! Started logfile: J1625-2527_S_1996_06_07_yyk_uvs.log on Sun Jan 7 18:58:12 2007 obs J1625-2527_S_1996_06_07_yyk_uva.fits ! Reading UV FITS file: J1625-2527_S_1996_06_07_yyk_uva.fits ! AN table 1: 106 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.81153 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 8e+06 1 8e+06 ! 02 2 2.23424e+09 8e+06 1 8e+06 ! 03 3 2.29424e+09 8e+06 1 8e+06 ! 04 4 2.32424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 689 lines of history. ! ! Reading 15484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1625-2527_S_1996_06_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.40894 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=7.651 mas, bpa=-17.39 degrees ! Estimated noise=2178.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.75293 Jy ! Component: 100 - total flux cleaned = 3.23493 Jy ! Total flux subtracted in 100 components = 3.23493 Jy ! Clean residual min=-0.103222 max=0.165102 Jy/beam ! Clean residual mean=-0.000878 rms=0.035809 Jy/beam ! Combined flux in latest and established models = 3.23493 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 3.23493 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.742517Jy sigma=0.002577 ! Fit after self-cal, rms=0.739342Jy sigma=0.002565 ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=7.651 mas, bpa=-17.39 degrees ! Estimated noise=2178.15 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.383 mas, bmaj=9.041 mas, bpa=-14.29 degrees ! Estimated noise=1467.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.152458 Jy ! Component: 100 - total flux cleaned = 0.168207 Jy ! Component: 150 - total flux cleaned = 0.172547 Jy ! Component: 200 - total flux cleaned = 0.177343 Jy ! Total flux subtracted in 200 components = 0.177343 Jy ! Clean residual min=-0.094766 max=0.137449 Jy/beam ! Clean residual mean=0.001833 rms=0.031890 Jy/beam ! Combined flux in latest and established models = 3.41227 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 3.41227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.698956Jy sigma=0.002464 ! Fit after self-cal, rms=0.698900Jy sigma=0.002463 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.383 x 9.041 at -14.29 degrees (North through East) ! Clean map min=-0.091203 max=3.1905 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02726 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.11 HN 1.00 KP 0.89 ! LA 0.96 MK 1.00 NL 0.88 OV 1.09 ! PT 0.96 SC 0.85 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.973074 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.16 HN 1.11 KP 0.92 ! LA 1.07 MK 1.05 NL 0.97 OV 1.05 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.04662 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 0.94 KP 0.91 ! LA 0.80 MK 0.88 NL 0.93 OV 0.97 ! PT 1.08 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.997063 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 HN 1.05 KP 0.96 ! LA 0.89 MK 1.04 NL 1.05 OV 0.93 ! PT 1.02 SC 1.00 ! ! ! Fit before self-cal, rms=0.698900Jy sigma=0.002463 ! Fit after self-cal, rms=0.590539Jy sigma=0.002102 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.590539Jy sigma=0.002102 ! Fit after self-cal, rms=0.590534Jy sigma=0.002102 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.374 mas, bmaj=8.889 mas, bpa=-13.6 degrees ! Estimated noise=1475.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0506921 Jy ! Component: 100 - total flux cleaned = 0.0578852 Jy ! Component: 150 - total flux cleaned = 0.0578823 Jy ! Component: 200 - total flux cleaned = 0.0578939 Jy ! Total flux subtracted in 200 components = 0.0578939 Jy ! Clean residual min=-0.022218 max=0.027100 Jy/beam ! Clean residual mean=0.000253 rms=0.006888 Jy/beam ! Combined flux in latest and established models = 3.47017 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 54 components and 3.47017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.585238Jy sigma=0.002089 ! Fit after self-cal, rms=0.585222Jy sigma=0.002088 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.585222Jy sigma=0.002088 ! Fit after self-cal, rms=0.434627Jy sigma=0.001559 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637474 Jy ! Component: 100 - total flux cleaned = 0.00354323 Jy ! Component: 150 - total flux cleaned = 0.0014526 Jy ! Component: 200 - total flux cleaned = 0.00142264 Jy ! Total flux subtracted in 200 components = 0.00142264 Jy ! Clean residual min=-0.015764 max=0.019421 Jy/beam ! Clean residual mean=0.000249 rms=0.005574 Jy/beam ! Combined flux in latest and established models = 3.47159 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 67 components and 3.47159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429749Jy sigma=0.001548 ! Fit after