! Started logfile: J1625-2527_S_1995_04_19_yyk_uvs.log on Sun Jan 7 18:57:49 2007 obs J1625-2527_S_1995_04_19_yyk_uva.fits ! Reading UV FITS file: J1625-2527_S_1995_04_19_yyk_uva.fits ! AN table 1: 37 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.658859 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 977 lines of history. ! ! Reading 4388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1625-2527_S_1995_04_19_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.80192 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.428 mas, bmaj=6.798 mas, bpa=-3.706 degrees ! Estimated noise=4159.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.36663 Jy ! Component: 100 - total flux cleaned = 1.70194 Jy ! Total flux subtracted in 100 components = 1.70194 Jy ! Clean residual min=-0.137663 max=0.158188 Jy/beam ! Clean residual mean=-0.000151 rms=0.038972 Jy/beam ! Combined flux in latest and established models = 1.70194 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.70194 Jy ! ! Correcting IF 1. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.470893Jy sigma=0.002618 ! Fit after self-cal, rms=0.438718Jy sigma=0.002457 ! Inverting map and beam ! Estimated beam: bmin=2.428 mas, bmaj=6.797 mas, bpa=-3.702 degrees ! Estimated noise=4424 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.432 mas, bmaj=9.246 mas, bpa=-7.344 degrees ! Estimated noise=1690.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.135902 Jy ! Component: 100 - total flux cleaned = 0.136109 Jy ! Component: 150 - total flux cleaned = 0.134127 Jy ! Component: 200 - total flux cleaned = 0.13411 Jy ! Total flux subtracted in 200 components = 0.13411 Jy ! Clean residual min=-0.046934 max=0.055889 Jy/beam ! Clean residual mean=0.000815 rms=0.015028 Jy/beam ! Combined flux in latest and established models = 1.83605 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 33 components and 1.83605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378217Jy sigma=0.002165 ! Fit after self-cal, rms=0.378196Jy sigma=0.002164 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.432 x 9.246 at -7.344 degrees (North through East) ! Clean map min=-0.046434 max=1.6866 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02872 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HN 1.00 KP 0.90 ! LA 0.94 MK 0.97 NL 0.98 OV 1.07 ! PT 0.94 SC 0.86 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.992123 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.15 HN 1.10 KP 0.94 ! LA 1.05 MK 1.03 NL 0.93 OV 1.01 ! PT 0.95 SC 0.93 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03381 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.08 HN 0.97 KP 0.94 ! LA 0.80 MK 0.92 NL 1.04 OV 0.93 ! PT 1.09 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00119 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.11 HN 1.07 KP 0.99 ! LA 0.86 MK 1.06 NL 1.02 OV 1.02 ! PT 0.93 SC 0.92 ! ! ! Fit before self-cal, rms=0.378196Jy sigma=0.002164 ! Fit after self-cal, rms=0.325077Jy sigma=0.001895 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325077Jy sigma=0.001895 ! Fit after self-cal, rms=0.325049Jy sigma=0.001895 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.394 mas, bmaj=9 mas, bpa=-5.945 degrees ! Estimated noise=1712.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410421 Jy ! Component: 100 - total flux cleaned = 0.0483012 Jy ! Component: 150 - total flux cleaned = 0.0486364 Jy ! Component: 200 - total flux cleaned = 0.0483726 Jy ! Total flux subtracted in 200 components = 0.0483726 Jy ! Clean residual min=-0.015242 max=0.018275 Jy/beam ! Clean residual mean=0.000158 rms=0.004443 Jy/beam ! Combined flux in latest and established models = 1.88443 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 1.88443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321231Jy sigma=0.001871 ! Fit after self-cal, rms=0.321182Jy sigma=0.001871 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321182Jy sigma=0.001871 ! Fit after self-cal, rms=0.308189Jy sigma=0.001781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225046 Jy ! Component: 100 - total flux cleaned = 0.00226106 Jy ! Component: 150 - total flux cleaned = 0.00182112 Jy ! Component: 200 - total flux cleaned = 0.00162218 Jy ! Total flux subtracted in 200 components = 0.00162218 Jy ! Clean residual min=-0.015708 max=0.018122 Jy/beam ! Clean residual mean=0.000169 rms=0.004325 Jy/beam ! Combined flux in latest and established models = 1.88605 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 1.88605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307850Jy sigma=0.001780 ! Fit after self-cal, rms=0.306195Jy sigma=0.001769 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.394 x 9 at -5.945 