! Started logfile: J1350-2204_X_1997_08_27_yyk_uvs.log on Mon Jan 8 06:13:38 2007 obs J1350-2204_X_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1350-2204_X_1997_08_27_yyk_uva.fits ! AN table 1: 138 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.916908 visibilities/baseline/integration-bin. ! Found source: J1350-2204 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 701 lines of history. ! ! Reading 22776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1350-2204_X_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.274753 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7102 mas, bmaj=1.715 mas, bpa=-4.406 degrees ! Estimated noise=1181.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0854475 Jy ! Component: 100 - total flux cleaned = 0.119881 Jy ! Total flux subtracted in 100 components = 0.119881 Jy ! Clean residual min=-0.009108 max=0.015392 Jy/beam ! Clean residual mean=0.000072 rms=0.003109 Jy/beam ! Combined flux in latest and established models = 0.119881 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.119881 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.249190Jy sigma=0.001285 ! Fit after self-cal, rms=0.248178Jy sigma=0.001282 ! Inverting map and beam ! Estimated beam: bmin=0.7102 mas, bmaj=1.715 mas, bpa=-4.406 degrees ! Estimated noise=1184.32 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8672 mas, bmaj=2.155 mas, bpa=-5.608 degrees ! Estimated noise=820.774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.033683 Jy ! Component: 100 - total flux cleaned = 0.0470439 Jy ! Component: 150 - total flux cleaned = 0.0528933 Jy ! Component: 200 - total flux cleaned = 0.0556093 Jy ! Total flux subtracted in 200 components = 0.0556093 Jy ! Clean residual min=-0.008496 max=0.015068 Jy/beam ! Clean residual mean=0.000095 rms=0.002939 Jy/beam ! Combined flux in latest and established models = 0.17549 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 60 components and 0.17549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246037Jy sigma=0.001263 ! Fit after self-cal, rms=0.246021Jy sigma=0.001263 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8672 x 2.155 at -5.608 degrees (North through East) ! Clean map min=-0.0080394 max=0.1048 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.246021Jy sigma=0.001263 ! Fit after self-cal, rms=0.246021Jy sigma=0.001263 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246021Jy sigma=0.001263 ! Fit after self-cal, rms=0.246022Jy sigma=0.001263 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8672 mas, bmaj=2.155 mas, bpa=-5.608 degrees ! Estimated noise=820.774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -25.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179489 Jy ! Component: 100 - total flux cleaned = 0.025294 Jy ! Component: 150 - total flux cleaned = 0.0296873 Jy ! Component: 200 - total flux cleaned = 0.0322506 Jy ! Total flux subtracted in 200 components = 0.0322506 Jy ! Clean residual min=-0.006919 max=0.009470 Jy/beam ! Clean residual mean=0.000072 rms=0.002172 Jy/beam ! Combined flux in latest and established models = 0.207741 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 0.207741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245440Jy sigma=0.001258 ! Fit after self-cal, rms=0.245410Jy sigma=0.001258 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245410Jy sigma=0.001258 ! Fit after self-cal, rms=0.242793Jy sigma=0.001245 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052082 Jy ! Component: 100 - total flux cleaned = 0.00673521 Jy ! Component: 150 - total flux cleaned = 0.00790757 Jy ! Component: 200 - total flux cleaned = 0.00881658 Jy ! Total flux subtracted in 200 components = 0.00881658 Jy ! Clean residual min=-0.006586 max=0.008345 Jy/beam ! Clean residual mean=0.000037 rms=0.002048 Jy/beam ! Combined flux in latest and established models = 0.216557 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.216557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242766Jy sigma=0.001244 ! Fit after self-cal, rms=0.242337Jy sigma=0.001242 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8672 x 2.155 at -5.608 degrees (North through East) ! Clean map min=-0.0063965 max=0.10949 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242337Jy sigma=0.001242 ! Fit after self-cal, rms=0.242337Jy sigma=0.001242 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242337Jy sigma=0.001242 ! Fit after self-cal, rms=0.242267Jy sigma=0.001241 ! Inverting map and beam ! Estimated beam: bmin=0.8672 mas, bmaj=2.155 mas, bpa=-5.608 degrees ! Estimated noise=820.774 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230934 Jy ! Component: 100 - total flux cleaned = 0.00261701 Jy ! Component: 150 - total flux cleaned = 0.00281775 Jy ! Component: 200 - total flux cleaned = 0.00300418 Jy ! Total flux subtracted in 200 components = 0.00300418 Jy ! Clean