! Started logfile: J1625-2527_S_1995_07_15_yyk_uvs.log on Sun Jan 7 18:57:54 2007 obs J1625-2527_S_1995_07_15_yyk_uva.fits ! Reading UV FITS file: J1625-2527_S_1995_07_15_yyk_uva.fits ! AN table 1: 129 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.606374 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 796 lines of history. ! ! Reading 14080 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1625-2527_S_1995_07_15_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.89128 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=7.34 mas, bpa=7.582 degrees ! Estimated noise=2336.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.46957 Jy ! Component: 100 - total flux cleaned = 1.71773 Jy ! Total flux subtracted in 100 components = 1.71773 Jy ! Clean residual min=-0.051967 max=0.077465 Jy/beam ! Clean residual mean=0.002644 rms=0.016071 Jy/beam ! Combined flux in latest and established models = 1.71773 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.71773 Jy ! ! Correcting IF 1. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.616728Jy sigma=0.002151 ! Fit after self-cal, rms=0.616169Jy sigma=0.002149 ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=7.34 mas, bpa=7.582 degrees ! Estimated noise=2336.65 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=9.906 mas, bpa=2.677 degrees ! Estimated noise=1534.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.103106 Jy ! Component: 100 - total flux cleaned = 0.147457 Jy ! Component: 150 - total flux cleaned = 0.169473 Jy ! Component: 200 - total flux cleaned = 0.180438 Jy ! Total flux subtracted in 200 components = 0.180438 Jy ! Clean residual min=-0.035925 max=0.060773 Jy/beam ! Clean residual mean=0.006507 rms=0.016021 Jy/beam ! Combined flux in latest and established models = 1.89817 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 1.89817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.598020Jy sigma=0.002099 ! Fit after self-cal, rms=0.598005Jy sigma=0.002099 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.626 x 9.906 at 2.677 degrees (North through East) ! Clean map min=-0.035202 max=1.7083 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00063 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.09 HN 1.00* KP 0.92 ! LA 0.98 MK 1.00 NL 0.92 OV 1.15 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.986249 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.15 HN 1.00* KP 0.91 ! LA 1.04 MK 1.04 NL 0.93 OV 1.08 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02784 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.08 HN 1.00* KP 0.95 ! LA 0.87 MK 0.90 NL 0.99 OV 0.94 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01435 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.12 HN 1.00* KP 0.95 ! LA 0.94 MK 1.03 NL 1.01 OV 0.96 ! PT 0.90 SC 1.00 ! ! ! Fit before self-cal, rms=0.598005Jy sigma=0.002099 ! Fit after self-cal, rms=0.556741Jy sigma=0.001989 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.556741Jy sigma=0.001989 ! Fit after self-cal, rms=0.556722Jy sigma=0.001989 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.636 mas, bmaj=9.885 mas, bpa=2.356 degrees ! Estimated noise=1549.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214255 Jy ! Component: 100 - total flux cleaned = 0.0227498 Jy ! Component: 150 - total flux cleaned = 0.0227712 Jy ! Component: 200 - total flux cleaned = 0.0221841 Jy ! Total flux subtracted in 200 components = 0.0221841 Jy ! Clean residual min=-0.013559 max=0.019457 Jy/beam ! Clean residual mean=0.003260 rms=0.004992 Jy/beam ! Combined flux in latest and established models = 1.92035 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 1.92035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.555833Jy sigma=0.001986 ! Fit after self-cal, rms=0.555820Jy sigma=0.001986 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.555820Jy sigma=0.001986 ! Fit after self-cal, rms=0.518410Jy sigma=0.001836 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00934658 Jy ! Component: 100 - total flux cleaned = 0.00960808 Jy ! Component: 150 - total flux cleaned = 0.0100219 Jy ! Component: 200 - total flux cleaned = 0.0100322 Jy ! Total flux subtracted in 200 components = 0.0100322 Jy ! Clean residual min=-0.015099 max=0.018530 Jy/beam ! Clean residual mean=0.002854 rms=0.005318 Jy/beam ! Combined flux in latest and established models = 1.93039 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 1.93039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518034Jy sigma=0.001835 ! Fit after self-cal, rms=0.512860Jy sigma=0.001816 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.636 x 9.885 at 2.356 degrees (North through East) ! Clean map min=-0.015224 max=1.7457 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512860Jy sigma=0.001816 ! Fit after self-cal, rms=0.507139Jy sigma=0.001800 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.507139Jy sigma=0.001800 ! Fit after self-cal, rms=0.506132Jy sigma=0.001797 ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=9.872 mas, bpa=2.554 degrees ! Estimated noise=1546.56 mJy/beam. ! Added new window around map position (-43.5, 54). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186333 Jy ! Component: 100 - total flux cleaned = 0.0232346 Jy ! Component: 150 - total flux cleaned = 0.024218 Jy ! Component: 200 - total flux cleaned = 0.0248325 Jy ! Total flux subtracted in 200 components = 0.0248325 Jy ! Clean residual min=-0.008710 max=0.013455 Jy/beam ! Clean residual mean=0.002284 rms=0.003302 Jy/beam ! Combined flux in latest and established models = 1.95522 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 81 components and 1.95522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.505573Jy sigma=0.001795 ! Fit after self-cal, rms=0.505337Jy sigma=0.001795 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.505337Jy sigma=0.001795 ! Fit after self-cal, rms=0.504917Jy sigma=0.001792 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.504917Jy sigma=0.001792 ! Fit after self-cal, rms=0.504855Jy sigma=0.001792 ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=9.869 mas, bpa=2.57 degrees ! Estimated noise=1545.66 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402994 Jy ! Component: 100 - total flux cleaned = 0.00439902 Jy ! Component: 150 - total flux cleaned = 0.00490775 Jy ! Component: 200 - total flux cleaned = 0.00522033 Jy ! Total flux subtracted in 200 components = 0.00522033 Jy ! Clean residual min=-0.008276 max=0.012723 Jy/beam ! Clean residual mean=0.002220 rms=0.003183 Jy/beam ! Combined flux in latest and established models = 1.96044 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 97 components and 1.96044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.504750Jy sigma=0.001792 ! Fit after self-cal, rms=0.504741Jy sigma=0.001792 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.203 mas, bmaj=19.92 mas, bpa=14.26 degrees ! Estimated noise=1889.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00822104 Jy ! Component: 100 - total flux cleaned = 0.0103793 Jy ! Component: 150 - total flux cleaned = 0.0113318 Jy ! Component: 200 - total flux cleaned = 0.0119691 Jy ! Total flux subtracted in 200 components = 0.0119691 Jy ! Clean residual min=-0.008177 max=0.011345 Jy/beam ! Clean residual mean=0.003235 rms=0.003668 Jy/beam ! Combined flux in latest and established models = 1.97241 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 104 components and 1.97241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.504748Jy sigma=0.001792 ! Fit after self-cal, rms=0.504732Jy sigma=0.001792 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.845 mas, bmaj=7.313 mas, bpa=7.793 degrees ! Estimated noise=2358.78 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.49011 Jy ! Component: 100 - total flux cleaned = 1.73694 Jy ! Component: 150 - total flux cleaned = 1.82838 Jy ! Component: 200 - total flux cleaned = 1.86656 Jy ! Total flux subtracted in 200 components = 1.86656 Jy ! Clean residual min=-0.018669 max=0.025635 Jy/beam ! Clean residual mean=0.001298 rms=0.005550 Jy/beam ! Combined flux in latest and established models = 1.86656 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.86656 Jy ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=9.869 mas, bpa=2.57 degrees ! Estimated noise=1545.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 7.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380407 Jy ! Component: 100 - total flux cleaned = 0.0590379 Jy ! Component: 150 - total flux cleaned = 0.0734461 Jy ! Component: 200 - total flux cleaned = 0.0838741 Jy ! Total flux subtracted in 200 components = 0.0838741 Jy ! Clean residual min=-0.008323 max=0.012989 Jy/beam ! Clean residual mean=0.002635 rms=0.003050 Jy/beam ! Combined flux in latest and established models = 1.95044 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 68 components and 1.95044 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.203 mas, bmaj=19.92 mas, bpa=14.26 degrees ! Estimated noise=1889.