! Started logfile: J1512-0905_S_1995_04_19_yyk_uvs.log on Sun Jan 7 18:42:47 2007 obs J1512-0905_S_1995_04_19_yyk_uva.fits ! Reading UV FITS file: J1512-0905_S_1995_04_19_yyk_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.873333 visibilities/baseline/integration-bin. ! Found source: J1512-0905 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 976 lines of history. ! ! Reading 4716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1512-0905_S_1995_04_19_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.99207 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=6.992 mas, bpa=-0.2761 degrees ! Estimated noise=2915.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.52574 Jy ! Component: 100 - total flux cleaned = 2.88161 Jy ! Total flux subtracted in 100 components = 2.88161 Jy ! Clean residual min=-0.094504 max=0.174159 Jy/beam ! Clean residual mean=0.002215 rms=0.031293 Jy/beam ! Combined flux in latest and established models = 2.88162 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 2.88162 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.487316Jy sigma=0.003057 ! Fit after self-cal, rms=0.486536Jy sigma=0.003052 ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=6.992 mas, bpa=-0.2761 degrees ! Estimated noise=2915.84 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=9.934 mas, bpa=-6.446 degrees ! Estimated noise=1503.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, -25.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.168654 Jy ! Component: 100 - total flux cleaned = 0.237837 Jy ! Component: 150 - total flux cleaned = 0.258503 Jy ! Component: 200 - total flux cleaned = 0.270509 Jy ! Total flux subtracted in 200 components = 0.270509 Jy ! Clean residual min=-0.044651 max=0.068417 Jy/beam ! Clean residual mean=0.002794 rms=0.016981 Jy/beam ! Combined flux in latest and established models = 3.15212 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 43 components and 3.15212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.440293Jy sigma=0.002727 ! Fit after self-cal, rms=0.437677Jy sigma=0.002706 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.942 x 9.934 at -6.446 degrees (North through East) ! Clean map min=-0.046601 max=2.8741 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02072 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.03 KP 0.91 ! LA 0.97 MK 0.97 NL 0.98 OV 1.06 ! PT 0.97 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.981606 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 HN 1.12 KP 0.95 ! LA 1.08 MK 1.01 NL 0.93 OV 1.02 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0178 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.00 KP 0.95 ! LA 0.83 MK 0.93 NL 1.06 OV 0.94 ! PT 1.11 SC 1.08 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.984137 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.12 KP 1.02 ! LA 0.89 MK 1.06 NL 1.05 OV 1.01 ! PT 0.96 SC 0.99 ! ! ! Fit before self-cal, rms=0.437677Jy sigma=0.002706 ! Fit after self-cal, rms=0.354448Jy sigma=0.002158 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354448Jy sigma=0.002158 ! Fit after self-cal, rms=0.354448Jy sigma=0.002158 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.967 mas, bmaj=9.921 mas, bpa=-6.482 degrees ! Estimated noise=1499.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0149628 Jy ! Component: 100 - total flux cleaned = -0.0132099 Jy ! Component: 150 - total flux cleaned = -0.0144632 Jy ! Component: 200 - total flux cleaned = -0.0164595 Jy ! Total flux subtracted in 200 components = -0.0164595 Jy ! Clean residual min=-0.030658 max=0.021886 Jy/beam ! Clean residual mean=0.000020 rms=0.007269 Jy/beam ! Combined flux in latest and established models = 3.13566 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 70 components and 3.13566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351361Jy sigma=0.002137 ! Fit after self-cal, rms=0.351251Jy sigma=0.002136 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351251Jy sigma=0.002136 ! Fit after self-cal, rms=0.330385Jy sigma=0.001994 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00300122 Jy ! Component: 100 - total flux cleaned = -0.00482672 Jy ! Component: 150 - total flux cleaned = -0.00642368 Jy ! Component: 200 - total flux cleaned = -0.00757386 Jy ! Total flux subtracted in 200 components = -0.00757386 Jy ! Clean residual min=-0.028075 max=0.022588 Jy/beam ! Clean residual mean=0.000150 rms=0.007027 Jy/beam ! Combined flux in latest and established models = 3.12809 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 3.12809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329648Jy sigma=0.001990 ! Fit after self-cal, rms=0.325453Jy sigma=0.001960 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.967 