! Started logfile: J1526-1351_S_1997_05_07_yyk_uvs.log on Sun Jan 7 18:46:11 2007 obs J1526-1351_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1526-1351_S_1997_05_07_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.614059 visibilities/baseline/integration-bin. ! Found source: J1526-1351 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 615 lines of history. ! ! Reading 16248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1526-1351_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.959072 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.733 mas, bmaj=12.38 mas, bpa=18.7 degrees ! Estimated noise=2011.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.61487 Jy ! Component: 100 - total flux cleaned = 0.857095 Jy ! Total flux subtracted in 100 components = 0.857095 Jy ! Clean residual min=-0.066060 max=0.086443 Jy/beam ! Clean residual mean=0.008417 rms=0.029703 Jy/beam ! Combined flux in latest and established models = 0.857095 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.857095 Jy ! ! Correcting IF 1. ! A total of 466 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 321 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 321 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 321 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.472213Jy sigma=0.002025 ! Fit after self-cal, rms=0.471567Jy sigma=0.002023 ! Inverting map and beam ! Estimated beam: bmin=3.733 mas, bmaj=12.38 mas, bpa=18.7 degrees ! Estimated noise=2011.7 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.997 mas, bmaj=14.63 mas, bpa=15.48 degrees ! Estimated noise=1247.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.19192 Jy ! Component: 100 - total flux cleaned = 0.291181 Jy ! Component: 150 - total flux cleaned = 0.348656 Jy ! Component: 200 - total flux cleaned = 0.382614 Jy ! Total flux subtracted in 200 components = 0.382614 Jy ! Clean residual min=-0.054558 max=0.127732 Jy/beam ! Clean residual mean=0.010279 rms=0.032027 Jy/beam ! Combined flux in latest and established models = 1.23971 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 67 model components to the UV plane model. ! The established model now contains 106 components and 1.23971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395054Jy sigma=0.001730 ! Fit after self-cal, rms=0.394628Jy sigma=0.001728 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.997 x 14.63 at 15.48 degrees (North through East) ! Clean map min=-0.053747 max=0.66019 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01277 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.35 HN 0.95 KP 0.87 ! LA 0.86 MK 1.00* NL 1.00* OV 1.27 ! PT 0.81 SC 0.85 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.953578 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.41 HN 0.94 KP 0.98 ! LA 0.94 MK 1.00* NL 0.99 OV 1.17 ! PT 0.82 SC 1.26 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.958403 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.33 HN 0.82 KP 0.90 ! LA 0.71 MK 1.00* NL 0.97 OV 1.08 ! PT 0.95 SC 1.77 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.565955 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.41 HN 0.92 KP 0.95 ! LA 0.79 MK 1.00* NL 1.07 OV 1.26 ! PT 0.81 SC 8.53 ! ! ! Fit before self-cal, rms=0.394628Jy sigma=0.001728 ! Fit after self-cal, rms=0.479185Jy sigma=0.004470 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.479185Jy sigma=0.004470 ! Fit after self-cal, rms=0.479385Jy sigma=0.004470 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.968 mas, bmaj=15.75 mas, bpa=5.992 degrees ! Estimated noise=700.799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.402623 Jy ! Component: 100 - total flux cleaned = -0.527224 Jy ! Component: 150 - total flux cleaned = -0.581477 Jy ! Component: 200 - total flux cleaned = -0.607624 Jy ! Total flux subtracted in 200 components = -0.607624 Jy ! Clean residual min=-0.023426 max=0.033386 Jy/beam ! Clean residual mean=0.001189 rms=0.008828 Jy/beam ! Combined flux in latest and established models = 0.632085 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 55 model components to the UV plane model. ! The established model now contains 138 components and 0.632085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.505238Jy sigma=0.002469 ! Fit after self-cal, rms=0.505075Jy sigma=0.002468 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.505075Jy sigma=0.002468 ! Fit after self-cal, rms=0.503984Jy sigma=0.002465 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0127843 Jy ! Component: 100 - total flux cleaned = -0.0167204 Jy ! Component: 150 - total flux cleaned = -0.017151 Jy ! Component: 200 - total flux cleaned = -0.0171542 Jy ! Total flux subtracted in 200 components = -0.0171542 Jy ! Clean residual min=-0.024086 max=0.032065 Jy/beam ! Clean residual mean=0.001667 rms=0.008759 Jy/beam ! Combined flux in latest and established models = 0.614931 