! Started logfile: J1258-2219_S_1997_07_02_yyk_uvs.log on Sun Jan 7 18:10:52 2007 obs J1258-2219_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J1258-2219_S_1997_07_02_yyk_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.850505 visibilities/baseline/integration-bin. ! Found source: J1258-2219 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 21892 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1258-2219_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.898549 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.662 mas, bmaj=7.063 mas, bpa=-4.834 degrees ! Estimated noise=2376.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.654932 Jy ! Component: 100 - total flux cleaned = 0.793363 Jy ! Total flux subtracted in 100 components = 0.793363 Jy ! Clean residual min=-0.030817 max=0.052233 Jy/beam ! Clean residual mean=0.000443 rms=0.009947 Jy/beam ! Combined flux in latest and established models = 0.793363 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.793363 Jy ! ! Correcting IF 1. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.436569Jy sigma=0.001348 ! Fit after self-cal, rms=0.435932Jy sigma=0.001347 ! Inverting map and beam ! Estimated beam: bmin=2.662 mas, bmaj=7.063 mas, bpa=-4.834 degrees ! Estimated noise=2376.38 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=10.05 mas, bpa=-6.332 degrees ! Estimated noise=1226.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0612455 Jy ! Component: 100 - total flux cleaned = 0.080714 Jy ! Component: 150 - total flux cleaned = 0.0815019 Jy ! Component: 200 - total flux cleaned = 0.081821 Jy ! Total flux subtracted in 200 components = 0.081821 Jy ! Clean residual min=-0.023204 max=0.033694 Jy/beam ! Clean residual mean=0.001343 rms=0.008425 Jy/beam ! Combined flux in latest and established models = 0.875184 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.875185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428944Jy sigma=0.001319 ! Fit after self-cal, rms=0.428848Jy sigma=0.001319 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.583 x 10.05 at -6.332 degrees (North through East) ! Clean map min=-0.022446 max=0.7811 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02536 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.12 HN 0.92 KP 0.91 ! LA 0.98 MK 1.00 NL 1.00* OV 1.12 ! PT 0.94 SC 0.80 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.985596 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.17 HN 1.04 KP 0.93 ! LA 1.09 MK 1.05 NL 0.98 OV 1.06 ! PT 0.93 SC 0.86 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.04142 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.09 HN 0.95 KP 0.93 ! LA 0.81 MK 0.89 NL 0.93 OV 0.96 ! PT 1.07 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.994 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.12 HN 1.13 KP 0.95 ! LA 0.89 MK 1.05 NL 1.06 OV 0.96 ! PT 0.91 SC 0.97 ! ! ! Fit before self-cal, rms=0.428848Jy sigma=0.001319 ! Fit after self-cal, rms=0.403855Jy sigma=0.001272 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403855Jy sigma=0.001272 ! Fit after self-cal, rms=0.403858Jy sigma=0.001272 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.537 mas, bmaj=9.759 mas, bpa=-5.059 degrees ! Estimated noise=1235.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -9). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319883 Jy ! Component: 100 - total flux cleaned = 0.0423705 Jy ! Component: 150 - total flux cleaned = 0.043745 Jy ! Component: 200 - total flux cleaned = 0.044544 Jy ! Total flux subtracted in 200 components = 0.044544 Jy ! Clean residual min=-0.008102 max=0.013423 Jy/beam ! Clean residual mean=0.000333 rms=0.002928 Jy/beam ! Combined flux in latest and established models = 0.919729 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 51 components and 0.919729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.400797Jy sigma=0.001263 ! Fit after self-cal, rms=0.400601Jy sigma=0.001262 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.400601Jy sigma=0.001262 ! Fit after self-cal, rms=0.396630Jy sigma=0.001246 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0074395 Jy ! Component: 100 - total flux cleaned = 0.00745544 Jy ! Component: 150 - total flux cleaned = 0.00746167 Jy ! Component: 200 - total flux cleaned = 0.0077791 Jy ! Total flux subtracted in 200 components = 0.0077791 Jy ! Clean residual min=-0.009255 max=0.011916 Jy/beam ! Clean residual mean=0.000278 rms=0.002725 Jy/beam ! Combined flux in latest and established models = 0.927508 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 66 components and 0.927508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395373Jy sigma=0.001244 ! Fit after self-cal, rms=0.394772Jy sigma=0.001242 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.537 x 9.759 at -5.059 degrees (North through East) ! Clean map min=-0.0096433 max=0.78594 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.394772Jy sigma=0.001242 ! Fit after self-cal, rms=0.977987Jy sigma=0.001223 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.977987Jy sigma=0.001223 ! Fit after self-cal, rms=0.977789Jy sigma=0.001223 ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=10 mas, bpa=-5.287 degrees ! Estimated noise=1227.56 mJy/beam. ! Added new window around map position (15, -6.