! Started logfile: J1512-0905_X_1997_05_07_yyk_uvs.log on Mon Jan  8 06:38:30 2007
obs J1512-0905_X_1997_05_07_yyk_uva.fits
! Reading UV FITS file: J1512-0905_X_1997_05_07_yyk_uva.fits
! AN table 1: 145 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.792031 visibilities/baseline/integration-bin.
! Found source: J1512-0905
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 613 lines of history.
! 
! Reading 20672 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1512-0905_X_1997_05_07_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.07909 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7188 mas, bmaj=1.968 mas, bpa=-4.215 degrees
! Estimated noise=879.116 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.840807 Jy
! Component: 100  -  total flux cleaned = 1.06385 Jy
! Total flux subtracted in 100 components = 1.06385 Jy
! Clean residual min=-0.050396 max=0.134363 Jy/beam
! Clean residual mean=0.000755 rms=0.015300 Jy/beam
! Combined flux in latest and established models = 1.06385 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.06385 Jy
! 
! Correcting IF 1.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.315655Jy  sigma=0.002224
! Fit after  self-cal, rms=0.313381Jy  sigma=0.002212
! Inverting map and beam 
! Estimated beam: bmin=0.7188 mas, bmaj=1.968 mas, bpa=-4.215 degrees
! Estimated noise=879.178 mJy/beam.
! Added new window around map position (-1.2, 2).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.150011 Jy
! Component: 100  -  total flux cleaned = 0.229486 Jy
! Total flux subtracted in 100 components = 0.229486 Jy
! Clean residual min=-0.032597 max=0.056165 Jy/beam
! Clean residual mean=0.000337 rms=0.007931 Jy/beam
! Combined flux in latest and established models = 1.29333 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 1.29333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.240823Jy  sigma=0.001657
! Fit after  self-cal, rms=0.236365Jy  sigma=0.001631
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9295 mas, bmaj=2.475 mas, bpa=-5.405 degrees
! Estimated noise=696.853 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0721852 Jy
! Component: 100  -  total flux cleaned = 0.105784 Jy
! Component: 150  -  total flux cleaned = 0.124091 Jy
! Component: 200  -  total flux cleaned = 0.130955 Jy
! Total flux subtracted in 200 components = 0.130955 Jy
! Clean residual min=-0.018779 max=0.018637 Jy/beam
! Clean residual mean=0.000195 rms=0.004572 Jy/beam
! Combined flux in latest and established models = 1.42429 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 51 components and 1.42429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222185Jy  sigma=0.001518
! Fit after  self-cal, rms=0.220851Jy  sigma=0.001510
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9295 x 2.475 at -5.405 degrees (North through East)
! Clean map  min=-0.017171  max=0.92625 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00658
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        1.01     
!   LA        1.01     MK        1.02     NL        1.03     OV        0.98     
!   PT        0.95     SC        0.90     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00963
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        1.01     
!   LA        0.99     MK        0.98     NL        1.02     OV        1.03     
!   PT        0.91     SC        0.96     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.994072
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.03     KP        1.00     
!   LA        1.01     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.986928
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.06     KP        1.01     
!   LA        1.01     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.220851Jy  sigma=0.001510
! Fit after  self-cal, rms=0.217622Jy  sigma=0.001486
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.217622Jy  sigma=0.001486
! Fit after  self-cal, rms=0.217626Jy  sigma=0.001486
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9264 mas, bmaj=2.453 mas, bpa=-4.718 degrees
! Estimated noise=694.567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275941 Jy
! Component: 100  -  total flux cleaned = 0.00165017 Jy
! Component: 150  -  total flux cleaned = 0.000426177 Jy
! Component: 200  -  total flux cleaned = -0.00032051 Jy
! Total flux subtracted in 200 components = -0.00032051 Jy
! Clean residual min=-0.016658 max=0.012193 Jy/beam
! Clean residual mean=-0.000101 rms=0.003331 Jy/beam
! Combined flux in latest and established models = 1.42397 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 58 components and 1.42397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216659Jy  sigma=0.001480
! Fit after  self-cal, rms=0.216330Jy  sigma=0.001478
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216330Jy  sigma=0.001478
! Fit after  self-cal, rms=0.191445Jy  sigma=0.001309
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209372 Jy
! Component: 100  -  total flux cleaned = 0.00323598 Jy
! Component: 150  -  total flux cleaned = 0.00302 Jy
! Component: 200  -  total flux cleaned = 0.00284076 Jy
