! Started logfile: J1233-1025_X_1997_05_07_yyk_uvs.log on Mon Jan  8 05:46:28 2007
obs J1233-1025_X_1997_05_07_yyk_uva.fits
! Reading UV FITS file: J1233-1025_X_1997_05_07_yyk_uva.fits
! AN table 1: 138 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.83591 visibilities/baseline/integration-bin.
! Found source: J1233-1025
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.15447e+09        8e+06          1        8e+06
!  02        2  8.23447e+09        8e+06          1        8e+06
!  03        3  8.41447e+09        8e+06          1        8e+06
!  04        4  8.55447e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 613 lines of history.
! 
! Reading 20764 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1233-1025_X_1997_05_07_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.248608 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7357 mas, bmaj=2.016 mas, bpa=1.138 degrees
! Estimated noise=1185.17 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.12537 Jy
! Component: 100  -  total flux cleaned = 0.158157 Jy
! Total flux subtracted in 100 components = 0.158157 Jy
! Clean residual min=-0.010051 max=0.016514 Jy/beam
! Clean residual mean=-0.000036 rms=0.002820 Jy/beam
! Combined flux in latest and established models = 0.158157 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.158157 Jy
! 
! Correcting IF 1.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.193455Jy  sigma=0.001259
! Fit after  self-cal, rms=0.193254Jy  sigma=0.001258
! Inverting map and beam 
! Estimated beam: bmin=0.7357 mas, bmaj=2.016 mas, bpa=1.138 degrees
! Estimated noise=1185.71 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9272 mas, bmaj=2.418 mas, bpa=-0.3533 degrees
! Estimated noise=717.643 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0330652 Jy
! Component: 100  -  total flux cleaned = 0.0494369 Jy
! Component: 150  -  total flux cleaned = 0.0587942 Jy
! Component: 200  -  total flux cleaned = 0.064432 Jy
! Total flux subtracted in 200 components = 0.064432 Jy
! Clean residual min=-0.006825 max=0.008700 Jy/beam
! Clean residual mean=0.000002 rms=0.002046 Jy/beam
! Combined flux in latest and established models = 0.222589 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 49 components and 0.222589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.190006Jy  sigma=0.001229
! Fit after  self-cal, rms=0.189725Jy  sigma=0.001227
! Inverting map 
! Added new window around map position (3.6, 3.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133066 Jy
! Component: 100  -  total flux cleaned = 0.0183877 Jy
! Component: 150  -  total flux cleaned = 0.0210827 Jy
! Component: 200  -  total flux cleaned = 0.0216645 Jy
! Total flux subtracted in 200 components = 0.0216645 Jy
! Clean residual min=-0.004558 max=0.006321 Jy/beam
! Clean residual mean=0.000005 rms=0.001308 Jy/beam
! Combined flux in latest and established models = 0.244253 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 85 components and 0.244253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189182Jy  sigma=0.001223
! Fit after  self-cal, rms=0.189070Jy  sigma=0.001222
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9272 x 2.418 at -0.3533 degrees (North through East)
! Clean map  min=-0.0037186  max=0.1426 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01329
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.01     KP        1.02     
!   LA        1.02     MK        0.99     NL        1.00     OV        1.01     
!   PT        0.94     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00554
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.02     KP        1.01     
!   LA        0.99     MK        0.95     NL        1.02     OV        1.04     
!   PT        0.90     SC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.98664
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.04     KP        1.02     
!   LA        1.01     MK        0.95     NL        1.10     OV        1.04     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.986786
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.03     KP        1.01     
!   LA        1.02     MK        0.94     NL        1.09     OV        1.06     
!   PT        0.96     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.189070Jy  sigma=0.001222
! Fit after  self-cal, rms=0.190736Jy  sigma=0.001220
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.190736Jy  sigma=0.001220
! Fit after  self-cal, rms=0.190737Jy  sigma=0.001220
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9176 mas, bmaj=2.41 mas, bpa=-0.8175 degrees
! Estimated noise=713.453 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00032629 Jy
! Component: 100  -  total flux cleaned = 0.000337388 Jy
! Component: 150  -  total flux cleaned = 0.000263764 Jy
! Component: 200  -  total flux cleaned = 4.09912e-05 Jy
! Total flux subtracted in 200 components = 4.09912e-05 Jy
! Clean residual min=-0.003655 max=0.003645 Jy/beam
! Clean residual mean=0.000008 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.244294 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 107 components and 0.244294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.190675Jy  sigma=0.001220
! Fit after  self-cal, rms=0.190668Jy  sigma=0.001220
