! Started logfile: J1625-2527_X_1997_05_07_yyk_uvs.log on Mon Jan  8 07:00:28 2007
obs J1625-2527_X_1997_05_07_yyk_uva.fits
! Reading UV FITS file: J1625-2527_X_1997_05_07_yyk_uva.fits
! AN table 1: 54 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.777778 visibilities/baseline/integration-bin.
! Found source: J1625-2527
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 613 lines of history.
! 
! Reading 7560 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1625-2527_X_1997_05_07_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.939094 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6622 mas, bmaj=1.899 mas, bpa=-0.639 degrees
! Estimated noise=2159.17 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.723855 Jy
! Component: 100  -  total flux cleaned = 0.898887 Jy
! Total flux subtracted in 100 components = 0.898887 Jy
! Clean residual min=-0.031400 max=0.065002 Jy/beam
! Clean residual mean=-0.000563 rms=0.010991 Jy/beam
! Combined flux in latest and established models = 0.898887 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.898887 Jy
! 
! Correcting IF 1.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.262597Jy  sigma=0.001656
! Fit after  self-cal, rms=0.261192Jy  sigma=0.001650
! Inverting map and beam 
! Estimated beam: bmin=0.6622 mas, bmaj=1.899 mas, bpa=-0.639 degrees
! Estimated noise=2158.83 mJy/beam.
! Added new window around map position (-0.6, 0.4).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0853107 Jy
! Component: 100  -  total flux cleaned = 0.131822 Jy
! Total flux subtracted in 100 components = 0.131822 Jy
! Clean residual min=-0.018474 max=0.030648 Jy/beam
! Clean residual mean=-0.000262 rms=0.005810 Jy/beam
! Combined flux in latest and established models = 1.03071 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 26 components and 1.03071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.231538Jy  sigma=0.001406
! Fit after  self-cal, rms=0.231200Jy  sigma=0.001404
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8427 mas, bmaj=2.236 mas, bpa=-0.4726 degrees
! Estimated noise=1244.87 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0482837 Jy
! Component: 100  -  total flux cleaned = 0.0698688 Jy
! Component: 150  -  total flux cleaned = 0.0799762 Jy
! Component: 200  -  total flux cleaned = 0.0828959 Jy
! Total flux subtracted in 200 components = 0.0828959 Jy
! Clean residual min=-0.016350 max=0.016562 Jy/beam
! Clean residual mean=-0.000101 rms=0.004312 Jy/beam
! Combined flux in latest and established models = 1.11361 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 37 components and 1.11361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.226190Jy  sigma=0.001357
! Fit after  self-cal, rms=0.226067Jy  sigma=0.001355
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8427 x 2.236 at -0.4726 degrees (North through East)
! Clean map  min=-0.015049  max=0.86567 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.990112
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.05     KP        1.02     
!   LA        1.02     MK        1.03     NL        1.03     OV        1.01     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.993735
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.07     KP        1.01     
!   LA        1.00     MK        1.00     NL        1.04     OV        1.05     
!   PT        0.90     SC        1.00     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.987006
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.11     KP        1.00     
!   LA        1.01     MK        1.00     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.989172
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.14     KP        0.99     
!   LA        1.00     MK        0.97     NL        1.03     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.226067Jy  sigma=0.001355
! Fit after  self-cal, rms=0.222412Jy  sigma=0.001334
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222412Jy  sigma=0.001334
! Fit after  self-cal, rms=0.222416Jy  sigma=0.001334
