! Started logfile: J1438-2204_S_1997_07_02_yyk_uvs.log on Sun Jan 7 18:36:55 2007 obs J1438-2204_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1438-2204_S_1997_07_02_yyk_uva.fits ! AN table 1: 140 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.912381 visibilities/baseline/integration-bin. ! Found source: J1438-2204 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 22992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1438-2204_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.51957 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.712 mas, bmaj=6.608 mas, bpa=-2.582 degrees ! Estimated noise=2552.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.317459 Jy ! Component: 100 - total flux cleaned = 0.392663 Jy ! Total flux subtracted in 100 components = 0.392663 Jy ! Clean residual min=-0.014313 max=0.022605 Jy/beam ! Clean residual mean=0.000100 rms=0.004865 Jy/beam ! Combined flux in latest and established models = 0.392663 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.392663 Jy ! ! Correcting IF 1. ! A total of 263 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.343302Jy sigma=0.001222 ! Fit after self-cal, rms=0.341784Jy sigma=0.001219 ! Inverting map and beam ! Estimated beam: bmin=2.712 mas, bmaj=6.608 mas, bpa=-2.582 degrees ! Estimated noise=2553.01 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.55 mas, bmaj=8.921 mas, bpa=-5.164 degrees ! Estimated noise=1215.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412029 Jy ! Component: 100 - total flux cleaned = 0.0538386 Jy ! Component: 150 - total flux cleaned = 0.0558849 Jy ! Component: 200 - total flux cleaned = 0.0565306 Jy ! Total flux subtracted in 200 components = 0.0565306 Jy ! Clean residual min=-0.013340 max=0.018729 Jy/beam ! Clean residual mean=0.000348 rms=0.004357 Jy/beam ! Combined flux in latest and established models = 0.449194 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 27 components and 0.449194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.338622Jy sigma=0.001205 ! Fit after self-cal, rms=0.338591Jy sigma=0.001205 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.55 x 8.921 at -5.164 degrees (North through East) ! Clean map min=-0.01319 max=0.38018 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02472 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.09 HN 0.99 KP 0.90 ! LA 0.97 MK 1.00 NL 1.00* OV 1.10 ! PT 0.93 SC 0.82 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.978466 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.17 HN 1.07 KP 0.93 ! LA 1.09 MK 1.04 NL 1.00 OV 1.09 ! PT 0.92 SC 0.88 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03306 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.09 HN 1.05 KP 0.91 ! LA 0.81 MK 0.88 NL 0.96 OV 0.96 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.976817 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.11 HN 1.27 KP 0.94 ! LA 0.89 MK 1.02 NL 1.11 OV 0.97 ! PT 0.91 SC 0.99 ! ! ! Fit before self-cal, rms=0.338591Jy sigma=0.001205 ! Fit after self-cal, rms=0.332328Jy sigma=0.001191 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332328Jy sigma=0.001191 ! Fit after self-cal, rms=0.332332Jy sigma=0.001191 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.524 mas, bmaj=8.726 mas, bpa=-4.167 degrees ! Estimated noise=1205.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, 2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162555 Jy ! Component: 100 - total flux cleaned = 0.0168293 Jy ! Component: 150 - total flux cleaned = 0.017065 Jy ! Component: 200 - total flux cleaned = 0.0170632 Jy ! Total flux subtracted in 200 components = 0.0170632 Jy ! Clean residual min=-0.006197 max=0.007498 Jy/beam ! Clean residual mean=0.000037 rms=0.002000 Jy/beam ! Combined flux in latest and established models = 0.466257 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 52 components and 0.466257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331589Jy sigma=0.001189 ! Fit after self-cal, rms=0.331497Jy sigma=0.001188 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331497Jy sigma=0.001188 ! Fit after self-cal, rms=0.330078Jy sigma=0.001182 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00541512 Jy ! Component: 100 - total flux cleaned = 0.00589417 Jy ! Component: 150 - total flux cleaned = 0.0058942 Jy ! Component: 200 - total flux cleaned = 0.00601771 Jy ! Total flux subtracted in 200 components = 0.00601771 Jy ! Clean residual min=-0.005386 max=0.006419 Jy/beam ! Clean residual mean=0.000021 rms=0.001886 Jy/beam ! Combined flux in latest and established models = 0.472275 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 66 components and 0.472275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329875Jy