! Started logfile: J1312-0424_X_1997_05_07_yyk_uvs.log on Mon Jan 8 06:00:18 2007 obs J1312-0424_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1312-0424_X_1997_05_07_yyk_uva.fits ! AN table 1: 139 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.721982 visibilities/baseline/integration-bin. ! Found source: J1312-0424 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 18064 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1312-0424_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.289298 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.01 mas, bmaj=2.155 mas, bpa=2.961 degrees ! Estimated noise=1110.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.184088 Jy ! Component: 100 - total flux cleaned = 0.210975 Jy ! Total flux subtracted in 100 components = 0.210975 Jy ! Clean residual min=-0.010860 max=0.018290 Jy/beam ! Clean residual mean=0.000039 rms=0.003487 Jy/beam ! Combined flux in latest and established models = 0.210975 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.210975 Jy ! ! Correcting IF 1. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.184825Jy sigma=0.001220 ! Fit after self-cal, rms=0.183436Jy sigma=0.001217 ! Inverting map and beam ! Estimated beam: bmin=1.01 mas, bmaj=2.155 mas, bpa=2.961 degrees ! Estimated noise=1110.62 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.232 mas, bmaj=2.624 mas, bpa=3.911 degrees ! Estimated noise=750.679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206919 Jy ! Component: 100 - total flux cleaned = 0.0261352 Jy ! Component: 150 - total flux cleaned = 0.0283489 Jy ! Component: 200 - total flux cleaned = 0.0290429 Jy ! Total flux subtracted in 200 components = 0.0290429 Jy ! Clean residual min=-0.004202 max=0.004884 Jy/beam ! Clean residual mean=0.000017 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.240018 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.240018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182530Jy sigma=0.001205 ! Fit after self-cal, rms=0.182528Jy sigma=0.001205 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.232 x 2.624 at 3.911 degrees (North through East) ! Clean map min=-0.0039622 max=0.22689 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.997783 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.05 KP 1.02 ! LA 1.02 MK 1.00 NL 1.05 OV 1.00 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00242 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.03 KP 1.00 ! LA 1.01 MK 0.97 NL 1.03 OV 1.04 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.991895 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.06 KP 1.01 ! LA 1.01 MK 1.02 NL 0.99 OV 0.98 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.983823 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.10 KP 0.96 ! LA 1.02 MK 0.98 NL 1.03 OV 0.99 ! PT 1.00 SC 1.06 ! ! ! Fit before self-cal, rms=0.182528Jy sigma=0.001205 ! Fit after self-cal, rms=0.183209Jy sigma=0.001204 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183209Jy sigma=0.001204 ! Fit after self-cal, rms=0.183211Jy sigma=0.001204 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.24 mas, bmaj=2.642 mas, bpa=3.659 degrees ! Estimated noise=742.719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00331313 Jy ! Component: 100 - total flux cleaned = -0.00442802 Jy ! Component: 150 - total flux cleaned = -0.00457551 Jy ! Component: 200 - total flux cleaned = -0.00463668 Jy ! Total flux subtracted in 200 components = -0.00463668 Jy ! Clean residual min=-0.003285 max=0.003553 Jy/beam ! Clean residual mean=0.000007 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.235381 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.235381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183120Jy sigma=0.001203 ! Fit after self-cal, rms=0.183118Jy sigma=0.001203 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183118Jy sigma=0.001203 ! Fit after self-cal, rms=0.182379Jy sigma=0.001197 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391291 Jy ! Component: 100 - total flux cleaned = 0.000419596 Jy ! Component: 150 - total flux cleaned = 0.000466354 Jy ! Component: 200 - total flux cleaned = 0.000444547 Jy ! Total flux subtracted in 200 components = 0.000444547 Jy ! Clean residual min=-0.003341 max=0.003463 Jy/beam ! Clean residual mean=0.000007 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.235826 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.235826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182380Jy sigma=0.001197 ! Fit after self-cal, rms=0.182266Jy sigma=0.001196 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.24 x 