! Started logfile: J1354-0206_X_1995_04_19_yyk_uvs.log on Mon Jan 8 06:14:54 2007 obs J1354-0206_X_1995_04_19_yyk_uva.fits ! Reading UV FITS file: J1354-0206_X_1995_04_19_yyk_uva.fits ! AN table 1: 31 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.946237 visibilities/baseline/integration-bin. ! Found source: J1354-0206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 4e+06 1 4e+06 ! 02 2 8.23236e+09 4e+06 1 4e+06 ! 03 3 8.41236e+09 4e+06 1 4e+06 ! 04 4 8.55236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 724 lines of history. ! ! Reading 5280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1354-0206_X_1995_04_19_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.714486 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.83 mas, bmaj=1.834 mas, bpa=-3.818 degrees ! Estimated noise=1337.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.534743 Jy ! Component: 100 - total flux cleaned = 0.665455 Jy ! Total flux subtracted in 100 components = 0.665455 Jy ! Clean residual min=-0.027110 max=0.046574 Jy/beam ! Clean residual mean=-0.000395 rms=0.008850 Jy/beam ! Combined flux in latest and established models = 0.665455 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.665455 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.276290Jy sigma=0.002634 ! Fit after self-cal, rms=0.276022Jy sigma=0.002631 ! Inverting map and beam ! Estimated beam: bmin=0.83 mas, bmaj=1.834 mas, bpa=-3.818 degrees ! Estimated noise=1337.11 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=2.144 mas, bpa=-2.529 degrees ! Estimated noise=974.182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0817997 Jy ! Component: 100 - total flux cleaned = 0.117031 Jy ! Component: 150 - total flux cleaned = 0.133517 Jy ! Component: 200 - total flux cleaned = 0.140123 Jy ! Total flux subtracted in 200 components = 0.140123 Jy ! Clean residual min=-0.024160 max=0.017170 Jy/beam ! Clean residual mean=-0.000077 rms=0.005444 Jy/beam ! Combined flux in latest and established models = 0.805578 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 40 components and 0.805578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260150Jy sigma=0.002461 ! Fit after self-cal, rms=0.260093Jy sigma=0.002461 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.028 x 2.144 at -2.529 degrees (North through East) ! Clean map min=-0.02337 max=0.64772 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.998495 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.90 KP 1.02 ! LA 0.93 MK 1.20 NL 0.99 OV 1.03 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00251 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.90 KP 1.04 ! LA 0.90 MK 1.20 NL 0.98 OV 1.02 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.98072 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.97 KP 1.01 ! LA 0.93 MK 1.21 NL 1.05 OV 1.01 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.972454 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.96 KP 1.05 ! LA 0.94 MK 1.22 NL 1.02 OV 1.00 ! PT 1.00 SC 1.04 ! ! ! Fit before self-cal, rms=0.260093Jy sigma=0.002461 ! Fit after self-cal, rms=0.276372Jy sigma=0.002417 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276372Jy sigma=0.002417 ! Fit after self-cal, rms=0.276371Jy sigma=0.002417 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=2.211 mas, bpa=0.1654 degrees ! Estimated noise=959.359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0207559 Jy ! Component: 100 - total flux cleaned = -0.024407 Jy ! Component: 150 - total flux cleaned = -0.0263772 Jy ! Component: 200 - total flux cleaned = -0.0276871 Jy ! Total flux subtracted in 200 components = -0.0276871 Jy ! Clean residual min=-0.014816 max=0.011169 Jy/beam ! Clean residual mean=0.000005 rms=0.003099 Jy/beam ! Combined flux in latest and established models = 0.777891 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.777891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275284Jy sigma=0.002404 ! Fit after self-cal, rms=0.275266Jy sigma=0.002403 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275266Jy sigma=0.002403 ! Fit after self-cal, rms=0.201154Jy sigma=0.001869 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014117 Jy ! Component: 100 - total flux cleaned = -0.00293947 Jy ! Component: 150 - total flux cleaned = -0.00637815 Jy ! Component: 200 - total flux cleaned = -0.00864455 Jy ! Total flux subtracted in 200 components = -0.00864455 Jy ! Clean residual min=-0.013496 max=0.012596 Jy/beam ! Clean residual mean=-0.000016 rms=0.003078 Jy/beam ! Combined flux in latest and established models = 0.769247 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.769247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193467Jy sigma=0.001820 ! Fit after self-cal, rms=0.185565Jy sigma=0.001766 