! Started logfile: J1625-2527_S_1996_03_13_yyk_uvs.log on Sun Jan 7 18:58:07 2007 obs J1625-2527_S_1996_03_13_yyk_uva.fits ! Reading UV FITS file: J1625-2527_S_1996_03_13_yyk_uva.fits ! AN table 1: 32 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.563889 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 655 lines of history. ! ! Reading 3248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1625-2527_S_1996_03_13_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.63784 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=7.207 mas, bpa=-6.358 degrees ! Estimated noise=3752.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.92389 Jy ! Component: 100 - total flux cleaned = 2.26542 Jy ! Total flux subtracted in 100 components = 2.26542 Jy ! Clean residual min=-0.240312 max=0.560453 Jy/beam ! Clean residual mean=-0.001032 rms=0.102867 Jy/beam ! Combined flux in latest and established models = 2.26542 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 2.26542 Jy ! ! Correcting IF 1. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.195643Jy sigma=0.004727 ! Fit after self-cal, rms=1.194681Jy sigma=0.004723 ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=7.207 mas, bpa=-6.358 degrees ! Estimated noise=3754.99 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=8.713 mas, bpa=-8.745 degrees ! Estimated noise=2980.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.145219 Jy ! Component: 100 - total flux cleaned = 0.145404 Jy ! Component: 150 - total flux cleaned = 0.139463 Jy ! Component: 200 - total flux cleaned = 0.136759 Jy ! Total flux subtracted in 200 components = 0.136759 Jy ! Clean residual min=-0.183070 max=0.390362 Jy/beam ! Clean residual mean=-0.002205 rms=0.093055 Jy/beam ! Combined flux in latest and established models = 2.40218 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 2.40218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.160756Jy sigma=0.004625 ! Fit after self-cal, rms=1.160651Jy sigma=0.004625 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.026 x 8.713 at -8.745 degrees (North through East) ! Clean map min=-0.17984 max=2.2772 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.168836 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.96 HN 0.91 KP 0.79 ! LA 0.82 MK 1.01 NL 0.79 OV 51.38 ! PT 0.86 SC 0.82 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.10198 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.06 HN 0.99 KP 0.83 ! LA 0.92 MK 1.07 NL 0.83 OV 89.69 ! PT 0.82 SC 0.89 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.34056 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.98 HN 0.90 KP 0.84 ! LA 0.70 MK 0.93 NL 0.85 OV 21.25 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.258868 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 0.96 KP 0.88 ! LA 0.79 MK 1.13 NL 0.93 OV 30.11 ! PT 0.91 SC 0.98 ! ! ! Fit before self-cal, rms=1.160651Jy sigma=0.004625 ! Fit after self-cal, rms=2.208176Jy sigma=0.555957 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.208176Jy sigma=0.555957 ! Fit after self-cal, rms=2.208271Jy sigma=0.555957 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=8.921 mas, bpa=-7.675 degrees ! Estimated noise=51.2605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.98059 Jy ! Component: 100 - total flux cleaned = -2.27962 Jy ! Component: 150 - total flux cleaned = -2.35254 Jy ! Component: 200 - total flux cleaned = -2.36138 Jy ! Total flux subtracted in 200 components = -2.36138 Jy ! Clean residual min=-0.022215 max=0.020303 Jy/beam ! Clean residual mean=0.000032 rms=0.005978 Jy/beam ! Combined flux in latest and established models = 0.0407979 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 34 components and 0.0407978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391958Jy sigma=0.015510 ! Fit after self-cal, rms=0.391835Jy sigma=0.015498 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391835Jy sigma=0.015498 ! Fit after self-cal, rms=0.391849Jy sigma=0.015495 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0024523 Jy ! Component: 100 - total flux cleaned = -0.00346745 Jy ! Component: 150 - total flux cleaned = -0.0050323 Jy ! Component: 200 - total flux cleaned = -0.00625779 Jy ! Total flux subtracted in 200 components = -0.00625779 Jy ! Clean residual min=-0.012699 max=0.011377 Jy/beam ! Clean residual mean=0.000004 rms=0.003365 Jy/beam ! Combined flux in latest and established models = 0.03454 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 42 components and 0.03454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392019Jy sigma=0.010532 ! Fit after self-cal, rms=0.391912Jy