degrees (North through East) ! Clean map min=-0.015548 max=1.7225 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306195Jy sigma=0.001769 ! Fit after self-cal, rms=0.298153Jy sigma=0.001724 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298153Jy sigma=0.001724 ! Fit after self-cal, rms=0.297884Jy sigma=0.001723 ! Inverting map and beam ! Estimated beam: bmin=3.383 mas, bmaj=8.964 mas, bpa=-5.707 degrees ! Estimated noise=1709.03 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246091 Jy ! Component: 100 - total flux cleaned = 0.00222902 Jy ! Component: 150 - total flux cleaned = 0.00202658 Jy ! Component: 200 - total flux cleaned = 0.00185804 Jy ! Total flux subtracted in 200 components = 0.00185804 Jy ! Clean residual min=-0.015537 max=0.017384 Jy/beam ! Clean residual mean=0.000156 rms=0.004215 Jy/beam ! Combined flux in latest and established models = 1.88791 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 1.88791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.297652Jy sigma=0.001721 ! Fit after self-cal, rms=0.297567Jy sigma=0.001721 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.297567Jy sigma=0.001721 ! Fit after self-cal, rms=0.296663Jy sigma=0.001714 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296663Jy sigma=0.001714 ! Fit after self-cal, rms=0.296661Jy sigma=0.001714 ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=8.947 mas, bpa=-5.572 degrees ! Estimated noise=1709.09 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267278 Jy ! Component: 100 - total flux cleaned = 0.00286609 Jy ! Component: 150 - total flux cleaned = 0.00271816 Jy ! Component: 200 - total flux cleaned = 0.00270501 Jy ! Total flux subtracted in 200 components = 0.00270501 Jy ! Clean residual min=-0.015489 max=0.016946 Jy/beam ! Clean residual mean=0.000156 rms=0.004111 Jy/beam ! Combined flux in latest and established models = 1.89061 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 63 components and 1.89061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296506Jy sigma=0.001713 ! Fit after self-cal, rms=0.296487Jy sigma=0.001713 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.153 mas, bmaj=20.1 mas, bpa=-2.883 degrees ! Estimated noise=2134.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245932 Jy ! Component: 100 - total flux cleaned = 0.00247997 Jy ! Component: 150 - total flux cleaned = 0.00232256 Jy ! Component: 200 - total flux cleaned = 0.00202915 Jy ! Total flux subtracted in 200 components = 0.00202915 Jy ! Clean residual min=-0.014732 max=0.017397 Jy/beam ! Clean residual mean=0.000311 rms=0.005364 Jy/beam ! Combined flux in latest and established models = 1.89264 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 65 components and 1.89264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296582Jy sigma=0.001714 ! Fit after self-cal, rms=0.296489Jy sigma=0.001713 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.496 mas, bmaj=6.966 mas, bpa=-5.201 degrees ! Estimated noise=3941.85 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.4331 Jy ! Component: 100 - total flux cleaned = 1.71487 Jy ! Component: 150 - total flux cleaned = 1.81856 Jy ! Component: 200 - total flux cleaned = 1.86732 Jy ! Total flux subtracted in 200 components = 1.86732 Jy ! Clean residual min=-0.026804 max=0.025902 Jy/beam ! Clean residual mean=-0.000043 rms=0.007597 Jy/beam ! Combined flux in latest and established models = 1.86732 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 1.86732 Jy ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=8.947 mas, bpa=-5.572 degrees ! Estimated noise=1709.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204484 Jy ! Component: 100 - total flux cleaned = 0.0222218 Jy ! Component: 150 - total flux cleaned = 0.022927 Jy ! Component: 200 - total flux cleaned = 0.0232345 Jy ! Total flux subtracted in 200 components = 0.0232345 Jy ! Clean residual min=-0.016556 max=0.017797 Jy/beam ! Clean residual mean=0.000147 rms=0.004189 Jy/beam ! Combined flux in latest and established models = 1.89056 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 35 components and 1.89056 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.153 mas, bmaj=20.1 mas, bpa=-2.883 degrees ! Estimated noise=2134.