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8426 mas, bmaj=2.232 mas, bpa=-0.3948 degrees
! Estimated noise=1219.75 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0172647 Jy
! Component: 100  -  total flux cleaned = -0.0215914 Jy
! Component: 150  -  total flux cleaned = -0.0223275 Jy
! Component: 200  -  total flux cleaned = -0.0229105 Jy
! Total flux subtracted in 200 components = -0.0229105 Jy
! Clean residual min=-0.006914 max=0.009566 Jy/beam
! Clean residual mean=-0.000001 rms=0.001787 Jy/beam
! Combined flux in latest and established models = 1.09069 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 48 components and 1.09069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.221529Jy  sigma=0.001327
! Fit after  self-cal, rms=0.221483Jy  sigma=0.001327
! Inverting map 
! Added new window around map position (-2.6, 3.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00944397 Jy
! Component: 100  -  total flux cleaned = 0.00905524 Jy
! Component: 150  -  total flux cleaned = 0.0088949 Jy
! Component: 200  -  total flux cleaned = 0.00902472 Jy
! Total flux subtracted in 200 components = 0.00902472 Jy
! Clean residual min=-0.005736 max=0.006453 Jy/beam
! Clean residual mean=0.000012 rms=0.001403 Jy/beam
! Combined flux in latest and established models = 1.09972 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 63 components and 1.09972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.220983Jy  sigma=0.001325
! Fit after  self-cal, rms=0.220957Jy  sigma=0.001325
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.220957Jy  sigma=0.001325
! Fit after  self-cal, rms=0.209598Jy  sigma=0.001256
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.2, -5.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00592233 Jy
! Component: 100  -  total flux cleaned = 0.00765151 Jy
! Component: 150  -  total flux cleaned = 0.00796166 Jy
! Component: 200  -  total flux cleaned = 0.00809417 Jy
! Total flux subtracted in 200 components = 0.00809417 Jy
! Clean residual min=-0.005405 max=0.004982 Jy/beam
! Clean residual mean=0.000022 rms=0.001230 Jy/beam
! Combined flux in latest and established models = 1.10781 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 76 components and 1.10781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.209219Jy  sigma=0.001254
! Fit after  self-cal, rms=0.205966Jy  sigma=0.001235
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8426 x 2.232 at -0.3948 degrees (North through East)
! Clean map  min=-0.0050384  max=0.8567 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205966Jy  sigma=0.001235
! Fit after  self-cal, rms=0.205045Jy  sigma=0.001234
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205045Jy  sigma=0.001234
! Fit after  self-cal, rms=0.203778Jy  sigma=0.001227
! Inverting map and beam 
! Estimated beam: bmin=0.8402 mas, bmaj=2.224 mas, bpa=-0.2016 degrees
! Estimated noise=1216.19 mJy/beam.
! Added new window around map position (24.4, -6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00319508 Jy
! Component: 100  -  total flux cleaned = 0.00333903 Jy
! Component: 150  -  total flux cleaned = 0.0033442 Jy
! Component: 200  -  total flux cleaned = 0.00334039 Jy
! Total flux subtracted in 200 components = 0.00334039 Jy
! Clean residual min=-0.004477 max=0.003881 Jy/beam
! Clean residual mean=0.000027 rms=0.001090 Jy/beam
! Combined flux in latest and established models = 1.11115 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 94 components and 1.11115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203587Jy  sigma=0.001226
! Fit after  self-cal, rms=0.202914Jy  sigma=0.001223
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.202914Jy  sigma=0.001223
! Fit after  self-cal, rms=0.202370Jy  sigma=0.001221
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.202370Jy  sigma=0.001221
! Fit after  self-cal, rms=0.202012Jy  sigma=0.001219
! Inverting map and beam 
! Estimated beam: bmin=0.8398 mas, bmaj=2.222 mas, bpa=-0.1537 degrees
! Estimated noise=1215.65 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.63614e-06 Jy
