! Started logfile: J1342-2051_S_1997_08_27_yyk_uvs.log on Sun Jan 7 18:24:07 2007 obs J1342-2051_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1342-2051_S_1997_08_27_yyk_uva.fits ! AN table 1: 134 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.946269 visibilities/baseline/integration-bin. ! Found source: J1342-2051 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 22824 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1342-2051_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.463243 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=6.713 mas, bpa=-4.977 degrees ! Estimated noise=2219.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.204102 Jy ! Component: 100 - total flux cleaned = 0.26052 Jy ! Total flux subtracted in 100 components = 0.26052 Jy ! Clean residual min=-0.019712 max=0.029443 Jy/beam ! Clean residual mean=0.000117 rms=0.005511 Jy/beam ! Combined flux in latest and established models = 0.26052 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.26052 Jy ! ! Correcting IF 1. ! A total of 217 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.386368Jy sigma=0.001228 ! Fit after self-cal, rms=0.385988Jy sigma=0.001226 ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=6.713 mas, bpa=-4.977 degrees ! Estimated noise=2219.91 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=8.675 mas, bpa=-6.065 degrees ! Estimated noise=1333.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490775 Jy ! Component: 100 - total flux cleaned = 0.0727383 Jy ! Component: 150 - total flux cleaned = 0.0860125 Jy ! Component: 200 - total flux cleaned = 0.0920856 Jy ! Total flux subtracted in 200 components = 0.0920856 Jy ! Clean residual min=-0.009591 max=0.013283 Jy/beam ! Clean residual mean=0.000102 rms=0.003224 Jy/beam ! Combined flux in latest and established models = 0.352605 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 64 model components to the UV plane model. ! The established model now contains 76 components and 0.352605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.381486Jy sigma=0.001208 ! Fit after self-cal, rms=0.381263Jy sigma=0.001207 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 8.675 at -6.065 degrees (North through East) ! Clean map min=-0.0082897 max=0.242 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03351 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.14 HN 0.92 KP 0.92 ! LA 0.97 MK 0.94 NL 1.00* OV 1.10 ! PT 0.94 SC 0.85 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.980808 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.17 HN 1.11 KP 0.96 ! LA 1.07 MK 1.07 NL 0.96 OV 1.05 ! PT 0.95 SC 0.87 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.04216 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.07 HN 0.98 KP 0.90 ! LA 0.80 MK 0.93 NL 0.94 OV 0.91 ! PT 1.06 SC 1.09 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00493 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.10 HN 1.18 KP 0.95 ! LA 0.88 MK 1.10 NL 1.04 OV 0.91 ! PT 0.92 SC 0.91 ! ! ! Fit before self-cal, rms=0.381263Jy sigma=0.001207 ! Fit after self-cal, rms=0.375182Jy sigma=0.001202 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.375182Jy sigma=0.001202 ! Fit after self-cal, rms=0.375193Jy sigma=0.001202 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=8.436 mas, bpa=-4.069 degrees ! Estimated noise=1336.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104641 Jy ! Component: 100 - total flux cleaned = 0.0126544 Jy ! Component: 150 - total flux cleaned = 0.0133072 Jy ! Component: 200 - total flux cleaned = 0.0134515 Jy ! Total flux subtracted in 200 components = 0.0134515 Jy ! Clean residual min=-0.006892 max=0.008791 Jy/beam ! Clean residual mean=-0.000065 rms=0.002031 Jy/beam ! Combined flux in latest and established models = 0.366057 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 105 components and 0.366057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374855Jy sigma=0.001201 ! Fit after self-cal, rms=0.374821Jy sigma=0.001201 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374821Jy sigma=0.001201 ! Fit after self-cal, rms=0.370984Jy sigma=0.001189 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427411 Jy ! Component: 100 - total flux cleaned = 0.00397089 Jy ! Component: 150 - total flux cleaned = 0.00371144 Jy ! Component: 200 - total flux cleaned = 0.00347859 Jy ! Total flux subtracted in 200 components = 0.00347859 Jy ! Clean residual min=-0.006233 max=0.008695 Jy/beam ! Clean residual mean=-0.000056 rms=0.001955 Jy/beam ! Combined flux in latest and established models = 0.369535 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 126 components and 0.369535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370844Jy sigma=0.001189 ! Fit after self-cal, rms=0.370534Jy sigma=0.001188 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.449 x 8.436 at -4.069 degrees (North through East) ! Clean map min=-0.005888 max=0.24712 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370534Jy sigma=0.001188 ! Fit after self-cal, rms=0.399222Jy sigma=0.001186 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399222Jy sigma=0.001186 ! Fit after self-cal, rms=0.399190Jy sigma=0.001186 ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=8.281 mas, bpa=-3.868 degrees ! Estimated noise=1320.23 mJy/beam. ! Added new window around map position (18, -18.