! Started logfile: J1245-1616_X_1997_07_02_yyk_uvs.log on Mon Jan  8 05:49:16 2007
obs J1245-1616_X_1997_07_02_yyk_uva.fits
! Reading UV FITS file: J1245-1616_X_1997_07_02_yyk_uva.fits
! AN table 1: 144 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.973148 visibilities/baseline/integration-bin.
! Found source: J1245-1616
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 753 lines of history.
! 
! Reading 25224 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1245-1616_X_1997_07_02_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.579538 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6785 mas, bmaj=1.79 mas, bpa=-2.249 degrees
! Estimated noise=1199.66 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.430388 Jy
! Component: 100  -  total flux cleaned = 0.527048 Jy
! Total flux subtracted in 100 components = 0.527048 Jy
! Clean residual min=-0.015227 max=0.029063 Jy/beam
! Clean residual mean=-0.000043 rms=0.004386 Jy/beam
! Combined flux in latest and established models = 0.527047 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.527047 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.230893Jy  sigma=0.001465
! Fit after  self-cal, rms=0.230147Jy  sigma=0.001460
! Inverting map and beam 
! Estimated beam: bmin=0.6785 mas, bmaj=1.79 mas, bpa=-2.249 degrees
! Estimated noise=1199.66 mJy/beam.
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0432674 Jy
! Component: 100  -  total flux cleaned = 0.0641864 Jy
! Total flux subtracted in 100 components = 0.0641864 Jy
! Clean residual min=-0.010269 max=0.012327 Jy/beam
! Clean residual mean=-0.000022 rms=0.002872 Jy/beam
! Combined flux in latest and established models = 0.591234 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 27 components and 0.591234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222387Jy  sigma=0.001396
! Fit after  self-cal, rms=0.222039Jy  sigma=0.001394
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=2.286 mas, bpa=-4.644 degrees
! Estimated noise=674.442 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, -0.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223354 Jy
! Component: 100  -  total flux cleaned = 0.0326979 Jy
! Component: 150  -  total flux cleaned = 0.0387767 Jy
! Component: 200  -  total flux cleaned = 0.0425704 Jy
! Total flux subtracted in 200 components = 0.0425704 Jy
! Clean residual min=-0.007416 max=0.007396 Jy/beam
! Clean residual mean=-0.000018 rms=0.002023 Jy/beam
! Combined flux in latest and established models = 0.633804 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 52 components and 0.633804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.220856Jy  sigma=0.001383
! Fit after  self-cal, rms=0.220830Jy  sigma=0.001383
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8768 x 2.286 at -4.644 degrees (North through East)
! Clean map  min=-0.0066261  max=0.50258 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.992119
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.04     KP        1.03     
!   LA        1.03     MK        1.05     NL        1.00     OV        0.99     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00271
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.03     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.00     OV        1.05     
!   PT        0.90     SC        0.98     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00006
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        1.04     KP        1.00     
!   LA        1.00     MK        0.97     NL        0.98     OV        0.98     
!   PT        0.94     SC        1.05     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.997565
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.07     KP        0.98     
!   LA        1.00     MK        0.94     NL        0.99     OV        0.99     
!   PT        0.96     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.220830Jy  sigma=0.001383
! Fit after  self-cal, rms=0.220342Jy  sigma=0.001373
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.220342Jy  sigma=0.001373
! Fit after  self-cal, rms=0.220345Jy  sigma=0.001373
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8771 mas, bmaj=2.285 mas, bpa=-4.814 degrees
! Estimated noise=670.004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00361151 Jy
! Component: 100  -  total flux cleaned = -0.00418522 Jy
! Component: 150  -  total flux cleaned = -0.00456104 Jy
! Component: 200  -  total flux cleaned = -0.00495762 Jy
! Total flux subtracted in 200 components = -0.00495762 Jy
! Clean residual min=-0.004037 max=0.003743 Jy/beam
! Clean residual mean=0.000004 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 0.628846 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 68 components and 0.628846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.220250Jy  sigma=0.001372
! Fit after  self-cal, rms=0.220245Jy  sigma=0.001372
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.220245Jy  sigma=0.001372
! Fit after  self-cal, rms=0.199271Jy  sigma=0.001248
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00318637 Jy
! Component: 100  -  total flux cleaned = 0.00275379 Jy
