! Started logfile: J1625-2527_X_1996_08_10_yyk_uvs.log on Mon Jan  8 07:00:16 2007
obs J1625-2527_X_1996_08_10_yyk_uva.fits
! Reading UV FITS file: J1625-2527_X_1996_08_10_yyk_uva.fits
! AN table 1: 53 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.469602 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1625-2527
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15049e+09        8e+06          1        8e+06
!  02        2  8.23424e+09        8e+06          1        8e+06
!  03        3  8.41424e+09        8e+06          1        8e+06
!  04        4  8.55424e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 633 lines of history.
! 
! Reading 4480 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1625-2527_X_1996_08_10_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.87789 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6514 mas, bmaj=1.788 mas, bpa=-3.903 degrees
! Estimated noise=3539.28 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.45629 Jy
! Component: 100  -  total flux cleaned = 1.80467 Jy
! Total flux subtracted in 100 components = 1.80467 Jy
! Clean residual min=-0.115715 max=0.173204 Jy/beam
! Clean residual mean=-0.000788 rms=0.038251 Jy/beam
! Combined flux in latest and established models = 1.80467 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.80467 Jy
! 
! Correcting IF 1.
!  A total of 166 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 166 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 166 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 166 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.521252Jy  sigma=0.002847
! Fit after  self-cal, rms=0.423776Jy  sigma=0.002228
! Inverting map and beam 
! Estimated beam: bmin=0.6514 mas, bmaj=1.788 mas, bpa=-3.903 degrees
! Estimated noise=3539.28 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.757 mas, bmaj=2.408 mas, bpa=-12.31 degrees
! Estimated noise=1977.55 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.195299 Jy
! Component: 100  -  total flux cleaned = 0.259142 Jy
! Component: 150  -  total flux cleaned = 0.284197 Jy
! Component: 200  -  total flux cleaned = 0.291842 Jy
! Total flux subtracted in 200 components = 0.291842 Jy
! Clean residual min=-0.026696 max=0.029435 Jy/beam
! Clean residual mean=-0.000229 rms=0.007067 Jy/beam
! Combined flux in latest and established models = 2.09651 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 34 components and 2.09651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.364427Jy  sigma=0.001892
! Fit after  self-cal, rms=0.364260Jy  sigma=0.001890
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.757 x 2.408 at -12.31 degrees (North through East)
! Clean map  min=-0.025024  max=1.7831 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00626
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        1.00*    
!   LA        1.00     MK        0.99     NL        1.03     OV        0.97     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00645
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        1.00*    
!   LA        0.98     MK        0.98     NL        0.99     OV        1.03     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.994418
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.00*    
!   LA        1.00     MK        1.03     NL        1.00     OV        1.01     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.988116
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.05     KP        1.00*    
!   LA        1.01     MK        1.01     NL        1.04     OV        1.00     
!   PT        0.97     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.364260Jy  sigma=0.001890
! Fit after  self-cal, rms=0.363316Jy  sigma=0.001874
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.363316Jy  sigma=0.001874
! Fit after  self-cal, rms=0.363320Jy  sigma=0.001874
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7621 mas, bmaj=2.421 mas, bpa=-12.44 degrees
! Estimated noise=1979.21 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00181402 Jy
