! Started logfile: J1317-1345_X_1997_05_07_yyk_uvs.log on Mon Jan 8 06:01:53 2007 obs J1317-1345_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1317-1345_X_1997_05_07_yyk_uva.fits ! AN table 1: 137 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.683536 visibilities/baseline/integration-bin. ! Found source: J1317-1345 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 16856 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1317-1345_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.295131 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9435 mas, bmaj=2.459 mas, bpa=13.8 degrees ! Estimated noise=1150.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.187255 Jy ! Component: 100 - total flux cleaned = 0.230872 Jy ! Total flux subtracted in 100 components = 0.230872 Jy ! Clean residual min=-0.007104 max=0.012970 Jy/beam ! Clean residual mean=0.000249 rms=0.002388 Jy/beam ! Combined flux in latest and established models = 0.230872 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.230872 Jy ! ! Correcting IF 1. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.186146Jy sigma=0.001240 ! Fit after self-cal, rms=0.186045Jy sigma=0.001239 ! Inverting map and beam ! Estimated beam: bmin=0.9435 mas, bmaj=2.459 mas, bpa=13.8 degrees ! Estimated noise=1150.64 mJy/beam. ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175985 Jy ! Component: 100 - total flux cleaned = 0.0253212 Jy ! Total flux subtracted in 100 components = 0.0253212 Jy ! Clean residual min=-0.006055 max=0.007110 Jy/beam ! Clean residual mean=0.000102 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 0.256194 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.256194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184579Jy sigma=0.001227 ! Fit after self-cal, rms=0.184569Jy sigma=0.001227 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.218 mas, bmaj=3 mas, bpa=8.987 degrees ! Estimated noise=795.422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00793632 Jy ! Component: 100 - total flux cleaned = 0.0109288 Jy ! Component: 150 - total flux cleaned = 0.0122148 Jy ! Component: 200 - total flux cleaned = 0.0123623 Jy ! Total flux subtracted in 200 components = 0.0123623 Jy ! Clean residual min=-0.004873 max=0.005324 Jy/beam ! Clean residual mean=0.000092 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 0.268556 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.268556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184415Jy sigma=0.001225 ! Fit after self-cal, rms=0.184408Jy sigma=0.001225 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.218 x 3 at 8.987 degrees (North through East) ! Clean map min=-0.0048498 max=0.22069 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.989909 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.06 KP 1.01 ! LA 1.02 MK 1.02 NL 1.05 OV 0.99 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00464 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.05 KP 1.01 ! LA 0.98 MK 0.98 NL 1.04 OV 1.08 ! PT 0.90 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.992535 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 1.04 KP 1.02 ! LA 0.99 MK 0.97 NL 1.02 OV 0.99 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.995094 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.03 KP 1.03 ! LA 0.98 MK 0.92 NL 1.02 OV 1.03 ! PT 0.97 SC 1.04 ! ! ! Fit before self-cal, rms=0.184408Jy sigma=0.001225 ! Fit after self-cal, rms=0.184675Jy sigma=0.001223 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184675Jy sigma=0.001223 ! Fit after self-cal, rms=0.184676Jy sigma=0.001223 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.217 mas, bmaj=2.991 mas, bpa=8.254 degrees ! Estimated noise=788.123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00247623 Jy ! Component: 100 - total flux cleaned = -0.00264465 Jy ! Component: 150 - total flux cleaned = -0.00274884 Jy ! Component: 200 - total flux cleaned = -0.00283796 Jy ! Total flux subtracted in 200 components = -0.00283796 Jy ! Clean residual min=-0.004312 max=0.004152 Jy/beam ! Clean residual mean=-0.000031 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.265718 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.265718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184642Jy sigma=0.001222 ! Fit after self-cal, rms=0.184637Jy sigma=0.001222 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184637Jy sigma=0.001222 ! Fit after self-cal, rms=0.181795Jy sigma=0.001205 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000963392 Jy ! Component: 100 - total flux cleaned = 0.00095408 Jy ! Component: 150 - total flux cleaned = 0.000880297 Jy ! Component: 200 - total flux cleaned = 0.000889511 Jy ! Total flux subtracted in 200 components = 0.000889511 Jy ! Clean residual min=-0.004135 max=0.004270 Jy/beam ! Clean residual