! Started logfile: J1427-4206_X_1994_08_12_yyk_uvs.log on Mon Jan 8 06:27:01 2007 obs J1427-4206_X_1994_08_12_yyk_uva.fits ! Reading UV FITS file: J1427-4206_X_1994_08_12_yyk_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.552593 visibilities/baseline/integration-bin. ! Found source: J1427-4206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 4e+06 1 4e+06 ! 02 2 8.23236e+09 4e+06 1 4e+06 ! 03 3 8.41236e+09 4e+06 1 4e+06 ! 04 4 8.55236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 783 lines of history. ! ! Reading 2984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1427-4206_X_1994_08_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.77466 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.609 mas, bmaj=1.806 mas, bpa=-6.951 degrees ! Estimated noise=2527.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.22793 Jy ! Component: 100 - total flux cleaned = 1.29976 Jy ! Total flux subtracted in 100 components = 1.29976 Jy ! Clean residual min=-0.205202 max=0.408438 Jy/beam ! Clean residual mean=-0.002484 rms=0.081730 Jy/beam ! Combined flux in latest and established models = 1.29976 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.29976 Jy ! ! Correcting IF 1. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.118549Jy sigma=0.008012 ! Fit after self-cal, rms=1.119117Jy sigma=0.008016 ! Inverting map and beam ! Estimated beam: bmin=0.609 mas, bmaj=1.806 mas, bpa=-6.951 degrees ! Estimated noise=2527.92 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8134 mas, bmaj=2.305 mas, bpa=-11.15 degrees ! Estimated noise=1848.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.149018 Jy ! Component: 100 - total flux cleaned = 0.17964 Jy ! Component: 150 - total flux cleaned = 0.183036 Jy ! Component: 200 - total flux cleaned = 0.184964 Jy ! Total flux subtracted in 200 components = 0.184964 Jy ! Clean residual min=-0.245458 max=0.479751 Jy/beam ! Clean residual mean=-0.005704 rms=0.110775 Jy/beam ! Combined flux in latest and established models = 1.48472 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 1.48472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.118750Jy sigma=0.007926 ! Fit after self-cal, rms=1.118449Jy sigma=0.007925 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8134 x 2.305 at -11.15 degrees (North through East) ! Clean map min=-0.23571 max=1.4589 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.0310817 ! Telescope amplitude corrections in sub-array 1: ! BR 313.42 FD 0.78 HN 1.00* KP 1.00* ! LA 0.78 MK 1.04 NL 1.20 OV 0.85 ! PT 0.76 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.0883138 ! Telescope amplitude corrections in sub-array 1: ! BR 104.84 FD 0.79 HN 1.00* KP 1.00* ! LA 0.78 MK 1.01 NL 1.21 OV 0.88 ! PT 0.77 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.0442923 ! Telescope amplitude corrections in sub-array 1: ! BR 217.27 FD 0.79 HN 1.00* KP 1.00* ! LA 0.76 MK 1.03 NL 1.28 OV 0.85 ! PT 0.78 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.065365 ! Telescope amplitude corrections in sub-array 1: ! BR 144.60 FD 0.80 HN 1.00* KP 1.00* ! LA 0.75 MK 1.01 NL 1.25 OV 0.85 ! PT 0.78 SC 0.94 ! ! ! Fit before self-cal, rms=1.118449Jy sigma=0.007925 ! Fit after self-cal, rms=1.451569Jy sigma=7.212459 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.451569Jy sigma=7.212459 ! Fit after self-cal, rms=1.451545Jy sigma=7.212460 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8817 mas, bmaj=2.458 mas, bpa=-10.25 degrees ! Estimated noise=2.63681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.27422 Jy ! Component: 100 - total flux cleaned = -1.47141 Jy ! Component: 150 - total flux cleaned = -1.47952 Jy ! Component: 200 - total flux cleaned = -1.4798 Jy ! Total flux subtracted in 200 components = -1.4798 Jy ! Clean residual min=-0.012731 max=0.012329 Jy/beam ! Clean residual mean=0.000025 rms=0.003523 Jy/beam ! Combined flux in latest and established models = 0.00492156 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 23 components and 0.00492142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083242Jy sigma=0.133649 ! Fit after self-cal, rms=0.083231Jy sigma=0.133585 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083231Jy sigma=0.133585 ! Fit after self-cal, rms=0.083012Jy sigma=0.133350 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000213092 Jy ! Component: 100 - total flux cleaned = -0.000347862 Jy ! Component: 150 - total flux cleaned = -0.000679531 Jy ! Component: 200 - total flux cleaned = -0.000684265 Jy ! Total flux subtracted in 200 components = -0.000684265 Jy ! Clean residual min=-0.004258 max=0.003579 Jy/beam ! Clean residual mean=0.000022 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.00423716 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.00423716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080009Jy sigma=0.050729 ! Fit after self-cal, rms=0.079341Jy sigma=0.049150 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8817 x 2.458 at -10.25 degrees (North through East) ! Clean map min=-0.011021 max=0.01164 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=10.61 mas, bpa=-2.262 degrees ! Estimated noise=3.3528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00184011 Jy ! Component: 100 - total flux cleaned = -0.00205435 Jy ! Component: 150 - total flux cleaned = -0.00205655 Jy ! Component: 200 - total flux cleaned = -0.00206377 Jy ! Total flux subtracted in 200 components = -0.00206377 Jy ! Clean residual min=-0.000932 max=0.000714 Jy/beam ! Clean residual mean=0.000010 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.00217339 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.00217339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079391Jy sigma=0.050010 ! Fit after self-cal, rms=0.079155Jy sigma=0.049892 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6064 mas, bmaj=1.823 mas, bpa=-8.102 degrees ! Estimated noise=5.30719 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114357 Jy ! Component: 100 - total flux cleaned = 0.000963122 Jy ! Component: 150 - total flux cleaned = 0.000893985 Jy ! Component: 200 - total flux cleaned = 0.000835755 Jy ! Total flux subtracted in 200 components = 0.000835755 Jy ! Clean residual min=-0.000879 max=0.001799 Jy/beam ! Clean residual mean=-0.000011 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.000835755 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.000835755 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8817 mas, bmaj=2.458 mas, bpa=-10.25 degrees ! Estimated noise=2.63681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425181 Jy ! Component: 100 - total flux cleaned = -0.000416932 Jy ! Component: 150 - total flux cleaned = -0.000416314 Jy ! Component: 200 - total flux cleaned = -0.000416124 Jy ! Total flux subtracted in 200 components = -0.000416124 Jy ! Clean residual min=-0.000617 max=0.001416 Jy/beam ! Clean residual mean=-0.000015 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.000419631 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 0.000419631 Jy ! Inverting map ! Added new window around map position (-3.2, -3.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131009 Jy ! Component: 100 - total flux cleaned = 0.00145298 Jy ! Component: 150 - total flux cleaned = 0.00150595 Jy ! Component: 200 - total flux cleaned = 0.00151453 Jy ! Total flux subtracted in 200 components = 0.00151453 Jy ! Clean residual min=-0.000486 max=0.000677 Jy/beam ! Clean residual mean=-0.000003 rms=0.000152 Jy/beam ! Combined flux in latest and established models = 0.00193416 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 42 components and 0.00193416 Jy ! Inverting map ! Added new window around map position (3.8, 16). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494748 Jy ! Component: 100 - total flux cleaned = 0.000507612 Jy ! Component: 150 - total flux cleaned = 0.00053737 Jy ! Component: 200 - total flux cleaned = 0.000545313 Jy ! Total flux subtracted in 200 components = 0.000545313 Jy ! Clean residual min=-0.000256 max=0.000298 Jy/beam ! Clean residual mean=-0.000007 rms=0.000078 Jy/beam ! Combined flux in latest and established models = 0.00247947 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 63 components and 0.00247947 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=10.61 mas, bpa=-2.262 degrees ! Estimated noise=3.3528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.79909e-06 Jy ! Component: 100 - total flux cleaned = -1.21093e-05 Jy ! Component: 150 - total flux cleaned = -1.65547e-05 Jy ! Component: 200 - total flux cleaned = -2.08906e-05 Jy ! Total flux subtracted in 200 components = -2.08906e-05 Jy ! Clean residual min=-0.000228 max=0.000256 Jy/beam ! Clean residual mean=-0.000010 rms=0.000087 Jy/beam ! Combined flux in latest and established models = 0.00245858 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 71 components and 0.00245858 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8817 mas, bmaj=2.458 mas, bpa=-10.25 degrees ! Estimated noise=2.63681 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.00969e-05 Jy ! Component: 100 - total flux