sigma=0.001182 ! Fit after self-cal, rms=0.329654Jy sigma=0.001181 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.524 x 8.726 at -4.167 degrees (North through East) ! Clean map min=-0.0053498 max=0.37799 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329654Jy sigma=0.001181 ! Fit after self-cal, rms=0.346253Jy sigma=0.001175 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346253Jy sigma=0.001175 ! Fit after self-cal, rms=0.346224Jy sigma=0.001175 ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=8.668 mas, bpa=-4.613 degrees ! Estimated noise=1196.31 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00551785 Jy ! Component: 100 - total flux cleaned = 0.00578759 Jy ! Component: 150 - total flux cleaned = 0.00568261 Jy ! Component: 200 - total flux cleaned = 0.00559032 Jy ! Total flux subtracted in 200 components = 0.00559032 Jy ! Clean residual min=-0.004878 max=0.005382 Jy/beam ! Clean residual mean=0.000024 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 0.477865 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 0.477865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346113Jy sigma=0.001175 ! Fit after self-cal, rms=0.346102Jy sigma=0.001175 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346102Jy sigma=0.001175 ! Fit after self-cal, rms=0.346121Jy sigma=0.001173 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346121Jy sigma=0.001173 ! Fit after self-cal, rms=0.346127Jy sigma=0.001173 ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.648 mas, bpa=-4.472 degrees ! Estimated noise=1197.22 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304332 Jy ! Component: 100 - total flux cleaned = 0.00312927 Jy ! Component: 150 - total flux cleaned = 0.00328096 Jy ! Component: 200 - total flux cleaned = 0.0033508 Jy ! Total flux subtracted in 200 components = 0.0033508 Jy ! Clean residual min=-0.004811 max=0.005234 Jy/beam ! Clean residual mean=0.000035 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.481216 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 95 components and 0.481216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346081Jy sigma=0.001173 ! Fit after self-cal, rms=0.346082Jy sigma=0.001173 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.652 mas, bmaj=18.05 mas, bpa=3.246 degrees ! Estimated noise=1489.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000766813 Jy ! Component: 100 - total flux cleaned = 0.000738641 Jy ! Component: 150 - total flux cleaned = 0.000623269 Jy ! Component: 200 - total flux cleaned = 0.000514223 Jy ! Total flux subtracted in 200 components = 0.000514223 Jy ! Clean residual min=-0.005883 max=0.006755 Jy/beam ! Clean residual mean=0.000074 rms=0.001961 Jy/beam ! Combined flux in latest and established models = 0.48173 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 106 components and 0.48173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346074Jy sigma=0.001173 ! Fit after self-cal, rms=0.346078Jy sigma=0.001173 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.686 mas, bmaj=6.521 mas, bpa=-2.173 degrees ! Estimated noise=2529.67 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.317575 Jy ! Component: 100 - total flux cleaned = 0.394723 Jy ! Component: 150 - total flux cleaned = 0.427829 Jy ! Component: 200 - total flux cleaned = 0.44817 Jy ! Total flux subtracted in 200 components = 0.44817 Jy ! Clean residual min=-0.007726 max=0.012284 Jy/beam ! Clean residual mean=0.000006 rms=0.002482 Jy/beam ! Combined flux in latest and established models = 0.44817 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.44817 Jy ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.648 mas, bpa=-4.472 degrees ! Estimated noise=1197.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183291 Jy ! Component: 100 - total flux cleaned = 0.0268887 Jy ! Component: 150 - total flux cleaned = 0.0310961 Jy ! Component: 200 - total flux cleaned = 0.0319126 Jy ! Total flux subtracted in 200 components = 0.0319126 Jy ! Clean residual min=-0.005150 max=0.005233 Jy/beam ! Clean residual mean=0.000023 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 0.480083 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 75 components and 0.480083 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.652 mas, bmaj=18.05 mas, bpa=3.246 degrees ! Estimated noise=1489.