! Started logfile: J1230-1139_X_1997_05_07_yyk_uvs.log on Mon Jan 8 05:45:20 2007 obs J1230-1139_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1230-1139_X_1997_05_07_yyk_uva.fits ! AN table 1: 137 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.842822 visibilities/baseline/integration-bin. ! Found source: J1230-1139 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 20784 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1230-1139_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.244591 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7429 mas, bmaj=2.056 mas, bpa=0.5793 degrees ! Estimated noise=1100.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0734636 Jy ! Component: 100 - total flux cleaned = 0.097399 Jy ! Total flux subtracted in 100 components = 0.097399 Jy ! Clean residual min=-0.014656 max=0.027215 Jy/beam ! Clean residual mean=-0.000067 rms=0.004361 Jy/beam ! Combined flux in latest and established models = 0.097399 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.097399 Jy ! ! Correcting IF 1. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.224171Jy sigma=0.001422 ! Fit after self-cal, rms=0.223745Jy sigma=0.001420 ! Inverting map and beam ! Estimated beam: bmin=0.7429 mas, bmaj=2.056 mas, bpa=0.5793 degrees ! Estimated noise=1100.99 mJy/beam. ! Added new window around map position (-2.4, 1.8). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0325785 Jy ! Component: 100 - total flux cleaned = 0.0498484 Jy ! Total flux subtracted in 100 components = 0.0498484 Jy ! Clean residual min=-0.012596 max=0.025770 Jy/beam ! Clean residual mean=-0.000049 rms=0.003349 Jy/beam ! Combined flux in latest and established models = 0.147247 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 48 components and 0.147247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218473Jy sigma=0.001376 ! Fit after self-cal, rms=0.217142Jy sigma=0.001366 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9265 mas, bmaj=2.433 mas, bpa=-0.5907 degrees ! Estimated noise=723.926 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347699 Jy ! Component: 100 - total flux cleaned = 0.0529106 Jy ! Component: 150 - total flux cleaned = 0.0638504 Jy ! Component: 200 - total flux cleaned = 0.0702095 Jy ! Total flux subtracted in 200 components = 0.0702095 Jy ! Clean residual min=-0.008003 max=0.018226 Jy/beam ! Clean residual mean=-0.000039 rms=0.002585 Jy/beam ! Combined flux in latest and established models = 0.217457 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 69 components and 0.217457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213689Jy sigma=0.001336 ! Fit after self-cal, rms=0.213212Jy sigma=0.001333 ! Inverting map ! Added new window around map position (-4, 1.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156277 Jy ! Component: 100 - total flux cleaned = 0.0204313 Jy ! Component: 150 - total flux cleaned = 0.0209948 Jy ! Component: 200 - total flux cleaned = 0.021149 Jy ! Total flux subtracted in 200 components = 0.021149 Jy ! Clean residual min=-0.007273 max=0.010702 Jy/beam ! Clean residual mean=-0.000045 rms=0.001807 Jy/beam ! Combined flux in latest and established models = 0.238606 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 0.238606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212421Jy sigma=0.001327 ! Fit after self-cal, rms=0.212248Jy sigma=0.001325 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9265 x 2.433 at -0.5907 degrees (North through East) ! Clean map min=-0.0059706 max=0.070051 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01955 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.94 KP 1.02 ! LA 0.98 MK 0.93 NL 1.14 OV 1.05 ! PT 0.88 SC 0.90 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.972275 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.95 KP 1.01 ! LA 0.99 MK 0.95 NL 1.08 OV 1.09 ! PT 0.95 SC 1.18 ! ! ! Fit before self-cal, rms=0.212248Jy sigma=0.001325 ! Fit after self-cal, rms=0.214942Jy sigma=0.001324 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214942Jy sigma=0.001324 ! Fit after self-cal, rms=0.214946Jy sigma=0.001324 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9174 mas, bmaj=2.438 mas, bpa=-1.442 degrees ! Estimated noise=717.926 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814952 Jy ! Component: 100 - total flux