! Component: 100  -  total flux cleaned = -0.00313722 Jy
! Component: 150  -  total flux cleaned = -0.00313169 Jy
! Component: 200  -  total flux cleaned = -0.00311305 Jy
! Total flux subtracted in 200 components = -0.00311305 Jy
! Clean residual min=-0.019771 max=0.021109 Jy/beam
! Clean residual mean=-0.000078 rms=0.005743 Jy/beam
! Combined flux in latest and established models = 2.0934 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 38 components and 2.0934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.362968Jy  sigma=0.001872
! Fit after  self-cal, rms=0.362928Jy  sigma=0.001872
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.362928Jy  sigma=0.001872
! Fit after  self-cal, rms=0.301666Jy  sigma=0.001526
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102729 Jy
! Component: 100  -  total flux cleaned = 0.0107221 Jy
! Component: 150  -  total flux cleaned = 0.0104492 Jy
! Component: 200  -  total flux cleaned = 0.0101029 Jy
! Total flux subtracted in 200 components = 0.0101029 Jy
! Clean residual min=-0.015143 max=0.019034 Jy/beam
! Clean residual mean=-0.000049 rms=0.003884 Jy/beam
! Combined flux in latest and established models = 2.1035 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 43 components and 2.1035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.301196Jy  sigma=0.001523
! Fit after  self-cal, rms=0.286172Jy  sigma=0.001440
! Inverting map 
! Added new window around map position (-1.6, 2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198956 Jy
! Component: 100  -  total flux cleaned = 0.0257699 Jy
! Component: 150  -  total flux cleaned = 0.0269112 Jy
! Component: 200  -  total flux cleaned = 0.0274019 Jy
! Total flux subtracted in 200 components = 0.0274019 Jy
! Clean residual min=-0.012981 max=0.012346 Jy/beam
! Clean residual mean=0.000022 rms=0.003085 Jy/beam
! Combined flux in latest and established models = 2.1309 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 59 components and 2.1309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.285050Jy  sigma=0.001434
! Fit after  self-cal, rms=0.279154Jy  sigma=0.001401
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7621 x 2.421 at -12.44 degrees (North through East)
! Clean map  min=-0.012235  max=1.7961 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.279154Jy  sigma=0.001401
! Fit after  self-cal, rms=0.276708Jy  sigma=0.001392
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.276708Jy  sigma=0.001392
! Fit after  self-cal, rms=0.273846Jy  sigma=0.001375
! Inverting map and beam 
! Estimated beam: bmin=0.7607 mas, bmaj=2.412 mas, bpa=-12.39 degrees
! Estimated noise=1974.61 mJy/beam.
! Added new window around map position (-7.2, 23.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123069 Jy
! Component: 100  -  total flux cleaned = 0.0169326 Jy
! Component: 150  -  total flux cleaned = 0.0178241 Jy
! Component: 200  -  total flux cleaned = 0.0184293 Jy
! Total flux subtracted in 200 components = 0.0184293 Jy
! Clean residual min=-0.009330 max=0.007199 Jy/beam
! Clean residual mean=0.000015 rms=0.002026 Jy/beam
! Combined flux in latest and established models = 2.14933 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 83 components and 2.14933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.273391Jy  sigma=0.001373
! Fit after  self-cal, rms=0.271666Jy  sigma=0.001363
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.271666Jy  sigma=0.001363
! Fit after  self-cal, rms=0.271119Jy  sigma=0.001360
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.271119Jy  sigma=0.001360
! Fit after  self-cal, rms=0.269993Jy  sigma=0.001354
! Inverting map and beam 
! Estimated beam: bmin=0.7602 mas, bmaj=2.411 mas, bpa=-12.39 degrees
! Estimated noise=1973.28 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00425463 Jy
! Component: 100  -  total flux cleaned = 0.00508866 Jy
! Component: 150  -  total flux cleaned = 0.00496734 Jy
! Component: 200  -  total flux cleaned = 0.00497228 Jy
