! Started logfile: J1522-2936_S_1997_08_27_yyk_uvs.log on Sun Jan 7 18:45:33 2007 obs J1522-2936_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1522-2936_S_1997_08_27_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.882344 visibilities/baseline/integration-bin. ! Found source: J1522-2936 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 23188 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1522-2936_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.715244 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.662 mas, bmaj=6.236 mas, bpa=-10.47 degrees ! Estimated noise=2537.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.467543 Jy ! Component: 100 - total flux cleaned = 0.592859 Jy ! Total flux subtracted in 100 components = 0.592859 Jy ! Clean residual min=-0.051477 max=0.062387 Jy/beam ! Clean residual mean=-0.000055 rms=0.011913 Jy/beam ! Combined flux in latest and established models = 0.592859 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.592859 Jy ! ! Correcting IF 1. ! A total of 291 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.438358Jy sigma=0.001324 ! Fit after self-cal, rms=0.437892Jy sigma=0.001323 ! Inverting map and beam ! Estimated beam: bmin=2.662 mas, bmaj=6.236 mas, bpa=-10.46 degrees ! Estimated noise=2538.02 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=7.946 mas, bpa=-9.601 degrees ! Estimated noise=1499.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428372 Jy ! Component: 100 - total flux cleaned = 0.047812 Jy ! Component: 150 - total flux cleaned = 0.0487099 Jy ! Component: 200 - total flux cleaned = 0.0495527 Jy ! Total flux subtracted in 200 components = 0.0495527 Jy ! Clean residual min=-0.019450 max=0.027499 Jy/beam ! Clean residual mean=0.000019 rms=0.005415 Jy/beam ! Combined flux in latest and established models = 0.642412 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.642412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431323Jy sigma=0.001303 ! Fit after self-cal, rms=0.430850Jy sigma=0.001302 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.409 x 7.946 at -9.601 degrees (North through East) ! Clean map min=-0.016259 max=0.5158 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01829 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.09 HN 0.94 KP 0.95 ! LA 0.99 MK 0.96 NL 1.00* OV 1.11 ! PT 0.99 SC 0.85 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.980723 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.16 HN 1.01 KP 0.99 ! LA 1.11 MK 1.05 NL 0.97 OV 1.05 ! PT 0.97 SC 0.90 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.07482 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 0.94 KP 0.89 ! LA 0.80 MK 0.79 NL 0.93 OV 0.91 ! PT 1.09 SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01979 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.06 HN 1.26 KP 0.94 ! LA 0.85 MK 0.91 NL 1.03 OV 0.91 ! PT 0.93 SC 0.96 ! ! ! Fit before self-cal, rms=0.430850Jy sigma=0.001302 ! Fit after self-cal, rms=0.419913Jy sigma=0.001284 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.419913Jy sigma=0.001284 ! Fit after self-cal, rms=0.419893Jy sigma=0.001284 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.277 mas, bmaj=7.637 mas, bpa=-9.314 degrees ! Estimated noise=1507.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244334 Jy ! Component: 100 - total flux cleaned = 0.0264213 Jy ! Component: 150 - total flux cleaned = 0.0280749 Jy ! Component: 200 - total flux cleaned = 0.0285535 Jy ! Total flux subtracted in 200 components = 0.0285535 Jy ! Clean residual min=-0.012535 max=0.013458 Jy/beam ! Clean residual mean=-0.000086 rms=0.003229 Jy/beam ! Combined flux in latest and established models = 0.670965 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 0.670965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.418128Jy sigma=0.001278 ! Fit after self-cal, rms=0.418067Jy sigma=0.001278 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.418067Jy sigma=0.001278 ! Fit after self-cal, rms=0.402706Jy sigma=0.001230 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -17.