! Started logfile: J1259-2436_X_1997_08_27_yyk_uvs.log on Mon Jan 8 05:54:02 2007 obs J1259-2436_X_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J1259-2436_X_1997_08_27_yyk_uva.fits ! AN table 1: 148 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.849399 visibilities/baseline/integration-bin. ! Found source: J1259-2436 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 701 lines of history. ! ! Reading 22628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1259-2436_X_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.329266 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6908 mas, bmaj=1.697 mas, bpa=-3.235 degrees ! Estimated noise=1385.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.193207 Jy ! Component: 100 - total flux cleaned = 0.2224 Jy ! Total flux subtracted in 100 components = 0.2224 Jy ! Clean residual min=-0.008082 max=0.018484 Jy/beam ! Clean residual mean=0.000131 rms=0.002687 Jy/beam ! Combined flux in latest and established models = 0.2224 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.2224 Jy ! ! Correcting IF 1. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.235077Jy sigma=0.001288 ! Fit after self-cal, rms=0.235012Jy sigma=0.001288 ! Inverting map and beam ! Estimated beam: bmin=0.6908 mas, bmaj=1.697 mas, bpa=-3.235 degrees ! Estimated noise=1385.52 mJy/beam. ! Added new window around map position (2.4, 1.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219282 Jy ! Component: 100 - total flux cleaned = 0.0341571 Jy ! Total flux subtracted in 100 components = 0.0341571 Jy ! Clean residual min=-0.007531 max=0.008046 Jy/beam ! Clean residual mean=0.000095 rms=0.002034 Jy/beam ! Combined flux in latest and established models = 0.256557 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.256557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232973Jy sigma=0.001274 ! Fit after self-cal, rms=0.232880Jy sigma=0.001274 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9242 mas, bmaj=2.352 mas, bpa=-2.029 degrees ! Estimated noise=825.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150823 Jy ! Component: 100 - total flux cleaned = 0.0229217 Jy ! Component: 150 - total flux cleaned = 0.0272931 Jy ! Component: 200 - total flux cleaned = 0.0290598 Jy ! Total flux subtracted in 200 components = 0.0290598 Jy ! Clean residual min=-0.006452 max=0.010478 Jy/beam ! Clean residual mean=0.000105 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.285616 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.285617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232313Jy sigma=0.001270 ! Fit after self-cal, rms=0.232261Jy sigma=0.001269 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9242 x 2.352 at -2.029 degrees (North through East) ! Clean map min=-0.0058315 max=0.22901 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00114 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.99 KP 1.09 ! LA 0.98 MK 1.02 NL 1.02 OV 1.00 ! PT 0.93 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01199 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.98 KP 1.11 ! LA 0.96 MK 0.96 NL 0.97 OV 1.07 ! PT 0.90 SC 0.95 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.998729 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.98 KP 1.08 ! LA 0.97 MK 1.02 NL 1.00 OV 1.01 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.986191 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.95 KP 1.11 ! LA 0.97 MK 1.00 NL 1.01 OV 1.05 ! PT 0.95 SC 1.07 ! ! ! Fit before self-cal, rms=0.232261Jy sigma=0.001269 ! Fit after self-cal, rms=0.234118Jy sigma=0.001266 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234118Jy sigma=0.001266 ! Fit after self-cal, rms=0.234120Jy sigma=0.001266 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9244 mas, bmaj=2.358 mas, bpa=-2.091 degrees ! Estimated noise=821.726 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.4, -1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00924646 Jy ! Component: 100 - total flux cleaned = 0.0123667 Jy ! Component: 150 - total flux cleaned = 0.0136251 Jy ! Component: 200 - total flux cleaned = 0.0141683 Jy ! Total flux subtracted in 200 components = 0.0141683 Jy ! Clean residual min=-0.003754 max=0.003959 Jy/beam ! Clean residual mean=-0.000040 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.299785 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 64 components and 0.299785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233841Jy sigma=0.001265 ! Fit after self-cal, rms=0.233824Jy sigma=0.001265 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233824Jy sigma=0.001265 ! Fit after self-cal, rms=0.225150Jy sigma=0.001219 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00694777 Jy ! Component: 100 - total flux cleaned = 0.00917418 Jy ! Component: 150 - total flux cleaned = 0.0101909 Jy ! Component: 200 - total flux cleaned = 0.0108007 