! Started logfile: J1313-2722_S_1997_08_27_yyk_uvs.log on Sun Jan 7 18:16:20 2007 obs J1313-2722_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1313-2722_S_1997_08_27_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.753893 visibilities/baseline/integration-bin. ! Found source: J1313-2722 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 19948 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1313-2722_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.516003 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.62 mas, bmaj=6.481 mas, bpa=-0.5215 degrees ! Estimated noise=3060.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0714559 Jy ! Component: 100 - total flux cleaned = 0.0858114 Jy ! Total flux subtracted in 100 components = 0.0858114 Jy ! Clean residual min=-0.023408 max=0.027606 Jy/beam ! Clean residual mean=0.000025 rms=0.006544 Jy/beam ! Combined flux in latest and established models = 0.0858114 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0858114 Jy ! ! Correcting IF 1. ! A total of 510 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 262 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.508667Jy sigma=0.001605 ! Fit after self-cal, rms=0.506988Jy sigma=0.001599 ! Inverting map and beam ! Estimated beam: bmin=2.62 mas, bmaj=6.481 mas, bpa=-0.5214 degrees ! Estimated noise=3060.39 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=8.378 mas, bpa=-4.364 degrees ! Estimated noise=1614.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191007 Jy ! Component: 100 - total flux cleaned = 0.021 Jy ! Component: 150 - total flux cleaned = 0.0210124 Jy ! Component: 200 - total flux cleaned = 0.0210119 Jy ! Total flux subtracted in 200 components = 0.0210119 Jy ! Clean residual min=-0.009367 max=0.012145 Jy/beam ! Clean residual mean=-0.000087 rms=0.003054 Jy/beam ! Combined flux in latest and established models = 0.106823 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.106823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.506428Jy sigma=0.001597 ! Fit after self-cal, rms=0.506413Jy sigma=0.001597 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 8.378 at -4.364 degrees (North through East) ! Clean map min=-0.0090059 max=0.09526 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.506413Jy sigma=0.001597 ! Fit after self-cal, rms=0.506042Jy sigma=0.001596 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.506042Jy sigma=0.001596 ! Fit after self-cal, rms=0.506040Jy sigma=0.001596 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=8.377 mas, bpa=-4.364 degrees ! Estimated noise=1615.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162696 Jy ! Component: 100 - total flux cleaned = -4.73056e-05 Jy ! Component: 150 - total flux cleaned = -4.925e-05 Jy ! Component: 200 - total flux cleaned = -4.35091e-05 Jy ! Total flux subtracted in 200 components = -4.35091e-05 Jy ! Clean residual min=-0.009225 max=0.012123 Jy/beam ! Clean residual mean=-0.000087 rms=0.003028 Jy/beam ! Combined flux in latest and established models = 0.10678 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.10678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.505982Jy sigma=0.001596 ! Fit after self-cal, rms=0.505974Jy sigma=0.001596 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.505974Jy sigma=0.001596 ! Fit after self-cal, rms=0.504127Jy sigma=0.001589 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00721583 Jy ! Component: 100 - total flux cleaned = 0.00738519 Jy ! Component: 150 - total flux cleaned = 0.00738916 Jy ! Component: 200 - total flux cleaned = 0.00728168 Jy ! Total flux subtracted in 200 components = 0.00728168 Jy ! Clean residual min=-0.008503 max=0.009201 Jy/beam ! Clean residual mean=-0.000086 rms=0.002671 Jy/beam ! Combined flux in latest and established models = 0.114061 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.114061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503927Jy sigma=0.001589 ! Fit after self-cal, rms=0.503460Jy sigma=0.001587 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 8.377 at -4.364 degrees (North through East) ! Clean map min=-0.0080808 max=0.10782 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503460Jy sigma=0.001587 ! Fit after self-cal, rms=0.503460Jy sigma=0.001587 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503460Jy sigma=0.001587 ! Fit after self-cal, rms=0.503235Jy sigma=0.001586 ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=8.377 