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307853 Jy ! Component: 100 - total flux cleaned = 0.00307558 Jy ! Component: 150 - total flux cleaned = 0.00325068 Jy ! Component: 200 - total flux cleaned = 0.00340948 Jy ! Total flux subtracted in 200 components = 0.00340948 Jy ! Clean residual min=-0.015451 max=0.016643 Jy/beam ! Clean residual mean=0.000313 rms=0.005287 Jy/beam ! Combined flux in latest and established models = 1.89397 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 1.89397 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=8.947 mas, bpa=-5.572 degrees ! Estimated noise=1709.09 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220272 Jy ! Component: 100 - total flux cleaned = -0.000735543 Jy ! Component: 150 - total flux cleaned = -0.00117321 Jy ! Component: 200 - total flux cleaned = -0.00169884 Jy ! Total flux subtracted in 200 components = -0.00169884 Jy ! Clean residual min=-0.015098 max=0.017173 Jy/beam ! Clean residual mean=0.000162 rms=0.004029 Jy/beam ! Combined flux in latest and established models = 1.89227 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 1.89227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296434Jy sigma=0.001713 ! Fit after self-cal, rms=0.296388Jy sigma=0.001713 wmodel J1625-2527_S_1995_04_19_yyk\_map.mod ! Writing 56 model components to file: J1625-2527_S_1995_04_19_yyk_map.mod wobs J1625-2527_S_1995_04_19_yyk\_uvs.fits ! Writing UV FITS file: J1625-2527_S_1995_04_19_yyk_uvs.fits wwins J1625-2527_S_1995_04_19_yyk\_map.win ! wwins: Wrote 1 windows to J1625-2527_S_1995_04_19_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011287 Jy ! Component: 100 - total flux cleaned = 0.00327249 Jy ! Component: 150 - total flux cleaned = 0.00458016 Jy ! Component: 200 - total flux cleaned = 0.00498381 Jy ! Component: 250 - total flux cleaned = 0.00555681 Jy ! Component: 300 - total flux cleaned = 0.00680961 Jy ! Component: 350 - total flux cleaned = 0.00749306 Jy ! Component: 400 - total flux cleaned = 0.00846499 Jy ! Component: 450 - total flux cleaned = 0.00923151 Jy ! Component: 500 - total flux cleaned = 0.00878949 Jy ! Component: 550 - total flux cleaned = 0.00808042 Jy ! Component: 600 - total flux cleaned = 0.00739544 Jy ! Component: 650 - total flux cleaned = 0.00661145 Jy ! Component: 700 - total flux cleaned = 0.00636128 Jy ! Component: 750 - total flux cleaned = 0.00611359 Jy ! Component: 800 - total flux cleaned = 0.00552143 Jy ! Component: 850 - total flux cleaned = 0.00586577 Jy ! Component: 900 - total flux cleaned = 0.00575045 Jy ! Component: 950 - total flux cleaned = 0.00574923 Jy ! Component: 1000 - total flux cleaned = 0.00564443 Jy ! Component: 1050 - total flux cleaned = 0.00564489 Jy ! Component: 1100 - total flux cleaned = 0.00564501 Jy ! Component: 1150 - total flux cleaned = 0.00554927 Jy ! Component: 1200 - total flux cleaned = 0.00554976 Jy ! Component: 1250 - total flux cleaned = 0.00517838 Jy ! Component: 1300 - total flux cleaned = 0.00481719 Jy ! Component: 1350 - total flux cleaned = 0.00437721 Jy ! Component: 1400 - total flux cleaned = 0.00411849 Jy ! Component: 1450 - total flux cleaned = 0.00378485 Jy ! Component: 1500 - total flux cleaned = 0.0032937 Jy ! Component: 1550 - total flux cleaned = 0.00297065 Jy ! Component: 1600 - total flux cleaned = 0.00241809 Jy ! Component: 1650 - total flux cleaned = 0.0021091 Jy ! Component: 1700 - total flux cleaned = 0.00165327 Jy ! Component: 1750 - total flux cleaned = 0.00120615 Jy ! Component: 1800 - total flux cleaned = 0.000841727 Jy ! Component: 1850 - total flux cleaned = 0.000412604 Jy ! Component: 1900 - total flux cleaned = 6.23269e-05 Jy ! Component: 1950 - total flux cleaned = -0.000144044 Jy ! Component: 2000 - total flux cleaned = -0.000211729 Jy ! Total flux subtracted in 2048 components = -0.000547787 Jy ! Clean residual min=-0.004495 max=0.004240 Jy/beam ! Clean residual mean=0.000070 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 1.89172 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 181 components and 1.89172 Jy ![Exited script file: muppet] wmap "J1625-2527_S_1995_04_19_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.377 x 8.947 at -5.572 degrees (North through East) ! Clean map min=-0.013032 max=1.7204 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_1995_04_19_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.72036 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00138779 device "J1625-2527_S_1995_04_19_yyk\_map.eps/VPS" ! Attempting to open device: 'J1625-2527_S_1995_04_19_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.242005 0.242005 0.48401 0.968021 1.93604 3.87208 7.74417 15.4883 30.9767 61.9533 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0041 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.72 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.377 x 8.947 at -5.572 degrees (North through East) ! Clean map min=-0.013032 max=1.7204 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1625-2527_S_1995_04_19_yyk\_map.gif/gif" ! Attempting to open device: 'J1625-2527_S_1995_04_19_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1625-2527_S_1995_04_19_yyk_uvs.log closed on Sun Jan 7 18:57:54 2007