! Started logfile: J1625-2527_X_1996_06_07_yyk_uvs.log on Mon Jan 8 07:00:07 2007 obs J1625-2527_X_1996_06_07_yyk_uva.fits ! Reading UV FITS file: J1625-2527_X_1996_06_07_yyk_uva.fits ! AN table 1: 106 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.813417 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 8e+06 1 8e+06 ! 02 2 8.23424e+09 8e+06 1 8e+06 ! 03 3 8.41424e+09 8e+06 1 8e+06 ! 04 4 8.55424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 689 lines of history. ! ! Reading 15520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1625-2527_X_1996_06_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.35602 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.685 mas, bmaj=1.959 mas, bpa=-16.12 degrees ! Estimated noise=2142.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.71306 Jy ! Component: 100 - total flux cleaned = 3.17466 Jy ! Total flux subtracted in 100 components = 3.17466 Jy ! Clean residual min=-0.113786 max=0.134709 Jy/beam ! Clean residual mean=-0.000507 rms=0.027642 Jy/beam ! Combined flux in latest and established models = 3.17466 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 3.17466 Jy ! ! Correcting IF 1. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007045Jy sigma=0.005891 ! Fit after self-cal, rms=1.002201Jy sigma=0.005863 ! Inverting map and beam ! Estimated beam: bmin=0.685 mas, bmaj=1.959 mas, bpa=-16.12 degrees ! Estimated noise=2142.11 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9069 mas, bmaj=2.297 mas, bpa=-11.06 degrees ! Estimated noise=954.203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.25882 Jy ! Component: 100 - total flux cleaned = 0.354782 Jy ! Component: 150 - total flux cleaned = 0.399263 Jy ! Component: 200 - total flux cleaned = 0.416478 Jy ! Total flux subtracted in 200 components = 0.416478 Jy ! Clean residual min=-0.066535 max=0.072343 Jy/beam ! Clean residual mean=-0.000503 rms=0.016884 Jy/beam ! Combined flux in latest and established models = 3.59113 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 3.59113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.974303Jy sigma=0.005602 ! Fit after self-cal, rms=0.974077Jy sigma=0.005601 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9069 x 2.297 at -11.06 degrees (North through East) ! Clean map min=-0.059612 max=3.1812 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.994432 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.02 KP 0.99 ! LA 1.02 MK 1.00 NL 1.03 OV 0.99 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993924 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.03 KP 0.99 ! LA 0.99 MK 1.00 NL 1.01 OV 1.04 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.992237 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 1.02 KP 0.97 ! LA 1.00 MK 1.03 NL 1.02 OV 1.01 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.985935 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.04 KP 0.97 ! LA 1.01 MK 1.01 NL 1.05 OV 1.00 ! PT 0.98 SC 1.02 ! ! ! Fit before self-cal, rms=0.974077Jy sigma=0.005601 ! Fit after self-cal, rms=0.979089Jy sigma=0.005542 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.979089Jy sigma=0.005542 ! Fit after self-cal, rms=0.979108Jy sigma=0.005542 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9135 mas, bmaj=2.319 mas, bpa=-10.91 degrees ! Estimated noise=940.175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0501506 Jy ! Component: 100 - total flux cleaned = -0.0638973 Jy ! Component: 150 - total flux cleaned = -0.0654693 Jy ! Component: 200 - total flux cleaned = -0.0657317 Jy ! Total flux subtracted in 200 components = -0.0657317 Jy ! Clean residual min=-0.030965 max=0.035067 Jy/beam ! Clean residual mean=-0.000026 rms=0.007817 Jy/beam ! Combined flux in latest and established models = 3.5254 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 3.5254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.977391Jy sigma=0.005531 ! Fit after self-cal, rms=0.977353Jy sigma=0.005531 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.977353Jy sigma=0.005531 ! Fit after self-cal, rms=0.640742Jy sigma=0.003461 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.053217 Jy ! Component: 100 - total flux cleaned = 0.0514792 Jy ! Component: 150 - total flux cleaned = 0.0513879 Jy ! Component: 200 - total flux cleaned = 0.0512481 Jy ! Total flux subtracted in 200 components = 0.0512481 Jy ! Clean residual min=-0.023026 max=0.015598 Jy/beam ! Clean residual mean=0.000182 rms=0.004669 Jy/beam ! Combined flux in latest and established models = 3.57665 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 3.57665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.632392Jy sigma=0.003407 ! Fit after self-cal, rms=0.578477Jy sigma=0.003117 