! Started logfile: J1512-0905_S_1997_07_02_yyk_uvs.log on Sun Jan 7 18:43:07 2007 obs J1512-0905_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1512-0905_S_1997_07_02_yyk_uva.fits ! AN table 1: 53 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.97652 visibilities/baseline/integration-bin. ! Found source: J1512-0905 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 9316 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1512-0905_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.22364 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=6.933 mas, bpa=-0.2698 degrees ! Estimated noise=3074.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.85709 Jy ! Component: 100 - total flux cleaned = 2.17268 Jy ! Total flux subtracted in 100 components = 2.17268 Jy ! Clean residual min=-0.069033 max=0.121413 Jy/beam ! Clean residual mean=0.006087 rms=0.024692 Jy/beam ! Combined flux in latest and established models = 2.17268 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.17268 Jy ! ! Correcting IF 1. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.451434Jy sigma=0.001774 ! Fit after self-cal, rms=0.450983Jy sigma=0.001772 ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=6.933 mas, bpa=-0.2698 degrees ! Estimated noise=3074.17 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.743 mas, bmaj=8.998 mas, bpa=-3.284 degrees ! Estimated noise=1794.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.085363 Jy ! Component: 100 - total flux cleaned = 0.118802 Jy ! Component: 150 - total flux cleaned = 0.125486 Jy ! Component: 200 - total flux cleaned = 0.126669 Jy ! Total flux subtracted in 200 components = 0.126669 Jy ! Clean residual min=-0.059643 max=0.102426 Jy/beam ! Clean residual mean=0.003050 rms=0.024294 Jy/beam ! Combined flux in latest and established models = 2.29935 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 2.29935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.434688Jy sigma=0.001720 ! Fit after self-cal, rms=0.434659Jy sigma=0.001720 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.743 x 8.998 at -3.284 degrees (North through East) ! Clean map min=-0.05886 max=2.1463 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03107 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.12 HN 0.90 KP 0.89 ! LA 0.99 MK 0.98 NL 1.00* OV 1.10 ! PT 0.95 SC 0.83 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.976717 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.18 HN 1.11 KP 0.94 ! LA 1.09 MK 1.04 NL 0.95 OV 1.05 ! PT 0.94 SC 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.04025 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.09 HN 0.89 KP 0.92 ! LA 0.81 MK 0.90 NL 0.93 OV 0.96 ! PT 1.08 SC 1.07 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.984448 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.15 HN 1.15 KP 0.95 ! LA 0.90 MK 1.07 NL 1.04 OV 0.95 ! PT 0.92 SC 1.04 ! ! ! Fit before self-cal, rms=0.434659Jy sigma=0.001720 ! Fit after self-cal, rms=0.359363Jy sigma=0.001401 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359363Jy sigma=0.001401 ! Fit after self-cal, rms=0.359361Jy sigma=0.001401 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=8.927 mas, bpa=-2.988 degrees ! Estimated noise=1799.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.010821 Jy ! Component: 100 - total flux cleaned = 0.00921962 Jy ! Component: 150 - total flux cleaned = 0.00834011 Jy ! Component: 200 - total flux cleaned = 0.0079588 Jy ! Total flux subtracted in 200 components = 0.0079588 Jy ! Clean residual min=-0.015167 max=0.024929 Jy/beam ! Clean residual mean=0.000478 rms=0.005630 Jy/beam ! Combined flux in latest and established models = 2.30731 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 2.30731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356971Jy sigma=0.001395 ! Fit after self-cal, rms=0.356943Jy sigma=0.001395 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356943Jy sigma=0.001395 ! Fit after self-cal, rms=0.344262Jy sigma=0.001353 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.29508e-05 Jy ! Component: 100 - total flux cleaned = -0.000717371 Jy ! Component: 150 - total flux cleaned = -0.00155588 Jy ! Component: 200 - total flux cleaned = -0.002331 Jy ! Total flux subtracted in 200 components = -0.002331 Jy ! Clean residual min=-0.013548 max=0.024612 Jy/beam ! Clean residual mean=0.000533 rms=0.005608 Jy/beam ! Combined flux in latest and established models = 2.30497 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 2.30497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343377Jy sigma=0.001351 ! Fit after self-cal, rms=0.340404Jy sigma=0.001341 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.766 x 8.927 at -2.988 degrees (North through East) ! Clean map min=-0.01312 max=2.1733 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340404Jy sigma=0.001341 ! Fit after self-cal, rms=0.316686Jy sigma=0.001234 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316686Jy sigma=0.001234 ! Fit after self-cal, rms=0.315669Jy sigma=0.001230 ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=8.922 mas, bpa=-2.966 degrees ! Estimated noise=1796.9 mJy/beam. ! Added new window around map position (-5.5, 30.