! Started logfile: J1321-2636_X_1997_07_02_yyk_uvs.log on Mon Jan 8 06:03:17 2007 obs J1321-2636_X_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1321-2636_X_1997_07_02_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.806954 visibilities/baseline/integration-bin. ! Found source: J1321-2636 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 753 lines of history. ! ! Reading 21352 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1321-2636_X_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.273941 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6815 mas, bmaj=1.851 mas, bpa=-5.19 degrees ! Estimated noise=1685.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0991723 Jy ! Component: 100 - total flux cleaned = 0.130141 Jy ! Total flux subtracted in 100 components = 0.130141 Jy ! Clean residual min=-0.011858 max=0.012764 Jy/beam ! Clean residual mean=-0.000101 rms=0.003320 Jy/beam ! Combined flux in latest and established models = 0.130141 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.130141 Jy ! ! Correcting IF 1. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.242118Jy sigma=0.001336 ! Fit after self-cal, rms=0.241876Jy sigma=0.001335 ! Inverting map and beam ! Estimated beam: bmin=0.6815 mas, bmaj=1.851 mas, bpa=-5.19 degrees ! Estimated noise=1685.15 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9143 mas, bmaj=2.714 mas, bpa=-8.049 degrees ! Estimated noise=771.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272753 Jy ! Component: 100 - total flux cleaned = 0.0381296 Jy ! Component: 150 - total flux cleaned = 0.0426695 Jy ! Component: 200 - total flux cleaned = 0.0438715 Jy ! Total flux subtracted in 200 components = 0.0438715 Jy ! Clean residual min=-0.007967 max=0.008839 Jy/beam ! Clean residual mean=-0.000124 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.174012 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 44 components and 0.174012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240371Jy sigma=0.001321 ! Fit after self-cal, rms=0.240353Jy sigma=0.001321 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9143 x 2.714 at -8.049 degrees (North through East) ! Clean map min=-0.007566 max=0.11437 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.240353Jy sigma=0.001321 ! Fit after self-cal, rms=0.240353Jy sigma=0.001321 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240353Jy sigma=0.001321 ! Fit after self-cal, rms=0.240352Jy sigma=0.001321 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9143 mas, bmaj=2.714 mas, bpa=-8.049 degrees ! Estimated noise=771.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345467 Jy ! Component: 100 - total flux cleaned = 0.000662052 Jy ! Component: 150 - total flux cleaned = 0.000932213 Jy ! Component: 200 - total flux cleaned = 0.00117048 Jy ! Total flux subtracted in 200 components = 0.00117048 Jy ! Clean residual min=-0.007787 max=0.008458 Jy/beam ! Clean residual mean=-0.000126 rms=0.002063 Jy/beam ! Combined flux in latest and established models = 0.175183 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.175183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240316Jy sigma=0.001320 ! Fit after self-cal, rms=0.240308Jy sigma=0.001320 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240308Jy sigma=0.001320 ! Fit after self-cal, rms=0.238471Jy sigma=0.001307 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112149 Jy ! Component: 100 - total flux cleaned = 0.0161564 Jy ! Component: 150 - total flux cleaned = 0.0177009 Jy ! Component: 200 - total flux cleaned = 0.018714 Jy ! Total flux subtracted in 200 components = 0.018714 Jy ! Clean residual min=-0.006192 max=0.005054 Jy/beam ! Clean residual mean=-0.000096 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.193897 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 76 components and 0.193897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238100Jy sigma=0.001304 ! Fit after self-cal, rms=0.237802Jy sigma=0.001302 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9143 x 2.714 at -8.049 degrees (North through East) ! Clean map min=-0.005331 max=0.11414 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237802Jy sigma=0.001302 ! Fit after self-cal, rms=0.239367Jy sigma=0.001301 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239367Jy sigma=0.001301 ! Fit after self-cal, rms=0.239318Jy sigma=0.001301 ! Inverting map and beam ! Estimated beam: bmin=0.9101 