! Total flux subtracted in 200 components = 0.00497228 Jy
! Clean residual min=-0.008850 max=0.006651 Jy/beam
! Clean residual mean=0.000002 rms=0.001907 Jy/beam
! Combined flux in latest and established models = 2.1543 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 104 components and 2.1543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.269880Jy  sigma=0.001353
! Fit after  self-cal, rms=0.269063Jy  sigma=0.001348
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.861 mas, bmaj=5.317 mas, bpa=0.5599 degrees
! Estimated noise=2705.75 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0009523 Jy
! Component: 100  -  total flux cleaned = 0.00120054 Jy
! Component: 150  -  total flux cleaned = 0.00119791 Jy
! Component: 200  -  total flux cleaned = 0.00109748 Jy
! Total flux subtracted in 200 components = 0.00109748 Jy
! Clean residual min=-0.009924 max=0.006720 Jy/beam
! Clean residual mean=0.000020 rms=0.002645 Jy/beam
! Combined flux in latest and established models = 2.1554 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 117 components and 2.1554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.269050Jy  sigma=0.001348
! Fit after  self-cal, rms=0.268407Jy  sigma=0.001344
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6536 mas, bmaj=1.789 mas, bpa=-3.907 degrees
! Estimated noise=3532.38 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.50013 Jy
! Component: 100  -  total flux cleaned = 1.82022 Jy
! Component: 150  -  total flux cleaned = 1.96363 Jy
! Component: 200  -  total flux cleaned = 2.03718 Jy
! Total flux subtracted in 200 components = 2.03718 Jy
! Clean residual min=-0.025173 max=0.030375 Jy/beam
! Clean residual mean=-0.000232 rms=0.006645 Jy/beam
! Combined flux in latest and established models = 2.03718 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 2.03718 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7602 mas, bmaj=2.411 mas, bpa=-12.39 degrees
! Estimated noise=1973.28 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0486646 Jy
! Component: 100  -  total flux cleaned = 0.0733335 Jy
! Component: 150  -  total flux cleaned = 0.0895277 Jy
! Component: 200  -  total flux cleaned = 0.100438 Jy
! Total flux subtracted in 200 components = 0.100438 Jy
! Clean residual min=-0.011111 max=0.007845 Jy/beam
! Clean residual mean=-0.000033 rms=0.002308 Jy/beam
! Combined flux in latest and established models = 2.13761 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 55 components and 2.13761 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.861 mas, bmaj=5.317 mas, bpa=0.5599 degrees
! Estimated noise=2705.75 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101098 Jy
! Component: 100  -  total flux cleaned = 0.0134482 Jy
! Component: 150  -  total flux cleaned = 0.0151428 Jy
! Component: 200  -  total flux cleaned = 0.0160899 Jy
! Total flux subtracted in 200 components = 0.0160899 Jy
! Clean residual min=-0.010142 max=0.006437 Jy/beam
! Clean residual mean=0.000019 rms=0.002690 Jy/beam
! Combined flux in latest and established models = 2.1537 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 81 components and 2.1537 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7602 mas, bmaj=2.411 mas, bpa=-12.39 degrees
! Estimated noise=1973.28 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00131139 Jy
! Component: 100  -  total flux cleaned = -0.00129967 Jy
! Component: 150  -  total flux cleaned = -0.00191163 Jy
! Component: 200  -  total flux cleaned = -0.0019003 Jy
! Total flux subtracted in 200 components = -0.0019003 Jy
! Clean residual min=-0.008727 max=0.006265 Jy/beam
! Clean residual mean=-0.000003 rms=0.001894 Jy/beam
! Combined flux in latest and established models = 2.1518 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 99 components and 2.1518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.268589Jy  sigma=0.001345
! Fit after  self-cal, rms=0.268064Jy  sigma=0.001342
wmodel J1625-2527_X_1996_08_10_yyk\_map.mod
! Writing 99 model components to file: J1625-2527_X_1996_08_10_yyk_map.mod
