! Started logfile: J1354-0206_X_1997_05_07_yyk_uvs.log on Mon Jan 8 06:15:11 2007 obs J1354-0206_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1354-0206_X_1997_05_07_yyk_uva.fits ! AN table 1: 136 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.672876 visibilities/baseline/integration-bin. ! Found source: J1354-0206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 16472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1354-0206_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.776932 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.031 mas, bmaj=2.191 mas, bpa=6.771 degrees ! Estimated noise=1002.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.624937 Jy ! Component: 100 - total flux cleaned = 0.735762 Jy ! Total flux subtracted in 100 components = 0.735762 Jy ! Clean residual min=-0.016779 max=0.033191 Jy/beam ! Clean residual mean=0.000101 rms=0.005521 Jy/beam ! Combined flux in latest and established models = 0.735762 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.735762 Jy ! ! Correcting IF 1. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.222486Jy sigma=0.001519 ! Fit after self-cal, rms=0.221887Jy sigma=0.001516 ! Inverting map and beam ! Estimated beam: bmin=1.031 mas, bmaj=2.191 mas, bpa=6.771 degrees ! Estimated noise=1003.12 mJy/beam. ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472794 Jy ! Component: 100 - total flux cleaned = 0.0708568 Jy ! Total flux subtracted in 100 components = 0.0708568 Jy ! Clean residual min=-0.012368 max=0.013090 Jy/beam ! Clean residual mean=0.000022 rms=0.003115 Jy/beam ! Combined flux in latest and established models = 0.806619 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 38 components and 0.806619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213127Jy sigma=0.001445 ! Fit after self-cal, rms=0.213072Jy sigma=0.001444 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.27 mas, bmaj=2.563 mas, bpa=5.262 degrees ! Estimated noise=784.785 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.018253 Jy ! Component: 100 - total flux cleaned = 0.0257316 Jy ! Component: 150 - total flux cleaned = 0.0289858 Jy ! Component: 200 - total flux cleaned = 0.0296242 Jy ! Total flux subtracted in 200 components = 0.0296242 Jy ! Clean residual min=-0.011982 max=0.010256 Jy/beam ! Clean residual mean=-0.000031 rms=0.002502 Jy/beam ! Combined flux in latest and established models = 0.836243 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 53 components and 0.836243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212243Jy sigma=0.001437 ! Fit after self-cal, rms=0.212193Jy sigma=0.001437 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.27 x 2.563 at 5.262 degrees (North through East) ! Clean map min=-0.011208 max=0.73435 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00321 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.02 KP 1.00 ! LA 1.00 MK 1.02 NL 1.02 OV 0.99 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00888 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.00 KP 1.01 ! LA 0.99 MK 0.97 NL 1.02 OV 1.03 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.995603 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.00 KP 1.00 ! LA 1.00 MK 1.01 NL 1.01 OV 0.99 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.979475 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.05 KP 1.01 ! LA 1.01 MK 1.00 NL 1.04 OV 1.01 ! PT 0.97 SC 1.06 ! ! ! Fit before self-cal, rms=0.212193Jy sigma=0.001437 ! Fit after self-cal, rms=0.211417Jy sigma=0.001428 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211417Jy sigma=0.001428 ! Fit after self-cal, rms=0.211418Jy sigma=0.001428 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.277 mas, bmaj=2.574 mas, bpa=5.09 degrees ! Estimated noise=780.802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00620688 Jy ! Component: 100 - total flux cleaned = -0.00728918 Jy ! Component: 150 - total flux cleaned = -0.00753373 Jy ! Component: 200 - total flux cleaned = -0.00767292 Jy ! Total flux subtracted in 200 components = -0.00767292 Jy ! Clean residual min=-0.005488 max=0.006253 Jy/beam ! Clean residual mean=-0.000037 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.82857 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.82857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211275Jy sigma=0.001427 ! Fit after self-cal, rms=0.211253Jy sigma=0.001427 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211253Jy sigma=0.001427 ! Fit after self-cal, rms=0.187440Jy sigma=0.001280 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000989216 Jy ! Component: 100 - total flux cleaned = 0.0003656 Jy ! Component: 150 - total flux cleaned = -0.000382079 Jy ! Component: 200 - total flux cleaned = -0.00079485 Jy ! Total flux subtracted in 200 components = -0.00079485 Jy ! Clean residual min=-0.005021 max=0.006009 