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0090938 Jy ! Component: 100 - total flux cleaned = 0.0117127 Jy ! Component: 150 - total flux cleaned = 0.0135215 Jy ! Component: 200 - total flux cleaned = 0.014498 Jy ! Total flux subtracted in 200 components = 0.014498 Jy ! Clean residual min=-0.004968 max=0.005138 Jy/beam ! Clean residual mean=-0.000044 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 0.384033 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 154 components and 0.384033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399005Jy sigma=0.001185 ! Fit after self-cal, rms=0.398986Jy sigma=0.001185 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.398986Jy sigma=0.001185 ! Fit after self-cal, rms=0.400355Jy sigma=0.001183 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.400355Jy sigma=0.001183 ! Fit after self-cal, rms=0.400357Jy sigma=0.001183 ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=8.249 mas, bpa=-3.802 degrees ! Estimated noise=1314.94 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288097 Jy ! Component: 100 - total flux cleaned = 0.00348685 Jy ! Component: 150 - total flux cleaned = 0.00367027 Jy ! Component: 200 - total flux cleaned = 0.003831 Jy ! Total flux subtracted in 200 components = 0.003831 Jy ! Clean residual min=-0.004900 max=0.004774 Jy/beam ! Clean residual mean=-0.000027 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.387864 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 171 components and 0.387864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.400321Jy sigma=0.001183 ! Fit after self-cal, rms=0.400319Jy sigma=0.001183 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.096 mas, bmaj=16.54 mas, bpa=2.571 degrees ! Estimated noise=1662.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140063 Jy ! Component: 100 - total flux cleaned = 0.00185354 Jy ! Component: 150 - total flux cleaned = 0.00202931 Jy ! Component: 200 - total flux cleaned = 0.00218277 Jy ! Total flux subtracted in 200 components = 0.00218277 Jy ! Clean residual min=-0.004121 max=0.003666 Jy/beam ! Clean residual mean=-0.000084 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.390047 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 184 components and 0.390047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.400320Jy sigma=0.001183 ! Fit after self-cal, rms=0.400313Jy sigma=0.001183 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=6.54 mas, bpa=-3.526 degrees ! Estimated noise=2189.09 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.206744 Jy ! Component: 100 - total flux cleaned = 0.266169 Jy ! Component: 150 - total flux cleaned = 0.301977 Jy ! Component: 200 - total flux cleaned = 0.325684 Jy ! Total flux subtracted in 200 components = 0.325684 Jy ! Clean residual min=-0.012433 max=0.010262 Jy/beam ! Clean residual mean=0.000023 rms=0.003095 Jy/beam ! Combined flux in latest and established models = 0.325684 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.325684 Jy ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=8.249 mas, bpa=-3.802 degrees ! Estimated noise=1314.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239502 Jy ! Component: 100 - total flux cleaned = 0.037091 Jy ! Component: 150 - total flux cleaned = 0.0463448 Jy ! Component: 200 - total flux cleaned = 0.0515804 Jy ! Total flux subtracted in 200 components = 0.0515804 Jy ! Clean residual min=-0.005551 max=0.005017 Jy/beam ! Clean residual mean=-0.000023 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.377265 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 71 components and 0.377265 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.096 mas, bmaj=16.54 mas, bpa=2.571 degrees ! Estimated noise=1662.