mas, bmaj=2.74 mas, bpa=-8.536 degrees ! Estimated noise=767.709 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236482 Jy ! Component: 100 - total flux cleaned = 0.00313902 Jy ! Component: 150 - total flux cleaned = 0.00348565 Jy ! Component: 200 - total flux cleaned = 0.00370902 Jy ! Total flux subtracted in 200 components = 0.00370902 Jy ! Clean residual min=-0.004822 max=0.004506 Jy/beam ! Clean residual mean=-0.000070 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.197606 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 90 components and 0.197606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239216Jy sigma=0.001301 ! Fit after self-cal, rms=0.239165Jy sigma=0.001301 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239165Jy sigma=0.001301 ! Fit after self-cal, rms=0.235329Jy sigma=0.001300 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235329Jy sigma=0.001300 ! Fit after self-cal, rms=0.235276Jy sigma=0.001300 ! Inverting map and beam ! Estimated beam: bmin=0.9079 mas, bmaj=2.748 mas, bpa=-8.4 degrees ! Estimated noise=759.911 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216429 Jy ! Component: 100 - total flux cleaned = -0.000383496 Jy ! Component: 150 - total flux cleaned = -0.000385163 Jy ! Component: 200 - total flux cleaned = -0.000319549 Jy ! Total flux subtracted in 200 components = -0.000319549 Jy ! Clean residual min=-0.004427 max=0.003914 Jy/beam ! Clean residual mean=-0.000095 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.197286 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 0.197286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235205Jy sigma=0.001300 ! Fit after self-cal, rms=0.235190Jy sigma=0.001300 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.415 mas, bmaj=5.823 mas, bpa=2.107 degrees ! Estimated noise=964.118 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122819 Jy ! Component: 100 - total flux cleaned = 0.00131161 Jy ! Component: 150 - total flux cleaned = 0.00130912 Jy ! Component: 200 - total flux cleaned = 0.00130755 Jy ! Total flux subtracted in 200 components = 0.00130755 Jy ! Clean residual min=-0.003599 max=0.003652 Jy/beam ! Clean residual mean=-0.000188 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.198594 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 109 components and 0.198594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235185Jy sigma=0.001300 ! Fit after self-cal, rms=0.235160Jy sigma=0.001299 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.681 mas, bmaj=1.848 mas, bpa=-5.122 degrees ! Estimated noise=1665.51 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.101915 Jy ! Component: 100 - total flux cleaned = 0.13481 Jy ! Component: 150 - total flux cleaned = 0.154889 Jy ! Component: 200 - total flux cleaned = 0.168515 Jy ! Total flux subtracted in 200 components = 0.168515 Jy ! Clean residual min=-0.008790 max=0.010948 Jy/beam ! Clean residual mean=-0.000048 rms=0.002525 Jy/beam ! Combined flux in latest and established models = 0.168515 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.168515 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9079 mas, bmaj=2.748 mas, bpa=-8.4 degrees ! Estimated noise=759.911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136598 Jy ! Component: 100 - total flux cleaned = 0.019884 Jy ! Component: 150 - total flux cleaned = 0.0234204 Jy ! Component: 200 - total flux cleaned = 0.024469 Jy ! Total flux subtracted in 200 components = 0.024469 Jy ! Clean residual min=-0.004400 max=0.004184 Jy/beam ! Clean residual mean=-0.000088 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.192984 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 61 components and 0.192984 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.415 mas, bmaj=5.823 mas, bpa=2.107 degrees ! Estimated noise=964.118 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228872 Jy ! Component: 100 - total flux cleaned = 0.00269509 Jy ! Component: 150 - total flux cleaned = 0.00304576 Jy ! Component: 200 - total flux cleaned = 0.0033602 Jy ! Total flux subtracted in 200 components = 0.0033602 Jy ! Clean residual min=-0.003923 max=0.003891 Jy/beam ! Clean residual mean=-0.000179 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.196344 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 79 components and 0.196344 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9079 mas, bmaj=2.748 mas, bpa=-8.4 