Jy/beam ! Clean residual mean=-0.000039 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.827776 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.827776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186766Jy sigma=0.001276 ! Fit after self-cal, rms=0.183957Jy sigma=0.001258 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.277 x 2.574 at 5.09 degrees (North through East) ! Clean map min=-0.0050314 max=0.74019 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183957Jy sigma=0.001258 ! Fit after self-cal, rms=0.181741Jy sigma=0.001249 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181741Jy sigma=0.001249 ! Fit after self-cal, rms=0.181289Jy sigma=0.001246 ! Inverting map and beam ! Estimated beam: bmin=1.26 mas, bmaj=2.559 mas, bpa=6.184 degrees ! Estimated noise=776.918 mJy/beam. ! Added new window around map position (-3, 10.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00623204 Jy ! Component: 100 - total flux cleaned = 0.00757573 Jy ! Component: 150 - total flux cleaned = 0.00828537 Jy ! Component: 200 - total flux cleaned = 0.00854704 Jy ! Total flux subtracted in 200 components = 0.00854704 Jy ! Clean residual min=-0.003290 max=0.004002 Jy/beam ! Clean residual mean=-0.000020 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.836323 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 0.836323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181110Jy sigma=0.001244 ! Fit after self-cal, rms=0.180983Jy sigma=0.001244 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180983Jy sigma=0.001244 ! Fit after self-cal, rms=0.180638Jy sigma=0.001242 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180638Jy sigma=0.001242 ! Fit after self-cal, rms=0.180613Jy sigma=0.001241 ! Inverting map and beam ! Estimated beam: bmin=1.26 mas, bmaj=2.559 mas, bpa=6.155 degrees ! Estimated noise=776.58 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120132 Jy ! Component: 100 - total flux cleaned = 0.00128428 Jy ! Component: 150 - total flux cleaned = 0.00128948 Jy ! Component: 200 - total flux cleaned = 0.00129118 Jy ! Total flux subtracted in 200 components = 0.00129118 Jy ! Clean residual min=-0.003066 max=0.003554 Jy/beam ! Clean residual mean=-0.000020 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.837614 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.837614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180561Jy sigma=0.001241 ! Fit after self-cal, rms=0.180552Jy sigma=0.001241 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.471 mas, bmaj=3.971 mas, bpa=9.078 degrees ! Estimated noise=904.797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00094225 Jy ! Component: 100 - total flux cleaned = -0.00121159 Jy ! Component: 150 - total flux cleaned = -0.00121396 Jy ! Component: 200 - total flux cleaned = -0.001177 Jy ! Total flux subtracted in 200 components = -0.001177 Jy ! Clean residual min=-0.003072 max=0.003045 Jy/beam ! Clean residual mean=-0.000033 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.836437 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 108 components and 0.836437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180542Jy sigma=0.001241 ! Fit after self-cal, rms=0.180529Jy sigma=0.001241 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.026 mas, bmaj=2.191 mas, bpa=7.281 degrees ! Estimated noise=997.501 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.631176 Jy ! Component: 100 - total flux cleaned = 0.739666 Jy ! Component: 150 - total flux cleaned = 0.783802 Jy ! Component: 200 - total flux cleaned = 0.804503 Jy ! Total flux subtracted in 200 components = 0.804503 Jy ! Clean residual min=-0.006289 max=0.010078 Jy/beam ! Clean residual mean=0.000016 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 0.804503 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.804503 Jy ! Inverting map and beam ! Estimated beam: bmin=1.26 mas, bmaj=2.559 mas, bpa=6.155 degrees ! Estimated noise=776.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -0.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138825 Jy ! Component: 100 - total flux cleaned = 0.0213159 Jy ! Component: 150 - total flux cleaned = 0.0262467 Jy ! Component: 200 - total flux cleaned = 0.0292691 Jy ! Total flux subtracted in 200 components = 0.0292691 Jy ! Clean residual min=-0.003001 max=0.003278 Jy/beam ! Clean residual mean=-0.000019 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.833772 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 60 components and 0.833772 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.471 mas, bmaj=3.971 mas, bpa=9.078 degrees ! Estimated noise=904.797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014987 Jy ! Component: 100 - total flux cleaned = 0.00205921 Jy ! Component: 150 - total flux cleaned = 0.00226709 Jy ! Component: 200 - total flux cleaned = 0.00233083 Jy ! Total