! Total flux subtracted in 200 components = 0.00284076 Jy
! Clean residual min=-0.016899 max=0.011318 Jy/beam
! Clean residual mean=-0.000114 rms=0.003140 Jy/beam
! Combined flux in latest and established models = 1.42681 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 63 components and 1.42681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.190737Jy  sigma=0.001304
! Fit after  self-cal, rms=0.186949Jy  sigma=0.001279
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9264 x 2.453 at -4.718 degrees (North through East)
! Clean map  min=-0.014065  max=0.9222 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.186949Jy  sigma=0.001279
! Fit after  self-cal, rms=0.184584Jy  sigma=0.001265
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184584Jy  sigma=0.001265
! Fit after  self-cal, rms=0.183771Jy  sigma=0.001259
! Inverting map and beam 
! Estimated beam: bmin=0.9227 mas, bmaj=2.43 mas, bpa=-4.396 degrees
! Estimated noise=691.575 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000698448 Jy
! Component: 100  -  total flux cleaned = 0.00165253 Jy
! Component: 150  -  total flux cleaned = 0.0014872 Jy
! Component: 200  -  total flux cleaned = 0.0014872 Jy
! Total flux subtracted in 200 components = 0.0014872 Jy
! Clean residual min=-0.015643 max=0.009422 Jy/beam
! Clean residual mean=0.000020 rms=0.002616 Jy/beam
! Combined flux in latest and established models = 1.42829 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 1.42829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183295Jy  sigma=0.001256
! Fit after  self-cal, rms=0.182771Jy  sigma=0.001253
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182771Jy  sigma=0.001253
! Fit after  self-cal, rms=0.182250Jy  sigma=0.001251
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182250Jy  sigma=0.001251
! Fit after  self-cal, rms=0.182180Jy  sigma=0.001251
! Inverting map and beam 
! Estimated beam: bmin=0.9213 mas, bmaj=2.427 mas, bpa=-4.418 degrees
! Estimated noise=690.78 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000348442 Jy
! Component: 100  -  total flux cleaned = 0.00106907 Jy
! Component: 150  -  total flux cleaned = 0.00120062 Jy
! Component: 200  -  total flux cleaned = 0.0012013 Jy
! Total flux subtracted in 200 components = 0.0012013 Jy
! Clean residual min=-0.014689 max=0.008898 Jy/beam
! Clean residual mean=0.000028 rms=0.002488 Jy/beam
! Combined flux in latest and established models = 1.4295 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 1.4295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.181850Jy  sigma=0.001249
! Fit after  self-cal, rms=0.181572Jy  sigma=0.001248
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.395 mas, bmaj=4.338 mas, bpa=6.507 degrees
! Estimated noise=869.34 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0030915 Jy
! Component: 100  -  total flux cleaned = -0.00291831 Jy
! Component: 150  -  total flux cleaned = -0.00252119 Jy
! Component: 200  -  total flux cleaned = -0.00237241 Jy
! Total flux subtracted in 200 components = -0.00237241 Jy
! Clean residual min=-0.009217 max=0.007449 Jy/beam
! Clean residual mean=0.000074 rms=0.002339 Jy/beam
! Combined flux in latest and established models = 1.42712 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 82 components and 1.42712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.181409Jy  sigma=0.001246
! Fit after  self-cal, rms=0.181035Jy  sigma=0.001244
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7157 mas, bmaj=1.948 mas, bpa=-3.624 degrees
! Estimated noise=869.86 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.84799 Jy
! Component: 100  -  total flux cleaned = 1.08568 Jy
! Component: 150  -  total flux cleaned = 1.21322 Jy
! Component: 200  -  total flux cleaned = 1.2903 Jy
! Total flux subtracted in 200 components = 1.2903 Jy
! Clean residual min=-0.019603 max=0.032810 Jy/beam
! Clean residual mean=0.000263 rms=0.005453 Jy/beam
! Combined flux in latest and established models = 1.2903 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 1.2903 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9213 mas, bmaj=2.427 mas, bpa=-4.418 degrees
! Estimated noise=690.78 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0675482 Jy
! Component: 100  -  total flux cleaned = 0.100645 Jy
! Component: 150  -  total flux cleaned = 0.118324 Jy
! Component: 200  -  total flux cleaned = 0.128018 Jy
! Total flux subtracted in 200 components = 0.128018 Jy
! Clean residual min=-0.010491 max=0.008337 Jy/beam
! Clean residual mean=0.000067 rms=0.002369 Jy/beam
! Combined flux in latest and established models = 1.41832 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 54 components and 1.41832 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.395 mas, bmaj=4.338 mas, bpa=6.507 degrees
! Estimated noise=869.34 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00580255 Jy
! Component: 100  -  total flux cleaned = 0.00621068 Jy
! Component: 150  -  total flux cleaned = 0.00642851 Jy
! Component: 200  -  total flux cleaned = 0.00642898 Jy
! Total flux subtracted in 200 components = 0.00642898 Jy
! Clean residual min=-0.006693 max=0.006663 Jy/beam
