! Started logfile: J1625-2527_S_1997_05_07_yyk_uvs.log on Sun Jan 7 18:58:24 2007 obs J1625-2527_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1625-2527_S_1997_05_07_yyk_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877366 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 8528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1625-2527_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.46795 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=7.4 mas, bpa=0.8694 degrees ! Estimated noise=2986.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.17754 Jy ! Component: 100 - total flux cleaned = 1.39897 Jy ! Total flux subtracted in 100 components = 1.39897 Jy ! Clean residual min=-0.044559 max=0.079410 Jy/beam ! Clean residual mean=0.000900 rms=0.016275 Jy/beam ! Combined flux in latest and established models = 1.39897 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.39897 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.403896Jy sigma=0.001459 ! Fit after self-cal, rms=0.403358Jy sigma=0.001458 ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=7.401 mas, bpa=0.8694 degrees ! Estimated noise=2985.84 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=9.291 mas, bpa=-2.293 degrees ! Estimated noise=1946.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.093611 Jy ! Component: 100 - total flux cleaned = 0.128934 Jy ! Component: 150 - total flux cleaned = 0.132519 Jy ! Component: 200 - total flux cleaned = 0.134121 Jy ! Total flux subtracted in 200 components = 0.134121 Jy ! Clean residual min=-0.038740 max=0.055117 Jy/beam ! Clean residual mean=0.001372 rms=0.015015 Jy/beam ! Combined flux in latest and established models = 1.53309 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 38 components and 1.53309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.384461Jy sigma=0.001390 ! Fit after self-cal, rms=0.384453Jy sigma=0.001390 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.349 x 9.291 at -2.293 degrees (North through East) ! Clean map min=-0.037659 max=1.3718 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02804 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 1.07 KP 0.89 ! LA 0.96 MK 1.00 NL 1.00* OV 1.07 ! PT 0.93 SC 0.82 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.977865 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.12 HN 1.19 KP 0.98 ! LA 1.06 MK 1.05 NL 0.98 OV 1.03 ! PT 0.91 SC 0.90 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03955 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.06 HN 1.04 KP 0.91 ! LA 0.81 MK 0.88 NL 0.92 OV 0.95 ! PT 1.07 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.978338 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.13 HN 1.18 KP 0.96 ! LA 0.89 MK 1.05 NL 1.01 OV 1.08 ! PT 0.90 SC 1.04 ! ! ! Fit before self-cal, rms=0.384453Jy sigma=0.001390 ! Fit after self-cal, rms=0.349664Jy sigma=0.001255 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349664Jy sigma=0.001255 ! Fit after self-cal, rms=0.349664Jy sigma=0.001255 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.368 mas, bmaj=9.082 mas, bpa=-1.571 degrees ! Estimated noise=1946.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00800845 Jy ! Component: 100 - total flux cleaned = 0.00805222 Jy ! Component: 150 - total flux cleaned = 0.00754139 Jy ! Component: 200 - total flux cleaned = 0.00707786 Jy ! Total flux subtracted in 200 components = 0.00707786 Jy ! Clean residual min=-0.012266 max=0.019416 Jy/beam ! Clean residual mean=0.000721 rms=0.004207 Jy/beam ! Combined flux in latest and established models = 1.54016 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 1.54016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348924Jy sigma=0.001253 ! Fit after self-cal, rms=0.348924Jy sigma=0.001253 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348924Jy sigma=0.001253 ! Fit after self-cal, rms=0.346031Jy sigma=0.001243 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, -47). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189501 Jy ! Component: 100 - total flux cleaned = 0.0266329 Jy ! Component: 150 - total flux cleaned = 0.0284446 Jy ! Component: 200 - total flux cleaned = 0.0286376 Jy ! Total flux subtracted in 200 components = 0.0286376 Jy ! Clean residual min=-0.010659 max=0.009753 Jy/beam ! Clean residual mean=0.000563 rms=0.002969 Jy/beam ! Combined flux in latest and established models = 1.5688 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 77 components and 1.5688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345240Jy sigma=0.001240 ! Fit after self-cal, rms=0.344518Jy sigma=0.001237 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.368 x 9.082 at -1.571 degrees (North through East) ! Clean map min=-0.01064 max=1.3847 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344518Jy sigma=0.001237 ! Fit after self-cal, rms=0.332374Jy sigma=0.001195 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332374Jy sigma=0.001195 ! Fit after self-cal, rms=0.332064Jy sigma=0.001194 ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=9.061 mas, bpa=-1.572 degrees ! Estimated noise=1939.72 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430467 Jy ! Component: 100 - total flux cleaned = 0.00486009 Jy ! Component: 150 - total flux cleaned = 0.0050261 Jy ! Component: 200 - total flux cleaned = 0.00534009 Jy ! Total flux subtracted in 200 components = 0.00534009 Jy ! Clean residual min=-0.009793 max=0.008782 Jy/beam ! Clean residual mean=0.000477 rms=0.002613 Jy/beam ! Combined flux in latest and established models = 1.57414 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 1.57414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331822Jy sigma=0.001193 ! Fit after self-cal, rms=0.331663Jy sigma=0.001192 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331663Jy sigma=0.001192 ! Fit after self-cal, rms=0.330883Jy sigma=0.001190 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330883Jy sigma=0.001190 ! Fit after self-cal, rms=0.330802Jy sigma=0.001190 ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=9.049 mas, bpa=-1.573 degrees ! Estimated noise=1937.76 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143694 Jy ! Component: 100 - total flux cleaned = 0.00172268 Jy ! Component: 150 - total flux cleaned = 0.0019841 Jy ! Component: 200 - total flux cleaned = 0.00210907 Jy ! Total flux subtracted in 200 components = 0.00210907 Jy ! Clean residual min=-0.009319 max=0.008650 Jy/beam ! Clean residual mean=0.000455 rms=0.002530 Jy/beam ! Combined flux in latest and established models = 1.57625 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 96 components and 1.57625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330643Jy sigma=0.001189 ! Fit after self-cal, rms=0.330594Jy sigma=0.001189 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.685 mas, bmaj=23.04 mas, bpa=9.371 degrees ! Estimated noise=2393.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383887 Jy ! Component: 100 - total flux cleaned = 0.00450233 Jy ! Component: 150 - total flux cleaned = 0.00479991 Jy ! Component: 200 - total flux cleaned = 0.00515435 Jy ! Total flux subtracted in 200 components = 0.00515435 Jy ! Clean residual min=-0.009393 max=0.008790 Jy/beam ! Clean residual mean=0.000787 rms=0.003275 Jy/beam ! Combined flux in latest and established models = 1.58141 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 104 components and 1.58141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330557Jy sigma=0.001189 ! Fit after self-cal, rms=0.330522Jy sigma=0.001189 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=7.327 mas, bpa=1.479 degrees ! Estimated noise=2984.28 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.17693 Jy ! Component: 100 - total flux cleaned = 1.39536 Jy ! Component: 150 - total flux cleaned = 1.47837 Jy ! Component: 200 - total flux cleaned = 1.51373 Jy ! Total flux subtracted in 200 components = 1.51373 Jy ! Clean residual min=-0.013047 max=0.017417 Jy/beam ! Clean residual mean=0.000392 rms=0.004271 Jy/beam ! Combined flux in latest and established models = 1.51373 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.51373 Jy ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=9.049 mas, bpa=-1.573 degrees ! Estimated noise=1937.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.02324 Jy ! Component: 100 - total flux cleaned = 0.0364863 Jy ! Component: 150 - total flux cleaned = 0.0453171 Jy ! Component: 200 - total flux cleaned = 0.0510096 Jy ! Total flux subtracted in 200 components = 0.0510096 Jy ! Clean residual min=-0.009354 max=0.009561 Jy/beam ! Clean residual mean=0.000552 rms=0.002939 Jy/beam ! Combined flux in latest and established models = 1.56474 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 55 components and 1.56474 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.685 mas, bmaj=23.04 mas, bpa=9.371 degrees ! Estimated noise=2393.