mas, bpa=-4.364 degrees ! Estimated noise=1615.2 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000935705 Jy ! Component: 100 - total flux cleaned = 0.000541395 Jy ! Component: 150 - total flux cleaned = 0.000333899 Jy ! Component: 200 - total flux cleaned = 0.000161061 Jy ! Total flux subtracted in 200 components = 0.000161061 Jy ! Clean residual min=-0.008137 max=0.008648 Jy/beam ! Clean residual mean=-0.000102 rms=0.002510 Jy/beam ! Combined flux in latest and established models = 0.114222 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.114222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503137Jy sigma=0.001586 ! Fit after self-cal, rms=0.503079Jy sigma=0.001586 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503079Jy sigma=0.001586 ! Fit after self-cal, rms=0.503079Jy sigma=0.001586 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503079Jy sigma=0.001586 ! Fit after self-cal, rms=0.503068Jy sigma=0.001586 ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=8.377 mas, bpa=-4.364 degrees ! Estimated noise=1615.2 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359971 Jy ! Component: 100 - total flux cleaned = -0.000434098 Jy ! Component: 150 - total flux cleaned = -0.000437557 Jy ! Component: 200 - total flux cleaned = -0.0004984 Jy ! Total flux subtracted in 200 components = -0.0004984 Jy ! Clean residual min=-0.009016 max=0.008502 Jy/beam ! Clean residual mean=-0.000060 rms=0.002432 Jy/beam ! Combined flux in latest and established models = 0.113724 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.113724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503031Jy sigma=0.001586 ! Fit after self-cal, rms=0.503022Jy sigma=0.001586 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.029 mas, bmaj=20.46 mas, bpa=4.091 degrees ! Estimated noise=2027.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147476 Jy ! Component: 100 - total flux cleaned = 0.00162171 Jy ! Component: 150 - total flux cleaned = 0.00168922 Jy ! Component: 200 - total flux cleaned = 0.00174313 Jy ! Total flux subtracted in 200 components = 0.00174313 Jy ! Clean residual min=-0.007885 max=0.007765 Jy/beam ! Clean residual mean=-0.000124 rms=0.002815 Jy/beam ! Combined flux in latest and established models = 0.115467 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 55 components and 0.115467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503053Jy sigma=0.001586 ! Fit after self-cal, rms=0.503030Jy sigma=0.001586 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.62 mas, bmaj=6.481 mas, bpa=-0.5214 degrees ! Estimated noise=3060.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0936864 Jy ! Component: 100 - total flux cleaned = 0.108826 Jy ! Component: 150 - total flux cleaned = 0.110968 Jy ! Component: 200 - total flux cleaned = 0.111484 Jy ! Total flux subtracted in 200 components = 0.111484 Jy ! Clean residual min=-0.019982 max=0.020284 Jy/beam ! Clean residual mean=0.000013 rms=0.005713 Jy/beam ! Combined flux in latest and established models = 0.111484 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.111484 Jy ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=8.377 mas, bpa=-4.364 degrees ! Estimated noise=1615.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203413 Jy ! Component: 100 - total flux cleaned = 0.0020702 Jy ! Component: 150 - total flux cleaned = 0.00207109 Jy ! Component: 200 - total flux cleaned = 0.00206816 Jy ! Total flux subtracted in 200 components = 0.00206816 Jy ! Clean residual min=-0.008324 max=0.008624 Jy/beam ! Clean residual mean=-0.000081 rms=0.002436 Jy/beam ! Combined flux in latest and established models = 0.113552 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.113552 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.029 mas, bmaj=20.46 mas, bpa=4.091 degrees ! Estimated noise=2027.