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9135 x 2.319 at -10.91 degrees (North through East) ! Clean map min=-0.024992 max=3.2357 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578477Jy sigma=0.003117 ! Fit after self-cal, rms=0.565031Jy sigma=0.003102 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.565031Jy sigma=0.003102 ! Fit after self-cal, rms=0.540332Jy sigma=0.002968 ! Inverting map and beam ! Estimated beam: bmin=0.912 mas, bmaj=2.307 mas, bpa=-10.6 degrees ! Estimated noise=935.482 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199146 Jy ! Component: 100 - total flux cleaned = -0.00134384 Jy ! Component: 150 - total flux cleaned = -0.0010697 Jy ! Component: 200 - total flux cleaned = -0.00126476 Jy ! Total flux subtracted in 200 components = -0.00126476 Jy ! Clean residual min=-0.012560 max=0.009369 Jy/beam ! Clean residual mean=-0.000022 rms=0.002665 Jy/beam ! Combined flux in latest and established models = 3.57539 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 3.57539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.539990Jy sigma=0.002966 ! Fit after self-cal, rms=0.524605Jy sigma=0.002883 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.524605Jy sigma=0.002883 ! Fit after self-cal, rms=0.524378Jy sigma=0.002868 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.524378Jy sigma=0.002868 ! Fit after self-cal, rms=0.514045Jy sigma=0.002813 ! Inverting map and beam ! Estimated beam: bmin=0.9127 mas, bmaj=2.306 mas, bpa=-10.57 degrees ! Estimated noise=934.727 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100774 Jy ! Component: 100 - total flux cleaned = -0.00169503 Jy ! Component: 150 - total flux cleaned = -0.00188094 Jy ! Component: 200 - total flux cleaned = -0.0022047 Jy ! Total flux subtracted in 200 components = -0.0022047 Jy ! Clean residual min=-0.010757 max=0.009119 Jy/beam ! Clean residual mean=-0.000024 rms=0.002373 Jy/beam ! Combined flux in latest and established models = 3.57318 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 3.57318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513864Jy sigma=0.002812 ! Fit after self-cal, rms=0.505906Jy sigma=0.002771 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=5.347 mas, bpa=-9.19 degrees ! Estimated noise=1220.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187782 Jy ! Component: 100 - total flux cleaned = 0.00190441 Jy ! Component: 150 - total flux cleaned = 0.00210883 Jy ! Component: 200 - total flux cleaned = 0.00228211 Jy ! Total flux subtracted in 200 components = 0.00228211 Jy ! Clean residual min=-0.008140 max=0.007792 Jy/beam ! Clean residual mean=-0.000030 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 3.57546 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 64 components and 3.57546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.505915Jy sigma=0.002770 ! Fit after self-cal, rms=0.499749Jy sigma=0.002739 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6857 mas, bmaj=1.957 mas, bpa=-15.91 degrees ! Estimated noise=2122.72 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.78125 Jy ! Component: 100 - total flux cleaned = 3.22548 Jy ! Component: 150 - total flux cleaned = 3.39268 Jy ! Component: 200 - total flux cleaned = 3.4695 Jy ! Total flux subtracted in 200 components = 3.4695 Jy ! Clean residual min=-0.025585 max=0.034743 Jy/beam ! Clean residual mean=-0.000081 rms=0.007734 Jy/beam ! Combined flux in latest and established models = 3.4695 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 3.4695 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9127 mas, bmaj=2.306 mas, bpa=-10.57 degrees ! Estimated noise=934.727 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0599219 Jy ! Component: 100 - total flux cleaned = 0.0853622 Jy ! Component: 150 - total flux cleaned = 0.0954622 Jy ! Component: 200 - total flux cleaned = 0.0981105 Jy ! Total flux subtracted in 200 components = 0.0981105 Jy ! Clean residual min=-0.009182 max=0.009664 Jy/beam ! Clean residual mean=-0.000035 rms=0.002365 Jy/beam ! Combined flux in latest and established models = 3.56761 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 57 components and 3.56761 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=5.347 mas, bpa=-9.19 degrees ! Estimated noise=1220.