! Component: 150  -  total flux cleaned = 0.00223893 Jy
! Component: 200  -  total flux cleaned = 0.00210005 Jy
! Total flux subtracted in 200 components = 0.00210005 Jy
! Clean residual min=-0.004055 max=0.003913 Jy/beam
! Clean residual mean=0.000011 rms=0.001069 Jy/beam
! Combined flux in latest and established models = 0.630947 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 78 components and 0.630946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198894Jy  sigma=0.001245
! Fit after  self-cal, rms=0.196345Jy  sigma=0.001230
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8771 x 2.285 at -4.814 degrees (North through East)
! Clean map  min=-0.0038955  max=0.5105 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.196345Jy  sigma=0.001230
! Fit after  self-cal, rms=0.195492Jy  sigma=0.001227
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195492Jy  sigma=0.001227
! Fit after  self-cal, rms=0.194980Jy  sigma=0.001224
! Inverting map and beam 
! Estimated beam: bmin=0.8728 mas, bmaj=2.27 mas, bpa=-4.577 degrees
! Estimated noise=666.75 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00031682 Jy
! Component: 100  -  total flux cleaned = -0.000558596 Jy
! Component: 150  -  total flux cleaned = -0.000659167 Jy
! Component: 200  -  total flux cleaned = -0.000703935 Jy
! Total flux subtracted in 200 components = -0.000703935 Jy
! Clean residual min=-0.003251 max=0.003256 Jy/beam
! Clean residual mean=0.000013 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.630243 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 93 components and 0.630242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194951Jy  sigma=0.001224
! Fit after  self-cal, rms=0.194799Jy  sigma=0.001223
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194799Jy  sigma=0.001223
! Fit after  self-cal, rms=0.194462Jy  sigma=0.001221
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194462Jy  sigma=0.001221
! Fit after  self-cal, rms=0.194426Jy  sigma=0.001221
! Inverting map and beam 
! Estimated beam: bmin=0.8724 mas, bmaj=2.266 mas, bpa=-4.543 degrees
! Estimated noise=666.219 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000282415 Jy
! Component: 100  -  total flux cleaned = -0.00046432 Jy
! Component: 150  -  total flux cleaned = -0.000543085 Jy
! Component: 200  -  total flux cleaned = -0.000543733 Jy
! Total flux subtracted in 200 components = -0.000543733 Jy
! Clean residual min=-0.003180 max=0.003134 Jy/beam
! Clean residual mean=0.000013 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.629699 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 104 components and 0.629699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194410Jy  sigma=0.001221
! Fit after  self-cal, rms=0.194395Jy  sigma=0.001221
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.288 mas, bmaj=4.768 mas, bpa=2.622 degrees
! Estimated noise=858.08 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 6.35034e-05 Jy
! Component: 100  -  total flux cleaned = 9.98253e-05 Jy
! Component: 150  -  total flux cleaned = 7.07866e-05 Jy
! Component: 200  -  total flux cleaned = 2.16334e-05 Jy
! Total flux subtracted in 200 components = 2.16334e-05 Jy
! Clean residual min=-0.002873 max=0.002712 Jy/beam
! Clean residual mean=0.000026 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.62972 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 110 components and 0.62972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194392Jy  sigma=0.001221
! Fit after  self-cal, rms=0.194387Jy  sigma=0.001221
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6753 mas, bmaj=1.78 mas, bpa=-2.246 degrees
! Estimated noise=1188.04 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.438955 Jy
! Component: 100  -  total flux cleaned = 0.539103 Jy
! Component: 150  -  total flux cleaned = 0.578416 Jy
! Component: 200  -  total flux cleaned = 0.59913 Jy
! Total flux subtracted in 200 components = 0.59913 Jy
! Clean residual min=-0.006607 max=0.007705 Jy/beam
! Clean residual mean=-0.000011 rms=0.001735 Jy/beam
! Combined flux in latest and established models = 0.599129 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.599129 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8724 mas, bmaj=2.266 mas, bpa=-4.543 degrees
! Estimated noise=666.219 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159936 Jy
! Component: 100  -  total flux cleaned = 0.0233412 Jy
! Component: 150  -  total flux cleaned = 0.0266374 Jy
! Component: 200  -  total flux cleaned = 0.0274825 Jy
! Total flux subtracted in 200 components = 0.0274825 Jy
! Clean residual min=-0.003165 max=0.003346 Jy/beam
! Clean residual mean=0.000011 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.626612 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 43 components and 0.626612 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.288 mas, bmaj=4.768 mas, bpa=2.622 degrees
! Estimated noise=858.08 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161305 Jy
! Component: 100  -  total flux cleaned = 0.00186264 Jy
! Component: 150  -  total flux cleaned = 0.00207875 Jy
