! Started logfile: J1339-2620_S_1997_08_27_yyk_uvs.log on Sun Jan 7 18:23:25 2007 obs J1339-2620_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1339-2620_S_1997_08_27_yyk_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.90023 visibilities/baseline/integration-bin. ! Found source: J1339-2620 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 23496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1339-2620_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.989934 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=6.346 mas, bpa=-4.223 degrees ! Estimated noise=2985.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.647125 Jy ! Component: 100 - total flux cleaned = 0.788627 Jy ! Total flux subtracted in 100 components = 0.788627 Jy ! Clean residual min=-0.062562 max=0.086381 Jy/beam ! Clean residual mean=0.000071 rms=0.017662 Jy/beam ! Combined flux in latest and established models = 0.788627 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.788627 Jy ! ! Correcting IF 1. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 369 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.556557Jy sigma=0.001715 ! Fit after self-cal, rms=0.479607Jy sigma=0.001440 ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=6.346 mas, bpa=-4.223 degrees ! Estimated noise=2986.01 mJy/beam. ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.103914 Jy ! Component: 100 - total flux cleaned = 0.132819 Jy ! Total flux subtracted in 100 components = 0.132819 Jy ! Clean residual min=-0.036183 max=0.057355 Jy/beam ! Clean residual mean=0.000174 rms=0.012328 Jy/beam ! Combined flux in latest and established models = 0.921446 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.921446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.454881Jy sigma=0.001338 ! Fit after self-cal, rms=0.454806Jy sigma=0.001338 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=8.455 mas, bpa=-5.273 degrees ! Estimated noise=1406.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0478826 Jy ! Component: 100 - total flux cleaned = 0.0546064 Jy ! Component: 150 - total flux cleaned = 0.0546529 Jy ! Component: 200 - total flux cleaned = 0.0546657 Jy ! Total flux subtracted in 200 components = 0.0546657 Jy ! Clean residual min=-0.020379 max=0.028187 Jy/beam ! Clean residual mean=0.000542 rms=0.006430 Jy/beam ! Combined flux in latest and established models = 0.976112 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.976112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.451490Jy sigma=0.001324 ! Fit after self-cal, rms=0.451424Jy sigma=0.001324 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.509 x 8.455 at -5.273 degrees (North through East) ! Clean map min=-0.020018 max=0.8622 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0229 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.09 HN 0.99 KP 0.93 ! LA 0.99 MK 0.98 NL 1.00* OV 1.07 ! PT 0.98 SC 0.82 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.987914 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.14 HN 1.10 KP 0.95 ! LA 1.09 MK 1.04 NL 0.96 OV 1.02 ! PT 0.97 SC 0.87 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03473 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.08 HN 1.03 KP 0.90 ! LA 0.80 MK 0.92 NL 0.94 OV 0.94 ! PT 1.10 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.984832 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.11 HN 1.27 KP 0.95 ! LA 0.89 MK 1.05 NL 1.04 OV 0.94 ! PT 0.94 SC 1.01 ! ! ! Fit before self-cal, rms=0.451424Jy sigma=0.001324 ! Fit after self-cal, rms=0.434214Jy sigma=0.001283 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.434214Jy sigma=0.001283 ! Fit after self-cal, rms=0.434219Jy sigma=0.001283 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=8.185 mas, bpa=-3.198 degrees ! Estimated noise=1400.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155698 Jy ! Component: 100 - total flux cleaned = 0.0169181 Jy ! Component: 150 - total flux cleaned = 0.0168973 Jy ! Component: 200 - total flux cleaned = 0.0169213 Jy ! Total flux subtracted in 200 components = 0.0169213 Jy ! Clean residual min=-0.015223 max=0.015032 Jy/beam ! Clean residual mean=0.000239 rms=0.003238 Jy/beam ! Combined flux in latest and established models = 0.993033 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 54 components and 0.993033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431131Jy sigma=0.001277 ! Fit after self-cal, rms=0.430851Jy sigma=0.001276 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.430851Jy sigma=0.001276 ! Fit after self-cal, rms=0.419818Jy sigma=0.001240 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00501089 Jy ! Component: 100 - total flux cleaned = 0.00541911 Jy ! Component: 150 - total flux cleaned = 0.00542523 Jy ! Component: 200 - total flux cleaned = 0.00483487 Jy ! Total flux subtracted in 200 components = 0.00483487 