! Started logfile: J1337-1257_X_1997_05_07_yyk_uvs.log on Mon Jan 8 06:09:41 2007 obs J1337-1257_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1337-1257_X_1997_05_07_yyk_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.696296 visibilities/baseline/integration-bin. ! Found source: J1337-1257 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 18048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1337-1257_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 4.29384 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9681 mas, bmaj=2.782 mas, bpa=17.69 degrees ! Estimated noise=1092.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.50728 Jy ! Component: 100 - total flux cleaned = 4.08682 Jy ! Total flux subtracted in 100 components = 4.08682 Jy ! Clean residual min=-0.194959 max=0.261861 Jy/beam ! Clean residual mean=0.002536 rms=0.052747 Jy/beam ! Combined flux in latest and established models = 4.08682 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 4.08682 Jy ! ! Correcting IF 1. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.289393Jy sigma=0.007283 ! Fit after self-cal, rms=1.285307Jy sigma=0.007261 ! Inverting map and beam ! Estimated beam: bmin=0.9681 mas, bmaj=2.782 mas, bpa=17.69 degrees ! Estimated noise=1092.33 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.259 mas, bmaj=3.132 mas, bpa=13.27 degrees ! Estimated noise=810.598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.38912 Jy ! Component: 100 - total flux cleaned = 0.532904 Jy ! Component: 150 - total flux cleaned = 0.594629 Jy ! Component: 200 - total flux cleaned = 0.608261 Jy ! Total flux subtracted in 200 components = 0.608261 Jy ! Clean residual min=-0.114523 max=0.175154 Jy/beam ! Clean residual mean=0.004752 rms=0.044201 Jy/beam ! Combined flux in latest and established models = 4.69508 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 4.69508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.271644Jy sigma=0.006687 ! Fit after self-cal, rms=1.269411Jy sigma=0.006674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.259 x 3.132 at 13.27 degrees (North through East) ! Clean map min=-0.10666 max=4.1705 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.990002 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 0.99 ! LA 1.00 MK 1.02 NL 1.20 OV 0.99 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.995909 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.01 KP 0.99 ! LA 0.98 MK 0.98 NL 1.20 OV 1.03 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.991251 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.00 KP 0.97 ! LA 0.98 MK 1.00 NL 1.18 OV 0.98 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.988707 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.03 KP 0.97 ! LA 0.98 MK 0.97 NL 1.20 OV 0.99 ! PT 0.95 SC 1.04 ! ! ! Fit before self-cal, rms=1.269411Jy sigma=0.006674 ! Fit after self-cal, rms=1.284019Jy sigma=0.006263 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.284019Jy sigma=0.006263 ! Fit after self-cal, rms=1.284033Jy sigma=0.006263 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.267 mas, bmaj=3.174 mas, bpa=13.21 degrees ! Estimated noise=793.466 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.101193 Jy ! Component: 100 - total flux cleaned = -0.114065 Jy ! Component: 150 - total flux cleaned = -0.121246 Jy ! Component: 200 - total flux cleaned = -0.122728 Jy ! Total flux subtracted in 200 components = -0.122728 Jy ! Clean residual min=-0.107023 max=0.106674 Jy/beam ! Clean residual mean=0.000998 rms=0.031419 Jy/beam ! Combined flux in latest and established models = 4.57236 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 4.57236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.263299Jy sigma=0.006172 ! Fit after self-cal, rms=1.262609Jy sigma=0.006168 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.262609Jy sigma=0.006168 ! Fit after self-cal, rms=0.736180Jy sigma=0.003756 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0767188 Jy ! Component: 100 - total flux cleaned = 0.0784402 Jy ! Component: 150 - total flux cleaned = 0.0784106 Jy ! Component: 200 - total flux cleaned = 0.0772141 Jy ! Total flux subtracted in 200 components = 0.0772141 Jy ! Clean residual min=-0.096821 max=0.082457 Jy/beam ! Clean residual mean=0.000448 rms=0.024942 Jy/beam ! Combined flux in latest and established models = 4.64957 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 4.64957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.734124Jy sigma=0.003698 ! Fit after self-cal, rms=0.675795Jy sigma=0.003416 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.267 x 3.174 at 13.21 degrees (North through East) ! Clean map min=-0.086982 max=4.1965 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.675795Jy sigma=0.003416 ! Fit after self-cal, rms=0.538912Jy sigma=0.002487 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.538912Jy sigma=0.002487 ! Fit after self-cal, rms=0.523840Jy sigma=0.002426 ! Inverting map and beam ! Estimated beam: bmin=1.264 mas, bmaj=3.157 mas, bpa=13.79 degrees ! Estimated noise=788.079 mJy/beam. ! Added new window around map position (1.6, -2.