cleaned = 0.00115457 Jy ! Component: 150 - total flux cleaned = 0.00103028 Jy ! Component: 200 - total flux cleaned = 0.00103766 Jy ! Total flux subtracted in 200 components = 0.00103766 Jy ! Clean residual min=-0.005395 max=0.006246 Jy/beam ! Clean residual mean=-0.000029 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.239644 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.239644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214727Jy sigma=0.001323 ! Fit after self-cal, rms=0.214698Jy sigma=0.001323 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214698Jy sigma=0.001323 ! Fit after self-cal, rms=0.212014Jy sigma=0.001306 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603081 Jy ! Component: 100 - total flux cleaned = 0.00588613 Jy ! Component: 150 - total flux cleaned = 0.00574302 Jy ! Component: 200 - total flux cleaned = 0.00550049 Jy ! Total flux subtracted in 200 components = 0.00550049 Jy ! Clean residual min=-0.004408 max=0.004964 Jy/beam ! Clean residual mean=-0.000019 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.245144 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 121 components and 0.245144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211751Jy sigma=0.001304 ! Fit after self-cal, rms=0.211585Jy sigma=0.001303 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9174 x 2.438 at -1.442 degrees (North through East) ! Clean map min=-0.0042955 max=0.070175 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.346 mas, bmaj=4.352 mas, bpa=0.6006 degrees ! Estimated noise=914.636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121178 Jy ! Component: 100 - total flux cleaned = 0.00132246 Jy ! Component: 150 - total flux cleaned = 0.00121648 Jy ! Component: 200 - total flux cleaned = 0.00103088 Jy ! Total flux subtracted in 200 components = 0.00103088 Jy ! Clean residual min=-0.004072 max=0.003734 Jy/beam ! Clean residual mean=-0.000039 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.246175 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 127 components and 0.246175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211544Jy sigma=0.001303 ! Fit after self-cal, rms=0.211481Jy sigma=0.001303 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7391 mas, bmaj=2.061 mas, bpa=-0.02492 degrees ! Estimated noise=1099.26 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0883953 Jy ! Component: 100 - total flux cleaned = 0.128069 Jy ! Component: 150 - total flux cleaned = 0.154062 Jy ! Component: 200 - total flux cleaned = 0.17314 Jy ! Total flux subtracted in 200 components = 0.17314 Jy ! Clean residual min=-0.009524 max=0.011264 Jy/beam ! Clean residual mean=-0.000019 rms=0.002527 Jy/beam ! Combined flux in latest and established models = 0.17314 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.17314 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9174 mas, bmaj=2.438 mas, bpa=-1.442 degrees ! Estimated noise=717.926 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 0.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272907 Jy ! Component: 100 - total flux cleaned = 0.0434864 Jy ! Component: 150 - total flux cleaned = 0.0541289 Jy ! Component: 200 - total flux cleaned = 0.0595571 Jy ! Total flux subtracted in 200 components = 0.0595571 Jy ! Clean residual min=-0.004804 max=0.005621 Jy/beam ! Clean residual mean=-0.000023 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.232697 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 92 components and 0.232697 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.346 mas, bmaj=4.352 mas, bpa=0.6006 degrees ! Estimated noise=914.636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857466 Jy ! Component: 100 - total flux cleaned = 0.0100774 Jy ! Component: 150 - total flux cleaned = 0.0102297 Jy ! Component: 200 - total flux cleaned = 0.0103549 Jy ! Total flux subtracted in 200 components = 0.0103549 Jy ! Clean residual min=-0.003435 max=0.004215 Jy/beam ! Clean residual mean=-0.000048 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.243052 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 112 components and 0.243052 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9174 mas, bmaj=2.438 mas, bpa=-1.442 degrees ! Estimated noise=717.926 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000791542 Jy ! Component: 100 - total flux cleaned = -0.00066813 Jy ! Component: 150 - total flux cleaned = -0.00067136 Jy ! Component: 200 - total flux cleaned = -0.000566917 Jy ! Total flux subtracted in 200 components = -0.000566917 Jy ! Clean residual min=-0.004158 max=0.003968 Jy/beam ! Clean residual mean=-0.000029 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.242485 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 134 components and 0.242485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211292Jy sigma=0.001302 ! Fit after self-cal, rms=0.211217Jy sigma=0.001301 wmodel J1230-1139_X_1997_05_07_yyk\_map.mod ! Writing 134 model components to file: J1230-1139_X_1997_05_07_yyk_map.mod wobs J1230-1139_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1230-1139_X_1997_05_07_yyk_uvs.fits wwins J1230-1139_X_1997_05_07_yyk\_map.win ! wwins: Wrote 4 windows to J1230-1139_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188155 Jy ! Component: 100 - total flux cleaned = -0.00272077 Jy ! Component: 150 - total flux cleaned = -0.00304875 Jy ! Component: 200 - total flux cleaned = -0.00323732 Jy ! Component: 250 - total flux cleaned = -0.00341846 Jy ! Component: 300 - total flux cleaned = -0.00330171 Jy ! Component: 350 - total flux cleaned = -0.00324479 Jy ! Component: 400 - total flux cleaned = -0.00313431 Jy ! Component: 450 - total flux cleaned = -0.00308166 Jy ! Component: 500 - total flux cleaned = -0.00308192 Jy ! Component: 550 - total flux cleaned = -0.00318397 Jy ! Component: 600 - total flux cleaned = -0.00323396 Jy ! Component: 650 - total flux cleaned = -0.0032836 Jy ! Component: 700 - total flux cleaned = -0.00333161 Jy ! Component: 750 - total flux cleaned = -0.00342544 Jy ! Component: 800 - total flux cleaned = -0.00347237 Jy ! Component: 850 - total flux cleaned = -0.00374604 Jy ! Component: 900 - total flux cleaned = -0.00379104 Jy ! Component: 950 - total flux cleaned = -0.00383493 Jy ! Component: 1000 - total flux cleaned = -0.00383522 Jy ! Component: 1050 - total flux cleaned = -0.00383511 Jy ! Component: 1100 - total flux cleaned = -0.00387704 Jy ! Component: 1150 - total flux cleaned = -0.00387687 Jy ! Component: 1200 - total flux cleaned = -0.00383562 Jy ! Component: 1250 - total flux cleaned = -0.00391617 Jy ! Component: 1300 - total flux cleaned = -0.00391612 Jy ! Component: 1350 - total flux cleaned = -0.00379755 Jy ! Component: 1400 - total flux cleaned = -0.00387622 Jy ! Component: 1450 - total flux cleaned = -0.00391509 Jy ! Component: 1500 - total flux cleaned = -0.00395334 Jy ! Component: 1550 - total flux cleaned = -0.0038786 Jy ! Component: 1600 - total flux cleaned = -0.00391612 Jy ! Component: 1650 - total flux cleaned = -0.00395194 Jy ! Component: 1700 - total flux cleaned = -0.0037704 Jy ! Component: 1750 - total flux cleaned = -0.00369919 Jy ! Component: 1800 - total flux cleaned = -0.00366435 Jy ! Component: 1850 - total flux cleaned = -0.00369974 Jy ! Component: 1900 - total flux cleaned = -0.00383851 Jy ! Component: 1950 - total flux cleaned = -0.00380475 Jy ! Component: 2000 - total flux cleaned = -0.00397465 Jy ! Total flux subtracted in 2048 components = -0.0039749 Jy ! Clean residual min=-0.001675 max=0.001878 Jy/beam ! Clean residual mean=-0.000010 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.23851 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 276 components and 0.23851 Jy ![Exited script file: muppet] wmap "J1230-1139_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9174 x 2.438 at -1.442 degrees (North through East) ! Clean map min=-0.0045734 max=0.075585 Jy/beam ! Writing clean map to FITS file: J1230-1139_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0755855 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000640062 device "J1230-1139_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1230-1139_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.54042 2.54042 5.08083 10.1617 20.3233 40.6467 81.2933 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9174 x 2.438 at -1.442 degrees (North through East) ! Clean map min=-0.0045734 max=0.075585 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1230-1139_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1230-1139_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1230-1139_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 05:45:28 2007