Jy ! Clean residual min=-0.011873 max=0.012823 Jy/beam ! Clean residual mean=0.000229 rms=0.002949 Jy/beam ! Combined flux in latest and established models = 0.997868 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 73 components and 0.997868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.418669Jy sigma=0.001238 ! Fit after self-cal, rms=0.417054Jy sigma=0.001234 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.484 x 8.185 at -3.198 degrees (North through East) ! Clean map min=-0.024799 max=0.86856 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417054Jy sigma=0.001234 ! Fit after self-cal, rms=2.235678Jy sigma=0.001199 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.235678Jy sigma=0.001199 ! Fit after self-cal, rms=2.235061Jy sigma=0.001198 ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=8.182 mas, bpa=-3.344 degrees ! Estimated noise=1385.73 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00565108 Jy ! Component: 100 - total flux cleaned = 0.00594196 Jy ! Component: 150 - total flux cleaned = 0.00571823 Jy ! Component: 200 - total flux cleaned = 0.00552725 Jy ! Total flux subtracted in 200 components = 0.00552725 Jy ! Clean residual min=-0.006142 max=0.007551 Jy/beam ! Clean residual mean=0.000184 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 1.0034 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 95 components and 1.0034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.234999Jy sigma=0.001197 ! Fit after self-cal, rms=2.234054Jy sigma=0.001197 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.234054Jy sigma=0.001197 ! Fit after self-cal, rms=2.082446Jy sigma=0.001194 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.082446Jy sigma=0.001194 ! Fit after self-cal, rms=2.082357Jy sigma=0.001194 ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=8.166 mas, bpa=-3.278 degrees ! Estimated noise=1383.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269212 Jy ! Component: 100 - total flux cleaned = 0.00286395 Jy ! Component: 150 - total flux cleaned = 0.00268486 Jy ! Component: 200 - total flux cleaned = 0.00268005 Jy ! Total flux subtracted in 200 components = 0.00268005 Jy ! Clean residual min=-0.005586 max=0.006435 Jy/beam ! Clean residual mean=0.000199 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 1.00608 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 1.00608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.082329Jy sigma=0.001194 ! Fit after self-cal, rms=2.081901Jy sigma=0.001194 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.42 mas, bmaj=18.59 mas, bpa=3.075 degrees ! Estimated noise=1736.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133864 Jy ! Component: 100 - total flux cleaned = 0.00144042 Jy ! Component: 150 - total flux cleaned = 0.00162053 Jy ! Component: 200 - total flux cleaned = 0.00177606 Jy ! Total flux subtracted in 200 components = 0.00177606 Jy ! Clean residual min=-0.005059 max=0.007657 Jy/beam ! Clean residual mean=0.000384 rms=0.001862 Jy/beam ! Combined flux in latest and established models = 1.00785 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 117 components and 1.00785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.081913Jy sigma=0.001193 ! Fit after self-cal, rms=2.081578Jy sigma=0.001193 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.548 mas, bmaj=6.196 mas, bpa=-3.617 degrees ! Estimated noise=3033.21 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.723035 Jy ! Component: 100 - total flux cleaned = 0.86695 Jy ! Component: 150 - total flux cleaned = 0.933823 Jy ! Component: 200 - total flux cleaned = 0.970882 Jy ! Total flux subtracted in 200 components = 0.970882 Jy ! Clean residual min=-0.015953 max=0.016208 Jy/beam ! Clean residual mean=0.000019 rms=0.004196 Jy/beam ! Combined flux in latest and established models = 0.970883 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.970883 Jy ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=8.166 mas, bpa=-3.278 degrees ! Estimated noise=1383.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248539 Jy ! Component: 100 - total flux cleaned = 0.0308864 Jy ! Component: 150 - total flux cleaned = 0.03197 Jy ! Component: 200 - total flux cleaned = 0.0325554 Jy ! Total flux subtracted in 200 components = 0.0325554 Jy ! Clean residual min=-0.005948 max=0.006457 Jy/beam ! Clean residual mean=0.000197 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 1.00344 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 60 components and 1.00344 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.42 mas, bmaj=18.59 mas, bpa=3.075 degrees ! Estimated noise=1736.