! Started logfile: J1216-1033_S_1997_05_07_yyk_uvs.log on Sun Jan 7 18:01:43 2007 obs J1216-1033_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J1216-1033_S_1997_05_07_yyk_uva.fits ! AN table 1: 150 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.881778 visibilities/baseline/integration-bin. ! Found source: J1216-1033 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 23808 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1216-1033_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.379836 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=7.975 mas, bpa=-0.2541 degrees ! Estimated noise=1519.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.218181 Jy ! Component: 100 - total flux cleaned = 0.239829 Jy ! Total flux subtracted in 100 components = 0.239829 Jy ! Clean residual min=-0.009067 max=0.011449 Jy/beam ! Clean residual mean=-0.000002 rms=0.002652 Jy/beam ! Combined flux in latest and established models = 0.239829 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.239829 Jy ! ! Correcting IF 1. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.281668Jy sigma=0.001202 ! Fit after self-cal, rms=0.281553Jy sigma=0.001201 ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=7.975 mas, bpa=-0.2541 degrees ! Estimated noise=1519.83 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.655 mas, bmaj=9.469 mas, bpa=-2.217 degrees ! Estimated noise=1013.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.5471e-05 Jy ! Component: 100 - total flux cleaned = 2.79134e-05 Jy ! Component: 150 - total flux cleaned = 0.000187717 Jy ! Component: 200 - total flux cleaned = 0.000610794 Jy ! Total flux subtracted in 200 components = 0.000610794 Jy ! Clean residual min=-0.006879 max=0.008592 Jy/beam ! Clean residual mean=0.000135 rms=0.002229 Jy/beam ! Combined flux in latest and established models = 0.24044 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.24044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281243Jy sigma=0.001201 ! Fit after self-cal, rms=0.281240Jy sigma=0.001201 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.655 x 9.469 at -2.217 degrees (North through East) ! Clean map min=-0.006713 max=0.24483 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02882 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.06 HN 0.94 KP 0.92 ! LA 0.95 MK 1.01 NL 1.00* OV 1.12 ! PT 0.96 SC 0.82 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.978411 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.14 HN 1.10 KP 1.01 ! LA 1.09 MK 1.05 NL 1.03 OV 1.01 ! PT 0.89 SC 0.87 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.05142 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 0.93 KP 0.88 ! LA 0.79 MK 0.90 NL 0.92 OV 0.97 ! PT 1.07 SC 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.988227 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.11 HN 1.06 KP 0.95 ! LA 0.85 MK 0.98 NL 1.11 OV 1.14 ! PT 0.91 SC 1.01 ! ! ! Fit before self-cal, rms=0.281240Jy sigma=0.001201 ! Fit after self-cal, rms=0.274525Jy sigma=0.001194 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274525Jy sigma=0.001194 ! Fit after self-cal, rms=0.274525Jy sigma=0.001194 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=9.261 mas, bpa=-1.091 degrees ! Estimated noise=1016.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423907 Jy ! Component: 100 - total flux cleaned = 0.00449873 Jy ! Component: 150 - total flux cleaned = 0.00459041 Jy ! Component: 200 - total flux cleaned = 0.00455874 Jy ! Total flux subtracted in 200 components = 0.00455874 Jy ! Clean residual min=-0.003862 max=0.005207 Jy/beam ! Clean residual mean=0.000030 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.244999 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.244999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274459Jy sigma=0.001194 ! Fit after self-cal, rms=0.274456Jy sigma=0.001194 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274456Jy sigma=0.001194 ! Fit after self-cal, rms=0.273507Jy sigma=0.001189 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010098 Jy ! Component: 100 - total flux cleaned = 0.000979063 Jy ! Component: 150 - total flux cleaned = 0.000921412 Jy ! Component: 200 - total flux cleaned = 0.000870533 Jy ! Total flux subtracted in 200 components = 0.000870533 Jy ! Clean residual min=-0.004077 max=0.005219 Jy/beam ! Clean residual mean=0.000023 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.245869 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.245869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273491Jy sigma=0.001189 ! Fit after self-cal, rms=0.273381Jy