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 147 components and 0.614931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.507069Jy sigma=0.002461 ! Fit after self-cal, rms=0.506887Jy sigma=0.002461 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.968 x 15.75 at 5.992 degrees (North through East) ! Clean map min=-0.023883 max=0.35851 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.506887Jy sigma=0.002461 ! Fit after self-cal, rms=0.278979Jy sigma=0.001408 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278979Jy sigma=0.001408 ! Fit after self-cal, rms=0.278907Jy sigma=0.001408 ! Inverting map and beam ! Estimated beam: bmin=5.815 mas, bmaj=15.9 mas, bpa=5.873 degrees ! Estimated noise=613.159 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00424305 Jy ! Component: 100 - total flux cleaned = -0.00463353 Jy ! Component: 150 - total flux cleaned = -0.0047822 Jy ! Component: 200 - total flux cleaned = -0.00465673 Jy ! Total flux subtracted in 200 components = -0.00465673 Jy ! Clean residual min=-0.023051 max=0.030657 Jy/beam ! Clean residual mean=0.001482 rms=0.008567 Jy/beam ! Combined flux in latest and established models = 0.610274 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 157 components and 0.610274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278648Jy sigma=0.001405 ! Fit after self-cal, rms=0.278612Jy sigma=0.001405 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278612Jy sigma=0.001405 ! Fit after self-cal, rms=0.288078Jy sigma=0.001402 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288078Jy sigma=0.001402 ! Fit after self-cal, rms=0.288062Jy sigma=0.001402 ! Inverting map and beam ! Estimated beam: bmin=5.835 mas, bmaj=16.04 mas, bpa=5.544 degrees ! Estimated noise=613.967 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00245259 Jy ! Component: 100 - total flux cleaned = -0.00280814 Jy ! Component: 150 - total flux cleaned = -0.00280541 Jy ! Component: 200 - total flux cleaned = -0.00280257 Jy ! Total flux subtracted in 200 components = -0.00280257 Jy ! Clean residual min=-0.022326 max=0.030765 Jy/beam ! Clean residual mean=0.001444 rms=0.008578 Jy/beam ! Combined flux in latest and established models = 0.607471 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 160 components and 0.607471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287926Jy sigma=0.001400 ! Fit after self-cal, rms=0.287911Jy sigma=0.001400 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.207 mas, bmaj=19.21 mas, bpa=9.282 degrees ! Estimated noise=664.529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253466 Jy ! Component: 100 - total flux cleaned = 0.00251326 Jy ! Component: 150 - total flux cleaned = 0.00252128 Jy ! Component: 200 - total flux cleaned = 0.00260638 Jy ! Total flux subtracted in 200 components = 0.00260638 Jy ! Clean residual min=-0.026491 max=0.036978 Jy/beam ! Clean residual mean=0.001907 rms=0.011053 Jy/beam ! Combined flux in latest and established models = 0.610078 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 165 components and 0.610078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288014Jy sigma=0.001400 ! Fit after self-cal, rms=0.288001Jy sigma=0.001400 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.43 mas, bmaj=12.72 mas, bpa=12.61 degrees ! Estimated noise=1096.27 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.320579 Jy ! Component: 100 - total flux cleaned = 0.435771 Jy ! Component: 150 - total flux cleaned = 0.495837 Jy ! Component: 200 - total flux cleaned = 0.529908 Jy ! Total flux subtracted in 200 components = 0.529908 Jy ! Clean residual min=-0.023187 max=0.025338 Jy/beam ! Clean residual mean=0.001636 rms=0.008325 Jy/beam ! Combined flux in latest and established models = 0.529908 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 71 model components to the UV plane model. ! The established model now contains 71 components and 0.529908 Jy ! Inverting map and beam ! Estimated beam: bmin=5.835 mas, bmaj=16.04 mas, bpa=5.544 degrees ! Estimated noise=613.967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0358289 Jy ! Component: 100 - total flux cleaned = 0.0529639 Jy ! Component: 150 - total flux cleaned = 0.0620716 Jy ! Component: 200 - total flux cleaned = 0.0663475 Jy ! Total flux subtracted in 200 components = 0.0663475 Jy ! Clean residual min=-0.023413 max=0.032266 Jy/beam ! Clean residual mean=0.001782 rms=0.009028 Jy/beam ! Combined flux in latest and established models = 0.596256 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 92 components and 0.596256 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.207 mas, bmaj=19.21 mas, bpa=9.282 degrees ! Estimated noise=664.529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654105 Jy ! Component: 100 - total flux cleaned = 0.00738302 Jy ! Component: 150 - total flux cleaned = 0.00824052 Jy ! Component: 200 - total flux cleaned = 0.00875056 Jy ! Total flux