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00677798 Jy ! Component: 100 - total flux cleaned = 0.0103339 Jy ! Component: 150 - total flux cleaned = 0.0113296 Jy ! Component: 200 - total flux cleaned = 0.0120359 Jy ! Total flux subtracted in 200 components = 0.0120359 Jy ! Clean residual min=-0.004331 max=0.004282 Jy/beam ! Clean residual mean=-0.000094 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.389301 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 114 components and 0.389301 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=8.249 mas, bpa=-3.802 degrees ! Estimated noise=1314.94 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000995658 Jy ! Component: 100 - total flux cleaned = -0.000609006 Jy ! Component: 150 - total flux cleaned = -0.00026024 Jy ! Component: 200 - total flux cleaned = -4.47755e-05 Jy ! Total flux subtracted in 200 components = -4.47755e-05 Jy ! Clean residual min=-0.005028 max=0.004182 Jy/beam ! Clean residual mean=-0.000045 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.389256 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 135 components and 0.389256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.400309Jy sigma=0.001183 ! Fit after self-cal, rms=0.400296Jy sigma=0.001183 wmodel J1342-2051_S_1997_08_27_yyk\_map.mod ! Writing 135 model components to file: J1342-2051_S_1997_08_27_yyk_map.mod wobs J1342-2051_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1342-2051_S_1997_08_27_yyk_uvs.fits wwins J1342-2051_S_1997_08_27_yyk\_map.win ! wwins: Wrote 3 windows to J1342-2051_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018982 Jy ! Component: 100 - total flux cleaned = -0.00297783 Jy ! Component: 150 - total flux cleaned = -0.00362925 Jy ! Component: 200 - total flux cleaned = -0.00439087 Jy ! Component: 250 - total flux cleaned = -0.00485871 Jy ! Component: 300 - total flux cleaned = -0.00531347 Jy ! Component: 350 - total flux cleaned = -0.00556668 Jy ! Component: 400 - total flux cleaned = -0.00575205 Jy ! Component: 450 - total flux cleaned = -0.00581174 Jy ! Component: 500 - total flux cleaned = -0.0062812 Jy ! Component: 550 - total flux cleaned = -0.00645306 Jy ! Component: 600 - total flux cleaned = -0.00656716 Jy ! Component: 650 - total flux cleaned = -0.0068448 Jy ! Component: 700 - total flux cleaned = -0.00695454 Jy ! Component: 750 - total flux cleaned = -0.00711533 Jy ! Component: 800 - total flux cleaned = -0.00722116 Jy ! Component: 850 - total flux cleaned = -0.00732478 Jy ! Component: 900 - total flux cleaned = -0.00757957 Jy ! Component: 950 - total flux cleaned = -0.00757899 Jy ! Component: 1000 - total flux cleaned = -0.0076285 Jy ! Component: 1050 - total flux cleaned = -0.00767766 Jy ! Component: 1100 - total flux cleaned = -0.00782182 Jy ! Component: 1150 - total flux cleaned = -0.00786897 Jy ! Component: 1200 - total flux cleaned = -0.00791594 Jy ! Component: 1250 - total flux cleaned = -0.007962 Jy ! Component: 1300 - total flux cleaned = -0.00800747 Jy ! Component: 1350 - total flux cleaned = -0.00823079 Jy ! Component: 1400 - total flux cleaned = -0.00814278 Jy ! Component: 1450 - total flux cleaned = -0.00836116 Jy ! Component: 1500 - total flux cleaned = -0.00844738 Jy ! Component: 1550 - total flux cleaned = -0.00853216 Jy ! Component: 1600 - total flux cleaned = -0.00865732 Jy ! Component: 1650 - total flux cleaned = -0.00873943 Jy ! Component: 1700 - total flux cleaned = -0.00873987 Jy ! Component: 1750 - total flux cleaned = -0.00890245 Jy ! Component: 1800 - total flux cleaned = -0.00910128 Jy ! Component: 1850 - total flux cleaned = -0.00921931 Jy ! Component: 1900 - total flux cleaned = -0.00925792 Jy ! Component: 1950 - total flux cleaned = -0.00948889 Jy ! Component: 2000 - total flux cleaned = -0.0095649 Jy ! Total flux subtracted in 2048 components = -0.00971556 Jy ! Clean residual min=-0.002501 max=0.002263 Jy/beam ! Clean residual mean=-0.000041 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.37954 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 258 components and 0.37954 Jy ![Exited script file: muppet] wmap "J1342-2051_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.375 x 8.249 at -3.802 degrees (North through East) ! Clean map min=-0.0044668 max=0.24573 Jy/beam ! Writing clean map to FITS file: J1342-2051_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.245725 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000737375 device "J1342-2051_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1342-2051_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.900243 0.900243 1.80049 3.60097 7.20195 14.4039 28.8078 57.6156 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.245 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.375 x 8.249 at -3.802 degrees (North through East) ! Clean map min=-0.0044668 max=0.24573 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1342-2051_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1342-2051_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1342-2051_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 18:24:14 2007