! Started logfile: J1512-0905_X_1995_04_19_yyk_uvs.log on Mon Jan 8 06:38:11 2007 obs J1512-0905_X_1995_04_19_yyk_uva.fits ! Reading UV FITS file: J1512-0905_X_1995_04_19_yyk_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.873333 visibilities/baseline/integration-bin. ! Found source: J1512-0905 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 4e+06 1 4e+06 ! 02 2 8.23236e+09 4e+06 1 4e+06 ! 03 3 8.41236e+09 4e+06 1 4e+06 ! 04 4 8.55236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 724 lines of history. ! ! Reading 4716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1512-0905_X_1995_04_19_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.84678 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8433 mas, bmaj=1.901 mas, bpa=2.712 degrees ! Estimated noise=2106.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.45695 Jy ! Component: 100 - total flux cleaned = 1.8303 Jy ! Total flux subtracted in 100 components = 1.8303 Jy ! Clean residual min=-0.083418 max=0.109733 Jy/beam ! Clean residual mean=0.000551 rms=0.022988 Jy/beam ! Combined flux in latest and established models = 1.8303 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.8303 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.455780Jy sigma=0.004261 ! Fit after self-cal, rms=0.453712Jy sigma=0.004250 ! Inverting map and beam ! Estimated beam: bmin=0.8433 mas, bmaj=1.901 mas, bpa=2.712 degrees ! Estimated noise=2106.41 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.086 mas, bmaj=2.596 mas, bpa=-4.917 degrees ! Estimated noise=1099.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.202042 Jy ! Component: 100 - total flux cleaned = 0.262392 Jy ! Component: 150 - total flux cleaned = 0.279369 Jy ! Component: 200 - total flux cleaned = 0.280483 Jy ! Total flux subtracted in 200 components = 0.280483 Jy ! Clean residual min=-0.059485 max=0.072004 Jy/beam ! Clean residual mean=0.001357 rms=0.015434 Jy/beam ! Combined flux in latest and established models = 2.11078 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 2.11078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.409595Jy sigma=0.003696 ! Fit after self-cal, rms=0.409358Jy sigma=0.003695 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.086 x 2.596 at -4.917 degrees (North through East) ! Clean map min=-0.057849 max=1.8047 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.988851 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.07 KP 1.02 ! LA 0.92 MK 0.98 NL 1.11 OV 1.01 ! PT 0.97 SC 1.09 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.995469 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.07 KP 1.02 ! LA 0.90 MK 0.98 NL 1.08 OV 0.99 ! PT 0.97 SC 1.14 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.974478 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.14 KP 0.98 ! LA 0.91 MK 1.00 NL 1.15 OV 1.00 ! PT 0.98 SC 1.15 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.961148 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.14 KP 1.03 ! LA 0.92 MK 0.99 NL 1.13 OV 0.99 ! PT 0.99 SC 1.18 ! ! ! Fit before self-cal, rms=0.409358Jy sigma=0.003695 ! Fit after self-cal, rms=0.387281Jy sigma=0.003524 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.387281Jy sigma=0.003524 ! Fit after self-cal, rms=0.387291Jy sigma=0.003524 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.099 mas, bmaj=2.694 mas, bpa=-6.258 degrees ! Estimated noise=1057.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0671873 Jy ! Component: 100 - total flux cleaned = -0.0829353 Jy ! Component: 150 - total flux cleaned = -0.0849051 Jy ! Component: 200 - total flux cleaned = -0.0851018 Jy ! Total flux subtracted in 200 components = -0.0851018 Jy ! Clean residual min=-0.017446 max=0.017663 Jy/beam ! Clean residual mean=0.000127 rms=0.004412 Jy/beam ! Combined flux in latest and established models = 2.02568 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 2.02568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.379933Jy sigma=0.003443 ! Fit after self-cal, rms=0.379724Jy sigma=0.003443 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.379724Jy sigma=0.003443 ! Fit after self-cal, rms=0.294422Jy sigma=0.002641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151946 Jy ! Component: 100 - total flux cleaned = 0.0177378 Jy ! Component: 150 - total flux cleaned = 0.0182792 Jy ! Component: 200 - total flux cleaned = 0.0186089 Jy ! Total flux subtracted in 200 components = 0.0186089 Jy ! Clean residual min=-0.016950 max=0.018056 Jy/beam ! Clean residual mean=0.000077 rms=0.004513 Jy/beam ! Combined flux in latest and established models = 2.04429 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 2.04429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293586Jy sigma=0.002635 ! Fit after self-cal, rms=0.273532Jy sigma=0.002430 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.099 x 2.694 at -6.258 degrees (North through East) ! Clean map min=-0.016151 max=1.7645 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273532Jy sigma=0.002430 ! Fit after self-cal, rms=0.267231Jy sigma=0.002377 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267231Jy sigma=0.002377 ! Fit after self-cal, rms=0.260312Jy sigma=0.002303 ! Inverting map and beam ! Estimated beam: bmin=1.101 mas, bmaj=2.7 mas, bpa=-6.266 degrees ! Estimated noise=1055.18 mJy/beam. ! Added new window around map position (-1.6, 2.