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00786432 Jy ! Component: 100 - total flux cleaned = 0.00804258 Jy ! Component: 150 - total flux cleaned = 0.00821465 Jy ! Component: 200 - total flux cleaned = 0.0083793 Jy ! Total flux subtracted in 200 components = 0.0083793 Jy ! Clean residual min=-0.007117 max=0.008325 Jy/beam ! Clean residual mean=-0.000028 rms=0.002289 Jy/beam ! Combined flux in latest and established models = 3.57599 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 3.57599 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9127 mas, bmaj=2.306 mas, bpa=-10.57 degrees ! Estimated noise=934.727 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00400427 Jy ! Component: 100 - total flux cleaned = -0.00375718 Jy ! Component: 150 - total flux cleaned = -0.00355022 Jy ! Component: 200 - total flux cleaned = -0.0035488 Jy ! Total flux subtracted in 200 components = -0.0035488 Jy ! Clean residual min=-0.007994 max=0.009415 Jy/beam ! Clean residual mean=-0.000023 rms=0.002074 Jy/beam ! Combined flux in latest and established models = 3.57244 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 77 components and 3.57244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.499441Jy sigma=0.002738 ! Fit after self-cal, rms=0.494569Jy sigma=0.002713 wmodel J1625-2527_X_1996_06_07_yyk\_map.mod ! Writing 77 model components to file: J1625-2527_X_1996_06_07_yyk_map.mod wobs J1625-2527_X_1996_06_07_yyk\_uvs.fits ! Writing UV FITS file: J1625-2527_X_1996_06_07_yyk_uvs.fits wwins J1625-2527_X_1996_06_07_yyk\_map.win ! wwins: Wrote 2 windows to J1625-2527_X_1996_06_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.60866e-07 Jy ! Component: 100 - total flux cleaned = 4.55527e-06 Jy ! Component: 150 - total flux cleaned = 0.000385841 Jy ! Component: 200 - total flux cleaned = 0.000619752 Jy ! Component: 250 - total flux cleaned = 0.000514748 Jy ! Component: 300 - total flux cleaned = 0.000819939 Jy ! Component: 350 - total flux cleaned = 0.0011084 Jy ! Component: 400 - total flux cleaned = 0.00157195 Jy ! Component: 450 - total flux cleaned = 0.00174788 Jy ! Component: 500 - total flux cleaned = 0.00192008 Jy ! Component: 550 - total flux cleaned = 0.00208422 Jy ! Component: 600 - total flux cleaned = 0.00208296 Jy ! Component: 650 - total flux cleaned = 0.00192976 Jy ! Component: 700 - total flux cleaned = 0.00185512 Jy ! Component: 750 - total flux cleaned = 0.00178267 Jy ! Component: 800 - total flux cleaned = 0.00157144 Jy ! Component: 850 - total flux cleaned = 0.0015043 Jy ! Component: 900 - total flux cleaned = 0.00150318 Jy ! Component: 950 - total flux cleaned = 0.00118096 Jy ! Component: 1000 - total flux cleaned = 0.00118238 Jy ! Component: 1050 - total flux cleaned = 0.00130408 Jy ! Component: 1100 - total flux cleaned = 0.00106353 Jy ! Component: 1150 - total flux cleaned = 0.000888359 Jy ! Component: 1200 - total flux cleaned = 0.000605117 Jy ! Component: 1250 - total flux cleaned = 0.000606113 Jy ! Component: 1300 - total flux cleaned = 0.00033361 Jy ! Component: 1350 - total flux cleaned = 0.000333832 Jy ! Component: 1400 - total flux cleaned = 0.000176267 Jy ! Component: 1450 - total flux cleaned = 0.000125393 Jy ! Component: 1500 - total flux cleaned = -7.35574e-05 Jy ! Component: 1550 - total flux cleaned = -0.000122243 Jy ! Component: 1600 - total flux cleaned = -0.000266218 Jy ! Component: 1650 - total flux cleaned = -0.000265904 Jy ! Component: 1700 - total flux cleaned = -0.000358865 Jy ! Component: 1750 - total flux cleaned = -0.000404643 Jy ! Component: 1800 - total flux cleaned = -0.000494296 Jy ! Component: 1850 - total flux cleaned = -0.000581526 Jy ! Component: 1900 - total flux cleaned = -0.000539137 Jy ! Component: 1950 - total flux cleaned = -0.0007078 Jy ! Component: 2000 - total flux cleaned = -0.000665852 Jy ! Total flux subtracted in 2048 components = -0.000747419 Jy ! Clean residual min=-0.002020 max=0.002029 Jy/beam ! Clean residual mean=-0.000012 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 3.57169 Jy keep ! Adding 116 model components to the UV plane model. ! The established model now contains 193 components and 3.57169 Jy ![Exited script file: muppet] wmap "J1625-2527_X_1996_06_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9127 x 2.306 at -10.57 degrees (North through East) ! Clean map min=-0.01032 max=3.246 Jy/beam ! Writing clean map to FITS file: J1625-2527_X_1996_06_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.24604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000759982 device "J1625-2527_X_1996_06_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1625-2527_X_1996_06_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0702378 0.0702378 0.140476 0.280951 0.561903 1.12381 2.24761 4.49522 8.99044 17.9809 35.9618 71.9235 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.246 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9127 x 2.306 at -10.57 degrees (North through East) ! Clean map min=-0.01032 max=3.246 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1625-2527_X_1996_06_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1625-2527_X_1996_06_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1625-2527_X_1996_06_07_yyk_uvs.log closed on Mon Jan 8 07:00:15 2007