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00699403 Jy ! Component: 100 - total flux cleaned = 0.0051012 Jy ! Component: 150 - total flux cleaned = 0.00466108 Jy ! Component: 200 - total flux cleaned = 0.00425869 Jy ! Total flux subtracted in 200 components = 0.00425869 Jy ! Clean residual min=-0.011204 max=0.010559 Jy/beam ! Clean residual mean=-0.000107 rms=0.002755 Jy/beam ! Combined flux in latest and established models = 0.675224 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 73 components and 0.675224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.401095Jy sigma=0.001225 ! Fit after self-cal, rms=0.398743Jy sigma=0.001218 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.277 x 7.637 at -9.314 degrees (North through East) ! Clean map min=-0.015294 max=0.53027 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.398743Jy sigma=0.001218 ! Fit after self-cal, rms=0.740103Jy sigma=0.001205 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.740103Jy sigma=0.001205 ! Fit after self-cal, rms=0.739849Jy sigma=0.001204 ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=9.005 mas, bpa=-2.006 degrees ! Estimated noise=1538.87 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00646039 Jy ! Component: 100 - total flux cleaned = 0.00730635 Jy ! Component: 150 - total flux cleaned = 0.00755754 Jy ! Component: 200 - total flux cleaned = 0.00778339 Jy ! Total flux subtracted in 200 components = 0.00778339 Jy ! Clean residual min=-0.007427 max=0.007210 Jy/beam ! Clean residual mean=-0.000029 rms=0.001962 Jy/beam ! Combined flux in latest and established models = 0.683007 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 0.683007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.739732Jy sigma=0.001203 ! Fit after self-cal, rms=0.739612Jy sigma=0.001202 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.739612Jy sigma=0.001202 ! Fit after self-cal, rms=0.735362Jy sigma=0.001201 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735362Jy sigma=0.001201 ! Fit after self-cal, rms=0.735341Jy sigma=0.001201 ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=8.906 mas, bpa=-2.153 degrees ! Estimated noise=1533.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262543 Jy ! Component: 100 - total flux cleaned = 0.00303039 Jy ! Component: 150 - total flux cleaned = 0.00321069 Jy ! Component: 200 - total flux cleaned = 0.00336804 Jy ! Total flux subtracted in 200 components = 0.00336804 Jy ! Clean residual min=-0.007047 max=0.006849 Jy/beam ! Clean residual mean=-0.000030 rms=0.001800 Jy/beam ! Combined flux in latest and established models = 0.686375 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.686375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735262Jy sigma=0.001200 ! Fit after self-cal, rms=0.735239Jy sigma=0.001200 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.316 mas, bmaj=20.15 mas, bpa=0.3013 degrees ! Estimated noise=1942.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224009 Jy ! Component: 100 - total flux cleaned = 0.00031397 Jy ! Component: 150 - total flux cleaned = 0.000228915 Jy ! Component: 200 - total flux cleaned = 0.000226997 Jy ! Total flux subtracted in 200 components = 0.000226997 Jy ! Clean residual min=-0.008292 max=0.006329 Jy/beam ! Clean residual mean=-0.000065 rms=0.002147 Jy/beam ! Combined flux in latest and established models = 0.686602 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 118 components and 0.686602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735227Jy sigma=0.001200 ! Fit after self-cal, rms=0.735235Jy sigma=0.001200 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=6.768 mas, bpa=-4.106 degrees ! Estimated noise=2706.77 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.486734 Jy ! Component: 100 - total flux cleaned = 0.601862 Jy ! Component: 150 - total flux cleaned = 0.651301 Jy ! Component: 200 - total flux cleaned = 0.668085 Jy ! Total flux subtracted in 200 components = 0.668085 Jy ! Clean residual min=-0.024189 max=0.020945 Jy/beam ! Clean residual mean=-0.000027 rms=0.005983 Jy/beam ! Combined flux in latest and established models = 0.668086 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.668086 Jy ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=8.906 mas, bpa=-2.153 degrees ! Estimated noise=1533.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123896 Jy ! Component: 100 - total flux cleaned = 0.0128301 Jy ! Component: 150 - total flux cleaned = 0.0128342 Jy ! Component: 200 - total flux cleaned = 0.0131653 Jy ! Total flux subtracted in 200 components = 0.0131653 Jy ! Clean residual min=-0.007620 max=0.007693 Jy/beam ! Clean residual mean=-0.000008 rms=0.002036 Jy/beam ! Combined flux in latest and established models = 0.681251 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 0.681251 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.316 mas, bmaj=20.15 mas, bpa=0.3013 degrees ! Estimated noise=1942.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174826 Jy ! Component: 100 - total flux cleaned = 0.00210281 Jy ! Component: 150 - total flux cleaned = 0.00231957 Jy ! Component: 200 - total flux cleaned = 0.00252873 Jy ! Total flux subtracted in 200 components = 0.00252873 Jy ! Clean residual min=-0.008638 max=0.006493 Jy/beam ! Clean residual mean=-0.000030 rms=0.002261 Jy/beam ! Combined flux in latest and established models = 0.68378 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 70 components and 0.68378 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=8.906 mas, bpa=-2.153 degrees ! Estimated noise=1533.