Jy ! Total flux subtracted in 200 components = 0.0108007 Jy ! Clean residual min=-0.004175 max=0.004168 Jy/beam ! Clean residual mean=-0.000060 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.310586 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 77 components and 0.310585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224949Jy sigma=0.001218 ! Fit after self-cal, rms=0.223490Jy sigma=0.001211 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9244 x 2.358 at -2.091 degrees (North through East) ! Clean map min=-0.0041465 max=0.23574 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223490Jy sigma=0.001211 ! Fit after self-cal, rms=0.219766Jy sigma=0.001209 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219766Jy sigma=0.001209 ! Fit after self-cal, rms=0.219388Jy sigma=0.001207 ! Inverting map and beam ! Estimated beam: bmin=0.9251 mas, bmaj=2.377 mas, bpa=-2.02 degrees ! Estimated noise=814.143 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151345 Jy ! Component: 100 - total flux cleaned = 0.00177333 Jy ! Component: 150 - total flux cleaned = 0.00211223 Jy ! Component: 200 - total flux cleaned = 0.00221256 Jy ! Total flux subtracted in 200 components = 0.00221256 Jy ! Clean residual min=-0.003537 max=0.003714 Jy/beam ! Clean residual mean=0.000027 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.312798 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 0.312798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219359Jy sigma=0.001207 ! Fit after self-cal, rms=0.219222Jy sigma=0.001206 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219222Jy sigma=0.001206 ! Fit after self-cal, rms=0.219357Jy sigma=0.001205 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219357Jy sigma=0.001205 ! Fit after self-cal, rms=0.219307Jy sigma=0.001205 ! Inverting map and beam ! Estimated beam: bmin=0.9264 mas, bmaj=2.377 mas, bpa=-1.979 degrees ! Estimated noise=814.319 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000925213 Jy ! Component: 100 - total flux cleaned = 0.00101727 Jy ! Component: 150 - total flux cleaned = 0.00114365 Jy ! Component: 200 - total flux cleaned = 0.0012206 Jy ! Total flux subtracted in 200 components = 0.0012206 Jy ! Clean residual min=-0.003453 max=0.003651 Jy/beam ! Clean residual mean=0.000028 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.314019 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.314019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219294Jy sigma=0.001205 ! Fit after self-cal, rms=0.219267Jy sigma=0.001205 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.353 mas, bmaj=5.373 mas, bpa=4.348 degrees ! Estimated noise=1032.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472451 Jy ! Component: 100 - total flux cleaned = 0.000565713 Jy ! Component: 150 - total flux cleaned = 0.000644055 Jy ! Component: 200 - total flux cleaned = 0.000680447 Jy ! Total flux subtracted in 200 components = 0.000680447 Jy ! Clean residual min=-0.003775 max=0.004498 Jy/beam ! Clean residual mean=0.000051 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.314699 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 100 components and 0.314699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219266Jy sigma=0.001205 ! Fit after self-cal, rms=0.219246Jy sigma=0.001204 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6932 mas, bmaj=1.706 mas, bpa=-3.334 degrees ! Estimated noise=1374.92 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.199131 Jy ! Component: 100 - total flux cleaned = 0.232518 Jy ! Component: 150 - total flux cleaned = 0.25091 Jy ! Component: 200 - total flux cleaned = 0.263862 Jy ! Total flux subtracted in 200 components = 0.263862 Jy ! Clean residual min=-0.005654 max=0.007387 Jy/beam ! Clean residual mean=0.000080 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.263862 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.263862 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9264 mas, bmaj=2.377 mas, bpa=-1.979 degrees ! Estimated noise=814.319 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173967 Jy ! Component: 100 - total flux cleaned = 0.0278392 Jy ! Component: 150 - total flux cleaned = 0.0348697 Jy ! Component: 200 - total flux cleaned = 0.0398527 Jy ! Total flux subtracted in 200 components = 0.0398527 Jy ! Clean residual min=-0.004033 max=0.003073 Jy/beam ! Clean residual mean=0.000054 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.303714 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 79 components and 0.303714 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.353 mas, bmaj=5.373 mas, bpa=4.348 degrees ! Estimated noise=1032.