x 9.921 at -6.482 degrees (North through East) ! Clean map min=-0.027686 max=2.879 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325453Jy sigma=0.001960 ! Fit after self-cal, rms=0.304315Jy sigma=0.001808 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304315Jy sigma=0.001808 ! Fit after self-cal, rms=0.303042Jy sigma=0.001798 ! Inverting map and beam ! Estimated beam: bmin=3.966 mas, bmaj=9.897 mas, bpa=-6.488 degrees ! Estimated noise=1497.54 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0154057 Jy ! Component: 100 - total flux cleaned = -0.0167921 Jy ! Component: 150 - total flux cleaned = -0.0189411 Jy ! Component: 200 - total flux cleaned = -0.0201313 Jy ! Total flux subtracted in 200 components = -0.0201313 Jy ! Clean residual min=-0.023138 max=0.017999 Jy/beam ! Clean residual mean=-0.000182 rms=0.005664 Jy/beam ! Combined flux in latest and established models = 3.10796 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 111 components and 3.10796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301763Jy sigma=0.001789 ! Fit after self-cal, rms=0.301226Jy sigma=0.001785 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301226Jy sigma=0.001785 ! Fit after self-cal, rms=0.291621Jy sigma=0.001752 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291621Jy sigma=0.001752 ! Fit after self-cal, rms=0.291413Jy sigma=0.001751 ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=9.885 mas, bpa=-6.548 degrees ! Estimated noise=1496.47 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0116826 Jy ! Component: 100 - total flux cleaned = -0.0131079 Jy ! Component: 150 - total flux cleaned = -0.0139553 Jy ! Component: 200 - total flux cleaned = -0.0149498 Jy ! Total flux subtracted in 200 components = -0.0149498 Jy ! Clean residual min=-0.019762 max=0.016323 Jy/beam ! Clean residual mean=-0.000232 rms=0.005002 Jy/beam ! Combined flux in latest and established models = 3.09301 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 128 components and 3.09301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290685Jy sigma=0.001745 ! Fit after self-cal, rms=0.290535Jy sigma=0.001744 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.644 mas, bmaj=16.13 mas, bpa=13.95 degrees ! Estimated noise=1768.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00274579 Jy ! Component: 100 - total flux cleaned = -0.00301145 Jy ! Component: 150 - total flux cleaned = -0.00277685 Jy ! Component: 200 - total flux cleaned = -0.00298052 Jy ! Total flux subtracted in 200 components = -0.00298052 Jy ! Clean residual min=-0.025866 max=0.018097 Jy/beam ! Clean residual mean=-0.000341 rms=0.006660 Jy/beam ! Combined flux in latest and established models = 3.09003 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 140 components and 3.09003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290413Jy sigma=0.001743 ! Fit after self-cal, rms=0.290313Jy sigma=0.001742 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=6.982 mas, bpa=-0.1934 degrees ! Estimated noise=2905.16 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.51923 Jy ! Component: 100 - total flux cleaned = 2.87354 Jy ! Component: 150 - total flux cleaned = 2.98414 Jy ! Component: 200 - total flux cleaned = 3.03712 Jy ! Total flux subtracted in 200 components = 3.03712 Jy ! Clean residual min=-0.024241 max=0.027581 Jy/beam ! Clean residual mean=0.000305 rms=0.007674 Jy/beam ! Combined flux in latest and established models = 3.03712 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 3.03712 Jy ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=9.885 mas, bpa=-6.548 degrees ! Estimated noise=1496.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277757 Jy ! Component: 100 - total flux cleaned = 0.039228 Jy ! Component: 150 - total flux cleaned = 0.043144 Jy ! Component: 200 - total flux cleaned = 0.0451347 Jy ! Total flux subtracted in 200 components = 0.0451347 Jy ! Clean residual min=-0.018984 max=0.017464 Jy/beam ! Clean residual mean=-0.000035 rms=0.005234 Jy/beam ! Combined flux in latest and established models = 3.08225 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 44 components and 3.08225 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.644 mas, bmaj=16.13 mas, bpa=13.95 degrees ! Estimated noise=1768.