! Started logfile: J1409-2315_X_1997_07_02_yyk_uvs.log on Mon Jan 8 06:21:18 2007 obs J1409-2315_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1409-2315_X_1997_07_02_yyk_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.609479 visibilities/baseline/integration-bin. ! Found source: J1409-2315 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 15688 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1409-2315_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.240098 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8299 mas, bmaj=3.301 mas, bpa=-20.51 degrees ! Estimated noise=1691.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.05742 Jy ! Component: 100 - total flux cleaned = 0.0856983 Jy ! Total flux subtracted in 100 components = 0.0856983 Jy ! Clean residual min=-0.012485 max=0.018505 Jy/beam ! Clean residual mean=0.000241 rms=0.004651 Jy/beam ! Combined flux in latest and established models = 0.0856983 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.0856983 Jy ! ! Correcting IF 1. ! A total of 301 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 301 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 301 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 336 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.224521Jy sigma=0.001494 ! Fit after self-cal, rms=0.223053Jy sigma=0.001484 ! Inverting map and beam ! Estimated beam: bmin=0.8299 mas, bmaj=3.301 mas, bpa=-20.51 degrees ! Estimated noise=1691.75 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.095 mas, bmaj=4.025 mas, bpa=-19.02 degrees ! Estimated noise=839.345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.039962 Jy ! Component: 100 - total flux cleaned = 0.0591038 Jy ! Component: 150 - total flux cleaned = 0.0692462 Jy ! Component: 200 - total flux cleaned = 0.0746808 Jy ! Total flux subtracted in 200 components = 0.0746808 Jy ! Clean residual min=-0.013559 max=0.031790 Jy/beam ! Clean residual mean=0.000125 rms=0.006325 Jy/beam ! Combined flux in latest and established models = 0.160379 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 82 components and 0.160379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219347Jy sigma=0.001450 ! Fit after self-cal, rms=0.219286Jy sigma=0.001449 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.095 x 4.025 at -19.02 degrees (North through East) ! Clean map min=-0.013203 max=0.058673 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.219286Jy sigma=0.001449 ! Fit after self-cal, rms=0.219317Jy sigma=0.001449 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219317Jy sigma=0.001449 ! Fit after self-cal, rms=0.219317Jy sigma=0.001449 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.096 mas, bmaj=4.025 mas, bpa=-19.02 degrees ! Estimated noise=840.046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165702 Jy ! Component: 100 - total flux cleaned = 0.00268012 Jy ! Component: 150 - total flux cleaned = 0.00355525 Jy ! Component: 200 - total flux cleaned = 0.00444059 Jy ! Total flux subtracted in 200 components = 0.00444059 Jy ! Clean residual min=-0.013221 max=0.030694 Jy/beam ! Clean residual mean=0.000119 rms=0.006160 Jy/beam ! Combined flux in latest and established models = 0.16482 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 91 components and 0.16482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219213Jy sigma=0.001448 ! Fit after self-cal, rms=0.219199Jy sigma=0.001448 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219199Jy sigma=0.001448 ! Fit after self-cal, rms=0.217182Jy sigma=0.001433 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -9.