wobs J1625-2527_X_1996_08_10_yyk\_uvs.fits
! Writing UV FITS file: J1625-2527_X_1996_08_10_yyk_uvs.fits
wwins J1625-2527_X_1996_08_10_yyk\_map.win
! wwins: Wrote 3 windows to J1625-2527_X_1996_08_10_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00373405 Jy
! Component: 100  -  total flux cleaned = -0.0066978 Jy
! Component: 150  -  total flux cleaned = -0.00790705 Jy
! Component: 200  -  total flux cleaned = -0.00832175 Jy
! Component: 250  -  total flux cleaned = -0.00842053 Jy
! Component: 300  -  total flux cleaned = -0.00823283 Jy
! Component: 350  -  total flux cleaned = -0.00823499 Jy
! Component: 400  -  total flux cleaned = -0.00831984 Jy
! Component: 450  -  total flux cleaned = -0.00807321 Jy
! Component: 500  -  total flux cleaned = -0.00831137 Jy
! Component: 550  -  total flux cleaned = -0.0083879 Jy
! Component: 600  -  total flux cleaned = -0.00868293 Jy
! Component: 650  -  total flux cleaned = -0.00889741 Jy
! Component: 700  -  total flux cleaned = -0.00903768 Jy
! Component: 750  -  total flux cleaned = -0.00910687 Jy
! Component: 800  -  total flux cleaned = -0.00930738 Jy
! Component: 850  -  total flux cleaned = -0.00943682 Jy
! Component: 900  -  total flux cleaned = -0.00950081 Jy
! Component: 950  -  total flux cleaned = -0.00968739 Jy
! Component: 1000  -  total flux cleaned = -0.00974814 Jy
! Component: 1050  -  total flux cleaned = -0.00998639 Jy
! Component: 1100  -  total flux cleaned = -0.0100444 Jy
! Component: 1150  -  total flux cleaned = -0.0102175 Jy
! Component: 1200  -  total flux cleaned = -0.010444 Jy
! Component: 1250  -  total flux cleaned = -0.0106654 Jy
! Component: 1300  -  total flux cleaned = -0.0109377 Jy
! Component: 1350  -  total flux cleaned = -0.0112585 Jy
! Component: 1400  -  total flux cleaned = -0.0114696 Jy
! Component: 1450  -  total flux cleaned = -0.0118316 Jy
! Component: 1500  -  total flux cleaned = -0.0121866 Jy
! Component: 1550  -  total flux cleaned = -0.0124366 Jy
! Component: 1600  -  total flux cleaned = -0.012733 Jy
! Component: 1650  -  total flux cleaned = -0.0131228 Jy
! Component: 1700  -  total flux cleaned = -0.0134102 Jy
! Component: 1750  -  total flux cleaned = -0.0135524 Jy
! Component: 1800  -  total flux cleaned = -0.0139722 Jy
! Component: 1850  -  total flux cleaned = -0.0141101 Jy
! Component: 1900  -  total flux cleaned = -0.0145637 Jy
! Component: 1950  -  total flux cleaned = -0.0148332 Jy
! Component: 2000  -  total flux cleaned = -0.015232 Jy
! Total flux subtracted in 2048 components = -0.0154075 Jy
! Clean residual min=-0.002447 max=0.002440 Jy/beam
! Clean residual mean=-0.000001 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 2.1364 Jy
keep
! Adding 102 model components to the UV plane model.
! The established model now contains 201 components and 2.13639 Jy
![Exited script file: muppet]
wmap "J1625-2527_X_1996_08_10_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7602 x 2.411 at -12.39 degrees (North through East)
! Clean map  min=-0.0048013  max=1.8017 Jy/beam
! Writing clean map to FITS file: J1625-2527_X_1996_08_10_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.80166 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000757648 
device "J1625-2527_X_1996_08_10_yyk\_map.eps/VPS"
! Attempting to open device: 'J1625-2527_X_1996_08_10_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.126158 0.126158 0.252316 0.504633 1.00927 2.01853 4.03706 8.07412 16.1482 32.2965 64.593
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0022 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.801 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7602 x 2.411 at -12.39 degrees (North through East)
! Clean map  min=-0.0048013  max=1.8017 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1625-2527_X_1996_08_10_yyk\_map.gif/gif"
! Attempting to open device: 'J1625-2527_X_1996_08_10_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1625-2527_X_1996_08_10_yyk_uvs.log closed on Mon Jan  8 07:00:23 2007