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176334 Jy ! Component: 100 - total flux cleaned = 0.0194143 Jy ! Component: 150 - total flux cleaned = 0.0194349 Jy ! Component: 200 - total flux cleaned = 0.0192022 Jy ! Total flux subtracted in 200 components = 0.0192022 Jy ! Clean residual min=-0.008616 max=0.009891 Jy/beam ! Clean residual mean=-0.000023 rms=0.002758 Jy/beam ! Combined flux in latest and established models = 2.06349 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 2.06349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259079Jy sigma=0.002292 ! Fit after self-cal, rms=0.256070Jy sigma=0.002260 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256070Jy sigma=0.002260 ! Fit after self-cal, rms=0.253127Jy sigma=0.002243 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253127Jy sigma=0.002243 ! Fit after self-cal, rms=0.251797Jy sigma=0.002229 ! Inverting map and beam ! Estimated beam: bmin=1.1 mas, bmaj=2.696 mas, bpa=-6.31 degrees ! Estimated noise=1053.77 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00763491 Jy ! Component: 100 - total flux cleaned = 0.00728197 Jy ! Component: 150 - total flux cleaned = 0.00694613 Jy ! Component: 200 - total flux cleaned = 0.00694721 Jy ! Total flux subtracted in 200 components = 0.00694721 Jy ! Clean residual min=-0.008018 max=0.007331 Jy/beam ! Clean residual mean=-0.000038 rms=0.002204 Jy/beam ! Combined flux in latest and established models = 2.07044 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 2.07044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251443Jy sigma=0.002226 ! Fit after self-cal, rms=0.250732Jy sigma=0.002219 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.451 mas, bmaj=4.633 mas, bpa=16.56 degrees ! Estimated noise=1251.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000546641 Jy ! Component: 100 - total flux cleaned = 0.000250321 Jy ! Component: 150 - total flux cleaned = 9.20385e-05 Jy ! Component: 200 - total flux cleaned = -3.92049e-05 Jy ! Total flux subtracted in 200 components = -3.92049e-05 Jy ! Clean residual min=-0.008842 max=0.007983 Jy/beam ! Clean residual mean=-0.000063 rms=0.002596 Jy/beam ! Combined flux in latest and established models = 2.0704 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 2.0704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250709Jy sigma=0.002218 ! Fit after self-cal, rms=0.250324Jy sigma=0.002214 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8537 mas, bmaj=1.929 mas, bpa=1.49 degrees ! Estimated noise=2089.59 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.44752 Jy ! Component: 100 - total flux cleaned = 1.80612 Jy ! Component: 150 - total flux cleaned = 1.94273 Jy ! Component: 200 - total flux cleaned = 2.00136 Jy ! Total flux subtracted in 200 components = 2.00136 Jy ! Clean residual min=-0.019586 max=0.023858 Jy/beam ! Clean residual mean=0.000082 rms=0.005143 Jy/beam ! Combined flux in latest and established models = 2.00136 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 2.00136 Jy ! Inverting map and beam ! Estimated beam: bmin=1.1 mas, bmaj=2.696 mas, bpa=-6.31 degrees ! Estimated noise=1053.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0387995 Jy ! Component: 100 - total flux cleaned = 0.0563469 Jy ! Component: 150 - total flux cleaned = 0.0661689 Jy ! Component: 200 - total flux cleaned = 0.0686514 Jy ! Total flux subtracted in 200 components = 0.0686514 Jy ! Clean residual min=-0.008134 max=0.007701 Jy/beam ! Clean residual mean=-0.000039 rms=0.002241 Jy/beam ! Combined flux in latest and established models = 2.07001 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 48 components and 2.07001 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.451 mas, bmaj=4.633 mas, bpa=16.56 degrees ! Estimated noise=1251.