! Started logfile: J1335-0511_X_1997_05_07_yyk_uvs.log on Mon Jan 8 06:08:16 2007 obs J1335-0511_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1335-0511_X_1997_05_07_yyk_uva.fits ! AN table 1: 139 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.695444 visibilities/baseline/integration-bin. ! Found source: J1335-0511 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 17400 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1335-0511_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.294602 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.043 mas, bmaj=2.259 mas, bpa=8.866 degrees ! Estimated noise=1292.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.19237 Jy ! Component: 100 - total flux cleaned = 0.226874 Jy ! Total flux subtracted in 100 components = 0.226874 Jy ! Clean residual min=-0.010028 max=0.013331 Jy/beam ! Clean residual mean=0.000137 rms=0.003327 Jy/beam ! Combined flux in latest and established models = 0.226874 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.226874 Jy ! ! Correcting IF 1. ! A total of 225 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 225 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 225 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 225 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.181540Jy sigma=0.001230 ! Fit after self-cal, rms=0.181423Jy sigma=0.001229 ! Inverting map and beam ! Estimated beam: bmin=1.043 mas, bmaj=2.259 mas, bpa=8.866 degrees ! Estimated noise=1292.3 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.281 mas, bmaj=2.708 mas, bpa=7.943 degrees ! Estimated noise=772.789 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222528 Jy ! Component: 100 - total flux cleaned = 0.0310666 Jy ! Component: 150 - total flux cleaned = 0.0354034 Jy ! Component: 200 - total flux cleaned = 0.0372052 Jy ! Total flux subtracted in 200 components = 0.0372052 Jy ! Clean residual min=-0.006808 max=0.012080 Jy/beam ! Clean residual mean=0.000208 rms=0.002131 Jy/beam ! Combined flux in latest and established models = 0.26408 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 52 components and 0.26408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180019Jy sigma=0.001216 ! Fit after self-cal, rms=0.180011Jy sigma=0.001216 ! Inverting map ! Added new window around map position (3.2, 4.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129756 Jy ! Component: 100 - total flux cleaned = 0.0169038 Jy ! Component: 150 - total flux cleaned = 0.0188621 Jy ! Component: 200 - total flux cleaned = 0.0204344 Jy ! Total flux subtracted in 200 components = 0.0204344 Jy ! Clean residual min=-0.005663 max=0.006959 Jy/beam ! Clean residual mean=0.000149 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.284514 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 91 components and 0.284514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179336Jy sigma=0.001211 ! Fit after self-cal, rms=0.179215Jy sigma=0.001211 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.281 x 2.708 at 7.943 degrees (North through East) ! Clean map min=-0.0050683 max=0.22357 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.99814 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.95 KP 1.01 ! LA 1.02 MK 1.02 NL 1.09 OV 1.03 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.993414 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.07 KP 1.03 ! LA 1.02 MK 0.94 NL 1.10 OV 1.02 ! PT 0.88 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00585 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 1.01 KP 1.00 ! LA 0.98 MK 0.97 NL 1.00 OV 0.99 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.986704 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.02 KP 1.02 ! LA 0.98 MK 0.99 NL 1.07 OV 1.01 ! PT 0.98 SC 1.05 ! ! ! Fit before self-cal, rms=0.179215Jy sigma=0.001211 ! Fit after self-cal, rms=0.179959Jy sigma=0.001207 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179959Jy sigma=0.001207 ! Fit after self-cal, rms=0.179960Jy sigma=0.001207 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.276 mas, bmaj=2.702 mas, bpa=7.642 degrees ! Estimated noise=769.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311266 Jy ! Component: 100 - total flux cleaned = 0.00042971 Jy ! Component: 150 - total flux cleaned = 0.000139794 Jy ! Component: 200 - total flux cleaned = 1.48968e-05 Jy ! Total flux subtracted in 200 components = 1.48968e-05 Jy ! Clean residual min=-0.003633 max=0.002835 Jy/beam ! Clean residual mean=0.000094 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.284529 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 114 components and 0.284529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179892Jy sigma=0.001207 ! Fit after self-cal, rms=0.179883Jy sigma=0.001207 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179883Jy sigma=0.001207 ! Fit after self-cal, rms=0.178885Jy sigma=0.001200 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103056 Jy ! Component: 100 - total flux cleaned = 0.00103308 Jy ! Component: 150 - total flux cleaned = 0.00107896 Jy ! Component: 200 - total flux cleaned = 0.00115764 Jy ! Total flux subtracted in 200 components = 0.00115764 Jy ! Clean residual min=-0.003532 max=0.002774 Jy/beam ! Clean residual mean=0.000095 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.285687 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 124 components and 0.285687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178863Jy sigma=0.001200 ! Fit after self-cal, rms=0.178698Jy sigma=0.001199 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.276 x 2.702 at 7.642 degrees (North through East) ! Clean map min=-0.0033202 max=0.22341 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178698Jy sigma=0.001199 ! Fit after self-cal, rms=0.178787Jy sigma=0.001198 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178787Jy sigma=0.001198 ! Fit after self-cal, rms=0.178740Jy sigma=0.001198 ! Inverting map and beam ! Estimated beam: bmin=1.278 mas, bmaj=2.695 mas, bpa=7.641 degrees ! Estimated noise=768.382 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102764 Jy ! Component: 100 - total flux cleaned = 0.00134484 Jy ! Component: 150 - total flux cleaned = 0.00149901 Jy ! Component: 200 - total flux cleaned = 0.00163466 Jy ! Total flux subtracted in 200 components = 0.00163466 Jy ! Clean residual min=-0.002977 max=0.002476 Jy/beam ! Clean residual mean=0.000079 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.287321 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 138 components and 0.287321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178723Jy sigma=0.001197 ! Fit after self-cal, rms=0.178705Jy sigma=0.001197 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178705Jy sigma=0.001197 ! Fit after self-cal, rms=0.178939Jy sigma=0.001196 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178939Jy sigma=0.001196 ! Fit after self-cal, rms=0.178931Jy sigma=0.001196 ! Inverting map and beam ! Estimated beam: bmin=1.277 mas, bmaj=2.694 mas, bpa=7.748 degrees ! Estimated noise=769.047 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00096059 Jy ! Component: 100 - total flux cleaned = 0.00127103 Jy ! Component: 150 - total flux cleaned = 0.0013593 Jy ! Component: 200 - total flux cleaned = 0.00144097 Jy ! Total flux subtracted in 200 components = 0.00144097 Jy ! Clean residual min=-0.002911 max=0.002454 Jy/beam ! Clean residual mean=0.000079 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.288762 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 145 components and 0.288762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178923Jy sigma=0.001196 ! Fit after self-cal, rms=0.178919Jy sigma=0.001196 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=4.167 mas, bpa=9.648 degrees ! Estimated noise=891.509 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036651 Jy ! Component: 100 - total flux cleaned = 0.000582024 Jy ! Component: 150 - total flux cleaned = 0.0006226 Jy ! Component: 200 - total flux cleaned = 0.000658426 Jy ! Total flux subtracted in 200 components = 0.000658426 Jy ! Clean residual min=-0.002280 max=0.002413 Jy/beam ! Clean residual mean=0.000125 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.289421 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 154 components and 0.289421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178918Jy sigma=0.001196 ! Fit after self-cal, rms=0.178915Jy sigma=0.001196 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.041 mas, bmaj=2.255 mas, bpa=8.747 degrees ! Estimated noise=1449.31 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.194306 Jy ! Component: 100 - total flux cleaned = 0.231161 Jy ! Component: 150 - total flux cleaned = 0.250373 Jy ! Component: 200 - total flux cleaned = 0.263467 Jy ! Total flux subtracted in 200 components = 0.263467 Jy ! Clean residual min=-0.007573 max=0.007361 Jy/beam ! Clean residual mean=0.000071 rms=0.002417 Jy/beam ! Combined flux in latest and established models = 0.263467 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.263467 Jy ! Inverting map and beam ! Estimated beam: bmin=1.277 mas, bmaj=2.694 mas, bpa=7.748 degrees ! Estimated noise=769.047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102568 Jy ! Component: 100 - total flux cleaned = 0.0160523 Jy ! Component: 150 - total flux cleaned = 0.0198281 Jy ! Component: 200 - total flux cleaned = 0.0222983 Jy ! Total flux subtracted in 200 components = 0.0222983 Jy ! Clean residual min=-0.003172 max=0.002812 Jy/beam ! Clean residual mean=0.000088 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.285765 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 68 components and 0.285765 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=4.167 mas, bpa=9.648 degrees ! Estimated noise=891.509 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183208 Jy ! Component: 100 - total flux cleaned = 0.00240055 