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137867 Jy ! Component: 100 - total flux cleaned = 0.0195387 Jy ! Component: 150 - total flux cleaned = 0.0209855 Jy ! Component: 200 - total flux cleaned = 0.0211812 Jy ! Total flux subtracted in 200 components = 0.0211812 Jy ! Clean residual min=-0.005498 max=0.006150 Jy/beam ! Clean residual mean=0.000059 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.948689 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 89 components and 0.948689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.977623Jy sigma=0.001220 ! Fit after self-cal, rms=0.977506Jy sigma=0.001220 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.977506Jy sigma=0.001220 ! Fit after self-cal, rms=1.109587Jy sigma=0.001218 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.109587Jy sigma=0.001218 ! Fit after self-cal, rms=1.109551Jy sigma=0.001218 ! Inverting map and beam ! Estimated beam: bmin=3.492 mas, bmaj=9.989 mas, bpa=-5.231 degrees ! Estimated noise=1226.15 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044892 Jy ! Component: 100 - total flux cleaned = 0.00573337 Jy ! Component: 150 - total flux cleaned = 0.00617199 Jy ! Component: 200 - total flux cleaned = 0.00630498 Jy ! Total flux subtracted in 200 components = 0.00630498 Jy ! Clean residual min=-0.004700 max=0.005662 Jy/beam ! Clean residual mean=0.000097 rms=0.001417 Jy/beam ! Combined flux in latest and established models = 0.954993 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 108 components and 0.954993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.109503Jy sigma=0.001218 ! Fit after self-cal, rms=1.109480Jy sigma=0.001217 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.569 mas, bmaj=18.87 mas, bpa=4.924 degrees ! Estimated noise=1509.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016278 Jy ! Component: 100 - total flux cleaned = 0.00189826 Jy ! Component: 150 - total flux cleaned = 0.00204628 Jy ! Component: 200 - total flux cleaned = 0.00218348 Jy ! Total flux subtracted in 200 components = 0.00218348 Jy ! Clean residual min=-0.005166 max=0.005677 Jy/beam ! Clean residual mean=0.000132 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.957177 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 127 components and 0.957177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.109484Jy sigma=0.001217 ! Fit after self-cal, rms=1.109467Jy sigma=0.001217 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.651 mas, bmaj=7.634 mas, bpa=-6.173 degrees ! Estimated noise=2420.83 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.662389 Jy ! Component: 100 - total flux cleaned = 0.79045 Jy ! Component: 150 - total flux cleaned = 0.843317 Jy ! Component: 200 - total flux cleaned = 0.872859 Jy ! Total flux subtracted in 200 components = 0.872859 Jy ! Clean residual min=-0.009849 max=0.011671 Jy/beam ! Clean residual mean=0.000200 rms=0.003084 Jy/beam ! Combined flux in latest and established models = 0.872858 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.872858 Jy ! Inverting map and beam ! Estimated beam: bmin=3.492 mas, bmaj=9.989 mas, bpa=-5.231 degrees ! Estimated noise=1226.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297298 Jy ! Component: 100 - total flux cleaned = 0.0464131 Jy ! Component: 150 - total flux cleaned = 0.05764 Jy ! Component: 200 - total flux cleaned = 0.0657117 Jy ! Total flux subtracted in 200 components = 0.0657117 Jy ! Clean residual min=-0.004466 max=0.005241 Jy/beam ! Clean residual mean=0.000251 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.93857 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 99 components and 0.93857 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.569 mas, bmaj=18.87 mas, bpa=4.924 degrees ! Estimated noise=1509.