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270889 Jy ! Component: 100 - total flux cleaned = 0.0361783 Jy ! Component: 150 - total flux cleaned = 0.0390725 Jy ! Component: 200 - total flux cleaned = 0.0400035 Jy ! Total flux subtracted in 200 components = 0.0400035 Jy ! Clean residual min=-0.010257 max=0.010834 Jy/beam ! Clean residual mean=-0.000371 rms=0.003023 Jy/beam ! Combined flux in latest and established models = 2.34498 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 2.34498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313644Jy sigma=0.001221 ! Fit after self-cal, rms=0.313224Jy sigma=0.001220 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313224Jy sigma=0.001220 ! Fit after self-cal, rms=0.312401Jy sigma=0.001218 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312401Jy sigma=0.001218 ! Fit after self-cal, rms=0.312261Jy sigma=0.001217 ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=8.92 mas, bpa=-2.943 degrees ! Estimated noise=1795.87 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.63886e-05 Jy ! Component: 100 - total flux cleaned = 0.000345993 Jy ! Component: 150 - total flux cleaned = 0.000353758 Jy ! Component: 200 - total flux cleaned = 0.000137556 Jy ! Total flux subtracted in 200 components = 0.000137556 Jy ! Clean residual min=-0.009799 max=0.009951 Jy/beam ! Clean residual mean=-0.000432 rms=0.002824 Jy/beam ! Combined flux in latest and established models = 2.34511 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 57 components and 2.34511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311687Jy sigma=0.001216 ! Fit after self-cal, rms=0.311638Jy sigma=0.001216 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.523 mas, bmaj=16.28 mas, bpa=14.95 degrees ! Estimated noise=2158.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275322 Jy ! Component: 100 - total flux cleaned = 0.0030443 Jy ! Component: 150 - total flux cleaned = 0.00294691 Jy ! Component: 200 - total flux cleaned = 0.00285396 Jy ! Total flux subtracted in 200 components = 0.00285396 Jy ! Clean residual min=-0.010507 max=0.008805 Jy/beam ! Clean residual mean=-0.000872 rms=0.003111 Jy/beam ! Combined flux in latest and established models = 2.34797 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 2.34797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311692Jy sigma=0.001216 ! Fit after self-cal, rms=0.311682Jy sigma=0.001216 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=6.883 mas, bpa=0.3768 degrees ! Estimated noise=3058.56 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.85265 Jy ! Component: 100 - total flux cleaned = 2.17914 Jy ! Component: 150 - total flux cleaned = 2.27163 Jy ! Component: 200 - total flux cleaned = 2.31041 Jy ! Total flux subtracted in 200 components = 2.31041 Jy ! Clean residual min=-0.017504 max=0.028873 Jy/beam ! Clean residual mean=0.000100 rms=0.006005 Jy/beam ! Combined flux in latest and established models = 2.31041 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 2.31041 Jy ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=8.92 mas, bpa=-2.943 degrees ! Estimated noise=1795.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244883 Jy ! Component: 100 - total flux cleaned = 0.033866 Jy ! Component: 150 - total flux cleaned = 0.0365812 Jy ! Component: 200 - total flux cleaned = 0.0377408 Jy ! Total flux subtracted in 200 components = 0.0377408 Jy ! Clean residual min=-0.011011 max=0.009902 Jy/beam ! Clean residual mean=-0.000466 rms=0.002850 Jy/beam ! Combined flux in latest and established models = 2.34815 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 46 components and 2.34815 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.523 mas, bmaj=16.28 mas, bpa=14.95 degrees ! Estimated noise=2158.