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418341 Jy ! Component: 100 - total flux cleaned = 0.0429638 Jy ! Component: 150 - total flux cleaned = 0.0439282 Jy ! Component: 200 - total flux cleaned = 0.0447611 Jy ! Total flux subtracted in 200 components = 0.0447611 Jy ! Clean residual min=-0.020624 max=0.020128 Jy/beam ! Clean residual mean=-0.000233 rms=0.005099 Jy/beam ! Combined flux in latest and established models = 4.69433 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 4.69433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518474Jy sigma=0.002378 ! Fit after self-cal, rms=0.513753Jy sigma=0.002358 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513753Jy sigma=0.002358 ! Fit after self-cal, rms=0.502804Jy sigma=0.002332 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.502804Jy sigma=0.002332 ! Fit after self-cal, rms=0.500803Jy sigma=0.002325 ! Inverting map and beam ! Estimated beam: bmin=1.26 mas, bmaj=3.148 mas, bpa=13.76 degrees ! Estimated noise=787.533 mJy/beam. ! Added new window around map position (-1, -4.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123979 Jy ! Component: 100 - total flux cleaned = 0.0148987 Jy ! Component: 150 - total flux cleaned = 0.0156385 Jy ! Component: 200 - total flux cleaned = 0.0162613 Jy ! Total flux subtracted in 200 components = 0.0162613 Jy ! Clean residual min=-0.012231 max=0.015222 Jy/beam ! Clean residual mean=-0.000177 rms=0.003846 Jy/beam ! Combined flux in latest and established models = 4.71059 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 4.71059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.498566Jy sigma=0.002307 ! Fit after self-cal, rms=0.497585Jy sigma=0.002303 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.386 mas, bmaj=4.723 mas, bpa=11.96 degrees ! Estimated noise=906.574 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000556992 Jy ! Component: 100 - total flux cleaned = -0.00259108 Jy ! Component: 150 - total flux cleaned = -0.00398581 Jy ! Component: 200 - total flux cleaned = -0.00423133 Jy ! Total flux subtracted in 200 components = -0.00423133 Jy ! Clean residual min=-0.011108 max=0.013096 Jy/beam ! Clean residual mean=-0.000225 rms=0.003820 Jy/beam ! Combined flux in latest and established models = 4.70636 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 97 components and 4.70636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.497192Jy sigma=0.002299 ! Fit after self-cal, rms=0.496717Jy sigma=0.002297 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9633 mas, bmaj=2.795 mas, bpa=18.05 degrees ! Estimated noise=1077.76 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.55176 Jy ! Component: 100 - total flux cleaned = 4.17725 Jy ! Component: 150 - total flux cleaned = 4.4506 Jy ! Component: 200 - total flux cleaned = 4.59473 Jy ! Total flux subtracted in 200 components = 4.59473 Jy ! Clean residual min=-0.046668 max=0.053595 Jy/beam ! Clean residual mean=0.000181 rms=0.011306 Jy/beam ! Combined flux in latest and established models = 4.59473 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 4.59473 Jy ! Inverting map and beam ! Estimated beam: bmin=1.26 mas, bmaj=3.148 mas, bpa=13.76 degrees ! Estimated noise=787.533 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.101314 Jy ! Component: 100 - total flux cleaned = 0.118716 Jy ! Component: 150 - total flux cleaned = 0.124925 Jy ! Component: 200 - total flux cleaned = 0.125117 Jy ! Total flux subtracted in 200 components = 0.125117 Jy ! Clean residual min=-0.020878 max=0.018294 Jy/beam ! Clean residual mean=-0.000269 rms=0.004889 Jy/beam ! Combined flux in latest and established models = 4.71985 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 43 components and 4.71985 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.386 mas, bmaj=4.723 mas, bpa=11.96 degrees ! Estimated noise=906.574 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00292696 Jy ! Component: 100 - total flux cleaned = -0.00357788 Jy ! Component: 150 - total flux cleaned = -0.00463218 Jy ! Component: 200 - total flux cleaned = -0.00467199 Jy ! Total flux subtracted in 200 components = -0.00467199 Jy ! Clean residual min=-0.012231 max=0.011756 Jy/beam ! Clean residual mean=-0.000358 rms=0.003906 Jy/beam ! Combined flux in latest and established models = 4.71517 