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.061 x 2.211 at 0.1654 degrees (North through East) ! Clean map min=-0.012883 max=0.66657 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185565Jy sigma=0.001766 ! Fit after self-cal, rms=0.170673Jy sigma=0.001722 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170673Jy sigma=0.001722 ! Fit after self-cal, rms=0.169384Jy sigma=0.001711 ! Inverting map and beam ! Estimated beam: bmin=1.033 mas, bmaj=2.158 mas, bpa=-1.755 degrees ! Estimated noise=943.84 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101108 Jy ! Component: 100 - total flux cleaned = -0.00119675 Jy ! Component: 150 - total flux cleaned = -0.000860539 Jy ! Component: 200 - total flux cleaned = -0.000866001 Jy ! Total flux subtracted in 200 components = -0.000866001 Jy ! Clean residual min=-0.010198 max=0.007782 Jy/beam ! Clean residual mean=-0.000021 rms=0.002085 Jy/beam ! Combined flux in latest and established models = 0.768381 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 58 components and 0.768381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169017Jy sigma=0.001708 ! Fit after self-cal, rms=0.168534Jy sigma=0.001704 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168534Jy sigma=0.001704 ! Fit after self-cal, rms=0.167815Jy sigma=0.001696 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167815Jy sigma=0.001696 ! Fit after self-cal, rms=0.167601Jy sigma=0.001694 ! Inverting map and beam ! Estimated beam: bmin=1.033 mas, bmaj=2.157 mas, bpa=-1.548 degrees ! Estimated noise=942.677 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.001102 Jy ! Component: 100 - total flux cleaned = -0.00125075 Jy ! Component: 150 - total flux cleaned = -0.00138855 Jy ! Component: 200 - total flux cleaned = -0.00139025 Jy ! Total flux subtracted in 200 components = -0.00139025 Jy ! Clean residual min=-0.009173 max=0.007358 Jy/beam ! Clean residual mean=-0.000021 rms=0.001971 Jy/beam ! Combined flux in latest and established models = 0.76699 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.76699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167388Jy sigma=0.001692 ! Fit after self-cal, rms=0.167265Jy sigma=0.001691 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.134 mas, bmaj=3.459 mas, bpa=-14.57 degrees ! Estimated noise=1193.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155651 Jy ! Component: 100 - total flux cleaned = 0.00109319 Jy ! Component: 150 - total flux cleaned = 0.000739894 Jy ! Component: 200 - total flux cleaned = 0.00046859 Jy ! Total flux subtracted in 200 components = 0.00046859 Jy ! Clean residual min=-0.007144 max=0.006916 Jy/beam ! Clean residual mean=-0.000022 rms=0.002200 Jy/beam ! Combined flux in latest and established models = 0.767459 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 62 components and 0.767459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167284Jy sigma=0.001691 ! Fit after self-cal, rms=0.167180Jy sigma=0.001690 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8317 mas, bmaj=1.84 mas, bpa=-3.37 degrees ! Estimated noise=1305.11 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.547849 Jy ! Component: 100 - total flux cleaned = 0.657694 Jy ! Component: 150 - total flux cleaned = 0.710531 Jy ! Component: 200 - total flux cleaned = 0.738816 Jy ! Total flux subtracted in 200 components = 0.738816 Jy ! Clean residual min=-0.010244 max=0.014152 Jy/beam ! Clean residual mean=-0.000098 rms=0.002929 Jy/beam ! Combined flux in latest and established models = 0.738816 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.738816 Jy ! Inverting map and beam ! Estimated beam: bmin=1.033 mas, bmaj=2.157 mas, bpa=-1.548 degrees ! Estimated noise=942.677 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -0.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.020477 Jy ! Component: 100 - total flux cleaned = 0.0293749 Jy ! Component: 150 - total flux cleaned = 0.0300661 Jy ! Component: 200 - total flux cleaned = 0.0302411 Jy ! Total flux subtracted in 200 components = 0.0302411 Jy ! Clean residual min=-0.006798 max=0.005272 Jy/beam ! Clean residual mean=-0.000015 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.769057 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.769057 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.134 mas, bmaj=3.459 mas, bpa=-14.57 degrees ! Estimated noise=1193.