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147526 Jy ! Component: 100 - total flux cleaned = 0.00155435 Jy ! Component: 150 - total flux cleaned = 0.00170113 Jy ! Component: 200 - total flux cleaned = 0.0017659 Jy ! Total flux subtracted in 200 components = 0.0017659 Jy ! Clean residual min=-0.007216 max=0.007705 Jy/beam ! Clean residual mean=-0.000150 rms=0.002785 Jy/beam ! Combined flux in latest and established models = 0.115318 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 34 components and 0.115318 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=8.377 mas, bpa=-4.364 degrees ! Estimated noise=1615.2 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128523 Jy ! Component: 100 - total flux cleaned = -0.00136148 Jy ! Component: 150 - total flux cleaned = -0.0013596 Jy ! Component: 200 - total flux cleaned = -0.00141289 Jy ! Total flux subtracted in 200 components = -0.00141289 Jy ! Clean residual min=-0.008378 max=0.008482 Jy/beam ! Clean residual mean=-0.000081 rms=0.002403 Jy/beam ! Combined flux in latest and established models = 0.113905 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.113905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.502961Jy sigma=0.001586 ! Fit after self-cal, rms=0.502900Jy sigma=0.001586 wmodel J1313-2722_S_1997_08_27_yyk\_map.mod ! Writing 38 model components to file: J1313-2722_S_1997_08_27_yyk_map.mod wobs J1313-2722_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1313-2722_S_1997_08_27_yyk_uvs.fits wwins J1313-2722_S_1997_08_27_yyk\_map.win ! wwins: Wrote 1 windows to J1313-2722_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443421 Jy ! Component: 100 - total flux cleaned = -0.000104205 Jy ! Component: 150 - total flux cleaned = -0.000892998 Jy ! Component: 200 - total flux cleaned = -0.00127125 Jy ! Component: 250 - total flux cleaned = -0.00115239 Jy ! Component: 300 - total flux cleaned = -0.00138774 Jy ! Component: 350 - total flux cleaned = -0.00161129 Jy ! Component: 400 - total flux cleaned = -0.00116753 Jy ! Component: 450 - total flux cleaned = -0.00138381 Jy ! Component: 500 - total flux cleaned = -0.00148739 Jy ! Component: 550 - total flux cleaned = -0.0015905 Jy ! Component: 600 - total flux cleaned = -0.00189472 Jy ! Component: 650 - total flux cleaned = -0.0022915 Jy ! Component: 700 - total flux cleaned = -0.00277633 Jy ! Component: 750 - total flux cleaned = -0.00296655 Jy ! Component: 800 - total flux cleaned = -0.003434 Jy ! Component: 850 - total flux cleaned = -0.00370796 Jy ! Component: 900 - total flux cleaned = -0.00406803 Jy ! Component: 950 - total flux cleaned = -0.0044221 Jy ! Component: 1000 - total flux cleaned = -0.00450909 Jy ! Component: 1050 - total flux cleaned = -0.00502683 Jy ! Component: 1100 - total flux cleaned = -0.00545016 Jy ! Component: 1150 - total flux cleaned = -0.00578471 Jy ! Component: 1200 - total flux cleaned = -0.00611508 Jy ! Component: 1250 - total flux cleaned = -0.0065229 Jy ! Component: 1300 - total flux cleaned = -0.00668384 Jy ! Component: 1350 - total flux cleaned = -0.00700114 Jy ! Component: 1400 - total flux cleaned = -0.0072354 Jy ! Component: 1450 - total flux cleaned = -0.00754449 Jy ! Component: 1500 - total flux cleaned = -0.00792652 Jy ! Component: 1550 - total flux cleaned = -0.00815273 Jy ! Component: 1600 - total flux cleaned = -0.00860029 Jy ! Component: 1650 - total flux cleaned = -0.00889533 Jy ! Component: 1700 - total flux cleaned = -0.00933269 Jy ! Component: 1750 - total flux cleaned = -0.00947737 Jy ! Component: 1800 - total flux cleaned = -0.00983344 Jy ! Component: 1850 - total flux cleaned = -0.00990386 Jy ! Component: 1900 - total flux cleaned = -0.0101833 Jy ! Component: 1950 - total flux cleaned = -0.0102532 Jy ! Component: 2000 - total flux cleaned = -0.0106645 Jy ! Total flux subtracted in 2048 components = -0.0108005 Jy ! Clean residual min=-0.004339 max=0.004496 Jy/beam ! Clean residual mean=-0.000061 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.103104 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 172 components and 0.103104 Jy ![Exited script file: muppet] wmap "J1313-2722_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 8.377 at -4.364 degrees (North through East) ! Clean map min=-0.0073584 max=0.11293 Jy/beam ! Writing clean map to FITS file: J1313-2722_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112932 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00132948 device "J1313-2722_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1313-2722_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.53171 3.53171 7.06342 14.1268 28.2537 56.5074 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 8.377 at -4.364 degrees (North through East) ! Clean map min=-0.0073584 max=0.11293 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1313-2722_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1313-2722_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1313-2722_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 18:16:27 2007