! Started logfile: J1337-1257_S_1997_05_07_yyk_uvs.log on Sun Jan 7 18:22:49 2007 obs J1337-1257_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1337-1257_S_1997_05_07_yyk_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.696296 visibilities/baseline/integration-bin. ! Found source: J1337-1257 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 18048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1337-1257_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.82572 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=9.608 mas, bpa=14.33 degrees ! Estimated noise=1995.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.31182 Jy ! Component: 100 - total flux cleaned = 2.73074 Jy ! Total flux subtracted in 100 components = 2.73074 Jy ! Clean residual min=-0.075940 max=0.106224 Jy/beam ! Clean residual mean=0.004527 rms=0.025181 Jy/beam ! Combined flux in latest and established models = 2.73074 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.73074 Jy ! ! Correcting IF 1. ! A total of 378 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.546735Jy sigma=0.002118 ! Fit after self-cal, rms=0.545937Jy sigma=0.002114 ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=9.608 mas, bpa=14.33 degrees ! Estimated noise=1995.22 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.829 mas, bmaj=11.91 mas, bpa=11.69 degrees ! Estimated noise=1236.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.125624 Jy ! Component: 100 - total flux cleaned = 0.17617 Jy ! Component: 150 - total flux cleaned = 0.194442 Jy ! Component: 200 - total flux cleaned = 0.196559 Jy ! Total flux subtracted in 200 components = 0.196559 Jy ! Clean residual min=-0.049316 max=0.088869 Jy/beam ! Clean residual mean=0.004952 rms=0.021699 Jy/beam ! Combined flux in latest and established models = 2.92729 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 2.92729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513977Jy sigma=0.002018 ! Fit after self-cal, rms=0.513898Jy sigma=0.002018 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.829 x 11.91 at 11.69 degrees (North through East) ! Clean map min=-0.047365 max=2.7012 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02361 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.06 HN 0.99 KP 0.90 ! LA 0.99 MK 0.97 NL 1.00* OV 1.09 ! PT 0.95 SC 0.88 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.975096 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.13 HN 1.09 KP 1.01 ! LA 1.08 MK 1.03 NL 0.99 OV 1.02 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.04311 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.06 HN 0.96 KP 0.91 ! LA 0.81 MK 0.86 NL 0.96 OV 0.95 ! PT 1.07 SC 1.08 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.986792 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.13 HN 1.08 KP 0.95 ! LA 0.88 MK 1.02 NL 1.06 OV 1.07 ! PT 0.91 SC 1.08 ! ! ! Fit before self-cal, rms=0.513898Jy sigma=0.002018 ! Fit after self-cal, rms=0.416633Jy sigma=0.001638 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416633Jy sigma=0.001638 ! Fit after self-cal, rms=0.416635Jy sigma=0.001638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.837 mas, bmaj=11.81 mas, bpa=11.5 degrees ! Estimated noise=1239.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105427 Jy ! Component: 100 - total flux cleaned = 0.0092922 Jy ! Component: 150 - total flux cleaned = 0.00874767 Jy ! Component: 200 - total flux cleaned = 0.00875094 Jy ! Total flux subtracted in 200 components = 0.00875094 Jy ! Clean residual min=-0.019373 max=0.022420 Jy/beam ! Clean residual mean=0.000419 rms=0.006704 Jy/beam ! Combined flux in latest and established models = 2.93605 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 2.93605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.414482Jy sigma=0.001631 ! Fit after self-cal, rms=0.414427Jy sigma=0.001631 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.414427Jy sigma=0.001631 ! Fit after self-cal, rms=0.359918Jy sigma=0.001453 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587497 Jy ! Component: 100 - total flux cleaned = 0.00628171 Jy ! Component: 150 - total flux cleaned = 0.00667648 Jy ! Component: 200 - total flux cleaned = 0.0074203 Jy ! Total flux subtracted in 200 components = 0.0074203 Jy ! Clean residual min=-0.018475 max=0.021620 Jy/beam ! Clean residual mean=0.000305 rms=0.006290 Jy/beam ! Combined flux in latest and established models = 2.94347 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 2.94347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358770Jy sigma=0.001450 ! Fit after self-cal, rms=0.353862Jy sigma=0.001433 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.837 x 11.81 at 11.5 degrees (North through East) ! Clean map min=-0.017958 max=2.7302 