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0332972 Jy ! Component: 100 - total flux cleaned = 0.0475683 Jy ! Component: 150 - total flux cleaned = 0.055871 Jy ! Component: 200 - total flux cleaned = 0.0615909 Jy ! Total flux subtracted in 200 components = 0.0615909 Jy ! Clean residual min=-0.008121 max=0.020783 Jy/beam ! Clean residual mean=0.000012 rms=0.003631 Jy/beam ! Combined flux in latest and established models = 0.226411 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 63 model components to the UV plane model. ! The established model now contains 154 components and 0.226411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213961Jy sigma=0.001409 ! Fit after self-cal, rms=0.212802Jy sigma=0.001400 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.096 x 4.025 at -19.02 degrees (North through East) ! Clean map min=-0.0075542 max=0.057014 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=5.888 mas, bpa=-0.5168 degrees ! Estimated noise=977.306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159431 Jy ! Component: 100 - total flux cleaned = 0.0210472 Jy ! Component: 150 - total flux cleaned = 0.0225679 Jy ! Component: 200 - total flux cleaned = 0.0233861 Jy ! Total flux subtracted in 200 components = 0.0233861 Jy ! Clean residual min=-0.007095 max=0.014990 Jy/beam ! Clean residual mean=-0.000035 rms=0.002894 Jy/beam ! Combined flux in latest and established models = 0.249797 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 57 model components to the UV plane model. ! The established model now contains 200 components and 0.249797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212284Jy sigma=0.001397 ! Fit after self-cal, rms=0.212064Jy sigma=0.001395 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8299 mas, bmaj=3.301 mas, bpa=-20.51 degrees ! Estimated noise=1732.18 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0650079 Jy ! Component: 100 - total flux cleaned = 0.10368 Jy ! Component: 150 - total flux cleaned = 0.130715 Jy ! Component: 200 - total flux cleaned = 0.151352 Jy ! Total flux subtracted in 200 components = 0.151352 Jy ! Clean residual min=-0.009284 max=0.011763 Jy/beam ! Clean residual mean=0.000195 rms=0.003161 Jy/beam ! Combined flux in latest and established models = 0.151352 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 69 model components to the UV plane model. ! The established model now contains 69 components and 0.151352 Jy ! Inverting map and beam ! Estimated beam: bmin=1.096 mas, bmaj=4.025 mas, bpa=-19.02 degrees ! Estimated noise=840.046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0308658 Jy ! Component: 100 - total flux cleaned = 0.0502879 Jy ! Component: 150 - total flux cleaned = 0.0637604 Jy ! Component: 200 - total flux cleaned = 0.0734147 Jy ! Total flux subtracted in 200 components = 0.0734147 Jy ! Clean residual min=-0.006471 max=0.009798 Jy/beam ! Clean residual mean=0.000022 rms=0.002466 Jy/beam ! Combined flux in latest and established models = 0.224767 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 156 components and 0.224767 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=5.888 mas, bpa=-0.5168 degrees ! Estimated noise=977.306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103534 Jy ! Component: 100 - total flux cleaned = 0.0170069 Jy ! Component: 150 - total flux cleaned = 0.021468 Jy ! Component: 200 - total flux cleaned = 0.0246013 Jy ! Total flux subtracted in 200 components = 0.0246013 Jy ! Clean residual min=-0.006387 max=0.011784 Jy/beam ! Clean residual mean=-0.000033 rms=0.002445 Jy/beam ! Combined flux in latest and established models = 0.249368 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 207 components and 0.249368 Jy ! Inverting map ! Added new window around map position (-1.8, 9.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104554 Jy ! Component: 100 - total flux cleaned = 0.0104922 Jy ! Component: 150 - total flux cleaned = 0.0109284 Jy ! Component: 200 - total flux cleaned = 0.0111672 Jy ! Total flux subtracted in 200 components = 0.0111672 Jy ! Clean residual min=-0.004882 max=0.005637 Jy/beam ! Clean residual mean=-0.000066 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 0.260535 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 259 components and 0.260535 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.096 mas, bmaj=4.025 mas, bpa=-19.02 degrees ! Estimated noise=840.046 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -9.33753e-06 Jy ! Component: 100 - total flux cleaned = -0.000116745 Jy ! Component: 150 - total flux cleaned = -6.65193e-06 Jy ! Component: 200 - total flux cleaned = -0.000103345 Jy ! Total flux subtracted in 200 components = -0.000103345 Jy ! Clean