sigma=0.001188 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.607 x 9.261 at -1.091 degrees (North through East) ! Clean map min=-0.0040391 max=0.24859 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273381Jy sigma=0.001188 ! Fit after self-cal, rms=0.269271Jy sigma=0.001186 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269271Jy sigma=0.001186 ! Fit after self-cal, rms=0.269251Jy sigma=0.001186 ! Inverting map and beam ! Estimated beam: bmin=3.596 mas, bmaj=9.248 mas, bpa=-1.119 degrees ! Estimated noise=1012.67 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585314 Jy ! Component: 100 - total flux cleaned = 0.000618735 Jy ! Component: 150 - total flux cleaned = 0.000674038 Jy ! Component: 200 - total flux cleaned = 0.00069902 Jy ! Total flux subtracted in 200 components = 0.00069902 Jy ! Clean residual min=-0.003928 max=0.004084 Jy/beam ! Clean residual mean=0.000020 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.246568 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.246568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269247Jy sigma=0.001186 ! Fit after self-cal, rms=0.269242Jy sigma=0.001186 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269242Jy sigma=0.001186 ! Fit after self-cal, rms=0.270489Jy sigma=0.001184 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270489Jy sigma=0.001184 ! Fit after self-cal, rms=0.270491Jy sigma=0.001184 ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=9.23 mas, bpa=-1.155 degrees ! Estimated noise=1014.35 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000975332 Jy ! Component: 100 - total flux cleaned = 0.00116073 Jy ! Component: 150 - total flux cleaned = 0.00120367 Jy ! Component: 200 - total flux cleaned = 0.00124317 Jy ! Total flux subtracted in 200 components = 0.00124317 Jy ! Clean residual min=-0.003947 max=0.004087 Jy/beam ! Clean residual mean=0.000019 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.247812 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.247812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270486Jy sigma=0.001184 ! Fit after self-cal, rms=0.270488Jy sigma=0.001184 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.154 mas, bmaj=14.88 mas, bpa=0.7983 degrees ! Estimated noise=1246.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656379 Jy ! Component: 100 - total flux cleaned = 0.000708944 Jy ! Component: 150 - total flux cleaned = 0.000728079 Jy ! Component: 200 - total flux cleaned = 0.00072952 Jy ! Total flux subtracted in 200 components = 0.00072952 Jy ! Clean residual min=-0.004819 max=0.005327 Jy/beam ! Clean residual mean=0.000033 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.248541 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.248541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270489Jy sigma=0.001184 ! Fit after self-cal, rms=0.270489Jy sigma=0.001184 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=7.877 mas, bpa=0.02494 degrees ! Estimated noise=1514.6 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.218284 Jy ! Component: 100 - total flux cleaned = 0.244577 Jy ! Component: 150 - total flux cleaned = 0.245376 Jy ! Component: 200 - total flux cleaned = 0.245144 Jy ! Total flux subtracted in 200 components = 0.245144 Jy ! Clean residual min=-0.005684 max=0.006024 Jy/beam ! Clean residual mean=-0.000003 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.245144 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.245144 Jy ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=9.23 mas, bpa=-1.155 degrees ! Estimated noise=1014.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224534 Jy ! Component: 100 - total flux cleaned = 0.00232844 Jy ! Component: 150 - total flux cleaned = 0.00232459 Jy ! Component: 200 - total flux cleaned = 0.00232677 Jy ! Total flux subtracted in 200 components = 0.00232677 Jy ! Clean residual min=-0.003933 max=0.004333 Jy/beam ! Clean residual mean=0.000018 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.247471 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 0.247471 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.154 mas, bmaj=14.88 mas, bpa=0.7983 degrees ! Estimated noise=1246.