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.190668Jy  sigma=0.001220
! Fit after  self-cal, rms=0.189893Jy  sigma=0.001214
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149709 Jy
! Component: 100  -  total flux cleaned = 0.0016044 Jy
! Component: 150  -  total flux cleaned = 0.00147115 Jy
! Component: 200  -  total flux cleaned = 0.00143272 Jy
! Total flux subtracted in 200 components = 0.00143272 Jy
! Clean residual min=-0.003461 max=0.003690 Jy/beam
! Clean residual mean=0.000009 rms=0.000895 Jy/beam
! Combined flux in latest and established models = 0.245727 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 124 components and 0.245727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189870Jy  sigma=0.001214
! Fit after  self-cal, rms=0.189740Jy  sigma=0.001213
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9176 x 2.41 at -0.8175 degrees (North through East)
! Clean map  min=-0.00335  max=0.14233 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189740Jy  sigma=0.001213
! Fit after  self-cal, rms=0.189801Jy  sigma=0.001213
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189801Jy  sigma=0.001213
! Fit after  self-cal, rms=0.189771Jy  sigma=0.001213
! Inverting map and beam 
! Estimated beam: bmin=0.9201 mas, bmaj=2.414 mas, bpa=-0.7083 degrees
! Estimated noise=705.732 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0017728 Jy
! Component: 100  -  total flux cleaned = -0.00177589 Jy
! Component: 150  -  total flux cleaned = -0.00177278 Jy
! Component: 200  -  total flux cleaned = -0.00177386 Jy
! Total flux subtracted in 200 components = -0.00177386 Jy
! Clean residual min=-0.003205 max=0.003162 Jy/beam
! Clean residual mean=0.000007 rms=0.000847 Jy/beam
! Combined flux in latest and established models = 0.243953 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 142 components and 0.243953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189739Jy  sigma=0.001212
! Fit after  self-cal, rms=0.189727Jy  sigma=0.001212
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189727Jy  sigma=0.001212
! Fit after  self-cal, rms=0.191752Jy  sigma=0.001211
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191752Jy  sigma=0.001211
! Fit after  self-cal, rms=0.191751Jy  sigma=0.001211
! Inverting map and beam 
! Estimated beam: bmin=0.9234 mas, bmaj=2.42 mas, bpa=-0.5645 degrees
! Estimated noise=704.085 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000928211 Jy
! Component: 100  -  total flux cleaned = -0.000823266 Jy
! Component: 150  -  total flux cleaned = -0.000824002 Jy
! Component: 200  -  total flux cleaned = -0.000876671 Jy
! Total flux subtracted in 200 components = -0.000876671 Jy
! Clean residual min=-0.003133 max=0.003100 Jy/beam
! Clean residual mean=0.000000 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.243076 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 152 components and 0.243076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191734Jy  sigma=0.001211
! Fit after  self-cal, rms=0.191733Jy  sigma=0.001211
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.408 mas, bmaj=4.336 mas, bpa=2.033 degrees
! Estimated noise=893.396 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000501422 Jy
! Component: 100  -  total flux cleaned = 0.000663605 Jy
! Component: 150  -  total flux cleaned = 0.000664179 Jy
! Component: 200  -  total flux cleaned = 0.000691015 Jy
! Total flux subtracted in 200 components = 0.000691015 Jy
! Clean residual min=-0.003730 max=0.004267 Jy/beam
! Clean residual mean=-0.000001 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 0.243767 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 164 components and 0.243767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191731Jy  sigma=0.001211
! Fit after  self-cal, rms=0.191731Jy  sigma=0.001211
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7305 mas, bmaj=2.012 mas, bpa=1.024 degrees
! Estimated noise=1178.67 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.12608 Jy
! Component: 100  -  total flux cleaned = 0.160717 Jy
! Component: 150  -  total flux cleaned = 0.18158 Jy
! Component: 200  -  total flux cleaned = 0.196324 Jy
! Total flux subtracted in 200 components = 0.196324 Jy
! Clean residual min=-0.007055 max=0.007086 Jy/beam
! Clean residual mean=-0.000021 rms=0.002012 Jy/beam
! Combined flux in latest and established models = 0.196324 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.196324 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9234 mas, bmaj=2.42 mas, bpa=-0.5645 degrees
! Estimated noise=704.085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0190644 Jy
! Component: 100  -  total flux cleaned = 0.0293219 Jy
! Component: 150  -  total flux cleaned = 0.0356964 Jy
! Component: 200  -  total flux cleaned = 0.0399062 Jy
! Total flux subtracted in 200 components = 0.0399062 Jy
! Clean residual min=-0.003611 max=0.003386 Jy/beam
! Clean residual mean=-0.000006 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.23623 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 97 components and 0.23623 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.408 mas, bmaj=4.336 mas, bpa=2.033 degrees
! Estimated noise=893.396 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0042857 Jy
! Component: 100  -  total flux cleaned = 0.00646585 Jy
