! Started logfile: J1448-1122_X_1997_05_07_yyk_uvs.log on Mon Jan 8 06:32:09 2007 obs J1448-1122_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1448-1122_X_1997_05_07_yyk_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.724228 visibilities/baseline/integration-bin. ! Found source: J1448-1122 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 18772 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1448-1122_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.225884 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7013 mas, bmaj=2.132 mas, bpa=-2.1 degrees ! Estimated noise=1152.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.109093 Jy ! Component: 100 - total flux cleaned = 0.130066 Jy ! Total flux subtracted in 100 components = 0.130066 Jy ! Clean residual min=-0.004868 max=0.006446 Jy/beam ! Clean residual mean=0.000064 rms=0.001531 Jy/beam ! Combined flux in latest and established models = 0.130066 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.130066 Jy ! ! Correcting IF 1. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.183410Jy sigma=0.001232 ! Fit after self-cal, rms=0.183333Jy sigma=0.001232 ! Inverting map and beam ! Estimated beam: bmin=0.7013 mas, bmaj=2.132 mas, bpa=-2.1 degrees ! Estimated noise=1152.3 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9469 mas, bmaj=2.482 mas, bpa=-3.272 degrees ! Estimated noise=741.649 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108259 Jy ! Component: 100 - total flux cleaned = 0.015281 Jy ! Component: 150 - total flux cleaned = 0.0174335 Jy ! Component: 200 - total flux cleaned = 0.0184836 Jy ! Total flux subtracted in 200 components = 0.0184836 Jy ! Clean residual min=-0.003811 max=0.004215 Jy/beam ! Clean residual mean=0.000042 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.148549 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 35 components and 0.148549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182978Jy sigma=0.001229 ! Fit after self-cal, rms=0.182972Jy sigma=0.001229 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9469 x 2.482 at -3.272 degrees (North through East) ! Clean map min=-0.0036316 max=0.12714 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.0093 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 0.98 ! LA 1.01 MK 1.00 NL 1.06 OV 1.05 ! PT 0.90 SC 0.96 ! ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.995387 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.03 KP 1.05 ! LA 0.99 MK 1.03 NL 1.00 OV 0.97 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.997094 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.10 KP 1.00 ! LA 1.04 MK 0.96 NL 1.01 OV 0.98 ! PT 0.99 SC 1.05 ! ! ! Fit before self-cal, rms=0.182972Jy sigma=0.001229 ! Fit after self-cal, rms=0.182312Jy sigma=0.001228 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182312Jy sigma=0.001228 ! Fit after self-cal, rms=0.182312Jy sigma=0.001228 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9519 mas, bmaj=2.479 mas, bpa=-3.223 degrees ! Estimated noise=738.596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258234 Jy ! Component: 100 - total flux cleaned = -0.000167597 Jy ! Component: 150 - total flux cleaned = -9.22759e-05 Jy ! Component: 200 - total flux cleaned = 3.34142e-06 Jy ! Total flux subtracted in 200 components = 3.34142e-06 Jy ! Clean residual min=-0.003274 max=0.003379 Jy/beam ! Clean residual mean=0.000023 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.148553 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.148553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182293Jy sigma=0.001228 ! Fit after self-cal, rms=0.182292Jy sigma=0.001228 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182292Jy sigma=0.001228 ! Fit after self-cal, rms=0.181587Jy sigma=0.001223 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402529 Jy ! Component: 100 - total flux cleaned = 0.000468526 Jy ! Component: 150 - total flux cleaned = 0.000528579 Jy ! Component: 200 - total flux cleaned = 0.000582372 Jy ! Total flux subtracted in 200 components = 0.000582372 Jy ! Clean residual min=-0.003446 max=0.003093 Jy/beam ! Clean residual mean=0.000022 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.149135 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.149135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181577Jy sigma=0.001223 ! Fit after self-cal, rms=0.181471Jy sigma=0.001222 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9519 x 2.479 at -3.223 degrees (North through East) ! Clean map min=-0.003263 max=0.12659 