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718351 Jy ! Component: 100 - total flux cleaned = 0.000797588 Jy ! Component: 150 - total flux cleaned = 0.00076549 Jy ! Component: 200 - total flux cleaned = 0.000795993 Jy ! Total flux subtracted in 200 components = 0.000795993 Jy ! Clean residual min=-0.004722 max=0.005280 Jy/beam ! Clean residual mean=0.000033 rms=0.001534 Jy/beam ! Combined flux in latest and established models = 0.248267 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.248267 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=9.23 mas, bpa=-1.155 degrees ! Estimated noise=1014.35 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000699265 Jy ! Component: 100 - total flux cleaned = -0.00061135 Jy ! Component: 150 - total flux cleaned = -0.000612673 Jy ! Component: 200 - total flux cleaned = -0.000611978 Jy ! Total flux subtracted in 200 components = -0.000611978 Jy ! Clean residual min=-0.003943 max=0.004219 Jy/beam ! Clean residual mean=0.000019 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.247655 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.247655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270494Jy sigma=0.001184 ! Fit after self-cal, rms=0.270494Jy sigma=0.001184 wmodel J1216-1033_S_1997_05_07_yyk\_map.mod ! Writing 50 model components to file: J1216-1033_S_1997_05_07_yyk_map.mod wobs J1216-1033_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J1216-1033_S_1997_05_07_yyk_uvs.fits wwins J1216-1033_S_1997_05_07_yyk\_map.win ! wwins: Wrote 1 windows to J1216-1033_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110854 Jy ! Component: 100 - total flux cleaned = 0.00145974 Jy ! Component: 150 - total flux cleaned = 0.00171424 Jy ! Component: 200 - total flux cleaned = 0.00230779 Jy ! Component: 250 - total flux cleaned = 0.00304536 Jy ! Component: 300 - total flux cleaned = 0.003643 Jy ! Component: 350 - total flux cleaned = 0.00416646 Jy ! Component: 400 - total flux cleaned = 0.00467323 Jy ! Component: 450 - total flux cleaned = 0.00526129 Jy ! Component: 500 - total flux cleaned = 0.00554709 Jy ! Component: 550 - total flux cleaned = 0.0058261 Jy ! Component: 600 - total flux cleaned = 0.00600659 Jy ! Component: 650 - total flux cleaned = 0.00614146 Jy ! Component: 700 - total flux cleaned = 0.0064023 Jy ! Component: 750 - total flux cleaned = 0.00669788 Jy ! Component: 800 - total flux cleaned = 0.00669743 Jy ! Component: 850 - total flux cleaned = 0.00690085 Jy ! Component: 900 - total flux cleaned = 0.00701948 Jy ! Component: 950 - total flux cleaned = 0.00705782 Jy ! Component: 1000 - total flux cleaned = 0.00717281 Jy ! Component: 1050 - total flux cleaned = 0.00713449 Jy ! Component: 1100 - total flux cleaned = 0.00724558 Jy ! Component: 1150 - total flux cleaned = 0.00746291 Jy ! Component: 1200 - total flux cleaned = 0.00753403 Jy ! Component: 1250 - total flux cleaned = 0.00770857 Jy ! Component: 1300 - total flux cleaned = 0.0078108 Jy ! Component: 1350 - total flux cleaned = 0.00784429 Jy ! Component: 1400 - total flux cleaned = 0.00797768 Jy ! Component: 1450 - total flux cleaned = 0.00814131 Jy ! Component: 1500 - total flux cleaned = 0.00817383 Jy ! Component: 1550 - total flux cleaned = 0.00839581 Jy ! Component: 1600 - total flux cleaned = 0.00833364 Jy ! Component: 1650 - total flux cleaned = 0.00839541 Jy ! Component: 1700 - total flux cleaned = 0.00836544 Jy ! Component: 1750 - total flux cleaned = 0.00842589 Jy ! Component: 1800 - total flux cleaned = 0.00842592 Jy ! Component: 1850 - total flux cleaned = 0.0084264 Jy ! Component: 1900 - total flux cleaned = 0.00845482 Jy ! Component: 1950 - total flux cleaned = 0.00839836 Jy ! Component: 2000 - total flux cleaned = 0.00848171 Jy ! Total flux subtracted in 2048 components = 0.00837183 Jy ! Clean residual min=-0.001700 max=0.001519 Jy/beam ! Clean residual mean=-0.000017 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.256027 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 178 components and 0.256027 Jy ![Exited script file: muppet] wmap "J1216-1033_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 9.23 at -1.155 degrees (North through East) ! Clean map min=-0.0030678 max=0.24855 Jy/beam ! Writing clean map to FITS file: J1216-1033_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.248547 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000574079 device "J1216-1033_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J1216-1033_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.692922 0.692922 1.38584 2.77169 5.54338 11.0868 22.1735 44.347 88.694 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.248 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 9.23 at -1.155 degrees (North through East) ! Clean map min=-0.0030678 max=0.24855 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1216-1033_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J1216-1033_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1216-1033_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 18:01:50 2007