! Started logfile: J1233-1025_S_1997_05_07_yyk_uvs.log on Sun Jan 7 18:06:06 2007 obs J1233-1025_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1233-1025_S_1997_05_07_yyk_uva.fits ! AN table 1: 138 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.87037 visibilities/baseline/integration-bin. ! Found source: J1233-1025 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 21620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1233-1025_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.464014 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=7.971 mas, bpa=-0.5264 degrees ! Estimated noise=2070.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.282502 Jy ! Component: 100 - total flux cleaned = 0.364704 Jy ! Total flux subtracted in 100 components = 0.364704 Jy ! Clean residual min=-0.018084 max=0.031085 Jy/beam ! Clean residual mean=-0.000001 rms=0.006151 Jy/beam ! Combined flux in latest and established models = 0.364704 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.364704 Jy ! ! Correcting IF 1. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.308729Jy sigma=0.001313 ! Fit after self-cal, rms=0.308273Jy sigma=0.001311 ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=7.971 mas, bpa=-0.5262 degrees ! Estimated noise=2070.87 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=9.485 mas, bpa=-2.305 degrees ! Estimated noise=1063.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 4.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0467803 Jy ! Component: 100 - total flux cleaned = 0.0652222 Jy ! Component: 150 - total flux cleaned = 0.0677482 Jy ! Component: 200 - total flux cleaned = 0.0693062 Jy ! Total flux subtracted in 200 components = 0.0693062 Jy ! Clean residual min=-0.009701 max=0.012662 Jy/beam ! Clean residual mean=0.000124 rms=0.002807 Jy/beam ! Combined flux in latest and established models = 0.43401 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 37 components and 0.43401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302875Jy sigma=0.001288 ! Fit after self-cal, rms=0.302568Jy sigma=0.001287 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 9.485 at -2.305 degrees (North through East) ! Clean map min=-0.008923 max=0.29395 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03507 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.94 KP 0.91 ! LA 0.99 MK 1.01 NL 1.00* OV 1.10 ! PT 0.92 SC 0.84 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.990526 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.09 HN 1.06 KP 1.01 ! LA 1.09 MK 0.99 NL 1.02 OV 1.02 ! PT 0.94 SC 0.87 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.05003 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 0.96 KP 0.91 ! LA 0.80 MK 0.88 NL 0.96 OV 0.96 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.983091 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.08 HN 1.05 KP 0.97 ! LA 0.91 MK 1.04 NL 1.08 OV 1.07 ! PT 0.94 SC 1.01 ! ! ! Fit before self-cal, rms=0.302568Jy sigma=0.001287 ! Fit after self-cal, rms=0.294980Jy sigma=0.001279 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294980Jy sigma=0.001279 ! Fit after self-cal, rms=0.294973Jy sigma=0.001279 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.591 mas, bmaj=9.235 mas, bpa=-1.213 degrees ! Estimated noise=1072.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118581 Jy ! Component: 100 - total flux cleaned = 0.014353 Jy ! Component: 150 - total flux cleaned = 0.0149073 Jy ! Component: 200 - total flux cleaned = 0.015387 Jy ! Total flux subtracted in 200 components = 0.015387 Jy ! Clean residual min=-0.007021 max=0.006039 Jy/beam ! Clean residual mean=-0.000026 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 0.449397 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 60 components and 0.449397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294516Jy sigma=0.001277 ! Fit after self-cal, rms=0.294481Jy sigma=0.001277 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294481Jy sigma=0.001277 ! Fit after self-cal, rms=0.293553Jy sigma=0.001272 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029266 Jy ! Component: 100 - total flux cleaned = 0.00333291 Jy ! Component: 150 - total flux cleaned = 0.00345562 Jy ! Component: 200 - total flux cleaned = 0.00345554 Jy ! Total flux subtracted in 200 components = 0.00345554 Jy ! Clean residual min=-0.007414 max=0.005837 Jy/beam ! Clean residual mean=-0.000037 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.452853 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 73 components and 0.452853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293424Jy sigma=0.001272 ! Fit after self-cal, rms=0.293298Jy sigma=0.001271 