sigma=0.010529 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.196 x 8.921 at -7.675 degrees (North through East) ! Clean map min=-0.012326 max=0.046108 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.663 mas, bmaj=18.83 mas, bpa=-0.3417 degrees ! Estimated noise=64.8376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00490654 Jy ! Component: 100 - total flux cleaned = -0.00489281 Jy ! Component: 150 - total flux cleaned = -0.00491231 Jy ! Component: 200 - total flux cleaned = -0.00493766 Jy ! Total flux subtracted in 200 components = -0.00493766 Jy ! Clean residual min=-0.004927 max=0.007325 Jy/beam ! Clean residual mean=-0.000020 rms=0.001929 Jy/beam ! Combined flux in latest and established models = 0.0296024 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 43 components and 0.0296024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392161Jy sigma=0.009582 ! Fit after self-cal, rms=0.392142Jy sigma=0.009581 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.525 mas, bmaj=7.447 mas, bpa=-8.408 degrees ! Estimated noise=105.377 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.053676 Jy ! Component: 100 - total flux cleaned = 0.061059 Jy ! Component: 150 - total flux cleaned = 0.0614918 Jy ! Component: 200 - total flux cleaned = 0.0613461 Jy ! Total flux subtracted in 200 components = 0.0613461 Jy ! Clean residual min=-0.011411 max=0.012541 Jy/beam ! Clean residual mean=-0.000019 rms=0.002764 Jy/beam ! Combined flux in latest and established models = 0.0613461 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0613461 Jy ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=8.921 mas, bpa=-7.675 degrees ! Estimated noise=51.2605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0245731 Jy ! Component: 100 - total flux cleaned = -0.0279471 Jy ! Component: 150 - total flux cleaned = -0.0279513 Jy ! Component: 200 - total flux cleaned = -0.0278436 Jy ! Total flux subtracted in 200 components = -0.0278436 Jy ! Clean residual min=-0.001667 max=0.001712 Jy/beam ! Clean residual mean=0.000000 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0335025 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.0335025 Jy ! Inverting map ! Added new window around map position (63.5, -15). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000586141 Jy ! Component: 100 - total flux cleaned = 0.000414449 Jy ! Component: 150 - total flux cleaned = 0.000274637 Jy ! Component: 200 - total flux cleaned = 0.000212748 Jy ! Total flux subtracted in 200 components = 0.000212748 Jy ! Clean residual min=-0.001502 max=0.001625 Jy/beam ! Clean residual mean=0.000001 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.0337152 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.0337152 Jy ! Inverting map ! Added new window around map position (-64, 14.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285841 Jy ! Component: 100 - total flux cleaned = 0.000241329 Jy ! Component: 150 - total flux cleaned = 0.000245782 Jy ! Component: 200 - total flux cleaned = 0.000139219 Jy ! Total flux subtracted in 200 components = 0.000139219 Jy ! Clean residual min=-0.001303 max=0.001340 Jy/beam ! Clean residual mean=0.000003 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.0338545 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.0338545 Jy ! Inverting map ! Added new window around map position (-32, 63). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000371802 Jy ! Component: 100 - total flux cleaned = 0.000417496 Jy ! Component: 150 - total flux cleaned = 0.000414307 Jy ! Component: 200 - total flux cleaned = 0.000372549 Jy ! Total flux subtracted in 200 components = 0.000372549 Jy ! Clean residual min=-0.001431 max=0.001420 Jy/beam ! Clean residual mean=0.000002 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.034227 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.034227 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.663 mas, bmaj=18.83 mas, bpa=-0.3417 degrees ! Estimated noise=64.8376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (29, -56.