residual min=-0.006476 max=0.008346 Jy/beam ! Clean residual mean=0.000031 rms=0.002009 Jy/beam ! Combined flux in latest and established models = 0.219562 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 97 components and 0.219562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242257Jy sigma=0.001241 ! Fit after self-cal, rms=0.242251Jy sigma=0.001241 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242251Jy sigma=0.001241 ! Fit after self-cal, rms=0.242251Jy sigma=0.001241 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242251Jy sigma=0.001241 ! Fit after self-cal, rms=0.242258Jy sigma=0.001241 ! Inverting map and beam ! Estimated beam: bmin=0.8672 mas, bmaj=2.155 mas, bpa=-5.608 degrees ! Estimated noise=820.774 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513607 Jy ! Component: 100 - total flux cleaned = 0.000693436 Jy ! Component: 150 - total flux cleaned = 0.0008076 Jy ! Component: 200 - total flux cleaned = 0.00096993 Jy ! Total flux subtracted in 200 components = 0.00096993 Jy ! Clean residual min=-0.006423 max=0.008319 Jy/beam ! Clean residual mean=0.000030 rms=0.001990 Jy/beam ! Combined flux in latest and established models = 0.220531 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 100 components and 0.220532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242242Jy sigma=0.001241 ! Fit after self-cal, rms=0.242246Jy sigma=0.001241 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=4.79 mas, bpa=1.326 degrees ! Estimated noise=1076.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665305 Jy ! Component: 100 - total flux cleaned = 0.00922942 Jy ! Component: 150 - total flux cleaned = 0.00947197 Jy ! Component: 200 - total flux cleaned = 0.00971446 Jy ! Total flux subtracted in 200 components = 0.00971446 Jy ! Clean residual min=-0.009413 max=0.011390 Jy/beam ! Clean residual mean=0.000052 rms=0.003004 Jy/beam ! Combined flux in latest and established models = 0.230246 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 104 components and 0.230246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242362Jy sigma=0.001241 ! Fit after self-cal, rms=0.242368Jy sigma=0.001241 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7102 mas, bmaj=1.715 mas, bpa=-4.406 degrees ! Estimated noise=1184.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0923425 Jy ! Component: 100 - total flux cleaned = 0.127062 Jy ! Component: 150 - total flux cleaned = 0.145966 Jy ! Component: 200 - total flux cleaned = 0.158607 Jy ! Total flux subtracted in 200 components = 0.158607 Jy ! Clean residual min=-0.007655 max=0.010308 Jy/beam ! Clean residual mean=0.000044 rms=0.002182 Jy/beam ! Combined flux in latest and established models = 0.158607 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.158607 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8672 mas, bmaj=2.155 mas, bpa=-5.608 degrees ! Estimated noise=820.774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214192 Jy ! Component: 100 - total flux cleaned = 0.0352228 Jy ! Component: 150 - total flux cleaned = 0.0453471 Jy ! Component: 200 - total flux cleaned = 0.0528765 Jy ! Total flux subtracted in 200 components = 0.0528765 Jy ! Clean residual min=-0.006866 max=0.009107 Jy/beam ! Clean residual mean=0.000060 rms=0.002082 Jy/beam ! Combined flux in latest and established models = 0.211484 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 76 components and 0.211484 Jy ! Inverting map ! Added new window around map position (-1.6, -1.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00983513 Jy ! Component: 100 - total flux cleaned = 0.0155482 Jy ! Component: 150 - total flux cleaned = 0.0199072 Jy ! Component: 200 - total flux cleaned = 0.0229735 Jy ! Total flux subtracted in 200 components = 0.0229735 Jy ! Clean residual min=-0.005549 max=0.008863 Jy/beam ! Clean residual mean=0.000028 rms=0.001737 Jy/beam ! Combined flux in latest and established models = 0.234457 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 108 components and 0.234457 Jy ! Inverting map ! Added new window around map position (-15.2, -9.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00978767 Jy ! Component: 100 - total flux cleaned = 0.012043 Jy ! Component: 150 - total flux cleaned = 0.0143626 Jy ! Component: 200 - total flux cleaned = 0.0168376 Jy ! Total flux subtracted in 200 components = 0.0168376 Jy ! Clean residual min=-0.005163 max=0.005196 Jy/beam ! Clean residual mean=0.000020 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.251295 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 138 components and 0.251295 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=4.79 mas, bpa=1.326 degrees ! Estimated noise=1076.