! Component: 100  -  total flux cleaned = -0.000172879 Jy
! Component: 150  -  total flux cleaned = -0.000341019 Jy
! Component: 200  -  total flux cleaned = -0.000581158 Jy
! Total flux subtracted in 200 components = -0.000581158 Jy
! Clean residual min=-0.004407 max=0.003860 Jy/beam
! Clean residual mean=0.000021 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 1.11057 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 109 components and 1.11057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201937Jy  sigma=0.001219
! Fit after  self-cal, rms=0.201706Jy  sigma=0.001218
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.568 mas, bmaj=6.528 mas, bpa=8.934 degrees
! Estimated noise=1575.01 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000629861 Jy
! Component: 100  -  total flux cleaned = -0.0014559 Jy
! Component: 150  -  total flux cleaned = -0.00218611 Jy
! Component: 200  -  total flux cleaned = -0.00267428 Jy
! Total flux subtracted in 200 components = -0.00267428 Jy
! Clean residual min=-0.004009 max=0.003900 Jy/beam
! Clean residual mean=0.000041 rms=0.001260 Jy/beam
! Combined flux in latest and established models = 1.1079 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 119 components and 1.1079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201705Jy  sigma=0.001218
! Fit after  self-cal, rms=0.201550Jy  sigma=0.001217
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6617 mas, bmaj=1.891 mas, bpa=-0.3942 degrees
! Estimated noise=2132.29 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.719781 Jy
! Component: 100  -  total flux cleaned = 0.89641 Jy
! Component: 150  -  total flux cleaned = 0.976661 Jy
! Component: 200  -  total flux cleaned = 1.01626 Jy
! Total flux subtracted in 200 components = 1.01626 Jy
! Clean residual min=-0.012467 max=0.016409 Jy/beam
! Clean residual mean=-0.000163 rms=0.003776 Jy/beam
! Combined flux in latest and established models = 1.01626 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 1.01626 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8398 mas, bmaj=2.222 mas, bpa=-0.1537 degrees
! Estimated noise=1215.65 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0390777 Jy
! Component: 100  -  total flux cleaned = 0.0581293 Jy
! Component: 150  -  total flux cleaned = 0.0687916 Jy
! Component: 200  -  total flux cleaned = 0.0761244 Jy
! Total flux subtracted in 200 components = 0.0761243 Jy
! Clean residual min=-0.005567 max=0.006001 Jy/beam
! Clean residual mean=-0.000012 rms=0.001473 Jy/beam
! Combined flux in latest and established models = 1.09238 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 74 components and 1.09238 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.568 mas, bmaj=6.528 mas, bpa=8.934 degrees
! Estimated noise=1575.01 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00759792 Jy
! Component: 100  -  total flux cleaned = 0.00990589 Jy
! Component: 150  -  total flux cleaned = 0.0109551 Jy
! Component: 200  -  total flux cleaned = 0.0118943 Jy
! Total flux subtracted in 200 components = 0.0118943 Jy
! Clean residual min=-0.004603 max=0.003991 Jy/beam
! Clean residual mean=0.000023 rms=0.001335 Jy/beam
! Combined flux in latest and established models = 1.10428 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 101 components and 1.10428 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8398 mas, bmaj=2.222 mas, bpa=-0.1537 degrees
! Estimated noise=1215.65 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000507716 Jy
! Component: 100  -  total flux cleaned = 0.000235431 Jy
! Component: 150  -  total flux cleaned = -3.15707e-06 Jy
! Component: 200  -  total flux cleaned = -0.000230365 Jy
! Total flux subtracted in 200 components = -0.000230365 Jy
! Clean residual min=-0.004622 max=0.004079 Jy/beam
! Clean residual mean=0.000008 rms=0.001078 Jy/beam
! Combined flux in latest and established models = 1.10405 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 127 components and 1.10405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201695Jy  sigma=0.001218