2.642 at 3.659 degrees (North through East) ! Clean map min=-0.0031778 max=0.22687 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182266Jy sigma=0.001196 ! Fit after self-cal, rms=0.391681Jy sigma=0.001192 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391681Jy sigma=0.001192 ! Fit after self-cal, rms=0.391706Jy sigma=0.001192 ! Inverting map and beam ! Estimated beam: bmin=1.24 mas, bmaj=2.645 mas, bpa=3.807 degrees ! Estimated noise=740.2 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543248 Jy ! Component: 100 - total flux cleaned = 0.000578942 Jy ! Component: 150 - total flux cleaned = 0.000609655 Jy ! Component: 200 - total flux cleaned = 0.000623212 Jy ! Total flux subtracted in 200 components = 0.000623212 Jy ! Clean residual min=-0.002743 max=0.002966 Jy/beam ! Clean residual mean=0.000011 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.236449 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.236449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391704Jy sigma=0.001192 ! Fit after self-cal, rms=0.391714Jy sigma=0.001192 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391714Jy sigma=0.001192 ! Fit after self-cal, rms=0.401567Jy sigma=0.001190 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.401567Jy sigma=0.001190 ! Fit after self-cal, rms=0.401546Jy sigma=0.001190 ! Inverting map and beam ! Estimated beam: bmin=1.238 mas, bmaj=2.641 mas, bpa=3.807 degrees ! Estimated noise=741.189 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000773063 Jy ! Component: 100 - total flux cleaned = 0.000902027 Jy ! Component: 150 - total flux cleaned = 0.000936585 Jy ! Component: 200 - total flux cleaned = 0.000967998 Jy ! Total flux subtracted in 200 components = 0.000967998 Jy ! Clean residual min=-0.002659 max=0.002949 Jy/beam ! Clean residual mean=0.000012 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.237417 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.237417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.401544Jy sigma=0.001190 ! Fit after self-cal, rms=0.401553Jy sigma=0.001190 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.491 mas, bmaj=4.253 mas, bpa=10.35 degrees ! Estimated noise=860.665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.00189e-05 Jy ! Component: 100 - total flux cleaned = -1.34297e-05 Jy ! Component: 150 - total flux cleaned = -1.34732e-05 Jy ! Component: 200 - total flux cleaned = -1.83655e-06 Jy ! Total flux subtracted in 200 components = -1.83655e-06 Jy ! Clean residual min=-0.002870 max=0.003223 Jy/beam ! Clean residual mean=0.000017 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.237415 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.237415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.401554Jy sigma=0.001190 ! Fit after self-cal, rms=0.401551Jy sigma=0.001190 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.012 mas, bmaj=2.157 mas, bpa=3.977 degrees ! Estimated noise=1150.26 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.19434 Jy ! Component: 100 - total flux cleaned = 0.221908 Jy ! Component: 150 - total flux cleaned = 0.230575 Jy ! Component: 200 - total flux cleaned = 0.234444 Jy ! Total flux subtracted in 200 components = 0.234444 Jy ! Clean residual min=-0.005131 max=0.004903 Jy/beam ! Clean residual mean=0.000023 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.234444 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.234444 Jy ! Inverting map and beam ! Estimated beam: bmin=1.238 mas, bmaj=2.641 mas, bpa=3.807 degrees ! Estimated noise=741.189 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263024 Jy ! Component: 100 - total flux cleaned = 0.00283493 Jy ! Component: 150 - total flux cleaned = 0.00294301 Jy ! Component: 200 - total flux cleaned = 0.00302789 Jy ! Total flux subtracted in 200 components = 0.00302789 Jy ! Clean residual min=-0.002662 max=0.002849 Jy/beam ! Clean residual mean=0.000011 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.237472 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 30 components and 0.237472 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.491 mas, bmaj=4.253 mas, bpa=10.35 degrees ! Estimated noise=860.665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154336 Jy ! Component: 100 - total flux cleaned = 8.98941e-05 Jy ! Component: 150 - total flux cleaned = 0.000109375 Jy ! Component: 200 - total flux cleaned = 0.000126878 Jy ! Total flux subtracted in 200 components = 0.000126878 Jy ! Clean residual min=-0.002864 max=0.003146 Jy/beam ! Clean residual mean=0.000016 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.237599 