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.591 x 9.235 at -1.213 degrees (North through East) ! Clean map min=-0.0066027 max=0.29695 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293298Jy sigma=0.001271 ! Fit after self-cal, rms=0.288706Jy sigma=0.001267 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288706Jy sigma=0.001267 ! Fit after self-cal, rms=0.288683Jy sigma=0.001267 ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=9.148 mas, bpa=-1.051 degrees ! Estimated noise=1064.97 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015641 Jy ! Component: 100 - total flux cleaned = 0.00167611 Jy ! Component: 150 - total flux cleaned = 0.0016797 Jy ! Component: 200 - total flux cleaned = 0.00168037 Jy ! Total flux subtracted in 200 components = 0.00168037 Jy ! Clean residual min=-0.006662 max=0.005323 Jy/beam ! Clean residual mean=-0.000087 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.454533 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 87 components and 0.454533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288608Jy sigma=0.001267 ! Fit after self-cal, rms=0.288599Jy sigma=0.001267 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288599Jy sigma=0.001267 ! Fit after self-cal, rms=0.289096Jy sigma=0.001265 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289096Jy sigma=0.001265 ! Fit after self-cal, rms=0.289096Jy sigma=0.001265 ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=9.113 mas, bpa=-0.9081 degrees ! Estimated noise=1064.41 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122015 Jy ! Component: 100 - total flux cleaned = 0.00164797 Jy ! Component: 150 - total flux cleaned = 0.00179033 Jy ! Component: 200 - total flux cleaned = 0.0017888 Jy ! Total flux subtracted in 200 components = 0.0017888 Jy ! Clean residual min=-0.006326 max=0.005397 Jy/beam ! Clean residual mean=-0.000092 rms=0.001562 Jy/beam ! Combined flux in latest and established models = 0.456322 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 0.456322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289056Jy sigma=0.001265 ! Fit after self-cal, rms=0.289055Jy sigma=0.001265 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.078 mas, bmaj=14.74 mas, bpa=1.232 degrees ! Estimated noise=1312.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000967397 Jy ! Component: 100 - total flux cleaned = -0.000955128 Jy ! Component: 150 - total flux cleaned = -0.00095284 Jy ! Component: 200 - total flux cleaned = -0.00100254 Jy ! Total flux subtracted in 200 components = -0.00100254 Jy ! Clean residual min=-0.005384 max=0.007171 Jy/beam ! Clean residual mean=-0.000159 rms=0.001927 Jy/beam ! Combined flux in latest and established models = 0.455319 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 109 components and 0.455319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289060Jy sigma=0.001265 ! Fit after self-cal, rms=0.289052Jy sigma=0.001265 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=7.81 mas, bpa=-0.05882 degrees ! Estimated noise=2055.5 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.284313 Jy ! Component: 100 - total flux cleaned = 0.366309 Jy ! Component: 150 - total flux cleaned = 0.406123 Jy ! Component: 200 - total flux cleaned = 0.424557 Jy ! Total flux subtracted in 200 components = 0.424557 Jy ! Clean residual min=-0.013795 max=0.012149 Jy/beam ! Clean residual mean=-0.000023 rms=0.003727 Jy/beam ! Combined flux in latest and established models = 0.424556 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.424556 Jy ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=9.113 mas, bpa=-0.9081 degrees ! Estimated noise=1064.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193026 Jy ! Component: 100 - total flux cleaned = 0.0267887 Jy ! Component: 150 - total flux cleaned = 0.0275404 Jy ! Component: 200 - total flux cleaned = 0.0281265 Jy ! Total flux subtracted in 200 components = 0.0281265 Jy ! Clean residual min=-0.006533 max=0.005846 Jy/beam ! Clean residual mean=-0.000076 rms=0.001658 Jy/beam ! Combined flux in latest and established models = 0.452683 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 59 components and 0.452683 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.078 mas, bmaj=14.74 mas, bpa=1.232 degrees ! Estimated noise=1312.