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230918 Jy ! Component: 100 - total flux cleaned = 0.00241647 Jy ! Component: 150 - total flux cleaned = 0.00232695 Jy ! Component: 200 - total flux cleaned = 0.00217121 Jy ! Total flux subtracted in 200 components = 0.00217121 Jy ! Clean residual min=-0.006308 max=0.006211 Jy/beam ! Clean residual mean=0.000050 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 0.482254 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.482254 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.648 mas, bpa=-4.472 degrees ! Estimated noise=1197.22 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.78511e-05 Jy ! Component: 100 - total flux cleaned = 0.000182105 Jy ! Component: 150 - total flux cleaned = 0.000289739 Jy ! Component: 200 - total flux cleaned = 0.000292559 Jy ! Total flux subtracted in 200 components = 0.000292559 Jy ! Clean residual min=-0.004881 max=0.005072 Jy/beam ! Clean residual mean=0.000024 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.482546 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 107 components and 0.482546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346099Jy sigma=0.001173 ! Fit after self-cal, rms=0.346107Jy sigma=0.001173 wmodel J1438-2204_S_1997_07_02_yyk\_map.mod ! Writing 107 model components to file: J1438-2204_S_1997_07_02_yyk_map.mod wobs J1438-2204_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1438-2204_S_1997_07_02_yyk_uvs.fits wwins J1438-2204_S_1997_07_02_yyk\_map.win ! wwins: Wrote 3 windows to J1438-2204_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015655 Jy ! Component: 100 - total flux cleaned = 0.00248833 Jy ! Component: 150 - total flux cleaned = 0.0028799 Jy ! Component: 200 - total flux cleaned = 0.00332147 Jy ! Component: 250 - total flux cleaned = 0.00366892 Jy ! Component: 300 - total flux cleaned = 0.00380309 Jy ! Component: 350 - total flux cleaned = 0.00418509 Jy ! Component: 400 - total flux cleaned = 0.00436817 Jy ! Component: 450 - total flux cleaned = 0.00460493 Jy ! Component: 500 - total flux cleaned = 0.00489195 Jy ! Component: 550 - total flux cleaned = 0.00511499 Jy ! Component: 600 - total flux cleaned = 0.00533244 Jy ! Component: 650 - total flux cleaned = 0.00575672 Jy ! Component: 700 - total flux cleaned = 0.00606708 Jy ! Component: 750 - total flux cleaned = 0.00647053 Jy ! Component: 800 - total flux cleaned = 0.00676748 Jy ! Component: 850 - total flux cleaned = 0.00705749 Jy ! Component: 900 - total flux cleaned = 0.00738697 Jy ! Component: 950 - total flux cleaned = 0.00766334 Jy ! Component: 1000 - total flux cleaned = 0.00797867 Jy ! Component: 1050 - total flux cleaned = 0.00815597 Jy ! Component: 1100 - total flux cleaned = 0.00837339 Jy ! Component: 1150 - total flux cleaned = 0.00841717 Jy ! Component: 1200 - total flux cleaned = 0.00858466 Jy ! Component: 1250 - total flux cleaned = 0.00862587 Jy ! Component: 1300 - total flux cleaned = 0.00866667 Jy ! Component: 1350 - total flux cleaned = 0.00858725 Jy ! Component: 1400 - total flux cleaned = 0.00870471 Jy ! Component: 1450 - total flux cleaned = 0.00862723 Jy ! Component: 1500 - total flux cleaned = 0.00858954 Jy ! Component: 1550 - total flux cleaned = 0.00855247 Jy ! Component: 1600 - total flux cleaned = 0.00851598 Jy ! Component: 1650 - total flux cleaned = 0.00847956 Jy ! Component: 1700 - total flux cleaned = 0.00844367 Jy ! Component: 1750 - total flux cleaned = 0.00844333 Jy ! Component: 1800 - total flux cleaned = 0.00847814 Jy ! Component: 1850 - total flux cleaned = 0.00847799 Jy ! Component: 1900 - total flux cleaned = 0.00854601 Jy ! Component: 1950 - total flux cleaned = 0.00854588 Jy ! Component: 2000 - total flux cleaned = 0.00854565 Jy ! Total flux subtracted in 2048 components = 0.00848048 Jy ! Clean residual min=-0.001881 max=0.002657 Jy/beam ! Clean residual mean=0.000029 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.491027 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 241 components and 0.491027 Jy ![Exited script file: muppet] wmap "J1438-2204_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.478 x 8.648 at -4.472 degrees (North through East) ! Clean map min=-0.0035351 max=0.37516 Jy/beam ! Writing clean map to FITS file: J1438-2204_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.375157 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000670615 device "J1438-2204_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1438-2204_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.536267 0.536267 1.07253 2.14507 4.29014 8.58027 17.1605 34.3211 68.6422 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.375 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.478 x 8.648 at -4.472 degrees (North through East) ! Clean map min=-0.0035351 max=0.37516 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1438-2204_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1438-2204_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1438-2204_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 18:37:03 2007