! Started logfile: J1604-2223_X_1997_08_27_yyk_uvs.log on Mon Jan 8 06:51:15 2007 obs J1604-2223_X_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1604-2223_X_1997_08_27_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.892237 visibilities/baseline/integration-bin. ! Found source: J1604-2223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 701 lines of history. ! ! Reading 23448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1604-2223_X_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.28102 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.684 mas, bmaj=1.663 mas, bpa=-10.94 degrees ! Estimated noise=1436.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0791955 Jy ! Component: 100 - total flux cleaned = 0.111823 Jy ! Total flux subtracted in 100 components = 0.111823 Jy ! Clean residual min=-0.011123 max=0.014396 Jy/beam ! Clean residual mean=-0.000087 rms=0.003312 Jy/beam ! Combined flux in latest and established models = 0.111823 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.111823 Jy ! ! Correcting IF 1. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 395 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.260541Jy sigma=0.001437 ! Fit after self-cal, rms=0.257838Jy sigma=0.001418 ! Inverting map and beam ! Estimated beam: bmin=0.684 mas, bmaj=1.663 mas, bpa=-10.94 degrees ! Estimated noise=1436.25 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.879 mas, bmaj=1.958 mas, bpa=-13.7 degrees ! Estimated noise=830.639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385207 Jy ! Component: 100 - total flux cleaned = 0.0557696 Jy ! Component: 150 - total flux cleaned = 0.0644336 Jy ! Component: 200 - total flux cleaned = 0.0688659 Jy ! Total flux subtracted in 200 components = 0.0688659 Jy ! Clean residual min=-0.007734 max=0.009032 Jy/beam ! Clean residual mean=-0.000128 rms=0.002359 Jy/beam ! Combined flux in latest and established models = 0.180689 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 50 components and 0.180689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255495Jy sigma=0.001395 ! Fit after self-cal, rms=0.255453Jy sigma=0.001394 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.879 x 1.958 at -13.7 degrees (North through East) ! Clean map min=-0.0071499 max=0.080149 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.255453Jy sigma=0.001394 ! Fit after self-cal, rms=0.255453Jy sigma=0.001394 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255453Jy sigma=0.001394 ! Fit after self-cal, rms=0.255453Jy sigma=0.001394 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.879 mas, bmaj=1.958 mas, bpa=-13.7 degrees ! Estimated noise=830.639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191491 Jy ! Component: 100 - total flux cleaned = 0.00258616 Jy ! Component: 150 - total flux cleaned = 0.00313794 Jy ! Component: 200 - total flux cleaned = 0.00347828 Jy ! Total flux subtracted in 200 components = 0.00347828 Jy ! Clean residual min=-0.007605 max=0.008579 Jy/beam ! Clean residual mean=-0.000123 rms=0.002300 Jy/beam ! Combined flux in latest and established models = 0.184167 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.184168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255444Jy sigma=0.001394 ! Fit after self-cal, rms=0.255439Jy sigma=0.001394 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255439Jy sigma=0.001394 ! Fit after self-cal, rms=0.251992Jy sigma=0.001379 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607211 Jy ! Component: 100 - total flux cleaned = 0.0081253 Jy ! Component: 150 - total flux cleaned = 0.00848696 Jy ! Component: 200 - total flux cleaned = 0.00878598 Jy ! Total flux subtracted in 200 components = 0.00878598 Jy ! Clean residual min=-0.007408 max=0.008097 Jy/beam ! Clean residual mean=-0.000106 rms=0.002036 Jy/beam ! Combined flux in latest and established models = 0.192953 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.192953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252020Jy sigma=0.001378 ! Fit after self-cal, rms=0.251488Jy sigma=0.001376 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.879 x 1.958 at -13.7 degrees (North through East) ! Clean map min=-0.0067598 max=0.0804 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=4.01 mas, bpa=-11.33 degrees ! Estimated noise=1111.