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181471Jy sigma=0.001222 ! Fit after self-cal, rms=0.179196Jy sigma=0.001222 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179196Jy sigma=0.001222 ! Fit after self-cal, rms=0.179179Jy sigma=0.001222 ! Inverting map and beam ! Estimated beam: bmin=0.9507 mas, bmaj=2.446 mas, bpa=-2.42 degrees ! Estimated noise=730.129 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000615995 Jy ! Component: 100 - total flux cleaned = -0.000476578 Jy ! Component: 150 - total flux cleaned = -0.000364991 Jy ! Component: 200 - total flux cleaned = -0.000292837 Jy ! Total flux subtracted in 200 components = -0.000292837 Jy ! Clean residual min=-0.003382 max=0.003031 Jy/beam ! Clean residual mean=0.000033 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.148842 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.148842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179163Jy sigma=0.001222 ! Fit after self-cal, rms=0.179160Jy sigma=0.001222 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179160Jy sigma=0.001222 ! Fit after self-cal, rms=0.179359Jy sigma=0.001220 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179359Jy sigma=0.001220 ! Fit after self-cal, rms=0.179359Jy sigma=0.001220 ! Inverting map and beam ! Estimated beam: bmin=0.9559 mas, bmaj=2.452 mas, bpa=-2.325 degrees ! Estimated noise=726.86 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000952589 Jy ! Component: 100 - total flux cleaned = -0.000975397 Jy ! Component: 150 - total flux cleaned = -0.000957587 Jy ! Component: 200 - total flux cleaned = -0.000923644 Jy ! Total flux subtracted in 200 components = -0.000923644 Jy ! Clean residual min=-0.003421 max=0.002960 Jy/beam ! Clean residual mean=0.000036 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.147919 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.147919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179349Jy sigma=0.001220 ! Fit after self-cal, rms=0.179347Jy sigma=0.001220 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=4.534 mas, bpa=9.525 degrees ! Estimated noise=896.011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000499592 Jy ! Component: 100 - total flux cleaned = 0.000572611 Jy ! Component: 150 - total flux cleaned = 0.000655382 Jy ! Component: 200 - total flux cleaned = 0.000711259 Jy ! Total flux subtracted in 200 components = 0.000711259 Jy ! Clean residual min=-0.003196 max=0.002990 Jy/beam ! Clean residual mean=0.000064 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.14863 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 56 components and 0.14863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179344Jy sigma=0.001220 ! Fit after self-cal, rms=0.179339Jy sigma=0.001220 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7049 mas, bmaj=2.121 mas, bpa=-1.752 degrees ! Estimated noise=1135.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.1086 Jy ! Component: 100 - total flux cleaned = 0.128928 Jy ! Component: 150 - total flux cleaned = 0.136166 Jy ! Component: 200 - total flux cleaned = 0.140387 Jy ! Total flux subtracted in 200 components = 0.140387 Jy ! Clean residual min=-0.004711 max=0.005225 Jy/beam ! Clean residual mean=0.000030 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.140387 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.140387 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9559 mas, bmaj=2.452 mas, bpa=-2.325 degrees ! Estimated noise=726.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00412948 Jy ! Component: 100 - total flux cleaned = 0.006014 Jy ! Component: 150 - total flux cleaned = 0.00656943 Jy ! Component: 200 - total flux cleaned = 0.00676962 Jy ! Total flux subtracted in 200 components = 0.00676962 Jy ! Clean residual min=-0.003437 max=0.003049 Jy/beam ! Clean residual mean=0.000040 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.147157 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.147157 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=4.534 mas, bpa=9.525 degrees ! Estimated noise=896.011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000887564 Jy ! Component: 100 - total flux cleaned = 0.00101934 Jy ! Component: 150 - total flux cleaned = 0.00110618 Jy ! Component: 200 - total flux cleaned = 0.00120832 Jy ! Total flux subtracted in 200 components = 0.00120832 Jy ! Clean residual min=-0.003230 max=0.003012 Jy/beam ! Clean residual mean=0.000067 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.148365 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.148365 