degrees ! Estimated noise=759.911 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000362639 Jy ! Component: 100 - total flux cleaned = -0.000101218 Jy ! Component: 150 - total flux cleaned = 0.000186609 Jy ! Component: 200 - total flux cleaned = 0.000341043 Jy ! Total flux subtracted in 200 components = 0.000341043 Jy ! Clean residual min=-0.004153 max=0.003972 Jy/beam ! Clean residual mean=-0.000095 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.196685 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.196685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234910Jy sigma=0.001299 ! Fit after self-cal, rms=0.234879Jy sigma=0.001299 wmodel J1321-2636_X_1997_07_02_yyk\_map.mod ! Writing 96 model components to file: J1321-2636_X_1997_07_02_yyk_map.mod wobs J1321-2636_X_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1321-2636_X_1997_07_02_yyk_uvs.fits wwins J1321-2636_X_1997_07_02_yyk\_map.win ! wwins: Wrote 2 windows to J1321-2636_X_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122231 Jy ! Component: 100 - total flux cleaned = -0.00170669 Jy ! Component: 150 - total flux cleaned = -0.00170775 Jy ! Component: 200 - total flux cleaned = -0.00170782 Jy ! Component: 250 - total flux cleaned = -0.00152582 Jy ! Component: 300 - total flux cleaned = -0.0015261 Jy ! Component: 350 - total flux cleaned = -0.00146871 Jy ! Component: 400 - total flux cleaned = -0.00158143 Jy ! Component: 450 - total flux cleaned = -0.00174467 Jy ! Component: 500 - total flux cleaned = -0.00185014 Jy ! Component: 550 - total flux cleaned = -0.00195423 Jy ! Component: 600 - total flux cleaned = -0.00215719 Jy ! Component: 650 - total flux cleaned = -0.00225775 Jy ! Component: 700 - total flux cleaned = -0.00250288 Jy ! Component: 750 - total flux cleaned = -0.00283781 Jy ! Component: 800 - total flux cleaned = -0.00316609 Jy ! Component: 850 - total flux cleaned = -0.00325813 Jy ! Component: 900 - total flux cleaned = -0.00357563 Jy ! Component: 950 - total flux cleaned = -0.00370928 Jy ! Component: 1000 - total flux cleaned = -0.00379704 Jy ! Component: 1050 - total flux cleaned = -0.00401343 Jy ! Component: 1100 - total flux cleaned = -0.00418389 Jy ! Component: 1150 - total flux cleaned = -0.00447762 Jy ! Component: 1200 - total flux cleaned = -0.00451883 Jy ! Component: 1250 - total flux cleaned = -0.00476276 Jy ! Component: 1300 - total flux cleaned = -0.00492328 Jy ! Component: 1350 - total flux cleaned = -0.00519975 Jy ! Component: 1400 - total flux cleaned = -0.00527813 Jy ! Component: 1450 - total flux cleaned = -0.00554765 Jy ! Component: 1500 - total flux cleaned = -0.00573722 Jy ! Component: 1550 - total flux cleaned = -0.00596228 Jy ! Component: 1600 - total flux cleaned = -0.00614742 Jy ! Component: 1650 - total flux cleaned = -0.00640385 Jy ! Component: 1700 - total flux cleaned = -0.0066935 Jy ! Component: 1750 - total flux cleaned = -0.00694355 Jy ! Component: 1800 - total flux cleaned = -0.00726061 Jy ! Component: 1850 - total flux cleaned = -0.00736467 Jy ! Component: 1900 - total flux cleaned = -0.00753734 Jy ! Component: 1950 - total flux cleaned = -0.00760552 Jy ! Component: 2000 - total flux cleaned = -0.00787509 Jy ! Total flux subtracted in 2048 components = -0.0080416 Jy ! Clean residual min=-0.001722 max=0.001717 Jy/beam ! Clean residual mean=-0.000075 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.188643 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 235 components and 0.188643 Jy ![Exited script file: muppet] wmap "J1321-2636_X_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9079 x 2.748 at -8.4 degrees (North through East) ! Clean map min=-0.0029626 max=0.11402 Jy/beam ! Writing clean map to FITS file: J1321-2636_X_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114019 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000614565 device "J1321-2636_X_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1321-2636_X_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.61701 1.61701 3.23401 6.46803 12.9361 25.8721 51.7442 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9079 x 2.748 at -8.4 degrees (North through East) ! Clean map min=-0.0029626 max=0.11402 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1321-2636_X_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1321-2636_X_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1321-2636_X_1997_07_02_yyk_uvs.log closed on Mon Jan 8 06:03:26 2007