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00021794 Jy ! Component: 100 - total flux cleaned = -0.000429553 Jy ! Component: 150 - total flux cleaned = -0.000528113 Jy ! Component: 200 - total flux cleaned = -0.000693335 Jy ! Total flux subtracted in 200 components = -0.000693335 Jy ! Clean residual min=-0.006704 max=0.005349 Jy/beam ! Clean residual mean=-0.000017 rms=0.002078 Jy/beam ! Combined flux in latest and established models = 0.768364 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.768364 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.033 mas, bmaj=2.157 mas, bpa=-1.548 degrees ! Estimated noise=942.677 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251476 Jy ! Component: 100 - total flux cleaned = 0.000506224 Jy ! Component: 150 - total flux cleaned = 0.000503096 Jy ! Component: 200 - total flux cleaned = 0.000602628 Jy ! Total flux subtracted in 200 components = 0.000602628 Jy ! Clean residual min=-0.006022 max=0.005288 Jy/beam ! Clean residual mean=-0.000009 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.768966 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.768966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166495Jy sigma=0.001684 ! Fit after self-cal, rms=0.166417Jy sigma=0.001683 wmodel J1354-0206_X_1995_04_19_yyk\_map.mod ! Writing 73 model components to file: J1354-0206_X_1995_04_19_yyk_map.mod wobs J1354-0206_X_1995_04_19_yyk\_uvs.fits ! Writing UV FITS file: J1354-0206_X_1995_04_19_yyk_uvs.fits wwins J1354-0206_X_1995_04_19_yyk\_map.win ! wwins: Wrote 2 windows to J1354-0206_X_1995_04_19_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00221364 Jy ! Component: 100 - total flux cleaned = -0.00286845 Jy ! Component: 150 - total flux cleaned = -0.00338907 Jy ! Component: 200 - total flux cleaned = -0.0041265 Jy ! Component: 250 - total flux cleaned = -0.0046705 Jy ! Component: 300 - total flux cleaned = -0.0051925 Jy ! Component: 350 - total flux cleaned = -0.00555054 Jy ! Component: 400 - total flux cleaned = -0.00595952 Jy ! Component: 450 - total flux cleaned = -0.00608961 Jy ! Component: 500 - total flux cleaned = -0.00615369 Jy ! Component: 550 - total flux cleaned = -0.00609241 Jy ! Component: 600 - total flux cleaned = -0.00615222 Jy ! Component: 650 - total flux cleaned = -0.00609291 Jy ! Component: 700 - total flux cleaned = -0.00603653 Jy ! Component: 750 - total flux cleaned = -0.00598188 Jy ! Component: 800 - total flux cleaned = -0.00603632 Jy ! Component: 850 - total flux cleaned = -0.0061394 Jy ! Component: 900 - total flux cleaned = -0.00603913 Jy ! Component: 950 - total flux cleaned = -0.00613936 Jy ! Component: 1000 - total flux cleaned = -0.00628392 Jy ! Component: 1050 - total flux cleaned = -0.00628388 Jy ! Component: 1100 - total flux cleaned = -0.00619264 Jy ! Component: 1150 - total flux cleaned = -0.00628403 Jy ! Component: 1200 - total flux cleaned = -0.00615273 Jy ! Component: 1250 - total flux cleaned = -0.00619693 Jy ! Component: 1300 - total flux cleaned = -0.0060292 Jy ! Component: 1350 - total flux cleaned = -0.00603037 Jy ! Component: 1400 - total flux cleaned = -0.00590802 Jy ! Component: 1450 - total flux cleaned = -0.00598785 Jy ! Component: 1500 - total flux cleaned = -0.00598729 Jy ! Component: 1550 - total flux cleaned = -0.00594887 Jy ! Component: 1600 - total flux cleaned = -0.00602466 Jy ! Component: 1650 - total flux cleaned = -0.00606147 Jy ! Component: 1700 - total flux cleaned = -0.00617134 Jy ! Component: 1750 - total flux cleaned = -0.0062073 Jy ! Component: 1800 - total flux cleaned = -0.0061364 Jy ! Component: 1850 - total flux cleaned = -0.00627699 Jy ! Component: 1900 - total flux cleaned = -0.00637989 Jy ! Component: 1950 - total flux cleaned = -0.00648059 Jy ! Component: 2000 - total flux cleaned = -0.00638044 Jy ! Total flux subtracted in 2048 components = -0.00651282 Jy ! Clean residual min=-0.002138 max=0.001992 Jy/beam ! Clean residual mean=-0.000007 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.762454 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 210 components and 0.762453 Jy ![Exited script file: muppet] wmap "J1354-0206_X_1995_04_19_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.033 x 2.157 at -1.548 degrees (North through East) ! Clean map min=-0.0054517 max=0.65536 Jy/beam ! Writing clean map to FITS file: J1354-0206_X_1995_04_19_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.655359 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000619794 device "J1354-0206_X_1995_04_19_yyk\_map.eps/VPS" ! Attempting to open device: 'J1354-0206_X_1995_04_19_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.28372 0.28372 0.567439 1.13488 2.26976 4.53952 9.07903 18.1581 36.3161 72.6323 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.655 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.033 x 2.157 at -1.548 degrees (North through East) ! Clean map min=-0.0054517 max=0.65536 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1354-0206_X_1995_04_19_yyk\_map.gif/gif" ! Attempting to open device: 'J1354-0206_X_1995_04_19_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1354-0206_X_1995_04_19_yyk_uvs.log closed on Mon Jan 8 06:15:00 2007