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038465 Jy ! Component: 100 - total flux cleaned = 0.00425599 Jy ! Component: 150 - total flux cleaned = 0.00433907 Jy ! Component: 200 - total flux cleaned = 0.00449123 Jy ! Total flux subtracted in 200 components = 0.00449123 Jy ! Clean residual min=-0.009888 max=0.014649 Jy/beam ! Clean residual mean=-0.000220 rms=0.003504 Jy/beam ! Combined flux in latest and established models = 0.197445 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 57 components and 0.197445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251566Jy sigma=0.001376 ! Fit after self-cal, rms=0.251397Jy sigma=0.001375 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.684 mas, bmaj=1.663 mas, bpa=-10.94 degrees ! Estimated noise=1436.25 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0923612 Jy ! Component: 100 - total flux cleaned = 0.131654 Jy ! Component: 150 - total flux cleaned = 0.153315 Jy ! Component: 200 - total flux cleaned = 0.167129 Jy ! Total flux subtracted in 200 components = 0.167129 Jy ! Clean residual min=-0.009700 max=0.011070 Jy/beam ! Clean residual mean=-0.000075 rms=0.002657 Jy/beam ! Combined flux in latest and established models = 0.167129 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.167129 Jy ! Inverting map and beam ! Estimated beam: bmin=0.879 mas, bmaj=1.958 mas, bpa=-13.7 degrees ! Estimated noise=830.639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158138 Jy ! Component: 100 - total flux cleaned = 0.0225675 Jy ! Component: 150 - total flux cleaned = 0.0259527 Jy ! Component: 200 - total flux cleaned = 0.026985 Jy ! Total flux subtracted in 200 components = 0.026985 Jy ! Clean residual min=-0.006941 max=0.008923 Jy/beam ! Clean residual mean=-0.000103 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 0.194114 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.194114 Jy ! Inverting map ! Added new window around map position (-6.2, -10.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.010501 Jy ! Component: 100 - total flux cleaned = 0.0156625 Jy ! Component: 150 - total flux cleaned = 0.0187818 Jy ! Component: 200 - total flux cleaned = 0.0205183 Jy ! Total flux subtracted in 200 components = 0.0205183 Jy ! Clean residual min=-0.005806 max=0.007263 Jy/beam ! Clean residual mean=-0.000089 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.214633 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 74 components and 0.214633 Jy ! Inverting map ! Added new window around map position (-2.4, -3.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794796 Jy ! Component: 100 - total flux cleaned = 0.00976052 Jy ! Component: 150 - total flux cleaned = 0.0112047 Jy ! Component: 200 - total flux cleaned = 0.0120143 Jy ! Total flux subtracted in 200 components = 0.0120143 Jy ! Clean residual min=-0.006410 max=0.006894 Jy/beam ! Clean residual mean=-0.000082 rms=0.001544 Jy/beam ! Combined flux in latest and established models = 0.226647 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 101 components and 0.226647 Jy ! Inverting map ! Added new window around map position (2.4, 4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00739147 Jy ! Component: 100 - total flux cleaned = 0.00997868 Jy ! Component: 150 - total flux cleaned = 0.0110512 Jy ! Component: 200 - total flux cleaned = 0.0114302 Jy ! Total flux subtracted in 200 components = 0.0114302 Jy ! Clean residual min=-0.005838 max=0.004908 Jy/beam ! Clean residual mean=-0.000078 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.238077 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 123 components and 0.238077 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=4.01 mas, bpa=-11.33 degrees ! Estimated noise=1111.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203232 Jy ! Component: 100 - total flux cleaned = 0.00178018 Jy ! Component: 150 - total flux cleaned = 0.00178444 Jy ! Component: 200 - total flux cleaned = 0.00169476 Jy ! Total flux subtracted in 200 components = 0.00169476 Jy ! Clean residual min=-0.008198 max=0.006707 Jy/beam ! Clean residual mean=-0.000161 rms=0.002271 Jy/beam ! Combined flux in latest and established models = 0.239772 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 142 components and 0.239772 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.879 mas, bmaj=1.958 mas, bpa=-13.7 degrees ! Estimated noise=830.639 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000626953 Jy ! Component: 100 - total flux cleaned = -0.000548839 Jy ! Component: 150 - total flux cleaned = -0.000474261 Jy ! Component: 200 - total flux cleaned = -0.000402436 Jy ! Total flux subtracted in 200 components = -0.000402436 Jy ! Clean residual min=-0.005647 max=0.004921 Jy/beam ! Clean residual mean=-0.000073 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.239369 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 157 components and 0.239369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250375Jy sigma=0.001371 ! Fit after self-cal, rms=0.250273Jy sigma=0.001370 wmodel J1604-2223_X_1997_08_27_yyk\_map.mod ! Writing 157 model components to file: J1604-2223_X_1997_08_27_yyk_map.mod wobs J1604-2223_X_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1604-2223_X_1997_08_27_yyk_uvs.fits wwins J1604-2223_X_1997_08_27_yyk\_map.win ! wwins: Wrote 4 windows to J1604-2223_X_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00214595 Jy ! Component: 100 - total flux cleaned = -0.00232546 Jy ! Component: 150 - total flux cleaned = -0.0027317 Jy ! Component: 200 - total flux cleaned = -0.00319571 Jy ! Component: 250 - total flux cleaned = -0.00387034 Jy ! Component: 300 - total flux cleaned = -0.00445471 Jy ! Component: 350 - total flux cleaned = -0.00509333 Jy ! Component: 400 - total flux cleaned = -0.005715 Jy ! Component: 450 - total flux cleaned = -0.00618706 Jy ! Component: 500 - total flux cleaned = -0.00678131 Jy ! Component: 550 - total flux cleaned = -0.00723227 Jy ! Component: 600 - total flux cleaned = -0.00773814 Jy ! Component: 650 - total flux cleaned = -0.00829592 Jy ! Component: 700 - total flux cleaned = -0.00872186 Jy ! Component: 750 - total flux cleaned = -0.00919952 Jy ! Component: 800 - total flux cleaned = -0.0096681 Jy ! Component: 850 - total flux cleaned = -0.0103032 Jy ! Component: 900 - total flux cleaned = -0.0107582 Jy ! Component: 950 - total flux cleaned = -0.0111505 Jy ! Component: 1000 - total flux cleaned = -0.0114814 Jy ! Component: 1050 - total flux cleaned = -0.0119162 Jy ! Component: 1100 - total flux cleaned = -0.01229 Jy ! Component: 1150 - total flux cleaned = -0.0126595 Jy ! Component: 1200 - total flux cleaned = -0.01266 Jy ! Component: 1250 - total flux cleaned = -0.013125 Jy ! Component: 1300 - total flux cleaned = -0.0133798 Jy ! Component: 1350 - total flux cleaned = -0.0135308 Jy ! Component: 1400 - total flux cleaned = -0.0137804 Jy ! Component: 1450 - total flux cleaned = -0.0140759 Jy ! Component: 1500 - total flux cleaned = -0.01432 Jy ! Component: 1550 - total flux cleaned = -0.014417 Jy ! Component: 1600 - total flux cleaned = -0.0147038 Jy ! Component: 1650 - total flux cleaned = -0.0148451 Jy ! Component: 1700 - total flux cleaned = -0.0149847 Jy ! Component: 1750 - total flux cleaned = -0.0151234 Jy ! Component: 1800 - total flux cleaned = -0.0153066 Jy ! Component: 1850 - total flux cleaned = -0.0154878 Jy ! Component: 1900 - total flux cleaned = -0.0157569 Jy ! Component: 1950 - total flux cleaned = -0.0158008 Jy ! Component: 2000 - total flux cleaned = -0.0158889 Jy ! Total flux subtracted in 2048 components = -0.0161076 Jy ! Clean residual min=-0.002575 max=0.003370 Jy/beam ! Clean residual mean=-0.000041 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.223262 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 302 components and 0.223262 Jy ![Exited script file: muppet] wmap "J1604-2223_X_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.879 x 1.958 at -13.7 degrees (North through East) ! Clean map min=-0.0053612 max=0.078482 Jy/beam ! Writing clean map to FITS file: J1604-2223_X_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.078482 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000861376 device "J1604-2223_X_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1604-2223_X_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.29264 3.29264 6.58528 13.1706 26.3411 52.6822 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.078 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.879 x 1.958 at -13.7 degrees (North through East) ! Clean map min=-0.0053612 max=0.078482 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1604-2223_X_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1604-2223_X_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1604-2223_X_1997_08_27_yyk_uvs.log closed on Mon Jan 8 06:51:23 2007