mean=-0.000035 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.266607 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.266607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181731Jy sigma=0.001205 ! Fit after self-cal, rms=0.181405Jy sigma=0.001203 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.217 x 2.991 at 8.254 degrees (North through East) ! Clean map min=-0.0039982 max=0.22085 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181405Jy sigma=0.001203 ! Fit after self-cal, rms=0.181663Jy sigma=0.001201 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181663Jy sigma=0.001201 ! Fit after self-cal, rms=0.181603Jy sigma=0.001201 ! Inverting map and beam ! Estimated beam: bmin=1.205 mas, bmaj=2.962 mas, bpa=8.969 degrees ! Estimated noise=784.144 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041251 Jy ! Component: 100 - total flux cleaned = 0.000447156 Jy ! Component: 150 - total flux cleaned = 0.00040005 Jy ! Component: 200 - total flux cleaned = 0.00037851 Jy ! Total flux subtracted in 200 components = 0.00037851 Jy ! Clean residual min=-0.003364 max=0.003463 Jy/beam ! Clean residual mean=0.000004 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.266986 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.266986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181591Jy sigma=0.001201 ! Fit after self-cal, rms=0.181573Jy sigma=0.001201 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181573Jy sigma=0.001201 ! Fit after self-cal, rms=0.182007Jy sigma=0.001199 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182007Jy sigma=0.001199 ! Fit after self-cal, rms=0.182001Jy sigma=0.001199 ! Inverting map and beam ! Estimated beam: bmin=1.202 mas, bmaj=2.953 mas, bpa=8.686 degrees ! Estimated noise=784.611 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000670903 Jy ! Component: 100 - total flux cleaned = 0.000696876 Jy ! Component: 150 - total flux cleaned = 0.000680205 Jy ! Component: 200 - total flux cleaned = 0.000665174 Jy ! Total flux subtracted in 200 components = 0.000665174 Jy ! Clean residual min=-0.003469 max=0.003461 Jy/beam ! Clean residual mean=-0.000001 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.267651 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.267651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181992Jy sigma=0.001199 ! Fit after self-cal, rms=0.181990Jy sigma=0.001199 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.445 mas, bmaj=5.002 mas, bpa=11.85 degrees ! Estimated noise=914.027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383935 Jy ! Component: 100 - total flux cleaned = 0.00035514 Jy ! Component: 150 - total flux cleaned = 0.00033362 Jy ! Component: 200 - total flux cleaned = 0.000350879 Jy ! Total flux subtracted in 200 components = 0.000350879 Jy ! Clean residual min=-0.003565 max=0.003304 Jy/beam ! Clean residual mean=-0.000005 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.268002 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.268002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181988Jy sigma=0.001199 ! Fit after self-cal, rms=0.181987Jy sigma=0.001199 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9381 mas, bmaj=2.431 mas, bpa=13.55 degrees ! Estimated noise=1141.92 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.190419 Jy ! Component: 100 - total flux cleaned = 0.234506 Jy ! Component: 150 - total flux cleaned = 0.25109 Jy ! Component: 200 - total flux cleaned = 0.258446 Jy ! Total flux subtracted in 200 components = 0.258446 Jy ! Clean residual min=-0.005013 max=0.004467 Jy/beam ! Clean residual mean=0.000052 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.258446 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.258446 Jy ! Inverting map and beam ! Estimated beam: bmin=1.202 mas, bmaj=2.953 mas, bpa=8.686 degrees ! Estimated noise=784.611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -2.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00662062 Jy ! Component: 100 - total flux cleaned = 0.00981549 Jy ! Component: 150 - total flux cleaned = 0.0112492 Jy ! Component: 200 - total flux cleaned = 0.0115175 Jy ! Total flux subtracted in 200 components = 0.0115175 Jy ! Clean residual min=-0.003281 max=0.003330 Jy/beam ! Clean residual mean=-0.000018 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.269963 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 67 components and 0.269963 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.445 mas, bmaj=5.002 mas, bpa=11.85 degrees ! Estimated noise=914.027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470954 Jy ! Component: 100 - total flux cleaned = 0.000499994 Jy ! Component: 150 - total flux cleaned = 0.000449777 Jy ! Component: 200 - total flux cleaned = 0.000426269 Jy ! Total flux subtracted in 200 components = 