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741045 Jy ! Component: 100 - total flux cleaned = 0.00975802 Jy ! Component: 150 - total flux cleaned = 0.0110249 Jy ! Component: 200 - total flux cleaned = 0.0122131 Jy ! Total flux subtracted in 200 components = 0.0122131 Jy ! Clean residual min=-0.010022 max=0.010195 Jy/beam ! Clean residual mean=0.000825 rms=0.003510 Jy/beam ! Combined flux in latest and established models = 1.57695 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 1.57695 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=9.049 mas, bpa=-1.573 degrees ! Estimated noise=1937.76 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00439729 Jy ! Component: 100 - total flux cleaned = -0.00456821 Jy ! Component: 150 - total flux cleaned = -0.00471529 Jy ! Component: 200 - total flux cleaned = -0.00457712 Jy ! Total flux subtracted in 200 components = -0.00457712 Jy ! Clean residual min=-0.008847 max=0.008835 Jy/beam ! Clean residual mean=0.000473 rms=0.002665 Jy/beam ! Combined flux in latest and established models = 1.57238 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 1.57238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330576Jy sigma=0.001189 ! Fit after self-cal, rms=0.330548Jy sigma=0.001189 wmodel J1625-2527_S_1997_05_07_yyk\_map.mod ! Writing 85 model components to file: J1625-2527_S_1997_05_07_yyk_map.mod wobs J1625-2527_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1625-2527_S_1997_05_07_yyk_uvs.fits wwins J1625-2527_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J1625-2527_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0009552 Jy ! Component: 100 - total flux cleaned = 0.00210421 Jy ! Component: 150 - total flux cleaned = 0.00289431 Jy ! Component: 200 - total flux cleaned = 0.00350953 Jy ! Component: 250 - total flux cleaned = 0.00420102 Jy ! Component: 300 - total flux cleaned = 0.00496158 Jy ! Component: 350 - total flux cleaned = 0.00558483 Jy ! Component: 400 - total flux cleaned = 0.00628439 Jy ! Component: 450 - total flux cleaned = 0.00676787 Jy ! Component: 500 - total flux cleaned = 0.00732535 Jy ! Component: 550 - total flux cleaned = 0.00741627 Jy ! Component: 600 - total flux cleaned = 0.00793632 Jy ! Component: 650 - total flux cleaned = 0.00810308 Jy ! Component: 700 - total flux cleaned = 0.00834809 Jy ! Component: 750 - total flux cleaned = 0.00858521 Jy ! Component: 800 - total flux cleaned = 0.00858382 Jy ! Component: 850 - total flux cleaned = 0.00858248 Jy ! Component: 900 - total flux cleaned = 0.00858085 Jy ! Component: 950 - total flux cleaned = 0.00836791 Jy ! Component: 1000 - total flux cleaned = 0.00850655 Jy ! Component: 1050 - total flux cleaned = 0.00843837 Jy ! Component: 1100 - total flux cleaned = 0.00857081 Jy ! Component: 1150 - total flux cleaned = 0.00844116 Jy ! Component: 1200 - total flux cleaned = 0.00856907 Jy ! Component: 1250 - total flux cleaned = 0.00875532 Jy ! Component: 1300 - total flux cleaned = 0.00881647 Jy ! Component: 1350 - total flux cleaned = 0.00911356 Jy ! Component: 1400 - total flux cleaned = 0.0092298 Jy ! Component: 1450 - total flux cleaned = 0.00951467 Jy ! Component: 1500 - total flux cleaned = 0.0095703 Jy ! Component: 1550 - total flux cleaned = 0.00962379 Jy ! Component: 1600 - total flux cleaned = 0.00973138 Jy ! Component: 1650 - total flux cleaned = 0.00973133 Jy ! Component: 1700 - total flux cleaned = 0.00983664 Jy ! Component: 1750 - total flux cleaned = 0.00983739 Jy ! Component: 1800 - total flux cleaned = 0.00983799 Jy ! Component: 1850 - total flux cleaned = 0.00983906 Jy ! Component: 1900 - total flux cleaned = 0.00988883 Jy ! Component: 1950 - total flux cleaned = 0.00978954 Jy ! Component: 2000 - total flux cleaned = 0.00964274 Jy ! Total flux subtracted in 2048 components = 0.00973915 Jy ! Clean residual min=-0.003450 max=0.003401 Jy/beam ! Clean residual mean=0.000080 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 1.58211 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 225 components and 1.58211 Jy ![Exited script file: muppet] wmap "J1625-2527_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.353 x 9.049 at -1.573 degrees (North through East) ! Clean map min=-0.0060283 max=1.3935 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.39351 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000946064 device "J1625-2527_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1625-2527_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.203672 0.203672 0.407344 0.814688 1.62938 3.25875 6.5175 13.035 26.07 52.14 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.393 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.353 x 9.049 at -1.573 degrees (North through East) ! Clean map min=-0.0060283 max=1.3935 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1625-2527_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1625-2527_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1625-2527_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 18:58:30 2007