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161919 Jy ! Component: 100 - total flux cleaned = 0.0022413 Jy ! Component: 150 - total flux cleaned = 0.00242112 Jy ! Component: 200 - total flux cleaned = 0.00257335 Jy ! Total flux subtracted in 200 components = 0.00257335 Jy ! Clean residual min=-0.026229 max=0.018087 Jy/beam ! Clean residual mean=-0.000177 rms=0.006768 Jy/beam ! Combined flux in latest and established models = 3.08483 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 3.08483 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=9.885 mas, bpa=-6.548 degrees ! Estimated noise=1496.47 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110741 Jy ! Component: 100 - total flux cleaned = -0.00132204 Jy ! Component: 150 - total flux cleaned = -0.00153998 Jy ! Component: 200 - total flux cleaned = -0.00133598 Jy ! Total flux subtracted in 200 components = -0.00133598 Jy ! Clean residual min=-0.018484 max=0.016383 Jy/beam ! Clean residual mean=-0.000076 rms=0.004957 Jy/beam ! Combined flux in latest and established models = 3.08349 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 3.08349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290428Jy sigma=0.001743 ! Fit after self-cal, rms=0.290258Jy sigma=0.001742 wmodel J1512-0905_S_1995_04_19_yyk\_map.mod ! Writing 70 model components to file: J1512-0905_S_1995_04_19_yyk_map.mod wobs J1512-0905_S_1995_04_19_yyk\_uvs.fits ! Writing UV FITS file: J1512-0905_S_1995_04_19_yyk_uvs.fits wwins J1512-0905_S_1995_04_19_yyk\_map.win ! wwins: Wrote 2 windows to J1512-0905_S_1995_04_19_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00389279 Jy ! Component: 100 - total flux cleaned = -0.00569938 Jy ! Component: 150 - total flux cleaned = -0.00570578 Jy ! Component: 200 - total flux cleaned = -0.005084 Jy ! Component: 250 - total flux cleaned = -0.0044921 Jy ! Component: 300 - total flux cleaned = -0.00468791 Jy ! Component: 350 - total flux cleaned = -0.00522123 Jy ! Component: 400 - total flux cleaned = -0.00539123 Jy ! Component: 450 - total flux cleaned = -0.00539645 Jy ! Component: 500 - total flux cleaned = -0.00554727 Jy ! Component: 550 - total flux cleaned = -0.00598119 Jy ! Component: 600 - total flux cleaned = -0.006257 Jy ! Component: 650 - total flux cleaned = -0.00705633 Jy ! Component: 700 - total flux cleaned = -0.00756419 Jy ! Component: 750 - total flux cleaned = -0.00793246 Jy ! Component: 800 - total flux cleaned = -0.00840566 Jy ! Component: 850 - total flux cleaned = -0.00908646 Jy ! Component: 900 - total flux cleaned = -0.00919596 Jy ! Component: 950 - total flux cleaned = -0.00951679 Jy ! Component: 1000 - total flux cleaned = -0.00961986 Jy ! Component: 1050 - total flux cleaned = -0.0096223 Jy ! Component: 1100 - total flux cleaned = -0.00971916 Jy ! Component: 1150 - total flux cleaned = -0.0098092 Jy ! Component: 1200 - total flux cleaned = -0.00971933 Jy ! Component: 1250 - total flux cleaned = -0.00997998 Jy ! Component: 1300 - total flux cleaned = -0.0102299 Jy ! Component: 1350 - total flux cleaned = -0.0106335 Jy ! Component: 1400 - total flux cleaned = -0.0110263 Jy ! Component: 1450 - total flux cleaned = -0.0116396 Jy ! Component: 1500 - total flux cleaned = -0.0123111 Jy ! Component: 1550 - total flux cleaned = -0.012893 Jy ! Component: 1600 - total flux cleaned = -0.0133917 Jy ! Component: 1650 - total flux cleaned = -0.0140184 Jy ! Component: 1700 - total flux cleaned = -0.014629 Jy ! Component: 1750 - total flux cleaned = -0.0152283 Jy ! Component: 1800 - total flux cleaned = -0.0160743 Jy ! Component: 1850 - total flux cleaned = -0.0169014 Jy ! Component: 1900 - total flux cleaned = -0.017653 Jy ! Component: 1950 - total flux cleaned = -0.0187586 Jy ! Component: 2000 - total flux cleaned = -0.0196015 Jy ! Total flux subtracted in 2048 components = -0.0206086 Jy ! Clean residual min=-0.003802 max=0.003343 Jy/beam ! Clean residual mean=-0.000205 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 3.06288 Jy keep ! Adding 157 model components to the UV plane model. ! The established model now contains 227 components and 3.06288 Jy ![Exited script file: muppet] wmap "J1512-0905_S_1995_04_19_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.964 x 9.885 at -6.548 degrees (North through East) ! Clean map min=-0.011876 max=2.8918 Jy/beam ! Writing clean map to FITS file: J1512-0905_S_1995_04_19_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.89178 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00126217 device "J1512-0905_S_1995_04_19_yyk\_map.eps/VPS" ! Attempting to open device: 'J1512-0905_S_1995_04_19_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.130941 0.130941 0.261882 0.523764 1.04753 2.09506 4.19011 8.38022 16.7604 33.5209 67.0418 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.891 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.964 x 9.885 at -6.548 degrees (North through East) ! Clean map min=-0.011876 max=2.8918 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1512-0905_S_1995_04_19_yyk\_map.gif/gif" ! Attempting to open device: 'J1512-0905_S_1995_04_19_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1512-0905_S_1995_04_19_yyk_uvs.log closed on Sun Jan 7 18:42:52 2007