self-cal, rms=0.420187Jy sigma=0.001516 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.374 x 8.889 at -13.6 degrees (North through East) ! Clean map min=-0.015889 max=3.2636 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.420187Jy sigma=0.001516 ! Fit after self-cal, rms=0.370532Jy sigma=0.001333 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370532Jy sigma=0.001333 ! Fit after self-cal, rms=0.366557Jy sigma=0.001319 ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=8.848 mas, bpa=-13.61 degrees ! Estimated noise=1470.15 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033948 Jy ! Component: 100 - total flux cleaned = 0.00292638 Jy ! Component: 150 - total flux cleaned = 0.00211117 Jy ! Component: 200 - total flux cleaned = 0.00176511 Jy ! Total flux subtracted in 200 components = 0.00176511 Jy ! Clean residual min=-0.012859 max=0.017304 Jy/beam ! Clean residual mean=0.000363 rms=0.004810 Jy/beam ! Combined flux in latest and established models = 3.47336 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 3.47336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365432Jy sigma=0.001316 ! Fit after self-cal, rms=0.363011Jy sigma=0.001308 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363011Jy sigma=0.001308 ! Fit after self-cal, rms=0.361340Jy sigma=0.001304 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361340Jy sigma=0.001304 ! Fit after self-cal, rms=0.359829Jy sigma=0.001299 ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=8.827 mas, bpa=-13.53 degrees ! Estimated noise=1468.51 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139598 Jy ! Component: 100 - total flux cleaned = -0.000513678 Jy ! Component: 150 - total flux cleaned = -0.00107963 Jy ! Component: 200 - total flux cleaned = -0.00185139 Jy ! Total flux subtracted in 200 components = -0.00185139 Jy ! Clean residual min=-0.011928 max=0.016643 Jy/beam ! Clean residual mean=0.000355 rms=0.004461 Jy/beam ! Combined flux in latest and established models = 3.47151 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 3.47151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359272Jy sigma=0.001297 ! Fit after self-cal, rms=0.358080Jy sigma=0.001293 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.956 mas, bmaj=18.33 mas, bpa=-10.01 degrees ! Estimated noise=1884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.68594e-05 Jy ! Component: 100 - total flux cleaned = -0.000492131 Jy ! Component: 150 - total flux cleaned = -0.00094764 Jy ! Component: 200 - total flux cleaned = -0.00137813 Jy ! Total flux subtracted in 200 components = -0.00137813 Jy ! Clean residual min=-0.016250 max=0.019323 Jy/beam ! Clean residual mean=0.000635 rms=0.006140 Jy/beam ! Combined flux in latest and established models = 3.47013 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 86 components and 3.47013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357954Jy sigma=0.001293 ! Fit after self-cal, rms=0.357060Jy sigma=0.001290 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.613 mas, bmaj=7.548 mas, bpa=-17.03 degrees ! Estimated noise=2179.65 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.78511 Jy ! Component: 100 - total flux cleaned = 3.24912 Jy ! Component: 150 - total flux cleaned = 3.39674 Jy ! Component: 200 - total flux cleaned = 3.45637 Jy ! Total flux subtracted in 200 components = 3.45637 Jy ! Clean residual min=-0.025212 max=0.034806 Jy/beam ! Clean residual mean=0.000053 rms=0.007606 Jy/beam ! Combined flux in latest and established models = 3.45637 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 3.45637 Jy ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=8.827 mas, bpa=-13.53 degrees ! Estimated noise=1468.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00874771 Jy ! Component: 100 - total flux cleaned = 0.014691 Jy ! Component: 150 - total flux cleaned = 0.0174439 Jy ! Component: 200 - total flux cleaned = 0.018996 Jy ! Total flux subtracted in 200 components = 0.018996 Jy ! Clean residual min=-0.016439 max=0.019142 Jy/beam ! Clean residual mean=0.000304 rms=0.005780 Jy/beam ! Combined flux in latest and established models = 3.47536 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 42 components and 3.47536 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.956 mas, bmaj=18.33 mas, bpa=-10.01 degrees ! Estimated noise=1884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417765 Jy ! Component: 100 - total flux cleaned = 0.00476138 Jy ! Component: 150 - total flux cleaned = 0.00425268 Jy ! Component: 200 - total flux cleaned = 0.00335497 Jy ! Total flux subtracted in 200 components = 0.00335498 Jy ! Clean residual min=-0.017502 max=0.022070 Jy/beam ! Clean residual mean=0.000649 rms=0.006864 