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 32 components and 0.237599 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.238 mas, bmaj=2.641 mas, bpa=3.807 degrees ! Estimated noise=741.189 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.57889e-06 Jy ! Component: 100 - total flux cleaned = 4.52127e-06 Jy ! Component: 150 - total flux cleaned = 4.53435e-06 Jy ! Component: 200 - total flux cleaned = 4.38617e-06 Jy ! Total flux subtracted in 200 components = 4.38617e-06 Jy ! Clean residual min=-0.002652 max=0.002886 Jy/beam ! Clean residual mean=0.000011 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.237603 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.237603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.401554Jy sigma=0.001190 ! Fit after self-cal, rms=0.401547Jy sigma=0.001190 wmodel J1312-0424_X_1997_05_07_yyk\_map.mod ! Writing 40 model components to file: J1312-0424_X_1997_05_07_yyk_map.mod wobs J1312-0424_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1312-0424_X_1997_05_07_yyk_uvs.fits wwins J1312-0424_X_1997_05_07_yyk\_map.win ! wwins: Wrote 1 windows to J1312-0424_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000533845 Jy ! Component: 100 - total flux cleaned = 0.000814586 Jy ! Component: 150 - total flux cleaned = 0.000948737 Jy ! Component: 200 - total flux cleaned = 0.000990685 Jy ! Component: 250 - total flux cleaned = 0.001029 Jy ! Component: 300 - total flux cleaned = 0.00114566 Jy ! Component: 350 - total flux cleaned = 0.0014476 Jy ! Component: 400 - total flux cleaned = 0.00170203 Jy ! Component: 450 - total flux cleaned = 0.00180724 Jy ! Component: 500 - total flux cleaned = 0.00197877 Jy ! Component: 550 - total flux cleaned = 0.00211263 Jy ! Component: 600 - total flux cleaned = 0.00221074 Jy ! Component: 650 - total flux cleaned = 0.00236945 Jy ! Component: 700 - total flux cleaned = 0.00246255 Jy ! Component: 750 - total flux cleaned = 0.00258398 Jy ! Component: 800 - total flux cleaned = 0.00273244 Jy ! Component: 850 - total flux cleaned = 0.00281959 Jy ! Component: 900 - total flux cleaned = 0.00279059 Jy ! Component: 950 - total flux cleaned = 0.00281837 Jy ! Component: 1000 - total flux cleaned = 0.00281799 Jy ! Component: 1050 - total flux cleaned = 0.0028183 Jy ! Component: 1100 - total flux cleaned = 0.00281775 Jy ! Component: 1150 - total flux cleaned = 0.00289615 Jy ! Component: 1200 - total flux cleaned = 0.00297339 Jy ! Component: 1250 - total flux cleaned = 0.00302424 Jy ! Component: 1300 - total flux cleaned = 0.00309945 Jy ! Component: 1350 - total flux cleaned = 0.0031979 Jy ! Component: 1400 - total flux cleaned = 0.00324627 Jy ! Component: 1450 - total flux cleaned = 0.00324611 Jy ! Component: 1500 - total flux cleaned = 0.0032697 Jy ! Component: 1550 - total flux cleaned = 0.00326957 Jy ! Component: 1600 - total flux cleaned = 0.00326934 Jy ! Component: 1650 - total flux cleaned = 0.00322396 Jy ! Component: 1700 - total flux cleaned = 0.00324656 Jy ! Component: 1750 - total flux cleaned = 0.00324652 Jy ! Component: 1800 - total flux cleaned = 0.00326858 Jy ! Component: 1850 - total flux cleaned = 0.00326874 Jy ! Component: 1900 - total flux cleaned = 0.0033113 Jy ! Component: 1950 - total flux cleaned = 0.00326889 Jy ! Component: 2000 - total flux cleaned = 0.00337336 Jy ! Total flux subtracted in 2048 components = 0.00339377 Jy ! Clean residual min=-0.001268 max=0.001256 Jy/beam ! Clean residual mean=0.000006 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.240997 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 167 components and 0.240997 Jy ![Exited script file: muppet] wmap "J1312-0424_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.238 x 2.641 at 3.807 degrees (North through East) ! Clean map min=-0.0019045 max=0.22602 Jy/beam ! Writing clean map to FITS file: J1312-0424_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.22602 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000401056 device "J1312-0424_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1312-0424_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.532328 0.532328 1.06466 2.12931 4.25862 8.51724 17.0345 34.069 68.138 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.226 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.238 x 2.641 at 3.807 degrees (North through East) ! Clean map min=-0.0019045 max=0.22602 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1312-0424_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1312-0424_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1312-0424_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 06:00:26 2007