flux subtracted in 200 components = 0.00233083 Jy ! Clean residual min=-0.003297 max=0.002767 Jy/beam ! Clean residual mean=-0.000034 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.836103 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 79 components and 0.836103 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.26 mas, bmaj=2.559 mas, bpa=6.155 degrees ! Estimated noise=776.58 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011741 Jy ! Component: 100 - total flux cleaned = 0.000116936 Jy ! Component: 150 - total flux cleaned = 0.000194303 Jy ! Component: 200 - total flux cleaned = 0.000194117 Jy ! Total flux subtracted in 200 components = 0.000194117 Jy ! Clean residual min=-0.002925 max=0.003219 Jy/beam ! Clean residual mean=-0.000020 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.836297 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 102 components and 0.836297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180520Jy sigma=0.001241 ! Fit after self-cal, rms=0.180514Jy sigma=0.001241 wmodel J1354-0206_X_1997_05_07_yyk\_map.mod ! Writing 102 model components to file: J1354-0206_X_1997_05_07_yyk_map.mod wobs J1354-0206_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1354-0206_X_1997_05_07_yyk_uvs.fits wwins J1354-0206_X_1997_05_07_yyk\_map.win ! wwins: Wrote 3 windows to J1354-0206_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479318 Jy ! Component: 100 - total flux cleaned = 0.00117989 Jy ! Component: 150 - total flux cleaned = 0.00164936 Jy ! Component: 200 - total flux cleaned = 0.00213723 Jy ! Component: 250 - total flux cleaned = 0.00247574 Jy ! Component: 300 - total flux cleaned = 0.00271963 Jy ! Component: 350 - total flux cleaned = 0.0027993 Jy ! Component: 400 - total flux cleaned = 0.00279975 Jy ! Component: 450 - total flux cleaned = 0.00272643 Jy ! Component: 500 - total flux cleaned = 0.00265489 Jy ! Component: 550 - total flux cleaned = 0.00272408 Jy ! Component: 600 - total flux cleaned = 0.00279128 Jy ! Component: 650 - total flux cleaned = 0.00272492 Jy ! Component: 700 - total flux cleaned = 0.00272457 Jy ! Component: 750 - total flux cleaned = 0.00269231 Jy ! Component: 800 - total flux cleaned = 0.00254082 Jy ! Component: 850 - total flux cleaned = 0.00254113 Jy ! Component: 900 - total flux cleaned = 0.00242493 Jy ! Component: 950 - total flux cleaned = 0.00236835 Jy ! Component: 1000 - total flux cleaned = 0.00222844 Jy ! Component: 1050 - total flux cleaned = 0.00209174 Jy ! Component: 1100 - total flux cleaned = 0.00198443 Jy ! Component: 1150 - total flux cleaned = 0.0019578 Jy ! Component: 1200 - total flux cleaned = 0.00193186 Jy ! Component: 1250 - total flux cleaned = 0.00188038 Jy ! Component: 1300 - total flux cleaned = 0.00185455 Jy ! Component: 1350 - total flux cleaned = 0.00173106 Jy ! Component: 1400 - total flux cleaned = 0.00170699 Jy ! Component: 1450 - total flux cleaned = 0.00175522 Jy ! Component: 1500 - total flux cleaned = 0.00168463 Jy ! Component: 1550 - total flux cleaned = 0.00173072 Jy ! Component: 1600 - total flux cleaned = 0.00166161 Jy ! Component: 1650 - total flux cleaned = 0.00166123 Jy ! Component: 1700 - total flux cleaned = 0.00159398 Jy ! Component: 1750 - total flux cleaned = 0.00155015 Jy ! Component: 1800 - total flux cleaned = 0.00148564 Jy ! Component: 1850 - total flux cleaned = 0.00150749 Jy ! Component: 1900 - total flux cleaned = 0.00148682 Jy ! Component: 1950 - total flux cleaned = 0.00142387 Jy ! Component: 2000 - total flux cleaned = 0.00140316 Jy ! Total flux subtracted in 2048 components = 0.00142355 Jy ! Clean residual min=-0.001226 max=0.001184 Jy/beam ! Clean residual mean=-0.000010 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.837721 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 225 components and 0.83772 Jy ![Exited script file: muppet] wmap "J1354-0206_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.26 x 2.559 at 6.155 degrees (North through East) ! Clean map min=-0.0021543 max=0.73949 Jy/beam ! Writing clean map to FITS file: J1354-0206_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.739492 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000403218 device "J1354-0206_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1354-0206_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.163579 0.163579 0.327158 0.654317 1.30863 2.61727 5.23454 10.4691 20.9381 41.8763 83.7526 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.739 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.26 x 2.559 at 6.155 degrees (North through East) ! Clean map min=-0.0021543 max=0.73949 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1354-0206_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1354-0206_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1354-0206_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 06:15:20 2007