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9559 mas, bmaj=2.452 mas, bpa=-2.325 degrees ! Estimated noise=726.86 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000358569 Jy ! Component: 100 - total flux cleaned = -0.000384191 Jy ! Component: 150 - total flux cleaned = -0.000407281 Jy ! Component: 200 - total flux cleaned = -0.00042725 Jy ! Total flux subtracted in 200 components = -0.00042725 Jy ! Clean residual min=-0.003448 max=0.002934 Jy/beam ! Clean residual mean=0.000036 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.147938 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.147938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179344Jy sigma=0.001220 ! Fit after self-cal, rms=0.179336Jy sigma=0.001220 wmodel J1448-1122_X_1997_05_07_yyk\_map.mod ! Writing 48 model components to file: J1448-1122_X_1997_05_07_yyk_map.mod wobs J1448-1122_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1448-1122_X_1997_05_07_yyk_uvs.fits wwins J1448-1122_X_1997_05_07_yyk\_map.win ! wwins: Wrote 1 windows to J1448-1122_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142181 Jy ! Component: 100 - total flux cleaned = -0.00218228 Jy ! Component: 150 - total flux cleaned = -0.00258948 Jy ! Component: 200 - total flux cleaned = -0.00278313 Jy ! Component: 250 - total flux cleaned = -0.00296869 Jy ! Component: 300 - total flux cleaned = -0.00314897 Jy ! Component: 350 - total flux cleaned = -0.00323722 Jy ! Component: 400 - total flux cleaned = -0.00336528 Jy ! Component: 450 - total flux cleaned = -0.00349021 Jy ! Component: 500 - total flux cleaned = -0.00357157 Jy ! Component: 550 - total flux cleaned = -0.00361248 Jy ! Component: 600 - total flux cleaned = -0.00380782 Jy ! Component: 650 - total flux cleaned = -0.00384559 Jy ! Component: 700 - total flux cleaned = -0.003883 Jy ! Component: 750 - total flux cleaned = -0.00399337 Jy ! Component: 800 - total flux cleaned = -0.00410125 Jy ! Component: 850 - total flux cleaned = -0.00420794 Jy ! Component: 900 - total flux cleaned = -0.00427775 Jy ! Component: 950 - total flux cleaned = -0.00431249 Jy ! Component: 1000 - total flux cleaned = -0.00441424 Jy ! Component: 1050 - total flux cleaned = -0.0045474 Jy ! Component: 1100 - total flux cleaned = -0.00471119 Jy ! Component: 1150 - total flux cleaned = -0.00471136 Jy ! Component: 1200 - total flux cleaned = -0.00480748 Jy ! Component: 1250 - total flux cleaned = -0.00480835 Jy ! Component: 1300 - total flux cleaned = -0.00490162 Jy ! Component: 1350 - total flux cleaned = -0.0049017 Jy ! Component: 1400 - total flux cleaned = -0.00499289 Jy ! Component: 1450 - total flux cleaned = -0.00499291 Jy ! Component: 1500 - total flux cleaned = -0.0050221 Jy ! Component: 1550 - total flux cleaned = -0.0050512 Jy ! Component: 1600 - total flux cleaned = -0.00502233 Jy ! Component: 1650 - total flux cleaned = -0.00502287 Jy ! Component: 1700 - total flux cleaned = -0.00507914 Jy ! Component: 1750 - total flux cleaned = -0.00510708 Jy ! Component: 1800 - total flux cleaned = -0.00516164 Jy ! Component: 1850 - total flux cleaned = -0.00527012 Jy ! Component: 1900 - total flux cleaned = -0.00532411 Jy ! Component: 1950 - total flux cleaned = -0.00548357 Jy ! Component: 2000 - total flux cleaned = -0.00550986 Jy ! Total flux subtracted in 2048 components = -0.00563986 Jy ! Clean residual min=-0.001522 max=0.001589 Jy/beam ! Clean residual mean=0.000020 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.142298 Jy keep ! Adding 143 model components to the UV plane model. ! The established model now contains 191 components and 0.142298 Jy ![Exited script file: muppet] wmap "J1448-1122_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9559 x 2.452 at -2.325 degrees (North through East) ! Clean map min=-0.0024869 max=0.12437 Jy/beam ! Writing clean map to FITS file: J1448-1122_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124372 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000508108 device "J1448-1122_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1448-1122_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22561 1.22561 2.45122 4.90245 9.8049 19.6098 39.2196 78.4392 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9559 x 2.452 at -2.325 degrees (North through East) ! Clean map min=-0.0024869 max=0.12437 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1448-1122_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1448-1122_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1448-1122_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 06:32:17 2007