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000855708 Jy ! Component: 100 - total flux cleaned = -0.00110631 Jy ! Component: 150 - total flux cleaned = -0.00111142 Jy ! Component: 200 - total flux cleaned = -0.00132654 Jy ! Total flux subtracted in 200 components = -0.00132654 Jy ! Clean residual min=-0.007146 max=0.007090 Jy/beam ! Clean residual mean=-0.000010 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.682453 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.682453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735930Jy sigma=0.001201 ! Fit after self-cal, rms=0.735135Jy sigma=0.001201 wmodel J1522-2936_S_1997_08_27_yyk\_map.mod ! Writing 81 model components to file: J1522-2936_S_1997_08_27_yyk_map.mod wobs J1522-2936_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1522-2936_S_1997_08_27_yyk_uvs.fits wwins J1522-2936_S_1997_08_27_yyk\_map.win ! wwins: Wrote 3 windows to J1522-2936_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000396516 Jy ! Component: 100 - total flux cleaned = -0.00106268 Jy ! Component: 150 - total flux cleaned = -0.00116869 Jy ! Component: 200 - total flux cleaned = -0.00174864 Jy ! Component: 250 - total flux cleaned = -0.00221032 Jy ! Component: 300 - total flux cleaned = -0.00212203 Jy ! Component: 350 - total flux cleaned = -0.00237972 Jy ! Component: 400 - total flux cleaned = -0.00229622 Jy ! Component: 450 - total flux cleaned = -0.00237766 Jy ! Component: 500 - total flux cleaned = -0.00214431 Jy ! Component: 550 - total flux cleaned = -0.00206832 Jy ! Component: 600 - total flux cleaned = -0.00199133 Jy ! Component: 650 - total flux cleaned = -0.00162777 Jy ! Component: 700 - total flux cleaned = -0.00127491 Jy ! Component: 750 - total flux cleaned = -0.000997663 Jy ! Component: 800 - total flux cleaned = -0.000590162 Jy ! Component: 850 - total flux cleaned = -0.000257307 Jy ! Component: 900 - total flux cleaned = 0.000198774 Jy ! Component: 950 - total flux cleaned = 0.000517976 Jy ! Component: 1000 - total flux cleaned = 0.000831359 Jy ! Component: 1050 - total flux cleaned = 0.00126032 Jy ! Component: 1100 - total flux cleaned = 0.00161989 Jy ! Component: 1150 - total flux cleaned = 0.00179699 Jy ! Component: 1200 - total flux cleaned = 0.00208635 Jy ! Component: 1250 - total flux cleaned = 0.00237036 Jy ! Component: 1300 - total flux cleaned = 0.00265001 Jy ! Component: 1350 - total flux cleaned = 0.00286961 Jy ! Component: 1400 - total flux cleaned = 0.00308538 Jy ! Component: 1450 - total flux cleaned = 0.00335109 Jy ! Component: 1500 - total flux cleaned = 0.00371806 Jy ! Component: 1550 - total flux cleaned = 0.0040284 Jy ! Component: 1600 - total flux cleaned = 0.00443557 Jy ! Component: 1650 - total flux cleaned = 0.00478646 Jy ! Component: 1700 - total flux cleaned = 0.00508325 Jy ! Component: 1750 - total flux cleaned = 0.0053766 Jy ! Component: 1800 - total flux cleaned = 0.00566618 Jy ! Component: 1850 - total flux cleaned = 0.00595122 Jy ! Component: 1900 - total flux cleaned = 0.00613857 Jy ! Component: 1950 - total flux cleaned = 0.00632439 Jy ! Component: 2000 - total flux cleaned = 0.00650743 Jy ! Total flux subtracted in 2048 components = 0.00673376 Jy ! Clean residual min=-0.002350 max=0.003556 Jy/beam ! Clean residual mean=-0.000024 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.689187 Jy keep ! Adding 117 model components to the UV plane model. ! The established model now contains 198 components and 0.689187 Jy ![Exited script file: muppet] wmap "J1522-2936_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.318 x 8.906 at -2.153 degrees (North through East) ! Clean map min=-0.0042538 max=0.56299 Jy/beam ! Writing clean map to FITS file: J1522-2936_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.562992 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000874375 device "J1522-2936_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1522-2936_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.465926 0.465926 0.931852 1.8637 3.72741 7.45482 14.9096 29.8193 59.6385 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.562 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.318 x 8.906 at -2.153 degrees (North through East) ! Clean map min=-0.0042538 max=0.56299 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1522-2936_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1522-2936_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1522-2936_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 18:45:40 2007