1625-2527_X_1997_08_27_yyk_uvs.fits
wwins J1625-2527_X_1997_08_27_yyk\_map.win
! wwins: Wrote 3 windows to J1625-2527_X_1997_08_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00226017 Jy
! Component: 100  -  total flux cleaned = -0.00285867 Jy
! Component: 150  -  total flux cleaned = -0.00233526 Jy
! Component: 200  -  total flux cleaned = -0.0016672 Jy
! Component: 250  -  total flux cleaned = -0.0013483 Jy
! Component: 300  -  total flux cleaned = -0.000888597 Jy
! Component: 350  -  total flux cleaned = -0.000598091 Jy
! Component: 400  -  total flux cleaned = 0.000512862 Jy
! Component: 450  -  total flux cleaned = 0.00118231 Jy
! Component: 500  -  total flux cleaned = 0.00208973 Jy
! Component: 550  -  total flux cleaned = 0.00272048 Jy
! Component: 600  -  total flux cleaned = 0.00394206 Jy
! Component: 650  -  total flux cleaned = 0.00441439 Jy
! Component: 700  -  total flux cleaned = 0.00499317 Jy
! Component: 750  -  total flux cleaned = 0.00521954 Jy
! Component: 800  -  total flux cleaned = 0.00576885 Jy
! Component: 850  -  total flux cleaned = 0.00640798 Jy
! Component: 900  -  total flux cleaned = 0.0066153 Jy
! Component: 950  -  total flux cleaned = 0.00712142 Jy
! Component: 1000  -  total flux cleaned = 0.00702247 Jy
! Component: 1050  -  total flux cleaned = 0.00721907 Jy
! Component: 1100  -  total flux cleaned = 0.00750591 Jy
! Component: 1150  -  total flux cleaned = 0.00778533 Jy
! Component: 1200  -  total flux cleaned = 0.0080562 Jy
! Component: 1250  -  total flux cleaned = 0.00814481 Jy
! Component: 1300  -  total flux cleaned = 0.00823141 Jy
! Component: 1350  -  total flux cleaned = 0.00865732 Jy
! Component: 1400  -  total flux cleaned = 0.0087395 Jy
! Component: 1450  -  total flux cleaned = 0.00890443 Jy
! Component: 1500  -  total flux cleaned = 0.00898577 Jy
! Component: 1550  -  total flux cleaned = 0.0090645 Jy
! Component: 1600  -  total flux cleaned = 0.00883411 Jy
! Component: 1650  -  total flux cleaned = 0.00860921 Jy
! Component: 1700  -  total flux cleaned = 0.00861157 Jy
! Component: 1750  -  total flux cleaned = 0.00875815 Jy
! Component: 1800  -  total flux cleaned = 0.00840015 Jy
! Component: 1850  -  total flux cleaned = 0.00826092 Jy
! Component: 1900  -  total flux cleaned = 0.00798556 Jy
! Component: 1950  -  total flux cleaned = 0.00778219 Jy
! Component: 2000  -  total flux cleaned = 0.00744897 Jy
! Total flux subtracted in 2048 components = 0.00751483 Jy
! Clean residual min=-0.003795 max=0.003547 Jy/beam
! Clean residual mean=0.000015 rms=0.001362 Jy/beam
! Combined flux in latest and established models = 1.56373 Jy
keep
! Adding 168 model components to the UV plane model.
! The established model now contains 260 components and 1.56373 Jy
![Exited script file: muppet]
wmap "J1625-2527_X_1997_08_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8469 x 2.4 at -6.85 degrees (North through East)
! Clean map  min=-0.01165  max=1.2881 Jy/beam
! Writing clean map to FITS file: J1625-2527_X_1997_08_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.28806 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00136707 
device "J1625-2527_X_1997_08_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J1625-2527_X_1997_08_27_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.318402 0.318402 0.636805 1.27361 2.54722 5.09444 10.1889 20.3778 40.7555 81.511
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0041 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.288 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8469 x 2.4 at -6.85 degrees (North through East)
! Clean map  min=-0.01165  max=1.2881 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1625-2527_X_1997_08_27_yyk\_map.gif/gif"
! Attempting to open device: 'J1625-2527_X_1997_08_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1625-2527_X_1997_08_27_yyk_uvs.log closed on Mon Jan  8 07:00:57 2007