Jy ! Component: 150 - total flux cleaned = 0.00270925 Jy ! Component: 200 - total flux cleaned = 0.00285516 Jy ! Total flux subtracted in 200 components = 0.00285516 Jy ! Clean residual min=-0.002470 max=0.002497 Jy/beam ! Clean residual mean=0.000130 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.28862 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.28862 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.277 mas, bmaj=2.694 mas, bpa=7.748 degrees ! Estimated noise=769.047 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000416956 Jy ! Component: 100 - total flux cleaned = -0.000356522 Jy ! Component: 150 - total flux cleaned = -0.000452353 Jy ! Component: 200 - total flux cleaned = -0.00049657 Jy ! Total flux subtracted in 200 components = -0.00049657 Jy ! Clean residual min=-0.003099 max=0.002443 Jy/beam ! Clean residual mean=0.000081 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.288123 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 97 components and 0.288123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178962Jy sigma=0.001196 ! Fit after self-cal, rms=0.178949Jy sigma=0.001196 wmodel J1335-0511_X_1997_05_07_yyk\_map.mod ! Writing 97 model components to file: J1335-0511_X_1997_05_07_yyk_map.mod wobs J1335-0511_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1335-0511_X_1997_05_07_yyk_uvs.fits wwins J1335-0511_X_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J1335-0511_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105238 Jy ! Component: 100 - total flux cleaned = -0.00105531 Jy ! Component: 150 - total flux cleaned = -0.000972251 Jy ! Component: 200 - total flux cleaned = -0.000772601 Jy ! Component: 250 - total flux cleaned = -0.000505638 Jy ! Component: 300 - total flux cleaned = -0.000177108 Jy ! Component: 350 - total flux cleaned = 0.000105498 Jy ! Component: 400 - total flux cleaned = 0.000378633 Jy ! Component: 450 - total flux cleaned = 0.000577955 Jy ! Component: 500 - total flux cleaned = 0.000867727 Jy ! Component: 550 - total flux cleaned = 0.000992494 Jy ! Component: 600 - total flux cleaned = 0.00120652 Jy ! Component: 650 - total flux cleaned = 0.0014156 Jy ! Component: 700 - total flux cleaned = 0.00164916 Jy ! Component: 750 - total flux cleaned = 0.00184959 Jy ! Component: 800 - total flux cleaned = 0.0021304 Jy ! Component: 850 - total flux cleaned = 0.00232322 Jy ! Component: 900 - total flux cleaned = 0.00253927 Jy ! Component: 950 - total flux cleaned = 0.00269852 Jy ! Component: 1000 - total flux cleaned = 0.00288107 Jy ! Component: 1050 - total flux cleaned = 0.00300945 Jy ! Component: 1100 - total flux cleaned = 0.00308559 Jy ! Component: 1150 - total flux cleaned = 0.00318554 Jy ! Component: 1200 - total flux cleaned = 0.0033082 Jy ! Component: 1250 - total flux cleaned = 0.00338067 Jy ! Component: 1300 - total flux cleaned = 0.00345252 Jy ! Component: 1350 - total flux cleaned = 0.00354702 Jy ! Component: 1400 - total flux cleaned = 0.00368672 Jy ! Component: 1450 - total flux cleaned = 0.00380163 Jy ! Component: 1500 - total flux cleaned = 0.00391482 Jy ! Component: 1550 - total flux cleaned = 0.00395971 Jy ! Component: 1600 - total flux cleaned = 0.00411385 Jy ! Component: 1650 - total flux cleaned = 0.00415703 Jy ! Component: 1700 - total flux cleaned = 0.00417822 Jy ! Component: 1750 - total flux cleaned = 0.00419951 Jy ! Component: 1800 - total flux cleaned = 0.00426224 Jy ! Component: 1850 - total flux cleaned = 0.00422071 Jy ! Component: 1900 - total flux cleaned = 0.00430277 Jy ! Component: 1950 - total flux cleaned = 0.00436349 Jy ! Component: 2000 - total flux cleaned = 0.0044234 Jy ! Total flux subtracted in 2048 components = 0.00448287 Jy ! Clean residual min=-0.001238 max=0.001220 Jy/beam ! Clean residual mean=0.000049 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.292606 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 222 components and 0.292606 Jy ![Exited script file: muppet] wmap "J1335-0511_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.277 x 2.694 at 7.748 degrees (North through East) ! Clean map min=-0.002277 max=0.22428 Jy/beam ! Writing clean map to FITS file: J1335-0511_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.224282 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000371654 device "J1335-0511_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1335-0511_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.497125 0.497125 0.994251 1.9885 3.977 7.95401 15.908 31.816 63.632 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.224 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.277 x 2.694 at 7.748 degrees (North through East) ! Clean map min=-0.002277 max=0.22428 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1335-0511_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1335-0511_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1335-0511_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 06:08:25 2007