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153308 Jy ! Component: 100 - total flux cleaned = 0.00214149 Jy ! Component: 150 - total flux cleaned = 0.00214395 Jy ! Component: 200 - total flux cleaned = 0.00199877 Jy ! Total flux subtracted in 200 components = 0.00199877 Jy ! Clean residual min=-0.010687 max=0.009110 Jy/beam ! Clean residual mean=-0.000926 rms=0.002987 Jy/beam ! Combined flux in latest and established models = 2.35015 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 2.35015 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=8.92 mas, bpa=-2.943 degrees ! Estimated noise=1795.87 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000743492 Jy ! Component: 100 - total flux cleaned = -0.000748541 Jy ! Component: 150 - total flux cleaned = -0.000759701 Jy ! Component: 200 - total flux cleaned = -0.000766018 Jy ! Total flux subtracted in 200 components = -0.000766018 Jy ! Clean residual min=-0.009489 max=0.009856 Jy/beam ! Clean residual mean=-0.000504 rms=0.002458 Jy/beam ! Combined flux in latest and established models = 2.34938 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 2.34938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310868Jy sigma=0.001213 ! Fit after self-cal, rms=0.310861Jy sigma=0.001213 wmodel J1512-0905_S_1997_07_02_yyk\_map.mod ! Writing 82 model components to file: J1512-0905_S_1997_07_02_yyk_map.mod wobs J1512-0905_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1512-0905_S_1997_07_02_yyk_uvs.fits wwins J1512-0905_S_1997_07_02_yyk\_map.win ! wwins: Wrote 3 windows to J1512-0905_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000728644 Jy ! Component: 100 - total flux cleaned = -0.00311861 Jy ! Component: 150 - total flux cleaned = -0.00448461 Jy ! Component: 200 - total flux cleaned = -0.00549461 Jy ! Component: 250 - total flux cleaned = -0.0064558 Jy ! Component: 300 - total flux cleaned = -0.00748231 Jy ! Component: 350 - total flux cleaned = -0.0079197 Jy ! Component: 400 - total flux cleaned = -0.00823434 Jy ! Component: 450 - total flux cleaned = -0.00792927 Jy ! Component: 500 - total flux cleaned = -0.00753907 Jy ! Component: 550 - total flux cleaned = -0.00734894 Jy ! Component: 600 - total flux cleaned = -0.00697895 Jy ! Component: 650 - total flux cleaned = -0.00635926 Jy ! Component: 700 - total flux cleaned = -0.00618741 Jy ! Component: 750 - total flux cleaned = -0.00568383 Jy ! Component: 800 - total flux cleaned = -0.00544001 Jy ! Component: 850 - total flux cleaned = -0.00543922 Jy ! Component: 900 - total flux cleaned = -0.00528328 Jy ! Component: 950 - total flux cleaned = -0.0052081 Jy ! Component: 1000 - total flux cleaned = -0.00513472 Jy ! Component: 1050 - total flux cleaned = -0.00520632 Jy ! Component: 1100 - total flux cleaned = -0.00506597 Jy ! Component: 1150 - total flux cleaned = -0.00506574 Jy ! Component: 1200 - total flux cleaned = -0.0048647 Jy ! Component: 1250 - total flux cleaned = -0.00479993 Jy ! Component: 1300 - total flux cleaned = -0.00467094 Jy ! Component: 1350 - total flux cleaned = -0.00460645 Jy ! Component: 1400 - total flux cleaned = -0.00435763 Jy ! Component: 1450 - total flux cleaned = -0.00411404 Jy ! Component: 1500 - total flux cleaned = -0.00399519 Jy ! Component: 1550 - total flux cleaned = -0.00387819 Jy ! Component: 1600 - total flux cleaned = -0.00364857 Jy ! Component: 1650 - total flux cleaned = -0.00347772 Jy ! Component: 1700 - total flux cleaned = -0.00308827 Jy ! Component: 1750 - total flux cleaned = -0.00281514 Jy ! Component: 1800 - total flux cleaned = -0.00244007 Jy ! Component: 1850 - total flux cleaned = -0.00238782 Jy ! Component: 1900 - total flux cleaned = -0.00202263 Jy ! Component: 1950 - total flux cleaned = -0.00161227 Jy ! Component: 2000 - total flux cleaned = -0.00151135 Jy ! Total flux subtracted in 2048 components = -0.00131207 Jy ! Clean residual min=-0.002843 max=0.002914 Jy/beam ! Clean residual mean=-0.000110 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 2.34807 Jy keep ! Adding 103 model components to the UV plane model. ! The established model now contains 185 components and 2.34807 Jy ![Exited script file: muppet] wmap "J1512-0905_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.756 x 8.92 at -2.943 degrees (North through East) ! Clean map min=-0.006352 max=2.1775 Jy/beam ! Writing clean map to FITS file: J1512-0905_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.17754 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000992666 device "J1512-0905_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1512-0905_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.13676 0.13676 0.27352 0.547039 1.09408 2.18816 4.37631 8.75263 17.5053 35.0105 70.021 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.177 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.756 x 8.92 at -2.943 degrees (North through East) ! Clean map min=-0.006352 max=2.1775 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1512-0905_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1512-0905_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1512-0905_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 18:43:12 2007