cleaned = -2.01826e-05 Jy ! Component: 150 - total flux cleaned = -1.9955e-05 Jy ! Component: 200 - total flux cleaned = -1.4921e-05 Jy ! Total flux subtracted in 200 components = -1.4921e-05 Jy ! Clean residual min=-0.000251 max=0.000241 Jy/beam ! Clean residual mean=-0.000006 rms=0.000072 Jy/beam ! Combined flux in latest and established models = 0.00244366 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 0.00244366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078735Jy sigma=0.008426 ! Fit after self-cal, rms=0.078679Jy sigma=0.008308 wmodel J1427-4206_X_1994_08_12_yyk\_map.mod ! Writing 87 model components to file: J1427-4206_X_1994_08_12_yyk_map.mod wobs J1427-4206_X_1994_08_12_yyk\_uvs.fits ! Writing UV FITS file: J1427-4206_X_1994_08_12_yyk_uvs.fits wwins J1427-4206_X_1994_08_12_yyk\_map.win ! wwins: Wrote 3 windows to J1427-4206_X_1994_08_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.06462e-05 Jy ! Component: 100 - total flux cleaned = -4.05876e-05 Jy ! Component: 150 - total flux cleaned = 3.3716e-06 Jy ! Component: 200 - total flux cleaned = 4.13509e-05 Jy ! Component: 250 - total flux cleaned = 6.51911e-05 Jy ! Component: 300 - total flux cleaned = 9.04843e-05 Jy ! Component: 350 - total flux cleaned = 0.000106576 Jy ! Component: 400 - total flux cleaned = 0.00012448 Jy ! Component: 450 - total flux cleaned = 0.000136698 Jy ! Component: 500 - total flux cleaned = 0.000153208 Jy ! Component: 550 - total flux cleaned = 0.00017381 Jy ! Component: 600 - total flux cleaned = 0.00018936 Jy ! Component: 650 - total flux cleaned = 0.000204491 Jy ! Component: 700 - total flux cleaned = 0.000215028 Jy ! Component: 750 - total flux cleaned = 0.000223302 Jy ! Component: 800 - total flux cleaned = 0.000235479 Jy ! Component: 850 - total flux cleaned = 0.00024345 Jy ! Component: 900 - total flux cleaned = 0.000255243 Jy ! Component: 950 - total flux cleaned = 0.000266911 Jy ! Component: 1000 - total flux cleaned = 0.000278445 Jy ! Component: 1050 - total flux cleaned = 0.000287977 Jy ! Component: 1100 - total flux cleaned = 0.000293615 Jy ! Component: 1150 - total flux cleaned = 0.000301111 Jy ! Component: 1200 - total flux cleaned = 0.000306665 Jy ! Component: 1250 - total flux cleaned = 0.000304808 Jy ! Component: 1300 - total flux cleaned = 0.000301137 Jy ! Component: 1350 - total flux cleaned = 0.000302967 Jy ! Component: 1400 - total flux cleaned = 0.000302978 Jy ! Component: 1450 - total flux cleaned = 0.000301122 Jy ! Component: 1500 - total flux cleaned = 0.000304832 Jy ! Component: 1550 - total flux cleaned = 0.000302975 Jy ! Component: 1600 - total flux cleaned = 0.000302959 Jy ! Component: 1650 - total flux cleaned = 0.000304812 Jy ! Component: 1700 - total flux cleaned = 0.000306676 Jy ! Component: 1750 - total flux cleaned = 0.000306674 Jy ! Component: 1800 - total flux cleaned = 0.000308541 Jy ! Component: 1850 - total flux cleaned = 0.000306634 Jy ! Component: 1900 - total flux cleaned = 0.000310419 Jy ! Component: 1950 - total flux cleaned = 0.000310399 Jy ! Component: 2000 - total flux cleaned = 0.000312324 Jy ! Total flux subtracted in 2048 components = 0.000312312 Jy ! Clean residual min=-0.000109 max=0.000107 Jy/beam ! Clean residual mean=0.000001 rms=0.000032 Jy/beam ! Combined flux in latest and established models = 0.00275597 Jy keep ! Adding 83 model components to the UV plane model. ! The established model now contains 170 components and 0.00275597 Jy ![Exited script file: muppet] wmap "J1427-4206_X_1994_08_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8817 x 2.458 at -10.25 degrees (North through East) ! Clean map min=-0.00032707 max=0.00078207 Jy/beam ! Writing clean map to FITS file: J1427-4206_X_1994_08_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.000782069 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 3.43254e-05 device "J1427-4206_X_1994_08_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J1427-4206_X_1994_08_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -13.1671 13.1671 26.3343 52.6686 print "clev=",int(3*image_rms*10000)/10000 ! clev= 1e-04 print "peak=",int(peak_flux*1000)/1000 ! peak= 0 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8817 x 2.458 at -10.25 degrees (North through East) ! Clean map min=-0.00032707 max=0.00078207 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1427-4206_X_1994_08_12_yyk\_map.gif/gif" ! Attempting to open device: 'J1427-4206_X_1994_08_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1427-4206_X_1994_08_12_yyk_uvs.log closed on Mon Jan 8 06:27:07 2007