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353862Jy sigma=0.001433 ! Fit after self-cal, rms=0.310919Jy sigma=0.001241 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310919Jy sigma=0.001241 ! Fit after self-cal, rms=0.309907Jy sigma=0.001237 ! Inverting map and beam ! Estimated beam: bmin=4.824 mas, bmaj=11.78 mas, bpa=11.55 degrees ! Estimated noise=1236.06 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118465 Jy ! Component: 100 - total flux cleaned = -0.00152304 Jy ! Component: 150 - total flux cleaned = -0.00118627 Jy ! Component: 200 - total flux cleaned = -0.000880242 Jy ! Total flux subtracted in 200 components = -0.000880242 Jy ! Clean residual min=-0.012868 max=0.018143 Jy/beam ! Clean residual mean=0.000482 rms=0.004259 Jy/beam ! Combined flux in latest and established models = 2.94259 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 2.94259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308972Jy sigma=0.001234 ! Fit after self-cal, rms=0.308608Jy sigma=0.001233 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308608Jy sigma=0.001233 ! Fit after self-cal, rms=0.307513Jy sigma=0.001230 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307513Jy sigma=0.001230 ! Fit after self-cal, rms=0.307397Jy sigma=0.001229 ! Inverting map and beam ! Estimated beam: bmin=4.816 mas, bmaj=11.77 mas, bpa=11.5 degrees ! Estimated noise=1235.91 mJy/beam. ! Added new window around map position (15, -18). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227891 Jy ! Component: 100 - total flux cleaned = 0.0272569 Jy ! Component: 150 - total flux cleaned = 0.029999 Jy ! Component: 200 - total flux cleaned = 0.0307814 Jy ! Total flux subtracted in 200 components = 0.0307814 Jy ! Clean residual min=-0.013150 max=0.010444 Jy/beam ! Clean residual mean=-0.000150 rms=0.002895 Jy/beam ! Combined flux in latest and established models = 2.97337 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 82 components and 2.97337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305490Jy sigma=0.001222 ! Fit after self-cal, rms=0.305381Jy sigma=0.001221 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.31 mas, bmaj=16.62 mas, bpa=11.8 degrees ! Estimated noise=1393.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000445533 Jy ! Component: 100 - total flux cleaned = 0.001333 Jy ! Component: 150 - total flux cleaned = 0.00150301 Jy ! Component: 200 - total flux cleaned = 0.00166694 Jy ! Total flux subtracted in 200 components = 0.00166694 Jy ! Clean residual min=-0.009152 max=0.007019 Jy/beam ! Clean residual mean=-0.000267 rms=0.002366 Jy/beam ! Combined flux in latest and established models = 2.97503 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 111 components and 2.97503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305286Jy sigma=0.001221 ! Fit after self-cal, rms=0.305240Jy sigma=0.001221 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=9.573 mas, bpa=14.45 degrees ! Estimated noise=1997.54 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.32238 Jy ! Component: 100 - total flux cleaned = 2.74635 Jy ! Component: 150 - total flux cleaned = 2.8633 Jy ! Component: 200 - total flux cleaned = 2.91251 Jy ! Total flux subtracted in 200 components = 2.91251 Jy ! Clean residual min=-0.024362 max=0.028858 Jy/beam ! Clean residual mean=0.000536 rms=0.007417 Jy/beam ! Combined flux in latest and established models = 2.91251 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 2.91251 Jy ! Inverting map and beam ! Estimated beam: bmin=4.816 mas, bmaj=11.77 mas, bpa=11.5 degrees ! Estimated noise=1235.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -4.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316033 Jy ! Component: 100 - total flux cleaned = 0.05069 Jy ! Component: 150 - total flux cleaned = 0.0538995 Jy ! Component: 200 - total flux cleaned = 0.0556204 Jy ! Total flux subtracted in 200 components = 0.0556204 Jy ! Clean residual min=-0.010882 max=0.011901 Jy/beam ! Clean residual mean=-0.000045 rms=0.003280 Jy/beam ! Combined flux in latest and established models = 2.96813 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 52 components and 2.96813 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.31 mas, bmaj=16.62 mas, bpa=11.8 degrees ! Estimated noise=1393.