! Component: 150  -  total flux cleaned = 0.00700918 Jy
! Component: 200  -  total flux cleaned = 0.00718392 Jy
! Total flux subtracted in 200 components = 0.00718392 Jy
! Clean residual min=-0.003829 max=0.004497 Jy/beam
! Clean residual mean=-0.000003 rms=0.001134 Jy/beam
! Combined flux in latest and established models = 0.243414 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 119 components and 0.243414 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9234 mas, bmaj=2.42 mas, bpa=-0.5645 degrees
! Estimated noise=704.085 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000683443 Jy
! Component: 100  -  total flux cleaned = -0.000791064 Jy
! Component: 150  -  total flux cleaned = -0.000694581 Jy
! Component: 200  -  total flux cleaned = -0.000651617 Jy
! Total flux subtracted in 200 components = -0.000651617 Jy
! Clean residual min=-0.003212 max=0.003260 Jy/beam
! Clean residual mean=-0.000001 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.242762 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 138 components and 0.242762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191751Jy  sigma=0.001212
! Fit after  self-cal, rms=0.191747Jy  sigma=0.001212
wmodel J1233-1025_X_1997_05_07_yyk\_map.mod
! Writing 138 model components to file: J1233-1025_X_1997_05_07_yyk_map.mod
wobs J1233-1025_X_1997_05_07_yyk\_uvs.fits
! Writing UV FITS file: J1233-1025_X_1997_05_07_yyk_uvs.fits
wwins J1233-1025_X_1997_05_07_yyk\_map.win
! wwins: Wrote 3 windows to J1233-1025_X_1997_05_07_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.9466e-05 Jy
! Component: 100  -  total flux cleaned = 0.000158037 Jy
! Component: 150  -  total flux cleaned = 0.000208349 Jy
! Component: 200  -  total flux cleaned = 0.000163324 Jy
! Component: 250  -  total flux cleaned = 7.69264e-05 Jy
! Component: 300  -  total flux cleaned = -4.87271e-05 Jy
! Component: 350  -  total flux cleaned = -0.000211285 Jy
! Component: 400  -  total flux cleaned = -0.000405771 Jy
! Component: 450  -  total flux cleaned = -0.000443796 Jy
! Component: 500  -  total flux cleaned = -0.00048058 Jy
! Component: 550  -  total flux cleaned = -0.000480933 Jy
! Component: 600  -  total flux cleaned = -0.000480492 Jy
! Component: 650  -  total flux cleaned = -0.000379938 Jy
! Component: 700  -  total flux cleaned = -0.000380366 Jy
! Component: 750  -  total flux cleaned = -0.000412314 Jy
! Component: 800  -  total flux cleaned = -0.000317886 Jy
! Component: 850  -  total flux cleaned = -0.000441553 Jy
! Component: 900  -  total flux cleaned = -0.0004114 Jy
! Component: 950  -  total flux cleaned = -0.000500959 Jy
! Component: 1000  -  total flux cleaned = -0.000530556 Jy
! Component: 1050  -  total flux cleaned = -0.000530839 Jy
! Component: 1100  -  total flux cleaned = -0.000531138 Jy
! Component: 1150  -  total flux cleaned = -0.000587166 Jy
! Component: 1200  -  total flux cleaned = -0.000669899 Jy
! Component: 1250  -  total flux cleaned = -0.000750877 Jy
! Component: 1300  -  total flux cleaned = -0.000830299 Jy
! Component: 1350  -  total flux cleaned = -0.000909049 Jy
! Component: 1400  -  total flux cleaned = -0.000986524 Jy
! Component: 1450  -  total flux cleaned = -0.0010377 Jy
! Component: 1500  -  total flux cleaned = -0.00123892 Jy
! Component: 1550  -  total flux cleaned = -0.00128792 Jy
! Component: 1600  -  total flux cleaned = -0.00128824 Jy
! Component: 1650  -  total flux cleaned = -0.00133678 Jy
! Component: 1700  -  total flux cleaned = -0.00145644 Jy
! Component: 1750  -  total flux cleaned = -0.00143228 Jy
! Component: 1800  -  total flux cleaned = -0.00147871 Jy
! Component: 1850  -  total flux cleaned = -0.00157096 Jy
! Component: 1900  -  total flux cleaned = -0.00163966 Jy
! Component: 1950  -  total flux cleaned = -0.0017525 Jy
! Component: 2000  -  total flux cleaned = -0.00181936 Jy
! Total flux subtracted in 2048 components = -0.00181946 Jy
! Clean residual min=-0.001485 max=0.001589 Jy/beam
! Clean residual mean=-0.000002 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.240943 Jy
keep
! Adding 147 model components to the UV plane model.
! The established model now contains 285 components and 0.240943 Jy
![Exited script file: muppet]
wmap "J1233-1025_X_1997_05_07_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9234 x 2.42 at -0.5645 degrees (North through East)
! Clean map  min=-0.0022434  max=0.14154 Jy/beam
! Writing clean map to FITS file: J1233-1025_X_1997_05_07_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.141537 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000433211 
device "J1233-1025_X_1997_05_07_yyk\_map.eps/VPS"
! Attempting to open device: 'J1233-1025_X_1997_05_07_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.91823 0.91823 1.83646 3.67292 7.34584 14.6917 29.3833 58.7667
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.141 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9234 x 2.42 at -0.5645 degrees (North through East)
! Clean map  min=-0.0022434  max=0.14154 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1233-1025_X_1997_05_07_yyk\_map.gif/gif"
! Attempting to open device: 'J1233-1025_X_1997_05_07_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1233-1025_X_1997_05_07_yyk_uvs.log closed on Mon Jan  8 05:46:38 2007