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00537867 Jy ! Component: 100 - total flux cleaned = 0.00843286 Jy ! Component: 150 - total flux cleaned = 0.0102481 Jy ! Component: 200 - total flux cleaned = 0.010781 Jy ! Total flux subtracted in 200 components = 0.010781 Jy ! Clean residual min=-0.003752 max=0.004218 Jy/beam ! Clean residual mean=0.000052 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.314495 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 120 components and 0.314495 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9264 mas, bmaj=2.377 mas, bpa=-1.979 degrees ! Estimated noise=814.319 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00042025 Jy ! Component: 100 - total flux cleaned = 0.000805195 Jy ! Component: 150 - total flux cleaned = 0.00106839 Jy ! Component: 200 - total flux cleaned = 0.00111573 Jy ! Total flux subtracted in 200 components = 0.00111573 Jy ! Clean residual min=-0.003384 max=0.003422 Jy/beam ! Clean residual mean=0.000024 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.315611 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 137 components and 0.315611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219241Jy sigma=0.001204 ! Fit after self-cal, rms=0.219224Jy sigma=0.001204 wmodel J1259-2436_X_1997_08_27_yyk\_map.mod ! Writing 137 model components to file: J1259-2436_X_1997_08_27_yyk_map.mod wobs J1259-2436_X_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J1259-2436_X_1997_08_27_yyk_uvs.fits wwins J1259-2436_X_1997_08_27_yyk\_map.win ! wwins: Wrote 4 windows to J1259-2436_X_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123641 Jy ! Component: 100 - total flux cleaned = 0.000510301 Jy ! Component: 150 - total flux cleaned = 0.000960395 Jy ! Component: 200 - total flux cleaned = 0.00124191 Jy ! Component: 250 - total flux cleaned = 0.00164589 Jy ! Component: 300 - total flux cleaned = 0.00203228 Jy ! Component: 350 - total flux cleaned = 0.00244823 Jy ! Component: 400 - total flux cleaned = 0.00268977 Jy ! Component: 450 - total flux cleaned = 0.00304132 Jy ! Component: 500 - total flux cleaned = 0.00315521 Jy ! Component: 550 - total flux cleaned = 0.00330364 Jy ! Component: 600 - total flux cleaned = 0.0034487 Jy ! Component: 650 - total flux cleaned = 0.00348453 Jy ! Component: 700 - total flux cleaned = 0.00355433 Jy ! Component: 750 - total flux cleaned = 0.00365606 Jy ! Component: 800 - total flux cleaned = 0.00365609 Jy ! Component: 850 - total flux cleaned = 0.00375355 Jy ! Component: 900 - total flux cleaned = 0.00378529 Jy ! Component: 950 - total flux cleaned = 0.00384829 Jy ! Component: 1000 - total flux cleaned = 0.00397103 Jy ! Component: 1050 - total flux cleaned = 0.00397075 Jy ! Component: 1100 - total flux cleaned = 0.0039115 Jy ! Component: 1150 - total flux cleaned = 0.00382486 Jy ! Component: 1200 - total flux cleaned = 0.00379714 Jy ! Component: 1250 - total flux cleaned = 0.00376961 Jy ! Component: 1300 - total flux cleaned = 0.00360368 Jy ! Component: 1350 - total flux cleaned = 0.00352248 Jy ! Component: 1400 - total flux cleaned = 0.00349532 Jy ! Component: 1450 - total flux cleaned = 0.00338957 Jy ! Component: 1500 - total flux cleaned = 0.00328512 Jy ! Component: 1550 - total flux cleaned = 0.00328535 Jy ! Component: 1600 - total flux cleaned = 0.00325991 Jy ! Component: 1650 - total flux cleaned = 0.00318471 Jy ! Component: 1700 - total flux cleaned = 0.00316009 Jy ! Component: 1750 - total flux cleaned = 0.00308696 Jy ! Component: 1800 - total flux cleaned = 0.00303855 Jy ! Component: 1850 - total flux cleaned = 0.00296735 Jy ! Component: 1900 - total flux cleaned = 0.00284991 Jy ! Component: 1950 - total flux cleaned = 0.00280377 Jy ! Component: 2000 - total flux cleaned = 0.00275739 Jy ! Total flux subtracted in 2048 components = 0.00273437 Jy ! Clean residual min=-0.001276 max=0.001372 Jy/beam ! Clean residual mean=0.000012 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.318346 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 281 components and 0.318346 Jy ![Exited script file: muppet] wmap "J1259-2436_X_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9264 x 2.377 at -1.979 degrees (North through East) ! Clean map min=-0.0026336 max=0.23501 Jy/beam ! Writing clean map to FITS file: J1259-2436_X_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.235015 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000455805 device "J1259-2436_X_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1259-2436_X_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.581842 0.581842 1.16368 2.32737 4.65474 9.30947 18.6189 37.2379 74.4758 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.235 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9264 x 2.377 at -1.979 degrees (North through East) ! Clean map min=-0.0026336 max=0.23501 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1259-2436_X_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1259-2436_X_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1259-2436_X_1997_08_27_yyk_uvs.log closed on Mon Jan 8 05:54:12 2007