! Started logfile: J1558-1409_X_1997_05_07_yyk_uvs.log on Mon Jan 8 06:49:12 2007 obs J1558-1409_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1558-1409_X_1997_05_07_yyk_uva.fits ! AN table 1: 131 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.797795 visibilities/baseline/integration-bin. ! Found source: J1558-1409 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 18812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1558-1409_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.263694 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7057 mas, bmaj=1.896 mas, bpa=-4.202 degrees ! Estimated noise=1222.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0820002 Jy ! Component: 100 - total flux cleaned = 0.116249 Jy ! Total flux subtracted in 100 components = 0.116249 Jy ! Clean residual min=-0.017946 max=0.046295 Jy/beam ! Clean residual mean=0.000685 rms=0.006284 Jy/beam ! Combined flux in latest and established models = 0.116249 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.116249 Jy ! ! Correcting IF 1. ! A total of 160 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.239290Jy sigma=0.001518 ! Fit after self-cal, rms=0.239040Jy sigma=0.001515 ! Inverting map and beam ! Estimated beam: bmin=0.7058 mas, bmaj=1.896 mas, bpa=-4.201 degrees ! Estimated noise=1222.55 mJy/beam. ! Added new window around map position (6, 2.8). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0538097 Jy ! Component: 100 - total flux cleaned = 0.0815465 Jy ! Total flux subtracted in 100 components = 0.0815465 Jy ! Clean residual min=-0.015495 max=0.019672 Jy/beam ! Clean residual mean=0.000495 rms=0.004629 Jy/beam ! Combined flux in latest and established models = 0.197796 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 0.197796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226395Jy sigma=0.001409 ! Fit after self-cal, rms=0.223259Jy sigma=0.001385 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9156 mas, bmaj=2.509 mas, bpa=-5.635 degrees ! Estimated noise=754.736 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0504339 Jy ! Component: 100 - total flux cleaned = 0.0797747 Jy ! Component: 150 - total flux cleaned = 0.0991556 Jy ! Component: 200 - total flux cleaned = 0.112159 Jy ! Total flux subtracted in 200 components = 0.112159 Jy ! Clean residual min=-0.011929 max=0.022549 Jy/beam ! Clean residual mean=0.000408 rms=0.003839 Jy/beam ! Combined flux in latest and established models = 0.309955 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 59 model components to the UV plane model. ! The established model now contains 95 components and 0.309955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215735Jy sigma=0.001314 ! Fit after self-cal, rms=0.215289Jy sigma=0.001310 ! Inverting map ! Added new window around map position (3.2, 1.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.024536 Jy ! Component: 100 - total flux cleaned = 0.0354201 Jy ! Component: 150 - total flux cleaned = 0.0416073 Jy ! Component: 200 - total flux cleaned = 0.0445824 Jy ! Total flux subtracted in 200 components = 0.0445824 Jy ! Clean residual min=-0.011217 max=0.013383 Jy/beam ! Clean residual mean=0.000176 rms=0.002352 Jy/beam ! Combined flux in latest and established models = 0.354538 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 125 components and 0.354538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213410Jy sigma=0.001295 ! Fit after self-cal, rms=0.213377Jy sigma=0.001294 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9156 x 2.509 at -5.635 degrees (North through East) ! Clean map min=-0.010395 max=0.097543 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.213377Jy sigma=0.001294 ! Fit after self-cal, rms=0.213321Jy sigma=0.001294 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213321Jy sigma=0.001294 ! Fit after self-cal, rms=0.213319Jy sigma=0.001294 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9178 mas, bmaj=2.511 mas, bpa=-5.627 degrees ! Estimated noise=755.121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100374 Jy ! Component: 100 - total flux cleaned = 0.0118962 Jy ! Component: 150 - total flux cleaned = 0.0133872 Jy ! Component: 200 - total flux cleaned = 0.0144667 Jy ! Total flux subtracted in 200 