Jy/beam ! Combined flux in latest and established models = 3.47872 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 3.47872 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=8.827 mas, bpa=-13.53 degrees ! Estimated noise=1468.51 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00184936 Jy ! Component: 100 - total flux cleaned = -0.00137725 Jy ! Component: 150 - total flux cleaned = -0.000951785 Jy ! Component: 200 - total flux cleaned = -0.000942099 Jy ! Total flux subtracted in 200 components = -0.000942099 Jy ! Clean residual min=-0.014534 max=0.018316 Jy/beam ! Clean residual mean=0.000376 rms=0.004885 Jy/beam ! Combined flux in latest and established models = 3.47777 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 3.47777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357982Jy sigma=0.001293 ! Fit after self-cal, rms=0.357314Jy sigma=0.001290 wmodel J1625-2527_S_1996_06_07_yyk\_map.mod ! Writing 65 model components to file: J1625-2527_S_1996_06_07_yyk_map.mod wobs J1625-2527_S_1996_06_07_yyk\_uvs.fits ! Writing UV FITS file: J1625-2527_S_1996_06_07_yyk_uvs.fits wwins J1625-2527_S_1996_06_07_yyk\_map.win ! wwins: Wrote 1 windows to J1625-2527_S_1996_06_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00747647 Jy ! Component: 100 - total flux cleaned = 0.0119596 Jy ! Component: 150 - total flux cleaned = 0.0165124 Jy ! Component: 200 - total flux cleaned = 0.0196342 Jy ! Component: 250 - total flux cleaned = 0.0215107 Jy ! Component: 300 - total flux cleaned = 0.0230961 Jy ! Component: 350 - total flux cleaned = 0.0242365 Jy ! Component: 400 - total flux cleaned = 0.0255054 Jy ! Component: 450 - total flux cleaned = 0.0263782 Jy ! Component: 500 - total flux cleaned = 0.0267188 Jy ! Component: 550 - total flux cleaned = 0.0270402 Jy ! Component: 600 - total flux cleaned = 0.0273401 Jy ! Component: 650 - total flux cleaned = 0.0273348 Jy ! Component: 700 - total flux cleaned = 0.0274755 Jy ! Component: 750 - total flux cleaned = 0.0274761 Jy ! Component: 800 - total flux cleaned = 0.0276092 Jy ! Component: 850 - total flux cleaned = 0.0276105 Jy ! Component: 900 - total flux cleaned = 0.0278546 Jy ! Component: 950 - total flux cleaned = 0.0279701 Jy ! Component: 1000 - total flux cleaned = 0.0279698 Jy ! Component: 1050 - total flux cleaned = 0.0281987 Jy ! Component: 1100 - total flux cleaned = 0.0283104 Jy ! Component: 1150 - total flux cleaned = 0.02842 Jy ! Component: 1200 - total flux cleaned = 0.0288401 Jy ! Component: 1250 - total flux cleaned = 0.0289415 Jy ! Component: 1300 - total flux cleaned = 0.0290397 Jy ! Component: 1350 - total flux cleaned = 0.0294294 Jy ! Component: 1400 - total flux cleaned = 0.0295238 Jy ! Component: 1450 - total flux cleaned = 0.029524 Jy ! Component: 1500 - total flux cleaned = 0.0295252 Jy ! Component: 1550 - total flux cleaned = 0.029526 Jy ! Component: 1600 - total flux cleaned = 0.0297007 Jy ! Component: 1650 - total flux cleaned = 0.0298714 Jy ! Component: 1700 - total flux cleaned = 0.0297874 Jy ! Component: 1750 - total flux cleaned = 0.029953 Jy ! Component: 1800 - total flux cleaned = 0.0297944 Jy ! Component: 1850 - total flux cleaned = 0.0297952 Jy ! Component: 1900 - total flux cleaned = 0.0296407 Jy ! Component: 1950 - total flux cleaned = 0.0294122 Jy ! Component: 2000 - total flux cleaned = 0.0291871 Jy ! Total flux subtracted in 2048 components = 0.0289672 Jy ! Clean residual min=-0.003943 max=0.004439 Jy/beam ! Clean residual mean=0.000075 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 3.50674 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 210 components and 3.50674 Jy ![Exited script file: muppet] wmap "J1625-2527_S_1996_06_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.355 x 8.827 at -13.53 degrees (North through East) ! Clean map min=-0.010515 max=3.2585 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_1996_06_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.25851 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0015547 device "J1625-2527_S_1996_06_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1625-2527_S_1996_06_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.143135 0.143135 0.286271 0.572542 1.14508 2.29017 4.58033 9.16067 18.3213 36.6427 73.2853 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.258 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.355 x 8.827 at -13.53 degrees (North through East) ! Clean map min=-0.010515 max=3.2585 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1625-2527_S_1996_06_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1625-2527_S_1996_06_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1625-2527_S_1996_06_07_yyk_uvs.log closed on Sun Jan 7 18:58:18 2007