! Component: 200  -  total flux cleaned = 0.00226496 Jy
! Total flux subtracted in 200 components = 0.00226496 Jy
! Clean residual min=-0.002764 max=0.002794 Jy/beam
! Clean residual mean=0.000026 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.628877 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 52 components and 0.628877 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8724 mas, bmaj=2.266 mas, bpa=-4.543 degrees
! Estimated noise=666.219 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000119141 Jy
! Component: 100  -  total flux cleaned = -5.7271e-05 Jy
! Component: 150  -  total flux cleaned = 4.76424e-05 Jy
! Component: 200  -  total flux cleaned = 4.89024e-05 Jy
! Total flux subtracted in 200 components = 4.89024e-05 Jy
! Clean residual min=-0.003016 max=0.003133 Jy/beam
! Clean residual mean=0.000013 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.628926 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 64 components and 0.628926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194396Jy  sigma=0.001221
! Fit after  self-cal, rms=0.194393Jy  sigma=0.001221
wmodel J1245-1616_X_1997_07_02_yyk\_map.mod
! Writing 64 model components to file: J1245-1616_X_1997_07_02_yyk_map.mod
wobs J1245-1616_X_1997_07_02_yyk\_uvs.fits
! Writing UV FITS file: J1245-1616_X_1997_07_02_yyk_uvs.fits
wwins J1245-1616_X_1997_07_02_yyk\_map.win
! wwins: Wrote 2 windows to J1245-1616_X_1997_07_02_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 6.67941e-05 Jy
! Component: 100  -  total flux cleaned = -0.000140513 Jy
! Component: 150  -  total flux cleaned = -9.12454e-05 Jy
! Component: 200  -  total flux cleaned = 0.000226668 Jy
! Component: 250  -  total flux cleaned = 0.000485797 Jy
! Component: 300  -  total flux cleaned = 0.000651786 Jy
! Component: 350  -  total flux cleaned = 0.000850774 Jy
! Component: 400  -  total flux cleaned = 0.00100475 Jy
! Component: 450  -  total flux cleaned = 0.0012297 Jy
! Component: 500  -  total flux cleaned = 0.00137604 Jy
! Component: 550  -  total flux cleaned = 0.00158974 Jy
! Component: 600  -  total flux cleaned = 0.00169325 Jy
! Component: 650  -  total flux cleaned = 0.00169347 Jy
! Component: 700  -  total flux cleaned = 0.00172731 Jy
! Component: 750  -  total flux cleaned = 0.00172733 Jy
! Component: 800  -  total flux cleaned = 0.00169528 Jy
! Component: 850  -  total flux cleaned = 0.00178874 Jy
! Component: 900  -  total flux cleaned = 0.00163522 Jy
! Component: 950  -  total flux cleaned = 0.00163621 Jy
! Component: 1000  -  total flux cleaned = 0.00172596 Jy
! Component: 1050  -  total flux cleaned = 0.00181325 Jy
! Component: 1100  -  total flux cleaned = 0.00175511 Jy
! Component: 1150  -  total flux cleaned = 0.00172739 Jy
! Component: 1200  -  total flux cleaned = 0.00186662 Jy
! Component: 1250  -  total flux cleaned = 0.00186735 Jy
! Component: 1300  -  total flux cleaned = 0.002057 Jy
! Component: 1350  -  total flux cleaned = 0.00218981 Jy
! Component: 1400  -  total flux cleaned = 0.00226796 Jy
! Component: 1450  -  total flux cleaned = 0.00218961 Jy
! Component: 1500  -  total flux cleaned = 0.00226681 Jy
! Component: 1550  -  total flux cleaned = 0.00231771 Jy
! Component: 1600  -  total flux cleaned = 0.00241817 Jy
! Component: 1650  -  total flux cleaned = 0.00246826 Jy
! Component: 1700  -  total flux cleaned = 0.00261569 Jy
! Component: 1750  -  total flux cleaned = 0.00266407 Jy
! Component: 1800  -  total flux cleaned = 0.00271233 Jy
! Component: 1850  -  total flux cleaned = 0.00280769 Jy
! Component: 1900  -  total flux cleaned = 0.00285469 Jy
! Component: 1950  -  total flux cleaned = 0.0029012 Jy
! Component: 2000  -  total flux cleaned = 0.00297038 Jy
! Total flux subtracted in 2048 components = 0.00294712 Jy
! Clean residual min=-0.001441 max=0.001242 Jy/beam
! Clean residual mean=0.000006 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.631873 Jy
keep
! Adding 143 model components to the UV plane model.
! The established model now contains 207 components and 0.631873 Jy
![Exited script file: muppet]
wmap "J1245-1616_X_1997_07_02_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8724 x 2.266 at -4.543 degrees (North through East)
! Clean map  min=-0.0022794  max=0.50796 Jy/beam
! Writing clean map to FITS file: J1245-1616_X_1997_07_02_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.507964 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000431176 
device "J1245-1616_X_1997_07_02_yyk\_map.eps/VPS"
! Attempting to open device: 'J1245-1616_X_1997_07_02_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.25465 0.25465 0.509299 1.0186 2.0372 4.07439 8.14879 16.2976 32.5952 65.1903
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.507 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8724 x 2.266 at -4.543 degrees (North through East)
! Clean map  min=-0.0022794  max=0.50796 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1245-1616_X_1997_07_02_yyk\_map.gif/gif"
! Attempting to open device: 'J1245-1616_X_1997_07_02_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1245-1616_X_1997_07_02_yyk_uvs.log closed on Mon Jan  8 05:49:25 2007