! Fit after  self-cal, rms=0.201566Jy  sigma=0.001217
wmodel J1625-2527_X_1997_05_07_yyk\_map.mod
! Writing 127 model components to file: J1625-2527_X_1997_05_07_yyk_map.mod
wobs J1625-2527_X_1997_05_07_yyk\_uvs.fits
! Writing UV FITS file: J1625-2527_X_1997_05_07_yyk_uvs.fits
wwins J1625-2527_X_1997_05_07_yyk\_map.win
! wwins: Wrote 5 windows to J1625-2527_X_1997_05_07_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00061264 Jy
! Component: 100  -  total flux cleaned = 0.000397541 Jy
! Component: 150  -  total flux cleaned = 0.000961814 Jy
! Component: 200  -  total flux cleaned = 0.00137211 Jy
! Component: 250  -  total flux cleaned = 0.00175842 Jy
! Component: 300  -  total flux cleaned = 0.00207248 Jy
! Component: 350  -  total flux cleaned = 0.00247547 Jy
! Component: 400  -  total flux cleaned = 0.00296019 Jy
! Component: 450  -  total flux cleaned = 0.00351899 Jy
! Component: 500  -  total flux cleaned = 0.00405786 Jy
! Component: 550  -  total flux cleaned = 0.00453566 Jy
! Component: 600  -  total flux cleaned = 0.00491655 Jy
! Component: 650  -  total flux cleaned = 0.00520608 Jy
! Component: 700  -  total flux cleaned = 0.00544755 Jy
! Component: 750  -  total flux cleaned = 0.0055663 Jy
! Component: 800  -  total flux cleaned = 0.0056822 Jy
! Component: 850  -  total flux cleaned = 0.00583342 Jy
! Component: 900  -  total flux cleaned = 0.00601844 Jy
! Component: 950  -  total flux cleaned = 0.00594527 Jy
! Component: 1000  -  total flux cleaned = 0.00598168 Jy
! Component: 1050  -  total flux cleaned = 0.00608793 Jy
! Component: 1100  -  total flux cleaned = 0.00615723 Jy
! Component: 1150  -  total flux cleaned = 0.0062256 Jy
! Component: 1200  -  total flux cleaned = 0.00636121 Jy
! Component: 1250  -  total flux cleaned = 0.00646127 Jy
! Component: 1300  -  total flux cleaned = 0.00649434 Jy
! Component: 1350  -  total flux cleaned = 0.00655903 Jy
! Component: 1400  -  total flux cleaned = 0.00646206 Jy
! Component: 1450  -  total flux cleaned = 0.00633453 Jy
! Component: 1500  -  total flux cleaned = 0.00620833 Jy
! Component: 1550  -  total flux cleaned = 0.0061772 Jy
! Component: 1600  -  total flux cleaned = 0.00602231 Jy
! Component: 1650  -  total flux cleaned = 0.00589958 Jy
! Component: 1700  -  total flux cleaned = 0.00580809 Jy
! Component: 1750  -  total flux cleaned = 0.00565678 Jy
! Component: 1800  -  total flux cleaned = 0.00556661 Jy
! Component: 1850  -  total flux cleaned = 0.00541746 Jy
! Component: 1900  -  total flux cleaned = 0.00526927 Jy
! Component: 1950  -  total flux cleaned = 0.00512201 Jy
! Component: 2000  -  total flux cleaned = 0.00497569 Jy
! Total flux subtracted in 2048 components = 0.00483033 Jy
! Clean residual min=-0.001721 max=0.001642 Jy/beam
! Clean residual mean=0.000002 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 1.10888 Jy
keep
! Adding 108 model components to the UV plane model.
! The established model now contains 235 components and 1.10888 Jy
![Exited script file: muppet]
wmap "J1625-2527_X_1997_05_07_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8398 x 2.222 at -0.1537 degrees (North through East)
! Clean map  min=-0.0037264  max=0.86576 Jy/beam
! Writing clean map to FITS file: J1625-2527_X_1997_05_07_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.865762 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00051169 
device "J1625-2527_X_1997_05_07_yyk\_map.eps/VPS"
! Attempting to open device: 'J1625-2527_X_1997_05_07_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.177309 0.177309 0.354617 0.709234 1.41847 2.83694 5.67387 11.3477 22.6955 45.391 90.782
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.865 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8398 x 2.222 at -0.1537 degrees (North through East)
! Clean map  min=-0.0037264  max=0.86576 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1625-2527_X_1997_05_07_yyk\_map.gif/gif"
! Attempting to open device: 'J1625-2527_X_1997_05_07_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1625-2527_X_1997_05_07_yyk_uvs.log closed on Mon Jan  8 07:00:36 2007