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190435 Jy ! Component: 100 - total flux cleaned = 0.00190873 Jy ! Component: 150 - total flux cleaned = 0.00191586 Jy ! Component: 200 - total flux cleaned = 0.001921 Jy ! Total flux subtracted in 200 components = 0.001921 Jy ! Clean residual min=-0.008981 max=0.007958 Jy/beam ! Clean residual mean=-0.000083 rms=0.002651 Jy/beam ! Combined flux in latest and established models = 2.07193 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 2.07193 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.1 mas, bmaj=2.696 mas, bpa=-6.31 degrees ! Estimated noise=1053.77 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140684 Jy ! Component: 100 - total flux cleaned = 0.000493733 Jy ! Component: 150 - total flux cleaned = 0.000814069 Jy ! Component: 200 - total flux cleaned = 0.00124319 Jy ! Total flux subtracted in 200 components = 0.00124319 Jy ! Clean residual min=-0.007697 max=0.006447 Jy/beam ! Clean residual mean=-0.000059 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 2.07318 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 2.07318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250109Jy sigma=0.002213 ! Fit after self-cal, rms=0.249878Jy sigma=0.002211 wmodel J1512-0905_X_1995_04_19_yyk\_map.mod ! Writing 69 model components to file: J1512-0905_X_1995_04_19_yyk_map.mod wobs J1512-0905_X_1995_04_19_yyk\_uvs.fits ! Writing UV FITS file: J1512-0905_X_1995_04_19_yyk_uvs.fits wwins J1512-0905_X_1995_04_19_yyk\_map.win ! wwins: Wrote 2 windows to J1512-0905_X_1995_04_19_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00297796 Jy ! Component: 100 - total flux cleaned = -0.00508204 Jy ! Component: 150 - total flux cleaned = -0.00626544 Jy ! Component: 200 - total flux cleaned = -0.00726044 Jy ! Component: 250 - total flux cleaned = -0.00829272 Jy ! Component: 300 - total flux cleaned = -0.00882661 Jy ! Component: 350 - total flux cleaned = -0.009497 Jy ! Component: 400 - total flux cleaned = -0.0102172 Jy ! Component: 450 - total flux cleaned = -0.0107508 Jy ! Component: 500 - total flux cleaned = -0.0113365 Jy ! Component: 550 - total flux cleaned = -0.0119696 Jy ! Component: 600 - total flux cleaned = -0.0125116 Jy ! Component: 650 - total flux cleaned = -0.0131019 Jy ! Component: 700 - total flux cleaned = -0.0134815 Jy ! Component: 750 - total flux cleaned = -0.0139728 Jy ! Component: 800 - total flux cleaned = -0.014034 Jy ! Component: 850 - total flux cleaned = -0.0144378 Jy ! Component: 900 - total flux cleaned = -0.0147173 Jy ! Component: 950 - total flux cleaned = -0.0152082 Jy ! Component: 1000 - total flux cleaned = -0.0155269 Jy ! Component: 1050 - total flux cleaned = -0.0160979 Jy ! Component: 1100 - total flux cleaned = -0.0165046 Jy ! Component: 1150 - total flux cleaned = -0.0169037 Jy ! Component: 1200 - total flux cleaned = -0.0171971 Jy ! Component: 1250 - total flux cleaned = -0.0175803 Jy ! Component: 1300 - total flux cleaned = -0.0178146 Jy ! Component: 1350 - total flux cleaned = -0.0180455 Jy ! Component: 1400 - total flux cleaned = -0.0184523 Jy ! Component: 1450 - total flux cleaned = -0.0186302 Jy ! Component: 1500 - total flux cleaned = -0.018892 Jy ! Component: 1550 - total flux cleaned = -0.0190639 Jy ! Component: 1600 - total flux cleaned = -0.0193601 Jy ! Component: 1650 - total flux cleaned = -0.0196097 Jy ! Component: 1700 - total flux cleaned = -0.0197739 Jy ! Component: 1750 - total flux cleaned = -0.0200564 Jy ! Component: 1800 - total flux cleaned = -0.0201361 Jy ! Component: 1850 - total flux cleaned = -0.0203328 Jy ! Component: 1900 - total flux cleaned = -0.0204491 Jy ! Component: 1950 - total flux cleaned = -0.0203725 Jy ! Component: 2000 - total flux cleaned = -0.0204106 Jy ! Total flux subtracted in 2048 components = -0.0203731 Jy ! Clean residual min=-0.001984 max=0.002174 Jy/beam ! Clean residual mean=-0.000026 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 2.0528 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 204 components and 2.0528 Jy ![Exited script file: muppet] wmap "J1512-0905_X_1995_04_19_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.1 x 2.696 at -6.31 degrees (North through East) ! Clean map min=-0.0049685 max=1.7614 Jy/beam ! Writing clean map to FITS file: J1512-0905_X_1995_04_19_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.7614 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000685439 device "J1512-0905_X_1995_04_19_yyk\_map.eps/VPS" ! Attempting to open device: 'J1512-0905_X_1995_04_19_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.116743 0.116743 0.233487 0.466973 0.933947 1.86789 3.73579 7.47157 14.9431 29.8863 59.7726 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.761 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.1 x 2.696 at -6.31 degrees (North through East) ! Clean map min=-0.0049685 max=1.7614 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1512-0905_X_1995_04_19_yyk\_map.gif/gif" ! Attempting to open device: 'J1512-0905_X_1995_04_19_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1512-0905_X_1995_04_19_yyk_uvs.log closed on Mon Jan 8 06:38:18 2007