components = 0.0144667 Jy ! Clean residual min=-0.008915 max=0.007593 Jy/beam ! Clean residual mean=0.000107 rms=0.001950 Jy/beam ! Combined flux in latest and established models = 0.369004 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 161 components and 0.369004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212648Jy sigma=0.001289 ! Fit after self-cal, rms=0.212567Jy sigma=0.001288 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212567Jy sigma=0.001288 ! Fit after self-cal, rms=0.211039Jy sigma=0.001277 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317001 Jy ! Component: 100 - total flux cleaned = 0.00420527 Jy ! Component: 150 - total flux cleaned = 0.00505285 Jy ! Component: 200 - total flux cleaned = 0.00555668 Jy ! Total flux subtracted in 200 components = 0.00555668 Jy ! Clean residual min=-0.007823 max=0.006202 Jy/beam ! Clean residual mean=0.000094 rms=0.001713 Jy/beam ! Combined flux in latest and established models = 0.374561 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 182 components and 0.374561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210838Jy sigma=0.001276 ! Fit after self-cal, rms=0.210676Jy sigma=0.001275 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9178 x 2.511 at -5.627 degrees (North through East) ! Clean map min=-0.0076194 max=0.091711 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.386 mas, bmaj=4.639 mas, bpa=5.903 degrees ! Estimated noise=951.296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029269 Jy ! Component: 100 - total flux cleaned = 0.00380308 Jy ! Component: 150 - total flux cleaned = 0.00388715 Jy ! Component: 200 - total flux cleaned = 0.00403477 Jy ! Total flux subtracted in 200 components = 0.00403477 Jy ! Clean residual min=-0.007762 max=0.007059 Jy/beam ! Clean residual mean=0.000160 rms=0.002323 Jy/beam ! Combined flux in latest and established models = 0.378596 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 202 components and 0.378596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210603Jy sigma=0.001274 ! Fit after self-cal, rms=0.210548Jy sigma=0.001274 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7058 mas, bmaj=1.896 mas, bpa=-4.201 degrees ! Estimated noise=1223.86 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0964084 Jy ! Component: 100 - total flux cleaned = 0.153233 Jy ! Component: 150 - total flux cleaned = 0.193847 Jy ! Component: 200 - total flux cleaned = 0.224607 Jy ! Total flux subtracted in 200 components = 0.224607 Jy ! Clean residual min=-0.012155 max=0.013541 Jy/beam ! Clean residual mean=0.000424 rms=0.003771 Jy/beam ! Combined flux in latest and established models = 0.224607 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.224607 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9178 mas, bmaj=2.511 mas, bpa=-5.627 degrees ! Estimated noise=755.121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0439704 Jy ! Component: 100 - total flux cleaned = 0.0733394 Jy ! Component: 150 - total flux cleaned = 0.0940081 Jy ! Component: 200 - total flux cleaned = 0.108993 Jy ! Total flux subtracted in 200 components = 0.108993 Jy ! Clean residual min=-0.007472 max=0.008449 Jy/beam ! Clean residual mean=0.000292 rms=0.002422 Jy/beam ! Combined flux in latest and established models = 0.3336 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 126 components and 0.3336 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.386 mas, bmaj=4.639 mas, bpa=5.903 degrees ! Estimated noise=951.296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170871 Jy ! Component: 100 - total flux cleaned = 0.0271116 Jy ! Component: 150 - total flux cleaned = 0.0334166 Jy ! Component: 200 - total flux cleaned = 0.0376133 Jy ! Total flux subtracted in 200 components = 0.0376133 Jy ! Clean residual min=-0.008165 max=0.007095 Jy/beam ! Clean residual mean=0.000231 rms=0.002384 Jy/beam ! Combined flux in latest and established models = 0.371213 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 167 components and 0.371213 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9178 mas, bmaj=2.511 mas, bpa=-5.627 degrees ! Estimated noise=755.121 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139563 Jy ! Component: 100 - total flux cleaned = 0.00232384 Jy ! Component: 150 - total flux cleaned = 0.00311675 Jy ! Component: 200 - total flux cleaned = 0.00370302 Jy ! Total flux subtracted in 200 components = 0.00370302 Jy ! Clean residual min=-0.007351 max=0.005757 Jy/beam ! Clean residual mean=0.000100 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 0.374916 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 191 components and 0.374916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210528Jy sigma=0.001274 ! Fit after self-cal, rms=0.210484Jy sigma=0.001273 wmodel J1558-1409_X_1997_05_07_yyk\_map.mod ! Writing 191 model components to file: J1558-1409_X_1997_05_07_yyk_map.mod wobs J1558-1409_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1558-1409_X_1997_05_07_yyk_uvs.fits wwins J1558-1409_X_1997_05_07_yyk\_map.win ! wwins: Wrote 4 windows to J1558-1409_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00326108 Jy ! Component: 100 - total flux cleaned = -0.00415303 Jy ! Component: 150 - total flux cleaned = -0.00506641 Jy ! Component: 200 - total flux cleaned = -0.00599518 Jy ! Component: 250 - total flux cleaned = -0.00695643 Jy ! Component: 300 - total flux cleaned = -0.00795469 Jy ! Component: 350 - total flux cleaned = -0.00883336 Jy ! Component: 400 - total flux cleaned = -0.00975498 Jy ! Component: 450 - total flux cleaned = -0.0102727 Jy ! Component: 500 - total flux cleaned = -0.0103465 Jy ! Component: 550 - total flux cleaned = -0.0106285 Jy ! Component: 600 - total flux cleaned = -0.0106955 Jy ! Component: 650 - total flux cleaned = -0.0108293 Jy ! Component: 700 - total flux cleaned = -0.0110262 Jy ! Component: 750 - total flux cleaned = -0.0110911 Jy ! Component: 800 - total flux cleaned = -0.01128 Jy ! Component: 850 - total flux cleaned = -0.0113399 Jy ! Component: 900 - total flux cleaned = -0.0113388 Jy ! Component: 950 - total flux cleaned = -0.0111609 Jy ! Component: 1000 - total flux cleaned = -0.0113969 Jy ! Component: 1050 - total flux cleaned = -0.0114542 Jy ! Component: 1100 - total flux cleaned = -0.0116811 Jy ! Component: 1150 - total flux cleaned = -0.0115693 Jy ! Component: 1200 - total flux cleaned = -0.0116794 Jy ! Component: 1250 - total flux cleaned = -0.0117879 Jy ! Component: 1300 - total flux cleaned = -0.0118945 Jy ! Component: 1350 - total flux cleaned = -0.0120533 Jy ! Component: 1400 - total flux cleaned = -0.0121573 Jy ! Component: 1450 - total flux cleaned = -0.0123639 Jy ! Component: 1500 - total flux cleaned = -0.0124652 Jy ! Component: 1550 - total flux cleaned = -0.0125657 Jy ! Component: 1600 - total flux cleaned = -0.012665 Jy ! Component: 1650 - total flux cleaned = -0.0129096 Jy ! Component: 1700 - total flux cleaned = -0.0129579 Jy ! Component: 1750 - total flux cleaned = -0.0131491 Jy ! Component: 1800 - total flux cleaned = -0.0132437 Jy ! Component: 1850 - total flux cleaned = -0.0134769 Jy ! Component: 1900 - total flux cleaned = -0.0136148 Jy ! Component: 1950 - total flux cleaned = -0.0135687 Jy ! Component: 2000 - total flux cleaned = -0.0137047 Jy ! Total flux subtracted in 2048 components = -0.0139289 Jy ! Clean residual min=-0.002226 max=0.002774 Jy/beam ! Clean residual mean=0.000051 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.360987 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 320 components and 0.360988 Jy ![Exited script file: muppet] wmap "J1558-1409_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9178 x 2.511 at -5.627 degrees (North through East) ! Clean map min=-0.006034 max=0.092936 Jy/beam ! Writing clean map to FITS file: J1558-1409_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0929361 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000866653 device "J1558-1409_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1558-1409_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.79758 2.79758 5.59515 11.1903 22.3806 44.7612 89.5225 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9178 x 2.511 at -5.627 degrees (North through East) ! Clean map min=-0.006034 max=0.092936 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1558-1409_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1558-1409_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1558-1409_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 06:49:22 2007