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221311 Jy ! Component: 100 - total flux cleaned = 0.0025201 Jy ! Component: 150 - total flux cleaned = 0.00245558 Jy ! Component: 200 - total flux cleaned = 0.00234803 Jy ! Total flux subtracted in 200 components = 0.00234803 Jy ! Clean residual min=-0.005595 max=0.007239 Jy/beam ! Clean residual mean=-0.000153 rms=0.001927 Jy/beam ! Combined flux in latest and established models = 0.455031 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.455031 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=9.113 mas, bpa=-0.9081 degrees ! Estimated noise=1064.41 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000324049 Jy ! Component: 100 - total flux cleaned = 0.000101462 Jy ! Component: 150 - total flux cleaned = 0.000227775 Jy ! Component: 200 - total flux cleaned = 0.000336452 Jy ! Total flux subtracted in 200 components = 0.000336452 Jy ! Clean residual min=-0.005927 max=0.005589 Jy/beam ! Clean residual mean=-0.000088 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.455367 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.455367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289100Jy sigma=0.001265 ! Fit after self-cal, rms=0.289092Jy sigma=0.001265 wmodel J1233-1025_S_1997_05_07_yyk\_map.mod ! Writing 94 model components to file: J1233-1025_S_1997_05_07_yyk_map.mod wobs J1233-1025_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1233-1025_S_1997_05_07_yyk_uvs.fits wwins J1233-1025_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J1233-1025_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117763 Jy ! Component: 100 - total flux cleaned = -0.00183907 Jy ! Component: 150 - total flux cleaned = -0.0014947 Jy ! Component: 200 - total flux cleaned = -0.00124997 Jy ! Component: 250 - total flux cleaned = -0.00109545 Jy ! Component: 300 - total flux cleaned = -0.000949889 Jy ! Component: 350 - total flux cleaned = -0.000878767 Jy ! Component: 400 - total flux cleaned = -0.000878515 Jy ! Component: 450 - total flux cleaned = -0.00101094 Jy ! Component: 500 - total flux cleaned = -0.0010109 Jy ! Component: 550 - total flux cleaned = -0.000949288 Jy ! Component: 600 - total flux cleaned = -0.00101043 Jy ! Component: 650 - total flux cleaned = -0.00100984 Jy ! Component: 700 - total flux cleaned = -0.00101018 Jy ! Component: 750 - total flux cleaned = -0.00101095 Jy ! Component: 800 - total flux cleaned = -0.00133953 Jy ! Component: 850 - total flux cleaned = -0.00149905 Jy ! Component: 900 - total flux cleaned = -0.0017079 Jy ! Component: 950 - total flux cleaned = -0.00191134 Jy ! Component: 1000 - total flux cleaned = -0.00211243 Jy ! Component: 1050 - total flux cleaned = -0.00245706 Jy ! Component: 1100 - total flux cleaned = -0.00269851 Jy ! Component: 1150 - total flux cleaned = -0.00303056 Jy ! Component: 1200 - total flux cleaned = -0.00326334 Jy ! Component: 1250 - total flux cleaned = -0.00344789 Jy ! Component: 1300 - total flux cleaned = -0.0038988 Jy ! Component: 1350 - total flux cleaned = -0.00429826 Jy ! Component: 1400 - total flux cleaned = -0.0046036 Jy ! Component: 1450 - total flux cleaned = -0.00503389 Jy ! Component: 1500 - total flux cleaned = -0.00532963 Jy ! Component: 1550 - total flux cleaned = -0.00566346 Jy ! Component: 1600 - total flux cleaned = -0.00574531 Jy ! Component: 1650 - total flux cleaned = -0.00603017 Jy ! Component: 1700 - total flux cleaned = -0.00623078 Jy ! Component: 1750 - total flux cleaned = -0.00650773 Jy ! Component: 1800 - total flux cleaned = -0.00674104 Jy ! Component: 1850 - total flux cleaned = -0.00700981 Jy ! Component: 1900 - total flux cleaned = -0.00719975 Jy ! Component: 1950 - total flux cleaned = -0.0075747 Jy ! Component: 2000 - total flux cleaned = -0.00790867 Jy ! Total flux subtracted in 2048 components = -0.00827528 Jy ! Clean residual min=-0.002849 max=0.001823 Jy/beam ! Clean residual mean=-0.000058 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.447092 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 231 components and 0.447092 Jy ![Exited script file: muppet] wmap "J1233-1025_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.547 x 9.113 at -0.9081 degrees (North through East) ! Clean map min=-0.0038504 max=0.29371 Jy/beam ! Writing clean map to FITS file: J1233-1025_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.293705 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000764855 device "J1233-1025_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1233-1025_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.781247 0.781247 1.56249 3.12499 6.24998 12.5 24.9999 49.9998 99.9996 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.293 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.547 x 9.113 at -0.9081 degrees (North through East) ! Clean map min=-0.0038504 max=0.29371 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1233-1025_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1233-1025_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1233-1025_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 18:06:14 2007