0.000426269 Jy ! Clean residual min=-0.003431 max=0.003604 Jy/beam ! Clean residual mean=-0.000036 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.270389 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.270389 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.202 mas, bmaj=2.953 mas, bpa=8.686 degrees ! Estimated noise=784.611 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178853 Jy ! Component: 100 - total flux cleaned = -0.000249366 Jy ! Component: 150 - total flux cleaned = -0.000281665 Jy ! Component: 200 - total flux cleaned = -0.000343347 Jy ! Total flux subtracted in 200 components = -0.000343347 Jy ! Clean residual min=-0.003250 max=0.003304 Jy/beam ! Clean residual mean=-0.000018 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.270046 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 84 components and 0.270046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181932Jy sigma=0.001198 ! Fit after self-cal, rms=0.181933Jy sigma=0.001198 wmodel J1317-1345_X_1997_05_07_yyk\_map.mod ! Writing 84 model components to file: J1317-1345_X_1997_05_07_yyk_map.mod wobs J1317-1345_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1317-1345_X_1997_05_07_yyk_uvs.fits wwins J1317-1345_X_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J1317-1345_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300018 Jy ! Component: 100 - total flux cleaned = -0.000460571 Jy ! Component: 150 - total flux cleaned = -0.00026711 Jy ! Component: 200 - total flux cleaned = -0.000135033 Jy ! Component: 250 - total flux cleaned = -0.000259076 Jy ! Component: 300 - total flux cleaned = -0.000295183 Jy ! Component: 350 - total flux cleaned = -0.000443291 Jy ! Component: 400 - total flux cleaned = -0.000623465 Jy ! Component: 450 - total flux cleaned = -0.000903704 Jy ! Component: 500 - total flux cleaned = -0.00114206 Jy ! Component: 550 - total flux cleaned = -0.00147224 Jy ! Component: 600 - total flux cleaned = -0.0016656 Jy ! Component: 650 - total flux cleaned = -0.0019172 Jy ! Component: 700 - total flux cleaned = -0.00210061 Jy ! Component: 750 - total flux cleaned = -0.0021904 Jy ! Component: 800 - total flux cleaned = -0.00230765 Jy ! Component: 850 - total flux cleaned = -0.00239303 Jy ! Component: 900 - total flux cleaned = -0.00241999 Jy ! Component: 950 - total flux cleaned = -0.00244611 Jy ! Component: 1000 - total flux cleaned = -0.00241823 Jy ! Component: 1050 - total flux cleaned = -0.00247027 Jy ! Component: 1100 - total flux cleaned = -0.0025217 Jy ! Component: 1150 - total flux cleaned = -0.00264885 Jy ! Component: 1200 - total flux cleaned = -0.0027483 Jy ! Component: 1250 - total flux cleaned = -0.00277273 Jy ! Component: 1300 - total flux cleaned = -0.00286971 Jy ! Component: 1350 - total flux cleaned = -0.0029885 Jy ! Component: 1400 - total flux cleaned = -0.00305826 Jy ! Component: 1450 - total flux cleaned = -0.00308116 Jy ! Component: 1500 - total flux cleaned = -0.00319345 Jy ! Component: 1550 - total flux cleaned = -0.00323718 Jy ! Component: 1600 - total flux cleaned = -0.00334631 Jy ! Component: 1650 - total flux cleaned = -0.00338957 Jy ! Component: 1700 - total flux cleaned = -0.00347433 Jy ! Component: 1750 - total flux cleaned = -0.00349531 Jy ! Component: 1800 - total flux cleaned = -0.00357756 Jy ! Component: 1850 - total flux cleaned = -0.00353666 Jy ! Component: 1900 - total flux cleaned = -0.00353686 Jy ! Component: 1950 - total flux cleaned = -0.00357642 Jy ! Component: 2000 - total flux cleaned = -0.00361519 Jy ! Total flux subtracted in 2048 components = -0.00357659 Jy ! Clean residual min=-0.001238 max=0.001014 Jy/beam ! Clean residual mean=-0.000011 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.26647 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 219 components and 0.266469 Jy ![Exited script file: muppet] wmap "J1317-1345_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.202 x 2.953 at 8.686 degrees (North through East) ! Clean map min=-0.0021088 max=0.2197 Jy/beam ! Writing clean map to FITS file: J1317-1345_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.219702 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00037592 device "J1317-1345_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1317-1345_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.513313 0.513313 1.02663 2.05325 4.1065 8.213 16.426 32.852 65.704 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.219 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.202 x 2.953 at 8.686 degrees (North through East) ! Clean map min=-0.0021088 max=0.2197 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1317-1345_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1317-1345_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1317-1345_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 06:02:01 2007