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476568 Jy ! Component: 100 - total flux cleaned = 0.005626 Jy ! Component: 150 - total flux cleaned = 0.00598391 Jy ! Component: 200 - total flux cleaned = 0.00597864 Jy ! Total flux subtracted in 200 components = 0.00597864 Jy ! Clean residual min=-0.007631 max=0.006211 Jy/beam ! Clean residual mean=-0.000242 rms=0.002151 Jy/beam ! Combined flux in latest and established models = 2.97411 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 82 components and 2.97411 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.816 mas, bmaj=11.77 mas, bpa=11.5 degrees ! Estimated noise=1235.91 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167334 Jy ! Component: 100 - total flux cleaned = -0.000749945 Jy ! Component: 150 - total flux cleaned = -0.000749527 Jy ! Component: 200 - total flux cleaned = 8.34211e-05 Jy ! Total flux subtracted in 200 components = 8.34211e-05 Jy ! Clean residual min=-0.010049 max=0.010994 Jy/beam ! Clean residual mean=-0.000161 rms=0.002839 Jy/beam ! Combined flux in latest and established models = 2.97419 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 100 components and 2.97419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306935Jy sigma=0.001225 ! Fit after self-cal, rms=0.306880Jy sigma=0.001225 wmodel J1337-1257_S_1997_05_07_yyk\_map.mod ! Writing 100 model components to file: J1337-1257_S_1997_05_07_yyk_map.mod wobs J1337-1257_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1337-1257_S_1997_05_07_yyk_uvs.fits wwins J1337-1257_S_1997_05_07_yyk\_map.win ! wwins: Wrote 3 windows to J1337-1257_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258808 Jy ! Component: 100 - total flux cleaned = 0.00417131 Jy ! Component: 150 - total flux cleaned = 0.00562174 Jy ! Component: 200 - total flux cleaned = 0.00713562 Jy ! Component: 250 - total flux cleaned = 0.00814061 Jy ! Component: 300 - total flux cleaned = 0.00882582 Jy ! Component: 350 - total flux cleaned = 0.00896157 Jy ! Component: 400 - total flux cleaned = 0.00946998 Jy ! Component: 450 - total flux cleaned = 0.00959156 Jy ! Component: 500 - total flux cleaned = 0.00982994 Jy ! Component: 550 - total flux cleaned = 0.0100655 Jy ! Component: 600 - total flux cleaned = 0.0102983 Jy ! Component: 650 - total flux cleaned = 0.0106361 Jy ! Component: 700 - total flux cleaned = 0.0108556 Jy ! Component: 750 - total flux cleaned = 0.0111802 Jy ! Component: 800 - total flux cleaned = 0.0110723 Jy ! Component: 850 - total flux cleaned = 0.0111773 Jy ! Component: 900 - total flux cleaned = 0.0111762 Jy ! Component: 950 - total flux cleaned = 0.0111766 Jy ! Component: 1000 - total flux cleaned = 0.011078 Jy ! Component: 1050 - total flux cleaned = 0.0109812 Jy ! Component: 1100 - total flux cleaned = 0.0109823 Jy ! Component: 1150 - total flux cleaned = 0.0108889 Jy ! Component: 1200 - total flux cleaned = 0.0107963 Jy ! Component: 1250 - total flux cleaned = 0.0107965 Jy ! Component: 1300 - total flux cleaned = 0.0107065 Jy ! Component: 1350 - total flux cleaned = 0.0105276 Jy ! Component: 1400 - total flux cleaned = 0.0105278 Jy ! Component: 1450 - total flux cleaned = 0.0102662 Jy ! Component: 1500 - total flux cleaned = 0.0101787 Jy ! Component: 1550 - total flux cleaned = 0.00992415 Jy ! Component: 1600 - total flux cleaned = 0.00983968 Jy ! Component: 1650 - total flux cleaned = 0.00967297 Jy ! Component: 1700 - total flux cleaned = 0.00926466 Jy ! Component: 1750 - total flux cleaned = 0.00902337 Jy ! Component: 1800 - total flux cleaned = 0.00870671 Jy ! Component: 1850 - total flux cleaned = 0.00870761 Jy ! Component: 1900 - total flux cleaned = 0.00855273 Jy ! Component: 1950 - total flux cleaned = 0.00824505 Jy ! Component: 2000 - total flux cleaned = 0.00786691 Jy ! Total flux subtracted in 2048 components = 0.00779211 Jy ! Clean residual min=-0.003719 max=0.003975 Jy/beam ! Clean residual mean=-0.000152 rms=0.001585 Jy/beam ! Combined flux in latest and established models = 2.98199 Jy keep ! Adding 119 model components to the UV plane model. ! The established model now contains 217 components and 2.98199 Jy ![Exited script file: muppet] wmap "J1337-1257_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.816 x 11.77 at 11.5 degrees (North through East) ! Clean map min=-0.008274 max=2.7317 Jy/beam ! Writing clean map to FITS file: J1337-1257_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.73168 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00157575 device "J1337-1257_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1337-1257_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.173053 0.173053 0.346107 0.692213 1.38443 2.76885 5.53771 11.0754 22.1508 44.3016 88.6033 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0047 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.731 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.816 x 11.77 at 11.5 degrees (North through East) ! Clean map min=-0.008274 max=2.7317 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1337-1257_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1337-1257_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1337-1257_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 18:22:56 2007