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803039 Jy ! Component: 100 - total flux cleaned = 0.0128271 Jy ! Component: 150 - total flux cleaned = 0.014774 Jy ! Component: 200 - total flux cleaned = 0.0157547 Jy ! Total flux subtracted in 200 components = 0.0157547 Jy ! Clean residual min=-0.004960 max=0.005312 Jy/beam ! Clean residual mean=0.000175 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.954325 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 138 components and 0.954325 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.492 mas, bmaj=9.989 mas, bpa=-5.231 degrees ! Estimated noise=1226.15 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000843065 Jy ! Component: 100 - total flux cleaned = -0.000848477 Jy ! Component: 150 - total flux cleaned = -0.000745692 Jy ! Component: 200 - total flux cleaned = -0.000560088 Jy ! Total flux subtracted in 200 components = -0.000560088 Jy ! Clean residual min=-0.003829 max=0.005211 Jy/beam ! Clean residual mean=0.000097 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.953765 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 165 components and 0.953765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.109624Jy sigma=0.001216 ! Fit after self-cal, rms=1.109631Jy sigma=0.001216 wmodel J1258-2219_S_1997_07_02_yyk\_map.mod ! Writing 165 model components to file: J1258-2219_S_1997_07_02_yyk_map.mod wobs J1258-2219_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J1258-2219_S_1997_07_02_yyk_uvs.fits wwins J1258-2219_S_1997_07_02_yyk\_map.win ! wwins: Wrote 3 windows to J1258-2219_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019186 Jy ! Component: 100 - total flux cleaned = 0.00234413 Jy ! Component: 150 - total flux cleaned = 0.00222049 Jy ! Component: 200 - total flux cleaned = 0.00210019 Jy ! Component: 250 - total flux cleaned = 0.00204293 Jy ! Component: 300 - total flux cleaned = 0.00220545 Jy ! Component: 350 - total flux cleaned = 0.00241521 Jy ! Component: 400 - total flux cleaned = 0.00261874 Jy ! Component: 450 - total flux cleaned = 0.00261963 Jy ! Component: 500 - total flux cleaned = 0.00276319 Jy ! Component: 550 - total flux cleaned = 0.00290172 Jy ! Component: 600 - total flux cleaned = 0.00299154 Jy ! Component: 650 - total flux cleaned = 0.00312419 Jy ! Component: 700 - total flux cleaned = 0.00325286 Jy ! Component: 750 - total flux cleaned = 0.0032943 Jy ! Component: 800 - total flux cleaned = 0.00337568 Jy ! Component: 850 - total flux cleaned = 0.00333548 Jy ! Component: 900 - total flux cleaned = 0.00337426 Jy ! Component: 950 - total flux cleaned = 0.0034515 Jy ! Component: 1000 - total flux cleaned = 0.00356436 Jy ! Component: 1050 - total flux cleaned = 0.00371173 Jy ! Component: 1100 - total flux cleaned = 0.00367528 Jy ! Component: 1150 - total flux cleaned = 0.00381823 Jy ! Component: 1200 - total flux cleaned = 0.0038536 Jy ! Component: 1250 - total flux cleaned = 0.00399176 Jy ! Component: 1300 - total flux cleaned = 0.00416102 Jy ! Component: 1350 - total flux cleaned = 0.00422783 Jy ! Component: 1400 - total flux cleaned = 0.00435944 Jy ! Component: 1450 - total flux cleaned = 0.00448919 Jy ! Component: 1500 - total flux cleaned = 0.00461739 Jy ! Component: 1550 - total flux cleaned = 0.00471133 Jy ! Component: 1600 - total flux cleaned = 0.00483549 Jy ! Component: 1650 - total flux cleaned = 0.00489689 Jy ! Component: 1700 - total flux cleaned = 0.00507761 Jy ! Component: 1750 - total flux cleaned = 0.00519655 Jy ! Component: 1800 - total flux cleaned = 0.00528431 Jy ! Component: 1850 - total flux cleaned = 0.00540024 Jy ! Component: 1900 - total flux cleaned = 0.00554303 Jy ! Component: 1950 - total flux cleaned = 0.00554321 Jy ! Component: 2000 - total flux cleaned = 0.0056831 Jy ! Total flux subtracted in 2048 components = 0.00565581 Jy ! Clean residual min=-0.001987 max=0.001645 Jy/beam ! Clean residual mean=0.000055 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.95942 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 292 components and 0.95942 Jy ![Exited script file: muppet] wmap "J1258-2219_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.492 x 9.989 at -5.231 degrees (North through East) ! Clean map min=-0.0036598 max=0.79179 Jy/beam ! Writing clean map to FITS file: J1258-2219_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.791791 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000574362 device "J1258-2219_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J1258-2219_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.217619 0.217619 0.435238 0.870475 1.74095 3.4819 6.9638 13.9276 27.8552 55.7104 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.791 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.492 x 9.989 at -5.231 degrees (North through East) ! Clean map min=-0.0036598 max=0.79179 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1258-2219_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J1258-2219_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1258-2219_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 18:10:59 2007