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118433 Jy ! Component: 100 - total flux cleaned = 0.00129727 Jy ! Component: 150 - total flux cleaned = 0.00134855 Jy ! Component: 200 - total flux cleaned = 0.00139702 Jy ! Total flux subtracted in 200 components = 0.00139702 Jy ! Clean residual min=-0.000839 max=0.000926 Jy/beam ! Clean residual mean=0.000005 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.035624 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 117 components and 0.035624 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=8.921 mas, bpa=-7.675 degrees ! Estimated noise=51.2605 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000394228 Jy ! Component: 100 - total flux cleaned = 0.000562626 Jy ! Component: 150 - total flux cleaned = 0.000603086 Jy ! Component: 200 - total flux cleaned = 0.000680913 Jy ! Total flux subtracted in 200 components = 0.000680913 Jy ! Clean residual min=-0.001295 max=0.001328 Jy/beam ! Clean residual mean=0.000000 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.036305 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 130 components and 0.036305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391926Jy sigma=0.007085 ! Fit after self-cal, rms=0.391649Jy sigma=0.007083 wmodel J1625-2527_S_1996_03_13_yyk\_map.mod ! Writing 130 model components to file: J1625-2527_S_1996_03_13_yyk_map.mod wobs J1625-2527_S_1996_03_13_yyk\_uvs.fits ! Writing UV FITS file: J1625-2527_S_1996_03_13_yyk_uvs.fits wwins J1625-2527_S_1996_03_13_yyk\_map.win ! wwins: Wrote 5 windows to J1625-2527_S_1996_03_13_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123244 Jy ! Component: 100 - total flux cleaned = 0.000390528 Jy ! Component: 150 - total flux cleaned = 0.000723592 Jy ! Component: 200 - total flux cleaned = 0.000980431 Jy ! Component: 250 - total flux cleaned = 0.00118889 Jy ! Component: 300 - total flux cleaned = 0.00135344 Jy ! Component: 350 - total flux cleaned = 0.00144209 Jy ! Component: 400 - total flux cleaned = 0.00156268 Jy ! Component: 450 - total flux cleaned = 0.00164636 Jy ! Component: 500 - total flux cleaned = 0.00172821 Jy ! Component: 550 - total flux cleaned = 0.00177647 Jy ! Component: 600 - total flux cleaned = 0.00180836 Jy ! Component: 650 - total flux cleaned = 0.00187124 Jy ! Component: 700 - total flux cleaned = 0.00188673 Jy ! Component: 750 - total flux cleaned = 0.00190221 Jy ! Component: 800 - total flux cleaned = 0.00191756 Jy ! Component: 850 - total flux cleaned = 0.00191755 Jy ! Component: 900 - total flux cleaned = 0.00191761 Jy ! Component: 950 - total flux cleaned = 0.0019328 Jy ! Component: 1000 - total flux cleaned = 0.00193268 Jy ! Component: 1050 - total flux cleaned = 0.00194776 Jy ! Component: 1100 - total flux cleaned = 0.00194781 Jy ! Component: 1150 - total flux cleaned = 0.00197765 Jy ! Component: 1200 - total flux cleaned = 0.00199262 Jy ! Component: 1250 - total flux cleaned = 0.00200741 Jy ! Component: 1300 - total flux cleaned = 0.00202229 Jy ! Component: 1350 - total flux cleaned = 0.00203705 Jy ! Component: 1400 - total flux cleaned = 0.00203704 Jy ! Component: 1450 - total flux cleaned = 0.00206663 Jy ! Component: 1500 - total flux cleaned = 0.00211101 Jy ! Component: 1550 - total flux cleaned = 0.00212564 Jy ! Component: 1600 - total flux cleaned = 0.00216987 Jy ! Component: 1650 - total flux cleaned = 0.00218467 Jy ! Component: 1700 - total flux cleaned = 0.00222881 Jy ! Component: 1750 - total flux cleaned = 0.00225826 Jy ! Component: 1800 - total flux cleaned = 0.00228781 Jy ! Component: 1850 - total flux cleaned = 0.00230248 Jy ! Component: 1900 - total flux cleaned = 0.00234659 Jy ! Component: 1950 - total flux cleaned = 0.00239064 Jy ! Component: 2000 - total flux cleaned = 0.00240534 Jy ! Total flux subtracted in 2048 components = 0.00243461 Jy ! Clean residual min=-0.000733 max=0.000733 Jy/beam ! Clean residual mean=-0.000010 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.0387396 Jy keep ! Adding 59 model components to the UV plane model. ! The established model now contains 183 components and 0.0387396 Jy ![Exited script file: muppet] wmap "J1625-2527_S_1996_03_13_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.196 x 8.921 at -7.675 degrees (North through East) ! Clean map min=-0.0021753 max=0.03386 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_1996_03_13_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0338602 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246655 device "J1625-2527_S_1996_03_13_yyk\_map.eps/VPS" ! Attempting to open device: 'J1625-2527_S_1996_03_13_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.18535 2.18535 4.3707 8.74139 17.4828 34.9656 69.9311 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.033 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.196 x 8.921 at -7.675 degrees (North through East) ! Clean map min=-0.0021753 max=0.03386 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1625-2527_S_1996_03_13_yyk\_map.gif/gif" ! Attempting to open device: 'J1625-2527_S_1996_03_13_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1625-2527_S_1996_03_13_yyk_uvs.log closed on Sun Jan 7 18:58:12 2007