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199224 Jy ! Component: 100 - total flux cleaned = 0.00234446 Jy ! Component: 150 - total flux cleaned = 0.00262291 Jy ! Component: 200 - total flux cleaned = 0.00273949 Jy ! Total flux subtracted in 200 components = 0.00273949 Jy ! Clean residual min=-0.005696 max=0.007736 Jy/beam ! Clean residual mean=0.000389 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 1.00618 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 95 components and 1.00618 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=8.166 mas, bpa=-3.278 degrees ! Estimated noise=1383.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307692 Jy ! Component: 100 - total flux cleaned = -0.000766597 Jy ! Component: 150 - total flux cleaned = -0.000908018 Jy ! Component: 200 - total flux cleaned = -0.00116202 Jy ! Total flux subtracted in 200 components = -0.00116202 Jy ! Clean residual min=-0.005374 max=0.005799 Jy/beam ! Clean residual mean=0.000203 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 1.00502 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 121 components and 1.00502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.081299Jy sigma=0.001193 ! Fit after self-cal, rms=2.081014Jy sigma=0.001193 wmodel J1339-2620_S_1997_08_27_yyk\_map.mod ! Writing 121 model components to file: J1339-2620_S_1997_08_27_yyk_map.mod wobs J1339-2620_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1339-2620_S_1997_08_27_yyk_uvs.fits wwins J1339-2620_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J1339-2620_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117024 Jy ! Component: 100 - total flux cleaned = 0.00223178 Jy ! Component: 150 - total flux cleaned = 0.00295857 Jy ! Component: 200 - total flux cleaned = 0.00355893 Jy ! Component: 250 - total flux cleaned = 0.00405108 Jy ! Component: 300 - total flux cleaned = 0.00468118 Jy ! Component: 350 - total flux cleaned = 0.00506189 Jy ! Component: 400 - total flux cleaned = 0.00557356 Jy ! Component: 450 - total flux cleaned = 0.00613601 Jy ! Component: 500 - total flux cleaned = 0.00654484 Jy ! Component: 550 - total flux cleaned = 0.00700815 Jy ! Component: 600 - total flux cleaned = 0.00745813 Jy ! Component: 650 - total flux cleaned = 0.00814937 Jy ! Component: 700 - total flux cleaned = 0.00864059 Jy ! Component: 750 - total flux cleaned = 0.00930263 Jy ! Component: 800 - total flux cleaned = 0.00989278 Jy ! Component: 850 - total flux cleaned = 0.0105881 Jy ! Component: 900 - total flux cleaned = 0.0111001 Jy ! Component: 950 - total flux cleaned = 0.0115493 Jy ! Component: 1000 - total flux cleaned = 0.0121008 Jy ! Component: 1050 - total flux cleaned = 0.012697 Jy ! Component: 1100 - total flux cleaned = 0.01323 Jy ! Component: 1150 - total flux cleaned = 0.0136503 Jy ! Component: 1200 - total flux cleaned = 0.0142196 Jy ! Component: 1250 - total flux cleaned = 0.0145256 Jy ! Component: 1300 - total flux cleaned = 0.0151292 Jy ! Component: 1350 - total flux cleaned = 0.0155252 Jy ! Component: 1400 - total flux cleaned = 0.0159165 Jy ! Component: 1450 - total flux cleaned = 0.0164464 Jy ! Component: 1500 - total flux cleaned = 0.016827 Jy ! Component: 1550 - total flux cleaned = 0.0173435 Jy ! Component: 1600 - total flux cleaned = 0.017806 Jy ! Component: 1650 - total flux cleaned = 0.0183087 Jy ! Component: 1700 - total flux cleaned = 0.0188495 Jy ! Component: 1750 - total flux cleaned = 0.01934 Jy ! Component: 1800 - total flux cleaned = 0.0199555 Jy ! Component: 1850 - total flux cleaned = 0.0204331 Jy ! Component: 1900 - total flux cleaned = 0.0209481 Jy ! Component: 1950 - total flux cleaned = 0.0214572 Jy ! Component: 2000 - total flux cleaned = 0.0217923 Jy ! Total flux subtracted in 2048 components = 0.0222079 Jy ! Clean residual min=-0.002712 max=0.003041 Jy/beam ! Clean residual mean=0.000148 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 1.02722 Jy keep ! Adding 126 model components to the UV plane model. ! The established model now contains 247 components and 1.02722 Jy ![Exited script file: muppet] wmap "J1339-2620_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.426 x 8.166 at -3.278 degrees (North through East) ! Clean map min=-0.007436 max=0.86823 Jy/beam ! Writing clean map to FITS file: J1339-2620_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.868227 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000835012 device "J1339-2620_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1339-2620_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.288523 0.288523 0.577046 1.15409 2.30819 4.61637 9.23274 18.4655 36.931 73.8619 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.868 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.426 x 8.166 at -3.278 degrees (North through East) ! Clean map min=-0.007436 max=0.86823 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1339-2620_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1339-2620_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1339-2620_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 18:23:32 2007