subtracted in 200 components = 0.00875056 Jy ! Clean residual min=-0.027149 max=0.038414 Jy/beam ! Clean residual mean=0.002124 rms=0.011331 Jy/beam ! Combined flux in latest and established models = 0.605006 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 101 components and 0.605006 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.835 mas, bmaj=16.04 mas, bpa=5.544 degrees ! Estimated noise=613.967 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266448 Jy ! Component: 100 - total flux cleaned = -0.00282239 Jy ! Component: 150 - total flux cleaned = -0.00295802 Jy ! Component: 200 - total flux cleaned = -0.00295633 Jy ! Total flux subtracted in 200 components = -0.00295633 Jy ! Clean residual min=-0.022864 max=0.032032 Jy/beam ! Clean residual mean=0.001604 rms=0.008814 Jy/beam ! Combined flux in latest and established models = 0.60205 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.60205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288041Jy sigma=0.001405 ! Fit after self-cal, rms=0.287851Jy sigma=0.001405 wmodel J1526-1351_S_1997_05_07_yyk\_map.mod ! Writing 113 model components to file: J1526-1351_S_1997_05_07_yyk_map.mod wobs J1526-1351_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1526-1351_S_1997_05_07_yyk_uvs.fits wwins J1526-1351_S_1997_05_07_yyk\_map.win ! wwins: Wrote 1 windows to J1526-1351_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129597 Jy ! Component: 100 - total flux cleaned = 0.0170565 Jy ! Component: 150 - total flux cleaned = 0.0195212 Jy ! Component: 200 - total flux cleaned = 0.0226496 Jy ! Component: 250 - total flux cleaned = 0.0272484 Jy ! Component: 300 - total flux cleaned = 0.0317885 Jy ! Component: 350 - total flux cleaned = 0.0360267 Jy ! Component: 400 - total flux cleaned = 0.0397777 Jy ! Component: 450 - total flux cleaned = 0.0431058 Jy ! Component: 500 - total flux cleaned = 0.0462719 Jy ! Component: 550 - total flux cleaned = 0.0486927 Jy ! Component: 600 - total flux cleaned = 0.0511902 Jy ! Component: 650 - total flux cleaned = 0.053575 Jy ! Component: 700 - total flux cleaned = 0.0551565 Jy ! Component: 750 - total flux cleaned = 0.0566807 Jy ! Component: 800 - total flux cleaned = 0.0578263 Jy ! Component: 850 - total flux cleaned = 0.0581426 Jy ! Component: 900 - total flux cleaned = 0.0586073 Jy ! Component: 950 - total flux cleaned = 0.0590608 Jy ! Component: 1000 - total flux cleaned = 0.0596494 Jy ! Component: 1050 - total flux cleaned = 0.0600803 Jy ! Component: 1100 - total flux cleaned = 0.0603608 Jy ! Component: 1150 - total flux cleaned = 0.0603601 Jy ! Component: 1200 - total flux cleaned = 0.0606256 Jy ! Component: 1250 - total flux cleaned = 0.0604946 Jy ! Component: 1300 - total flux cleaned = 0.0604968 Jy ! Component: 1350 - total flux cleaned = 0.0602502 Jy ! Component: 1400 - total flux cleaned = 0.0603742 Jy ! Component: 1450 - total flux cleaned = 0.0602534 Jy ! Component: 1500 - total flux cleaned = 0.0600163 Jy ! Component: 1550 - total flux cleaned = 0.0597839 Jy ! Component: 1600 - total flux cleaned = 0.0593286 Jy ! Component: 1650 - total flux cleaned = 0.0593283 Jy ! Component: 1700 - total flux cleaned = 0.0591081 Jy ! Component: 1750 - total flux cleaned = 0.0591083 Jy ! Component: 1800 - total flux cleaned = 0.059214 Jy ! Component: 1850 - total flux cleaned = 0.0588988 Jy ! Component: 1900 - total flux cleaned = 0.059004 Jy ! Component: 1950 - total flux cleaned = 0.0590037 Jy ! Component: 2000 - total flux cleaned = 0.0589016 Jy ! Total flux subtracted in 2048 components = 0.0587021 Jy ! Clean residual min=-0.004948 max=0.007215 Jy/beam ! Clean residual mean=-0.000015 rms=0.002639 Jy/beam ! Combined flux in latest and established models = 0.660752 Jy keep ! Adding 220 model components to the UV plane model. ! The established model now contains 333 components and 0.660752 Jy ![Exited script file: muppet] wmap "J1526-1351_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.835 x 16.04 at 5.544 degrees (North through East) ! Clean map min=-0.01497 max=0.36689 Jy/beam ! Writing clean map to FITS file: J1526-1351_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.366893 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00273664 device "J1526-1351_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1526-1351_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.23769 2.23769 4.47537 8.95075 17.9015 35.803 71.606 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0082 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.366 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.835 x 16.04 at 5.544 degrees (North through East) ! Clean map min=-0.01497 max=0.36689 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1526-1351_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1526-1351_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1526-1351_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 18:46:19 2007