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 61 components and 4.71517 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.26 mas, bmaj=3.148 mas, bpa=13.76 degrees ! Estimated noise=787.533 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120392 Jy ! Component: 100 - total flux cleaned = -0.00118557 Jy ! Component: 150 - total flux cleaned = -0.002348 Jy ! Component: 200 - total flux cleaned = -0.00236183 Jy ! Total flux subtracted in 200 components = -0.00236183 Jy ! Clean residual min=-0.012081 max=0.011067 Jy/beam ! Clean residual mean=-0.000195 rms=0.003517 Jy/beam ! Combined flux in latest and established models = 4.71281 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 80 components and 4.71281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.496863Jy sigma=0.002297 ! Fit after self-cal, rms=0.496425Jy sigma=0.002294 wmodel J1337-1257_X_1997_05_07_yyk\_map.mod ! Writing 80 model components to file: J1337-1257_X_1997_05_07_yyk_map.mod wobs J1337-1257_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1337-1257_X_1997_05_07_yyk_uvs.fits wwins J1337-1257_X_1997_05_07_yyk\_map.win ! wwins: Wrote 3 windows to J1337-1257_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00350325 Jy ! Component: 100 - total flux cleaned = -0.00652363 Jy ! Component: 150 - total flux cleaned = -0.00803106 Jy ! Component: 200 - total flux cleaned = -0.00892727 Jy ! Component: 250 - total flux cleaned = -0.0090996 Jy ! Component: 300 - total flux cleaned = -0.00893579 Jy ! Component: 350 - total flux cleaned = -0.00877396 Jy ! Component: 400 - total flux cleaned = -0.00861642 Jy ! Component: 450 - total flux cleaned = -0.00861472 Jy ! Component: 500 - total flux cleaned = -0.00876061 Jy ! Component: 550 - total flux cleaned = -0.00917991 Jy ! Component: 600 - total flux cleaned = -0.00931781 Jy ! Component: 650 - total flux cleaned = -0.00958516 Jy ! Component: 700 - total flux cleaned = -0.00984539 Jy ! Component: 750 - total flux cleaned = -0.00971705 Jy ! Component: 800 - total flux cleaned = -0.00947016 Jy ! Component: 850 - total flux cleaned = -0.00959215 Jy ! Component: 900 - total flux cleaned = -0.00959107 Jy ! Component: 950 - total flux cleaned = -0.00947175 Jy ! Component: 1000 - total flux cleaned = -0.009134 Jy ! Component: 1050 - total flux cleaned = -0.00913661 Jy ! Component: 1100 - total flux cleaned = -0.00935607 Jy ! Component: 1150 - total flux cleaned = -0.00967456 Jy ! Component: 1200 - total flux cleaned = -0.00977841 Jy ! Component: 1250 - total flux cleaned = -0.00988211 Jy ! Component: 1300 - total flux cleaned = -0.010181 Jy ! Component: 1350 - total flux cleaned = -0.0103769 Jy ! Component: 1400 - total flux cleaned = -0.0102826 Jy ! Component: 1450 - total flux cleaned = -0.0105668 Jy ! Component: 1500 - total flux cleaned = -0.0106601 Jy ! Component: 1550 - total flux cleaned = -0.0106621 Jy ! Component: 1600 - total flux cleaned = -0.0108424 Jy ! Component: 1650 - total flux cleaned = -0.010755 Jy ! Component: 1700 - total flux cleaned = -0.0109299 Jy ! Component: 1750 - total flux cleaned = -0.0108421 Jy ! Component: 1800 - total flux cleaned = -0.0106734 Jy ! Component: 1850 - total flux cleaned = -0.0105889 Jy ! Component: 1900 - total flux cleaned = -0.0104248 Jy ! Component: 1950 - total flux cleaned = -0.0100236 Jy ! Component: 2000 - total flux cleaned = -0.00994562 Jy ! Total flux subtracted in 2048 components = -0.00986779 Jy ! Clean residual min=-0.004497 max=0.004190 Jy/beam ! Clean residual mean=-0.000069 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 4.70295 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 217 components and 4.70294 Jy ![Exited script file: muppet] wmap "J1337-1257_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.26 x 3.148 at 13.76 degrees (North through East) ! Clean map min=-0.022542 max=4.1678 Jy/beam ! Writing clean map to FITS file: J1337-1257_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.16783 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00171429 device "J1337-1257_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1337-1257_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.123394 0.123394 0.246789 0.493578 0.987155 1.97431 3.94862 7.89724 15.7945 31.589 63.1779 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0051 print "peak=",int(peak_flux*1000)/1000 ! peak= 4.167 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.26 x 3.148 at 13.76 degrees (North through East) ! Clean map min=-0.022542 max=4.1678 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1337-1257_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1337-1257_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1337-1257_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 06:09:50 2007