! Clean residual mean=0.000094 rms=0.002064 Jy/beam
! Combined flux in latest and established models = 1.42475 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 65 components and 1.42475 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9213 mas, bmaj=2.427 mas, bpa=-4.418 degrees
! Estimated noise=690.78 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000465719 Jy
! Component: 100  -  total flux cleaned = -0.000439844 Jy
! Component: 150  -  total flux cleaned = -0.000445058 Jy
! Component: 200  -  total flux cleaned = -0.000446407 Jy
! Total flux subtracted in 200 components = -0.000446407 Jy
! Clean residual min=-0.010393 max=0.008408 Jy/beam
! Clean residual mean=0.000050 rms=0.002286 Jy/beam
! Combined flux in latest and established models = 1.4243 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 76 components and 1.4243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.181403Jy  sigma=0.001246
! Fit after  self-cal, rms=0.180930Jy  sigma=0.001244
wmodel J1512-0905_X_1997_05_07_yyk\_map.mod
! Writing 76 model components to file: J1512-0905_X_1997_05_07_yyk_map.mod
wobs J1512-0905_X_1997_05_07_yyk\_uvs.fits
! Writing UV FITS file: J1512-0905_X_1997_05_07_yyk_uvs.fits
wwins J1512-0905_X_1997_05_07_yyk\_map.win
! wwins: Wrote 2 windows to J1512-0905_X_1997_05_07_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00312885 Jy
! Component: 100  -  total flux cleaned = -0.00482157 Jy
! Component: 150  -  total flux cleaned = -0.00513126 Jy
! Component: 200  -  total flux cleaned = -0.00526732 Jy
! Component: 250  -  total flux cleaned = -0.00513787 Jy
! Component: 300  -  total flux cleaned = -0.005014 Jy
! Component: 350  -  total flux cleaned = -0.00465796 Jy
! Component: 400  -  total flux cleaned = -0.00477241 Jy
! Component: 450  -  total flux cleaned = -0.00455402 Jy
! Component: 500  -  total flux cleaned = -0.00455395 Jy
! Component: 550  -  total flux cleaned = -0.00445037 Jy
! Component: 600  -  total flux cleaned = -0.00415171 Jy
! Component: 650  -  total flux cleaned = -0.00357623 Jy
! Component: 700  -  total flux cleaned = -0.00339015 Jy
! Component: 750  -  total flux cleaned = -0.00320762 Jy
! Component: 800  -  total flux cleaned = -0.00285281 Jy
! Component: 850  -  total flux cleaned = -0.00268048 Jy
! Component: 900  -  total flux cleaned = -0.0023418 Jy
! Component: 950  -  total flux cleaned = -0.00201233 Jy
! Component: 1000  -  total flux cleaned = -0.00177157 Jy
! Component: 1050  -  total flux cleaned = -0.00145765 Jy
! Component: 1100  -  total flux cleaned = -0.00130365 Jy
! Component: 1150  -  total flux cleaned = -0.00107692 Jy
! Component: 1200  -  total flux cleaned = -0.000928647 Jy
! Component: 1250  -  total flux cleaned = -0.000492484 Jy
! Component: 1300  -  total flux cleaned = -0.000279487 Jy
! Component: 1350  -  total flux cleaned = -1.93674e-06 Jy
! Component: 1400  -  total flux cleaned = -4.61433e-06 Jy
! Component: 1450  -  total flux cleaned = 6.20421e-05 Jy
! Component: 1500  -  total flux cleaned = 0.000193619 Jy
! Component: 1550  -  total flux cleaned = 0.000324129 Jy
! Component: 1600  -  total flux cleaned = 0.000452483 Jy
! Component: 1650  -  total flux cleaned = 0.000514814 Jy
! Component: 1700  -  total flux cleaned = 0.000638481 Jy
! Component: 1750  -  total flux cleaned = 0.000818434 Jy
! Component: 1800  -  total flux cleaned = 0.000758718 Jy
! Component: 1850  -  total flux cleaned = 0.000874993 Jy
! Component: 1900  -  total flux cleaned = 0.00081629 Jy
! Component: 1950  -  total flux cleaned = 0.000816294 Jy
! Component: 2000  -  total flux cleaned = 0.000929288 Jy
! Total flux subtracted in 2048 components = 0.00109439 Jy
! Clean residual min=-0.002743 max=0.002790 Jy/beam
! Clean residual mean=0.000025 rms=0.001051 Jy/beam
! Combined flux in latest and established models = 1.4254 Jy
keep
! Adding 122 model components to the UV plane model.
! The established model now contains 198 components and 1.4254 Jy
![Exited script file: muppet]
wmap "J1512-0905_X_1997_05_07_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9213 x 2.427 at -4.418 degrees (North through East)
! Clean map  min=-0.0075686  max=0.92325 Jy/beam
! Writing clean map to FITS file: J1512-0905_X_1997_05_07_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.923249 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00104514 
device "J1512-0905_X_1997_05_07_yyk\_map.eps/VPS"
! Attempting to open device: 'J1512-0905_X_1997_05_07_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.339608 0.339608 0.679215 1.35843 2.71686 5.43372 10.8674 21.7349 43.4698 86.9395
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0031 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.923 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9213 x 2.427 at -4.418 degrees (North through East)
! Clean map  min=-0.0075686  max=0.92325 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1512-0905_X_1997_05_07_yyk\_map.gif/gif"
! Attempting to open device: 'J1512-0905_X_1997_05_07_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1512-0905_X_1997_05_07_yyk_uvs.log closed on Mon Jan  8 06:38:39 2007