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428237 Jy ! Component: 100 - total flux cleaned = 0.00635097 Jy ! Component: 150 - total flux cleaned = 0.00724444 Jy ! Component: 200 - total flux cleaned = 0.00779929 Jy ! Total flux subtracted in 200 components = 0.00779929 Jy ! Clean residual min=-0.005887 max=0.007427 Jy/beam ! Clean residual mean=0.000033 rms=0.002028 Jy/beam ! Combined flux in latest and established models = 0.259094 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 155 components and 0.259094 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8672 mas, bmaj=2.155 mas, bpa=-5.608 degrees ! Estimated noise=820.774 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168755 Jy ! Component: 100 - total flux cleaned = -0.00169237 Jy ! Component: 150 - total flux cleaned = -0.00177826 Jy ! Component: 200 - total flux cleaned = -0.00169505 Jy ! Total flux subtracted in 200 components = -0.00169505 Jy ! Clean residual min=-0.004660 max=0.004639 Jy/beam ! Clean residual mean=0.000015 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.257399 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 180 components and 0.257399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241409Jy sigma=0.001236 ! Fit after self-cal, rms=0.241366Jy sigma=0.001236 wmodel J1350-2204_X_1997_08_27_yyk\_map.mod ! Writing 180 model components to file: J1350-2204_X_1997_08_27_yyk_map.mod wobs J1350-2204_X_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1350-2204_X_1997_08_27_yyk_uvs.fits wwins J1350-2204_X_1997_08_27_yyk\_map.win ! wwins: Wrote 5 windows to J1350-2204_X_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118974 Jy ! Component: 100 - total flux cleaned = 0.00174614 Jy ! Component: 150 - total flux cleaned = 0.00204614 Jy ! Component: 200 - total flux cleaned = 0.00261899 Jy ! Component: 250 - total flux cleaned = 0.00289392 Jy ! Component: 300 - total flux cleaned = 0.00309205 Jy ! Component: 350 - total flux cleaned = 0.00341434 Jy ! Component: 400 - total flux cleaned = 0.00372835 Jy ! Component: 450 - total flux cleaned = 0.00379024 Jy ! Component: 500 - total flux cleaned = 0.00402758 Jy ! Component: 550 - total flux cleaned = 0.00431805 Jy ! Component: 600 - total flux cleaned = 0.00471563 Jy ! Component: 650 - total flux cleaned = 0.00504812 Jy ! Component: 700 - total flux cleaned = 0.00537439 Jy ! Component: 750 - total flux cleaned = 0.0057476 Jy ! Component: 800 - total flux cleaned = 0.00606111 Jy ! Component: 850 - total flux cleaned = 0.00621468 Jy ! Component: 900 - total flux cleaned = 0.00636504 Jy ! Component: 950 - total flux cleaned = 0.00656259 Jy ! Component: 1000 - total flux cleaned = 0.00675769 Jy ! Component: 1050 - total flux cleaned = 0.00704469 Jy ! Component: 1100 - total flux cleaned = 0.00718679 Jy ! Component: 1150 - total flux cleaned = 0.00746488 Jy ! Component: 1200 - total flux cleaned = 0.00769292 Jy ! Component: 1250 - total flux cleaned = 0.00773789 Jy ! Component: 1300 - total flux cleaned = 0.0078264 Jy ! Component: 1350 - total flux cleaned = 0.0079577 Jy ! Component: 1400 - total flux cleaned = 0.00795795 Jy ! Component: 1450 - total flux cleaned = 0.00800118 Jy ! Component: 1500 - total flux cleaned = 0.00825393 Jy ! Component: 1550 - total flux cleaned = 0.00821248 Jy ! Component: 1600 - total flux cleaned = 0.00837684 Jy ! Component: 1650 - total flux cleaned = 0.00841721 Jy ! Component: 1700 - total flux cleaned = 0.00853834 Jy ! Component: 1750 - total flux cleaned = 0.0087364 Jy ! Component: 1800 - total flux cleaned = 0.00869684 Jy ! Component: 1850 - total flux cleaned = 0.00869699 Jy ! Component: 1900 - total flux cleaned = 0.00881265 Jy ! Component: 1950 - total flux cleaned = 0.00877423 Jy ! Component: 2000 - total flux cleaned = 0.00873622 Jy ! Total flux subtracted in 2048 components = 0.00866172 Jy ! Clean residual min=-0.002548 max=0.002448 Jy/beam ! Clean residual mean=0.000011 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.266061 Jy keep ! Adding 143 model components to the UV plane model. ! The established model now contains 323 components and 0.266061 Jy ![Exited script file: muppet] wmap "J1350-2204_X_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8672 x 2.155 at -5.608 degrees (North through East) ! Clean map min=-0.0041026 max=0.1079 Jy/beam ! Writing clean map to FITS file: J1350-2204_X_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107897 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000727265 device "J1350-2204_X_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1350-2204_X_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.0221 2.0221 4.04421 8.08841 16.1768 32.3537 64.7073 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8672 x 2.155 at -5.608 degrees (North through East) ! Clean map min=-0.0041026 max=0.1079 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1350-2204_X_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1350-2204_X_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1350-2204_X_1997_08_27_yyk_uvs.log closed on Mon Jan 8 06:13:48 2007