residual min=-0.004671 max=0.004077 Jy/beam ! Clean residual mean=-0.000040 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.260432 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 293 components and 0.260432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211384Jy sigma=0.001391 ! Fit after self-cal, rms=0.211214Jy sigma=0.001390 wmodel J1409-2315_X_1997_07_02_yyk\_map.mod ! Writing 293 model components to file: J1409-2315_X_1997_07_02_yyk_map.mod wobs J1409-2315_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1409-2315_X_1997_07_02_yyk_uvs.fits wwins J1409-2315_X_1997_07_02_yyk\_map.win ! wwins: Wrote 3 windows to J1409-2315_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000429737 Jy ! Component: 100 - total flux cleaned = 0.00014979 Jy ! Component: 150 - total flux cleaned = 2.18142e-05 Jy ! Component: 200 - total flux cleaned = -0.000459568 Jy ! Component: 250 - total flux cleaned = -0.000798948 Jy ! Component: 300 - total flux cleaned = -0.00123347 Jy ! Component: 350 - total flux cleaned = -0.00154691 Jy ! Component: 400 - total flux cleaned = -0.00179959 Jy ! Component: 450 - total flux cleaned = -0.00204585 Jy ! Component: 500 - total flux cleaned = -0.00233087 Jy ! Component: 550 - total flux cleaned = -0.00237757 Jy ! Component: 600 - total flux cleaned = -0.0025117 Jy ! Component: 650 - total flux cleaned = -0.00259845 Jy ! Component: 700 - total flux cleaned = -0.00259877 Jy ! Component: 750 - total flux cleaned = -0.00268276 Jy ! Component: 800 - total flux cleaned = -0.00284591 Jy ! Component: 850 - total flux cleaned = -0.00300533 Jy ! Component: 900 - total flux cleaned = -0.00304416 Jy ! Component: 950 - total flux cleaned = -0.0032749 Jy ! Component: 1000 - total flux cleaned = -0.0033121 Jy ! Component: 1050 - total flux cleaned = -0.00342285 Jy ! Component: 1100 - total flux cleaned = -0.00356754 Jy ! Component: 1150 - total flux cleaned = -0.00381597 Jy ! Component: 1200 - total flux cleaned = -0.0039204 Jy ! Component: 1250 - total flux cleaned = -0.00395474 Jy ! Component: 1300 - total flux cleaned = -0.00402257 Jy ! Component: 1350 - total flux cleaned = -0.00405591 Jy ! Component: 1400 - total flux cleaned = -0.00408898 Jy ! Component: 1450 - total flux cleaned = -0.00418638 Jy ! Component: 1500 - total flux cleaned = -0.00418638 Jy ! Component: 1550 - total flux cleaned = -0.00406009 Jy ! Component: 1600 - total flux cleaned = -0.00409179 Jy ! Component: 1650 - total flux cleaned = -0.00409174 Jy ! Component: 1700 - total flux cleaned = -0.00393959 Jy ! Component: 1750 - total flux cleaned = -0.00393968 Jy ! Component: 1800 - total flux cleaned = -0.00385051 Jy ! Component: 1850 - total flux cleaned = -0.0036455 Jy ! Component: 1900 - total flux cleaned = -0.00367397 Jy ! Component: 1950 - total flux cleaned = -0.00353016 Jy ! Component: 2000 - total flux cleaned = -0.00338809 Jy ! Total flux subtracted in 2048 components = -0.00330416 Jy ! Clean residual min=-0.002151 max=0.001695 Jy/beam ! Clean residual mean=-0.000026 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.257128 Jy keep ! Adding 126 model components to the UV plane model. ! The established model now contains 419 components and 0.257128 Jy ![Exited script file: muppet] wmap "J1409-2315_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.096 x 4.025 at -19.02 degrees (North through East) ! Clean map min=-0.0042235 max=0.062573 Jy/beam ! Writing clean map to FITS file: J1409-2315_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0625735 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000582803 device "J1409-2315_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1409-2315_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.79417 2.79417 5.58834 11.1767 22.3534 44.7068 89.4135 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.096 x 4.025 at -19.02 degrees (North through East) ! Clean map min=-0.0042235 max=0.062573 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1409-2315_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1409-2315_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1409-2315_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 06:21:26 2007