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131656 Jy ! Component: 100 - total flux cleaned = 0.0210341 Jy ! Component: 150 - total flux cleaned = 0.0236269 Jy ! Component: 200 - total flux cleaned = 0.0251525 Jy ! Total flux subtracted in 200 components = 0.0251525 Jy ! Clean residual min=-0.007708 max=0.011096 Jy/beam ! Clean residual mean=0.003070 rms=0.003216 Jy/beam ! Combined flux in latest and established models = 1.97559 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 1.97559 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=9.869 mas, bpa=2.57 degrees ! Estimated noise=1545.66 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00399637 Jy ! Component: 100 - total flux cleaned = -0.00399587 Jy ! Component: 150 - total flux cleaned = -0.00420715 Jy ! Component: 200 - total flux cleaned = -0.00400963 Jy ! Total flux subtracted in 200 components = -0.00400963 Jy ! Clean residual min=-0.007391 max=0.011754 Jy/beam ! Clean residual mean=0.001789 rms=0.002765 Jy/beam ! Combined flux in latest and established models = 1.97158 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 106 components and 1.97158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.504418Jy sigma=0.001791 ! Fit after self-cal, rms=0.504388Jy sigma=0.001791 wmodel J1625-2527_S_1995_07_15_yyk\_map.mod ! Writing 106 model components to file: J1625-2527_S_1995_07_15_yyk_map.mod wobs J1625-2527_S_1995_07_15_yyk\_uvs.fits ! Writing UV FITS file: J1625-2527_S_1995_07_15_yyk_uvs.fits wwins J1625-2527_S_1995_07_15_yyk\_map.win ! wwins: Wrote 3 windows to J1625-2527_S_1995_07_15_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493508 Jy ! Component: 100 - total flux cleaned = 0.00908696 Jy ! Component: 150 - total flux cleaned = 0.0123945 Jy ! Component: 200 - total flux cleaned = 0.0153181 Jy ! Component: 250 - total flux cleaned = 0.0179133 Jy ! Component: 300 - total flux cleaned = 0.0203487 Jy ! Component: 350 - total flux cleaned = 0.0227653 Jy ! Component: 400 - total flux cleaned = 0.0248369 Jy ! Component: 450 - total flux cleaned = 0.0268105 Jy ! Component: 500 - total flux cleaned = 0.0285986 Jy ! Component: 550 - total flux cleaned = 0.0303153 Jy ! Component: 600 - total flux cleaned = 0.0316938 Jy ! Component: 650 - total flux cleaned = 0.0329344 Jy ! Component: 700 - total flux cleaned = 0.0339645 Jy ! Component: 750 - total flux cleaned = 0.0347164 Jy ! Component: 800 - total flux cleaned = 0.0356917 Jy ! Component: 850 - total flux cleaned = 0.0365606 Jy ! Component: 900 - total flux cleaned = 0.0372554 Jy ! Component: 950 - total flux cleaned = 0.0380839 Jy ! Component: 1000 - total flux cleaned = 0.0386723 Jy ! Component: 1050 - total flux cleaned = 0.0393189 Jy ! Component: 1100 - total flux cleaned = 0.0398809 Jy ! Component: 1150 - total flux cleaned = 0.0404293 Jy ! Component: 1200 - total flux cleaned = 0.0410994 Jy ! Component: 1250 - total flux cleaned = 0.0416243 Jy ! Component: 1300 - total flux cleaned = 0.042267 Jy ! Component: 1350 - total flux cleaned = 0.0428965 Jy ! Component: 1400 - total flux cleaned = 0.0433282 Jy ! Component: 1450 - total flux cleaned = 0.0438129 Jy ! Component: 1500 - total flux cleaned = 0.044348 Jy ! Component: 1550 - total flux cleaned = 0.0447567 Jy ! Component: 1600 - total flux cleaned = 0.0452733 Jy ! Component: 1650 - total flux cleaned = 0.0457243 Jy ! Component: 1700 - total flux cleaned = 0.0462774 Jy ! Component: 1750 - total flux cleaned = 0.0467124 Jy ! Component: 1800 - total flux cleaned = 0.0471392 Jy ! Component: 1850 - total flux cleaned = 0.0475064 Jy ! Component: 1900 - total flux cleaned = 0.0478167 Jy ! Component: 1950 - total flux cleaned = 0.048173 Jy ! Component: 2000 - total flux cleaned = 0.0483242 Jy ! Total flux subtracted in 2048 components = 0.0486713 Jy ! Clean residual min=-0.002459 max=0.002706 Jy/beam ! Clean residual mean=0.000312 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 2.02025 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 255 components and 2.02025 Jy ![Exited script file: muppet] wmap "J1625-2527_S_1995_07_15_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.634 x 9.869 at 2.57 degrees (North through East) ! Clean map min=-0.004987 max=1.7511 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_1995_07_15_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.75108 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000960094 device "J1625-2527_S_1995_07_15_yyk\_map.eps/VPS" ! Attempting to open device: 'J1625-2527_S_1995_07_15_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.164486 0.164486 0.328973 0.657946 1.31589 2.63178 5.26357 10.5271 21.0543 42.1085 84.2171 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.751 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.634 x 9.869 at 2.57 degrees (North through East) ! Clean map min=-0.004987 max=1.7511 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1625-2527_S_1995_07_15_yyk\_map.gif/gif" ! Attempting to open device: 'J1625-2527_S_1995_07_15_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1625-2527_S_1995_07_15_yyk_uvs.log closed on Sun Jan 7 18:58:01 2007